/*
 * Copyright (c) 2019-2021 Arm Limited. All rights reserved.
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the License); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * This is a simplified picture of the Corstone-300 memory system.
 * Please refer to the Corstone SSE-300 Technical Reference Manual for
 * further information.
 *
 * https://developer.arm.com/ip-products/subsystem/corstone/corstone-300
 *
 * +---------------+   +---------------+  +------+
 * | Ethos-U55     |   | Cortex-M55    +--+ ITCM |
 * |               |   |               |  +------+
 * |               |   |               |
 * |               |   |               |  +------+
 * |  M1      M0   |   |               +--+ DTCM |
 * +---+-------+---+   +-------+-------+  +------+
 *     |       |               |
 *     |   +---+---------------+-----+
 *     |   | AMBA AXI NIC-400-Lite   |
 *     |   +---+-----------------+---+
 *     |       |                 |
 * +---+-------+------------+ +--+-------+
 * | AMBA AXI NIC-400       | | SSE-300  |
 * +---+--------+--------+--+ | SRAM     |
 *     |        |        |    +----------+
 * +---+---+ +--+---+ +--+--+
 * | Flash | | BRAM | | DDR |
 * +-------+ +------+ +-----+
 *
 * +-----------------------+-------------+-------------+----+--------------------------------------+
 * |  Memory region name   | Base addr   |    Size     |IDAU|  MCC load address + remarks          |
 * +-----------------------+-------------+-------------+----+--------------------------------------+
 * | ITCM                  | 0x0000_0000 | 0x0008_0000 | NS | 0x0000_0000; 512 kiB                 |
 * | ITCM                  | 0x1000_0000 | 0x0008_0000 | S  | Secure alias for NS ITCM             |
 * | FPGA Data SRAM; BRAM  | 0x0100_0000 | 0x0010_0000 | NS | 0x0100_0000; 1 MiB                   |
 * | FPGA data SRAM; BRAM  | 0x1100_0000 | 0x0010_0000 | S  | Secure alias for NS BRAM             |
 * | DTCM                  | 0x2000_0000 | 0x0008_0000 | NS | 512 kiB; 4 banks of 128k each        |
 * | DTCM                  | 0x3000_0000 | 0x0008_0000 | S  | Secure alias for NS DTCM             |
 * | SSE-300 internal SRAM | 0x2100_0000 | 0x0020_0000 | NS | 1 bank of 2 MiB; 3cc latency)        |
 * | SSE-300 internal SRAM | 0x3100_0000 | 0x0020_0000 | S  | Secure alias for NS internal SRAM    |
 * | QSPI external flash   | 0x2800_0000 | 0x0080_0000 | NS | 8MB                                  |
 * | QSPI external flash   | 0x3800_0000 | 0x0080_0000 | S  | 8MB                                  |
 * | DDR                   | 0x6000_0000 | 0x1000_0000 | NS | 0x0800_0000; 256 MiB bank            |
 * | DDR                   | 0x7000_0000 | 0x1000_0000 | S  | 0x0C00_0000; 256 MiB bank            |
 * +-----------------------+-------------+-------------+----+--------------------------------------+
 *
 *  Note: Ethos-U55 can access BRAM, internal SRAM and the DDR sections => activation buffers and
 *        the model should only be placed in those regions.
 *
 *  Note: Alias regions means that secure and non-secure addresses are mapped to the same physical
 *        memory banks.
 */

#ifndef ETHOSU_MODEL
  /* default value - '1', for DRAM */
  #define ETHOSU_MODEL  1
#endif

#ifndef ETHOSU_ARENA
  /* default value - '1', for DRAM */
  #define ETHOSU_ARENA  1
#endif

#ifndef STACK_SIZE
#define STACK_SIZE 0x8000
#endif

#ifndef HEAP_SIZE
#define HEAP_SIZE 0x10000
#endif

#if defined(TRUSTZONE_BUILD) && !defined(ETHOSU_TEST)
/*
 * Include trustzone.h with common addresses and sizes.
 * The build configuration sets whether TRUSTZONE_SECURE is set or
 * TRUSTZONE_NONSECURE which sets the memory start addresses and sizes.
 */

#include "trustzone.h"
#define USE_TRUSTZONE

#else //TRUSTZONE_BUILD

#define LR_START   0x10000000
#define LR_SIZE    0x00080000

#define ITCM_START 0x10000000
#define ITCM_SIZE  0x00080000

#define BRAM_START 0x11000000
#define BRAM_SIZE  0x00100000

#define DTCM_START 0x30000000
#define DTCM_SIZE  0x00080000

#define SRAM_START 0x31000000
#define SRAM_SIZE  0x00200000

#define QSPI_START 0x38000000
#define QSPI_SIZE  0x00800000

#define DDR_START  0x70000000
#define DDR_SIZE   0x02000000

#define STACK_HEAP 0x30080000

#endif //TRUSTZONE_BUILD

/* ----------------------------------------------------------------------------
  Stack seal size definition
 *----------------------------------------------------------------------------*/
#if defined(USE_TRUSTZONE) && defined(TRUSTZONE_SECURE)
#define __STACKSEAL_SIZE   ( 8 )
#else
#define __STACKSEAL_SIZE   ( 0 )
#endif

APP_IMAGE LR_START LR_SIZE
{
    ; ITCM 512kB
    rom_exec ITCM_START ITCM_SIZE
    {
        *.o (RESET, +First)
        *(InRoot$$Sections)
        ; Make sure reset_handler ends up in root segment, when split across
        ; ITCM and DTCM
        startup_ARMCM55.o
        .ANY (+RO)
    }

#if defined(USE_TRUSTZONE) && defined(TRUSTZONE_SECURE)
    ; MPS3 BRAM
    ; Shared between Cortex-M and the NPU
    BRAM BRAM_START (BRAM_SIZE - TZ_NSC_SIZE)
    {
        * (.sram.data)
    }

    ROM_NSC TZ_NSC_START TZ_NSC_SIZE
    {
        *(Veneer$$CMSE)
    }
#else
    ; MPS3 BRAM
    BRAM BRAM_START BRAM_SIZE
    {
        * (.sram.data)
    }
#endif

    ; DTCM 512kB
    ; Only accessible from the Cortex-M
    DTCM DTCM_START (DTCM_SIZE - STACK_SIZE - HEAP_SIZE - __STACKSEAL_SIZE)
    {
        .ANY1 (+RW +ZI)
    }

    ; 2MB SSE-300 SRAM (3 cycles read latency) from M55/U55
    SRAM SRAM_START SRAM_SIZE
    {
    #if (ETHOSU_MODEL == 0)
        ; Place network model in SRAM
        * (network_model_sec)
    #endif

    #if (ETHOSU_ARENA == 0)
        ; Place tensor arena in SRAM
        * (.bss.tensor_arena)
    #endif

    ; Place scratch buffer in SRAM
    * (.bss.ethosu_scratch)
    }

    ARM_LIB_HEAP  (STACK_HEAP - STACK_SIZE - __STACKSEAL_SIZE - HEAP_SIZE) EMPTY ALIGN 8 HEAP_SIZE {}
    ARM_LIB_STACK (STACK_HEAP - STACK_SIZE - __STACKSEAL_SIZE) EMPTY ALIGN 8 STACK_SIZE {}

#if defined(USE_TRUSTZONE) && defined(TRUSTZONE_SECURE)
    STACKSEAL +0 EMPTY __STACKSEAL_SIZE {
        ; Reserve empty region for stack seal immediately after stack
    }
#endif
}

LOAD_REGION_1 DDR_START DDR_SIZE
{
    ; 2GB DDR4 available
    rom_dram DDR_START
#if defined(USE_TRUSTZONE) && defined(TRUSTZONE_NONSECURE)
    {
    }
#else //trustzone secure or non-trustzone
    ; Place model and its affiliates in DRAM
    {
    #if (ETHOSU_MODEL == 1)
        * (network_model_sec)
    #endif
        * (input_data_sec)
        * (expected_output_data_sec)
        * (output_data_sec)
    }

    #if (ETHOSU_ARENA == 1)
        ; Place tensor arena in DRAM if we have a fast memory area
        ARENA +0 UNINIT ALIGN 16
        {
            * (.bss.tensor_arena)
        }
    #endif
#endif
}