COMPMID-3703 Remove OpenCL padding: CLActivationLayerKernel + create utility macro
Change-Id: I73edadc7299247e7bc51ae37c00d3709023da44a
Signed-off-by: Giorgio Arena <giorgio.arena@arm.com>
Reviewed-on: https://review.mlplatform.org/c/ml/ComputeLibrary/+/4073
Tested-by: Arm Jenkins <bsgcomp@arm.com>
Reviewed-by: Gian Marco Iodice <gianmarco.iodice@arm.com>
Comments-Addressed: Arm Jenkins <bsgcomp@arm.com>
diff --git a/src/core/CL/cl_kernels/gemm_helpers.h b/src/core/CL/cl_kernels/gemm_helpers.h
index 6f6edc1..3943a8d 100644
--- a/src/core/CL/cl_kernels/gemm_helpers.h
+++ b/src/core/CL/cl_kernels/gemm_helpers.h
@@ -799,101 +799,6 @@
(BASENAME##F, 0, (__global DATA_TYPE *)(PTR + 15 * STRIDE_Y + Z##F));
/** @} */ // end of groupd STORE_ROW_n
-/** Partially store the 0 to (n-1)th rows of the given variables
- * @name STORE_ROW_PARTIAL_n
- * Within each row, store the lower @p STORE_N0 elements of vectors of width @p N0
- *
- * @note in case @p STORE_N0 != 1, 2, 3, 4, 8, 16, extra vstore(s) will be invoked, thus incurring small performance penalty.
- *
- * @param[in] N0 The width of the passed in vector. Supported: 1, 2, 3, 4, 8, 16
- * @param[in] STORE_N0 The **lower** size of the vectors to store. Supported: [1-16 and <= @p N0
- * @param[in] DATA_TYPE The data type of the vectors
- * @param[in] BASENAME The basename of the variables
- * @param[in] PTR The base pointer
- * @param[in] STRIDE_Y The stride value in y-axis direction
- * @param[in] Z The offset in z-axis direction
- * @{
- */
-#define STORE_ROW_PARTIAL_1(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##0, 0, (__global DATA_TYPE *)(PTR + 0 * STRIDE_Y + Z##0));
-
-#define STORE_ROW_PARTIAL_2(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_1(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##1, 0, (__global DATA_TYPE *)(PTR + 1 * STRIDE_Y + Z##1));
-
-#define STORE_ROW_PARTIAL_3(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_2(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##2, 0, (__global DATA_TYPE *)(PTR + 2 * STRIDE_Y + Z##2));
-
-#define STORE_ROW_PARTIAL_4(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_3(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##3, 0, (__global DATA_TYPE *)(PTR + 3 * STRIDE_Y + Z##3));
-
-#define STORE_ROW_PARTIAL_5(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_4(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##4, 0, (__global DATA_TYPE *)(PTR + 4 * STRIDE_Y + Z##4));
-
-#define STORE_ROW_PARTIAL_6(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_5(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##5, 0, (__global DATA_TYPE *)(PTR + 5 * STRIDE_Y + Z##5));
-
-#define STORE_ROW_PARTIAL_7(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_6(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##6, 0, (__global DATA_TYPE *)(PTR + 6 * STRIDE_Y + Z##6));
-
-#define STORE_ROW_PARTIAL_8(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_7(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##7, 0, (__global DATA_TYPE *)(PTR + 7 * STRIDE_Y + Z##7));
-
-#define STORE_ROW_PARTIAL_9(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_8(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##8, 0, (__global DATA_TYPE *)(PTR + 8 * STRIDE_Y + Z##8));
-
-#define STORE_ROW_PARTIAL_10(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_9(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##9, 0, (__global DATA_TYPE *)(PTR + 9 * STRIDE_Y + Z##9));
-
-#define STORE_ROW_PARTIAL_11(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_10(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##A, 0, (__global DATA_TYPE *)(PTR + 10 * STRIDE_Y + Z##A));
-
-#define STORE_ROW_PARTIAL_12(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_11(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##B, 0, (__global DATA_TYPE *)(PTR + 11 * STRIDE_Y + Z##B));
-
-#define STORE_ROW_PARTIAL_13(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_12(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##C, 0, (__global DATA_TYPE *)(PTR + 12 * STRIDE_Y + Z##C));
-
-#define STORE_ROW_PARTIAL_14(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_13(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##D, 0, (__global DATA_TYPE *)(PTR + 13 * STRIDE_Y + Z##D));
-
-#define STORE_ROW_PARTIAL_15(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_14(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##E, 0, (__global DATA_TYPE *)(PTR + 14 * STRIDE_Y + Z##E));
-
-#define STORE_ROW_PARTIAL_16(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- STORE_ROW_PARTIAL_15(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) \
- VSTORE_PARTIAL(N0, STORE_N0) \
- (BASENAME##F, 0, (__global DATA_TYPE *)(PTR + 15 * STRIDE_Y + Z##F));
-/** @} */ // end of groupd STORE_ROW_PARTIAL_n
-
/** Convert and store the 0th to (n-1)th rows of the given variables
* @name CONVERT_STORE_ROW_n
*
@@ -1008,127 +913,6 @@
#define STORE_BLOCK(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) STORE_BLOCK_STR(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z)
/** @} */ // end of group STORE_BLOCK
-/** Partially store a block of the given size STORE_M0xSTORE_N0
- * @name STORE_BLOCK_PARTIAL
- *
- * @note The vector width @p N0 is also required for correct partial storing behaviour.
- * @note in case @p STORE_N0 != 1, 2, 3, 4, 8, 16, extra vstore(s) will be invoked, thus incurring small performance penalty.
- *
- * The data to store is expected to have consecutive names for each row.
- * E.g., for STORE_M0=3 and basename=c, the expected names are c0, c1 and c2.
- * The Z offset is expected to have consecutive names.
- * E.g., for STORE_M0=3 and Z=zin, the expected z offset names are zin0, zin1 and zin2.
- *
- * @param[in] STORE_M0 The number of rows to store. Supported: 1-16
- * @param[in] STORE_N0 The lower number of elements of vectors to store. Supported: 1-16 and <= @p N0
- * @param[in] N0 The size of each vector. Supported: 1, 2, 3, 4, 8, 16
- * @param[in] DATA_TYPE The data type of the vectors
- * @param[in] BASENAME The basename of the variables
- * @param[in] PTR The base pointer
- * @param[in] STRIDE_Y The stride value in y-axis direction
- * @param[in] Z The offset in z-axis direction
- * @{
- */
-#define STORE_BLOCK_PARTIAL_STR(STORE_M0, STORE_N0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) STORE_ROW_PARTIAL_##STORE_M0(N0, STORE_N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z)
-#define STORE_BLOCK_PARTIAL(STORE_M0, STORE_N0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z) STORE_BLOCK_PARTIAL_STR(STORE_M0, STORE_N0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z)
-/** Store a block that can be partial in both x and y dimensions
- *
- * @note in cases @p PARTIAL_STORE_N0 != 1, 2, 3, 4, 8, 16, extra vstore(s) will be invoked, thus incurring small performance penalty.
- *
- * The data to store is expected to have consecutive names for each row.
- * E.g., for M0=3 and basename=c, the expected names are c0, c1 and c2.
- * The Z offset is expected to have consecutive names.
- * E.g., for M0=3 and Z=zin, the expected z offset names are zin0, zin1 and zin2.
- *
- * @param[in] M0 The number of rows to store, for non-partial blocks. Supported: 1-16
- * @param[in] N0 The size of each vector, for non-partial blocks. Supported: 1, 2, 3, 4, 8, 16
- * @param[in] DATA_TYPE The data type of the vectors
- * @param[in] BASENAME The basename of the variables
- * @param[in] PTR The base pointer
- * @param[in] STRIDE_Y The stride value in y-axis direction
- * @param[in] Z The offset in z-axis direction
- * @param[in] PARTIAL_STORE_M0 The partial size in y, for partial blocks. Supported range: [1, @p M0)
- * @param[in] PARTIAL_STORE_N0 The partial size in x, for partial blocks. Supported range: [1, @p N0)
- * @param[in] N Total number of columns. Used to detect if current block is at the boundary in x.
- * @param[in] PARTIAL_COND_Y Condition on the y axis to perform the partial store Y. True to use PARTIAL_STORE_M0 rather than M0.
- * @param[in] PARTIAL_COND_X Condition on the x axis to perform the partial store X. True to use PARTIAL_STORE_N0 rather than N0.
- */
-#define STORE_BLOCK_PARTIAL_IN_X_AND_Y(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z, PARTIAL_STORE_M0, PARTIAL_STORE_N0, N, PARTIAL_COND_Y, PARTIAL_COND_X) \
- if(!(PARTIAL_COND_X) && !(PARTIAL_COND_Y)) \
- { \
- STORE_BLOCK_PARTIAL(M0, N0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z); \
- } \
- else if((PARTIAL_COND_Y) && !(PARTIAL_COND_X)) \
- { \
- STORE_BLOCK_PARTIAL(PARTIAL_STORE_M0, N0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z); \
- } \
- else if(!(PARTIAL_COND_Y) && (PARTIAL_COND_X)) \
- { \
- STORE_BLOCK_PARTIAL(M0, PARTIAL_STORE_N0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z); \
- } \
- else \
- { \
- STORE_BLOCK_PARTIAL(PARTIAL_STORE_M0, PARTIAL_STORE_N0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z); \
- }
-/** Store a block that can only be partial in x but not y.
- *
- * @note in case @p N0 or @p PARTIAL_STORE_N0 != 1, 2, 3, 4, 8, 16, extra vstore(s) will be invoked, thus incurring small performance penalty.
- *
- * The data to store is expected to have consecutive names for each row.
- * E.g., for M0=3 and basename=c, the expected names are c0, c1 and c2.
- * The Z offset is expected to have consecutive names.
- * E.g., for M0=3 and Z=zin, the expected z offset names are zin0, zin1 and zin2.
- *
- * @param[in] M0 The number of rows to store, for non-partial blocks. Supported: 1-16
- * @param[in] N0 The size of each vector, for non-partial blocks. Supported: 1, 2, 3, 4, 8, 16
- * @param[in] DATA_TYPE The data type of the vectors
- * @param[in] BASENAME The basename of the variables
- * @param[in] PTR The base pointer
- * @param[in] STRIDE_Y The stride value in y-axis direction
- * @param[in] Z The offset in z-axis direction
- * @param[in] PARTIAL_STORE_N0 The partial size in x, for partial blocks. Supported range: [1, @p N0)
- * @param[in] N Total number of columns. Used to detect if current block is at the boundary in x.
- * @param[in] PARTIAL_COND_X Condition on the x axis to perform the partial store X. True to use PARTIAL_STORE_N0 rather than N0.
- */
-#define STORE_BLOCK_PARTIAL_IN_X(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z, PARTIAL_STORE_N0, N, PARTIAL_COND_X) \
- if(!(PARTIAL_COND_X)) \
- { \
- STORE_BLOCK_PARTIAL(M0, N0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z); \
- } \
- else \
- { \
- STORE_BLOCK_PARTIAL(M0, PARTIAL_STORE_N0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z); \
- }
-/** Store a block that can only be partial in y but not x.
- *
- * @note in case @p N0 or @p PARTIAL_STORE_N0 != 1, 2, 3, 4, 8, 16, extra vstore(s) will be invoked, thus incurring small performance penalty.
- *
- * The data to store is expected to have consecutive names for each row.
- * E.g., for M0=3 and basename=c, the expected names are c0, c1 and c2.
- * The Z offset is expected to have consecutive names.
- * E.g., for M0=3 and Z=zin, the expected z offset names are zin0, zin1 and zin2.
- *
- * @param[in] M0 The number of rows to store, for non-partial blocks. Supported: 1-16
- * @param[in] N0 The size of each vector, for non-partial blocks. Supported: 1, 2, 3, 4, 8, 16
- * @param[in] DATA_TYPE The data type of the vectors
- * @param[in] BASENAME The basename of the variables
- * @param[in] PTR The base pointer
- * @param[in] STRIDE_Y The stride value in y-axis direction
- * @param[in] Z The offset in z-axis direction
- * @param[in] PARTIAL_STORE_M0 The partial size in y, for partial blocks. Supported range: [1, @p M0)
- * @param[in] PARTIAL_COND_Y Condition on the y axis to perform the partial store Y. True to use PARTIAL_STORE_M0 rather than M0.
- */
-#define STORE_BLOCK_PARTIAL_IN_Y(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z, PARTIAL_STORE_M0, PARTIAL_COND_Y) \
- if(!(PARTIAL_COND_Y)) \
- { \
- STORE_BLOCK_PARTIAL(M0, N0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z); \
- } \
- else \
- { \
- STORE_BLOCK_PARTIAL(PARTIAL_STORE_M0, N0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z); \
- }
-/** @} */ // end of group STORE_BLOCK_PARTIAL
-
/** Convert and store a block of the given size M0xN0
* @name CONVERT_STORE_BLOCK
*
@@ -1732,113 +1516,4 @@
*/
#define CONVERT_BLOCK_STR(M, N, DATA_TYPE, BASENAME_SRC, BASENAME_DST) CONVERT_ROW_##M(N, DATA_TYPE, BASENAME_SRC, BASENAME_DST)
#define CONVERT_BLOCK(M, N, DATA_TYPE, BASENAME_SRC, BASENAME_DST) CONVERT_BLOCK_STR(M, N, DATA_TYPE, BASENAME_SRC, BASENAME_DST)
-/** @} */ // end of group CONVERT_BLOCK
-
-#if defined(PARTIAL_STORE_M0) && defined(PARTIAL_STORE_N0)
-
-/** Boundary-aware GEMM block store
- * @name STORE_BLOCK_BOUNDARY_AWARE
- * This macro assumes the following schemes to achieve boundary-awareness:
- * - Overlapping load in Y axis from lhs tensor. This implies lhs has no padding along y dim.
- * - Non-Overlapping(normal) load from rhs tensor. This imples rhs can have paddings.
- * - Overlapping load in Y axis from bias tensor. This implies rhs has no padding along y dim.
- * The macro then ensures that the dst tensor can be stored without any paddings in both x and y dim.
- *
- * In the y dimension, we place the partial blocks **at the beginning** while in the x dimension, we place the partial
- * blocks **at the end**.
- * Say, the dst tensor is of shape MxN and we have M0 and N0 as the block size, this is how we define "partial blocks"/
- * "boundary block" (we use the 2 terms "partial blocks" and "boundary blocks" interchangeably) and its various parameters:
- *
- * *--x--> x == 0 x == 1
- * | |<------------------------------N-------------------------->|
- * y |<--------------N0------------->|<----PARTIAL_STORE_N0----->|
- * | -------------#############################################################
- * * | | |...............................|...........................|
- * y == 0 | PAR_..._M0 |......Boundary block in y......|.Boundary block in x and y.|
- * | | |...............................|...........................|
- * M --#############################################################
- * | | | |...........................|
- * y == 1 | M0 | Non-boundary block |....Boundary block in x....|
- * | | | |...........................|
- * |------------#############################################################
- *
- * Then @p PARTIAL_STORE_M0 = M % M0 and @p PARTIAL_STORE_N0 = N % N0
- *
- * @note in cases @p PARTIAL_STORE_N0 != 1, 2, 3, 4, 8, 16, extra vstore(s) will be invoked, thus incurring small performance penalty.
- *
- * It automatically detects if a giving M,N,M0,N0 combination can yield partial blocks in either X and Y dimension,
- * and select corresponding store methods such that the boundary detection logic is only added when needed.
- *
- * The data to store is expected to have consecutive names for each row.
- * E.g., for M0=3 and basename=c, the expected names are c0, c1 and c2.
- * The Z offset is expected to have consecutive names.
- * E.g., for M0=3 and Z=zin, the expected z offset names are zin0, zin1 and zin2.
- *
- * @param[in] M0 The number of rows to store, for non-partial blocks. Supported: 1-16
- * @param[in] N0 The size of each vector, for non-partial blocks. Supported: 1, 2, 3, 4, 8, 16
- * @param[in] DATA_TYPE The data type of the vectors
- * @param[in] BASENAME The basename of the variables
- * @param[in] PTR The base pointer
- * @param[in] STRIDE_Y The stride value in y-axis direction
- * @param[in] Z The offset in z-axis direction
- * @param[in] PARTIAL_STORE_M0 The partial size in y, for partial blocks. Supported: [0, @p M0)
- * @param[in] PARTIAL_STORE_N0 The partial size in x, for partial blocks. Supported: [0, @p N0)
- * @param[in] N Total number of columns. Used to detect if current block is at the boundary in x.
- * @param[in] PARTIAL_COND_Y Condition on the y axis to perform the partial store Y. True to use PARTIAL_STORE_M0 rather than M0.
- * @param[in] PARTIAL_COND_X Condition on the x axis to perform the partial store X. True to use PARTIAL_STORE_N0 rather than N0.
- * @{
- */
-#if PARTIAL_STORE_M0 == 0 && PARTIAL_STORE_N0 == 0
-// Case1: No partial blocks in either x or y
-#define STORE_BLOCK_BOUNDARY_AWARE(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z, PARTIAL_STORE_M0, PARTIAL_STORE_N0, N, PARTIAL_COND_Y, PARTIAL_COND_X) \
- STORE_BLOCK(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z)
-
-#elif PARTIAL_STORE_M0 > 0 && PARTIAL_STORE_N0 == 0
-// Case2: Partial blocks in y
-#define STORE_BLOCK_BOUNDARY_AWARE(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z, PARTIAL_STORE_M0, PARTIAL_STORE_N0, N, PARTIAL_COND_Y, PARTIAL_COND_X) \
- STORE_BLOCK_PARTIAL_IN_Y(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z, PARTIAL_STORE_M0, PARTIAL_COND_Y)
-
-#elif PARTIAL_STORE_M0 == 0 && PARTIAL_STORE_N0 > 0
-// Case3: Partial blocks in x
-#define STORE_BLOCK_BOUNDARY_AWARE(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z, PARTIAL_STORE_M0, PARTIAL_STORE_N0, N, PARTIAL_COND_Y, PARTIAL_COND_X) \
- STORE_BLOCK_PARTIAL_IN_X(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z, PARTIAL_STORE_N0, N, PARTIAL_COND_X)
-
-#else // PARTIAL_STORE_M0 == 0 && PARTIAL_STORE_N0 == 0
-// Case4: Partial blocks in both x and y
-#define STORE_BLOCK_BOUNDARY_AWARE(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z, PARTIAL_STORE_M0, PARTIAL_STORE_N0, N, PARTIAL_COND_Y, PARTIAL_COND_X) \
- STORE_BLOCK_PARTIAL_IN_X_AND_Y(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z, PARTIAL_STORE_M0, PARTIAL_STORE_N0, N, PARTIAL_COND_Y, PARTIAL_COND_X)
-
-#endif // PARTIAL_STORE_M0 == 0 && PARTIAL_STORE_N0 == 0
-
-#else // defined(PARTIAL_STORE_M0) && defined(PARTIAL_STORE_N0)
-
-#define STORE_BLOCK_BOUNDARY_AWARE(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z, PARTIAL_STORE_M0, PARTIAL_STORE_N0, N, PARTIAL_COND_Y, PARTIAL_COND_X) \
- STORE_BLOCK(M0, N0, DATA_TYPE, BASENAME, PTR, STRIDE_Y, Z)
-
-#endif // defined(PARTIAL_STORE_M0) && defined(PARTIAL_STORE_N0)
-/** @} */ // end of group STORE_BLOCK_BOUNDARY_AWARE
-
-#if defined(PARTIAL_STORE_M0)
-/** Compute the start m0 row (LHS, BIAS and DST) in a boundary-aware way so as to avoid padding
- * @name COMPUTE_M0_START_ROW
- * If there're any partial blocks in y dimension, they are placed at the beginning of the rows.
- * This shift amount is added to all rows such that the partial block (at the beginning) overlaps with the subsequent
- * blocks in the y dimension to avoid any padding.
- * EG: M0=4, PARTIAL_STORE_M0=1:
- * | Non-overlapping | +M0_ROW_SHIFT (Overlapping)
- * block 0 (partial)| start row = 0 | start row = 0
- * block 1 (full) | start row = 4 | start row = 1
- * block 2 (full) | start row = 8 | start row = 5
- *
- * @param[in] y Global id of current block in y.
- * @param[in] M0 The number of rows to store, for non-partial blocks. Supported: 1-16
- * @param[in] PARTIAL_STORE_M0 The partial size in y, for partial blocks. Supported: [0, @p M0)
- * @{
- */
-#define COMPUTE_M0_START_ROW(y, M0, PARTIAL_STORE_M0) \
- ((uint)(max(0, (int)(y * M0) - (int)((M0 - PARTIAL_STORE_M0) % M0))))
-#else // defined(PARTIAL_STORE_M0)
-#define COMPUTE_M0_START_ROW(y, M0, PARTIAL_STORE_M0) \
- ((uint)(y * M0))
-#endif // defined(PARTIAL_STORE_M0)
-/** @} */ // end of group COMPUTE_M0_START_ROW
+/** @} */ // end of group CONVERT_BLOCK
\ No newline at end of file