/*
 * Copyright (c) 2019-2022 Arm Limited. All rights reserved.
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the License); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * Corstone-310 is the next generation Corstone-300 where the CPU
 * has been upgraded to Cortex-M85.
 *
 * This is a simplified picture of the Corstone-310 memory system.
 * Please refer to the Corstone SSE-310 Technical Reference Manual for
 * further information.
 *
 * https://developer.arm.com/ip-products/subsystem/corstone/corstone-300
 *
 * +---------------+   +---------------+  +------+
 * | Ethos-U55     |   | Cortex-M85    +--+ ITCM |
 * |               |   |               |  +------+
 * |               |   |               |
 * |               |   |               |  +------+
 * |  M1      M0   |   |               +--+ DTCM |
 * +---+-------+---+   +-------+-------+  +------+
 *     |       |               |
 *     |   +---+---------------+-----+
 *     |   | AMBA AXI NIC-400-Lite   |
 *     |   +---+-----------------+---+
 *     |       |                 |
 * +---+-------+------------+ +--+-------+
 * | AMBA AXI NIC-400       | | SSE-300  |
 * +---+--------+--------+--+ | SRAM     |
 *     |        |        |    +----------+
 * +---+---+ +--+---+ +--+--+
 * | Flash | | BRAM | | DDR |
 * +-------+ +------+ +-----+
 *
 * +-----------------------+-------------+-------------+----+--------------------------------------+
 * |  Memory region name   | Base addr   |    Size     |IDAU|  MCC load address + remarks          |
 * +-----------------------+-------------+-------------+----+--------------------------------------+
 * | ITCM                  | 0x0000_0000 | 0x0000_8000 | NS | 32 kiB                               |
 * | ITCM                  | 0x1000_0000 | 0x0000_8000 | S  | Secure alias for NS ITCM             |
 * | FPGA Data SRAM; BRAM  | 0x0100_0000 | 0x0020_0000 | NS | 2 MiB                                |
 * | FPGA data SRAM; BRAM  | 0x1100_0000 | 0x0020_0000 | S  | Secure alias for NS BRAM             |
 * | DTCM                  | 0x2000_0000 | 0x0000_8000 | NS | 32 kiB                               |
 * | DTCM                  | 0x3000_0000 | 0x0000_8000 | S  | Secure alias for NS DTCM             |
 * | SSE-300 internal SRAM | 0x2100_0000 | 0x0040_0000 | NS | 2 banks of 2 MiB; 3 cycles latency   |
 * | SSE-300 internal SRAM | 0x3100_0000 | 0x0040_0000 | S  | Secure alias for NS internal SRAM    |
 * | DDR                   | 0x6000_0000 | 0x1000_0000 | NS | 256 MB bank                          |
 * | DDR                   | 0x7000_0000 | 0x1000_0000 | S  | Secure alias for NS DDR              |
 * +-----------------------+-------------+-------------+----+--------------------------------------+
 *
 *  Note: Ethos-U55 can access BRAM, internal SRAM and the DDR sections => activation buffers and
 *        the model should only be placed in those regions.
 *
 *  Note: Alias regions means that secure and non-secure addresses are mapped to the same physical
 *        memory banks.
 */

/* default value - '1', for DRAM */
#ifndef ETHOSU_MODEL
#define ETHOSU_MODEL  1
#endif

/* default value - '1', for DRAM */
#ifndef ETHOSU_ARENA
#define ETHOSU_ARENA  1
#endif

#ifndef STACK_SIZE
#define STACK_SIZE 0x8000
#endif

#ifndef HEAP_SIZE
#define HEAP_SIZE 0x10000
#endif

#define ITCM_START 0x10000000
#define ITCM_SIZE  0x00008000

#define DTCM_START 0x30000000
#define DTCM_SIZE  0x00008000

#define BRAM_START 0x11000000
#define BRAM_SIZE  0x00200000

#define SRAM_START 0x31000000
#define SRAM_SIZE  0x00400000

#define DDR_START  0x70000000
#define DDR_SIZE   0x10000000

#if STACK_SIZE > DTCM_SIZE
#error Stack size larger than DTCM size
#endif

/* ----------------------------------------------------------------------------
  Stack seal size definition
 *----------------------------------------------------------------------------*/

APP_IMAGE BRAM_START BRAM_SIZE
{
    rom_exec BRAM_START BRAM_SIZE
    {
        *.o (RESET, +First)
        *(InRoot$$Sections)
        startup_ARMCM55.o
        system_ARMCM55.o
        target.o
        .ANY1 (+RO +RW +ZI)
    }

    ARM_LIB_HEAP +0 EMPTY ALIGN 8 HEAP_SIZE {}
    ARM_LIB_STACK DTCM_START EMPTY ALIGN 8 STACK_SIZE {}
}

; Place all SRAM and DDR execution regions in DDR. We have plenty of DDR
; and can perform scatter loading from here.
LOAD_REGION_DDR DDR_START DDR_SIZE
{
    ; Place model and its affiliates in DRAM
    rom_dram DDR_START
    {
#if (ETHOSU_MODEL == 1)
        * (network_model_sec)
#endif
        * (input_data_sec)
        * (expected_output_data_sec)
        * (output_data_sec)
    }

#if (ETHOSU_ARENA == 1)
    ; Place tensor arena in DRAM if we have a fast memory area
    ARENA +0 UNINIT ALIGN 16
    {
        * (.bss.tensor_arena)
    }
#endif

    SRAM SRAM_START ALIGN 16 SRAM_SIZE
    {
#if (ETHOSU_MODEL == 0)
        ; Place network model in SRAM
        * (network_model_sec)
#endif

#if (ETHOSU_ARENA == 0)
        ; Place tensor arena in SRAM
        * (.bss.tensor_arena)
#endif

        ; Place scratch buffer in SRAM
        * (.bss.ethosu_scratch)

        ; SRAM data
        * (.sram.data)
    }
}