diff --git a/CMakeLists.txt b/CMakeLists.txt
index 6e9d80e..2a5b813 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -25,7 +25,7 @@
 #
 
 option(DRIVER_PMU_AUTOINIT "Enable PMU boot auto-initialization" OFF)
-option(LOG_SUPPORT "Enable logging." ON)
+option(DRIVER_LOG_SUPPORT "Enable logging." OFF)
 
 set(CMSIS_PATH "${CMAKE_CURRENT_SOURCE_DIR}/../cmsis" CACHE PATH "Path to CMSIS.")
 
@@ -39,13 +39,10 @@
     add_compile_definitions(CPU_CORTEX_M3)
 elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL "cortex-m33")
     add_compile_definitions(CPU_CORTEX_M33)
-    add_compile_definitions(__DSP_PRESENT=1)
 elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL "cortex-m4")
     add_compile_definitions(CPU_CORTEX_M4)
 elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL "cortex-m55")
     add_compile_definitions(CPU_CORTEX_M55)
-    add_compile_definitions(__DSP_PRESENT=1)
-    add_compile_definitions(__FPU_PRESENT=1)
 elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL "cortex-m7")
     add_compile_definitions(CPU_CORTEX_M7)
 else()
@@ -53,7 +50,7 @@
 endif()
 
 # Enable logging support
-if (LOG_SUPPORT)
+if(DRIVER_LOG_SUPPORT)
     add_compile_definitions(LOG_ENABLED)
 endif()
 
@@ -71,7 +68,7 @@
 target_sources(ethosu_core_driver PRIVATE src/ethosu_driver.c src/ethosu_device.c src/ethosu_pmu.c)
 
 # Build PMU
-if (DRIVER_PMU_AUTOINIT)
+if(DRIVER_PMU_AUTOINIT)
     set(NPU_PMCR        "0x0" CACHE STRING "Register control b0 = CNT_EN = Enable counters (RW), b1 = EVENT_CNT_RST = Reset event counters (WO), b2 = CYCLE_CNT_RST = Reset cycle counter (WO), b[15:11] = Number of event counters (RO)")
     set(NPU_PMCNTENSET  "0x0" CACHE STRING "Bit k enables event counter k. k=31 enables the cycle counter. Read value is current status.")
     set(NPU_PMCNTENCLR  "0x0" CACHE STRING "Bit k disables event counter k. k=31 disables the cycle counter. Reda value is current status.")
@@ -92,8 +89,7 @@
         INIT_PMINTSET=${NPU_PMINTSET}
         INIT_PMINTCLR=${NPU_PMINTCLR}
         INIT_PMCCNTR=${NPU_PMCCNTR}
-        INIT_PMCCNTR_CFG=${NPU_PMCCNTR_CFG}
-    )
+        INIT_PMCCNTR_CFG=${NPU_PMCCNTR_CFG})
 endif()
 
 #
@@ -103,6 +99,6 @@
 message(STATUS "*******************************************************")
 message(STATUS "PROJECT_NAME                           : ${PROJECT_NAME}")
 message(STATUS "CMAKE_SYSTEM_PROCESSOR                 : ${CMAKE_SYSTEM_PROCESSOR}")
-message(STATUS "LOG_SUPPORT                            : ${LOG_SUPPORT}")
 message(STATUS "CMSIS_PATH                             : ${CMSIS_PATH}")
+message(STATUS "DRIVER_LOG_SUPPORT                     : ${DRIVER_LOG_SUPPORT}")
 message(STATUS "*******************************************************")
diff --git a/src/ethosu_driver.c b/src/ethosu_driver.c
index 3bad2ac..01ec389 100644
--- a/src/ethosu_driver.c
+++ b/src/ethosu_driver.c
@@ -189,9 +189,8 @@
     int return_code = 0;
     LOG_INFO("ethosu_init calling NPU embed driver ethosu_dev_init\n");
 
-#ifdef FPGA
     ethosu_soft_reset();
-#endif
+
     if (ETHOSU_SUCCESS != ethosu_wait_for_reset())
     {
         LOG_ERR("Failed reset of Ethos-U\n");