diff --git a/SUPPORTED_OPS.md b/SUPPORTED_OPS.md
index 9c2a9f4..f96bd4a 100644
--- a/SUPPORTED_OPS.md
+++ b/SUPPORTED_OPS.md
@@ -1,14 +1,13 @@
 # Supported Ops
 
 This file was automatically generated by Vela using the `--supported-ops-report` parameter.  
-Vela version: `3.1.0rc2.dev6+g4f87092`
+Vela version: `3.1.1.dev13+gf54e94a.d20210914`
 
 This file complies with
 [**Gitiles Markdown syntax**](https://github.com/google/gitiles/blob/master/Documentation/markdown.md)
 
 Summary table of constraints for:
 - [TFLite](#tflite-summary-table)
-- [TOSA](#tosa-summary-table)
 
 ## TFLite Summary Table
 
@@ -25,6 +24,7 @@
 | CONCATENATION | [Generic](#tflite-generic-constraints), [Specific](#tflite-concatenation-constraints) |
 | CONV_2D | [Generic](#tflite-generic-constraints), [Specific](#tflite-conv_2d-constraints) |
 | DEPTHWISE_CONV_2D | [Generic](#tflite-generic-constraints), [Specific](#tflite-depthwise_conv_2d-constraints) |
+| EXPAND_DIMS | [Generic](#tflite-generic-constraints), [Specific](#tflite-expand_dims-constraints) |
 | FULLY_CONNECTED | [Generic](#tflite-generic-constraints), [Specific](#tflite-fully_connected-constraints) |
 | HARD_SWISH | [Generic](#tflite-generic-constraints), [Specific](#tflite-hard_swish-constraints) |
 | LEAKY_RELU | [Generic](#tflite-generic-constraints), [Specific](#tflite-leaky_relu-constraints) |
@@ -40,13 +40,13 @@
 | RELU | [Generic](#tflite-generic-constraints) |
 | RELU6 | [Generic](#tflite-generic-constraints) |
 | RELU_N1_TO_1 | [Generic](#tflite-generic-constraints) |
-| RESHAPE | [Generic](#tflite-generic-constraints) |
+| RESHAPE | [Generic](#tflite-generic-constraints), [Specific](#tflite-reshape-constraints) |
 | RESIZE_BILINEAR | [Generic](#tflite-generic-constraints), [Specific](#tflite-resize_bilinear-constraints) |
 | SLICE | [Generic](#tflite-generic-constraints) |
 | SOFTMAX | [Generic](#tflite-generic-constraints), [Specific](#tflite-softmax-constraints) |
 | SPLIT | [Generic](#tflite-generic-constraints) |
 | SPLIT_V | [Generic](#tflite-generic-constraints), [Specific](#tflite-split_v-constraints) |
-| SQUEEZE | [Generic](#tflite-generic-constraints) |
+| SQUEEZE | [Generic](#tflite-generic-constraints), [Specific](#tflite-squeeze-constraints) |
 | STRIDED_SLICE | [Generic](#tflite-generic-constraints), [Specific](#tflite-strided_slice-constraints) |
 | SUB | [Generic](#tflite-generic-constraints), [Specific](#tflite-sub-constraints) |
 | TANH | [Generic](#tflite-generic-constraints) |
@@ -60,7 +60,7 @@
 - Input(s) and Output tensors must not be dynamic
 - Input(s) and Output tensors must have a defined shape
 - Output tensors cannot be scalar
-- Scalar Input tensors are only valid for op type: ADD, MAXIMUM, MEAN, MINIMUM, MUL, SPLIT, SPLIT_V, SUB
+- Scalar Input tensors are only valid for op type: ADD, EXPAND_DIMS, MAXIMUM, MEAN, MINIMUM, MUL, SPLIT, SPLIT_V, SUB
 - Input(s) and Output tensors must not be greater than 4D
 - Input(s), Output and Weight tensors must have quantization parameters
 - Input(s), Output and Weight tensors with quantization scales must be finite
@@ -148,6 +148,12 @@
 - IFM Tensor batch size must be 1
 - For depth multipliers > 1, IFM channels must be 1 and OFM channels must be equal to the depth multiplier
 
+### TFLite EXPAND_DIMS Constraints
+
+This is a list of constraints that the EXPAND_DIMS operator must satisfy in order to be scheduled on the NPU.
+
+- Input and output quantisation must match.
+
 ### TFLite FULLY_CONNECTED Constraints
 
 This is a list of constraints that the FULLY_CONNECTED operator must satisfy in order to be scheduled on the NPU.
@@ -244,6 +250,12 @@
 - The pad tensor can only pad width and height
 - Pad tensor must be of type: int32, int64
 
+### TFLite RESHAPE Constraints
+
+This is a list of constraints that the RESHAPE operator must satisfy in order to be scheduled on the NPU.
+
+- Input and output quantisation must match.
+
 ### TFLite RESIZE_BILINEAR Constraints
 
 This is a list of constraints that the RESIZE_BILINEAR operator must satisfy in order to be scheduled on the NPU.
@@ -268,6 +280,12 @@
 
 - Only one size is allowed to be inferred
 
+### TFLite SQUEEZE Constraints
+
+This is a list of constraints that the SQUEEZE operator must satisfy in order to be scheduled on the NPU.
+
+- Input and output quantisation must match.
+
 ### TFLite STRIDED_SLICE Constraints
 
 This is a list of constraints that the STRIDED_SLICE operator must satisfy in order to be scheduled on the NPU.
@@ -310,51 +328,3 @@
 - SAME padding: OFM dimensions must equal IFM dimensions multiplied by stride
 - VALID padding: OFM dimensions must equal IFM dimensions multiplied by stride,  
                   minus difference between kernel size and stride
-
-## TOSA Summary Table
-
-The table below contains TOSA operators that can be placed on the Ethos-U NPU.  
-Note: There is limited support for compiling a TOSA neural network (EXPERIMENTAL).  
-The related constraints have not yet been populated in the list.
-
-| Operator | TOSA Constraints |
-| --- | --- |
-| ABS | [Generic](#tosa-generic-constraints) |
-| ADD | [Generic](#tosa-generic-constraints) |
-| AVERAGE_POOL_2D | [Generic](#tosa-generic-constraints) |
-| CONCATENATION | [Generic](#tosa-generic-constraints) |
-| CONV_2D | [Generic](#tosa-generic-constraints) |
-| DEPTHWISE_CONV_2D | [Generic](#tosa-generic-constraints) |
-| FULLY_CONNECTED | [Generic](#tosa-generic-constraints) |
-| HARD_SWISH | [Generic](#tosa-generic-constraints) |
-| LEAKY_RELU | [Generic](#tosa-generic-constraints) |
-| LOGISTIC | [Generic](#tosa-generic-constraints) |
-| MAXIMUM | [Generic](#tosa-generic-constraints) |
-| MAX_POOL_2D | [Generic](#tosa-generic-constraints) |
-| MEAN | [Generic](#tosa-generic-constraints) |
-| MINIMUM | [Generic](#tosa-generic-constraints) |
-| MUL | [Generic](#tosa-generic-constraints) |
-| PACK | [Generic](#tosa-generic-constraints) |
-| PAD | [Generic](#tosa-generic-constraints) |
-| QUANTIZE | [Generic](#tosa-generic-constraints) |
-| RELU | [Generic](#tosa-generic-constraints) |
-| RELU6 | [Generic](#tosa-generic-constraints) |
-| RELU_N1_TO_1 | [Generic](#tosa-generic-constraints) |
-| RESHAPE | [Generic](#tosa-generic-constraints) |
-| RESIZE_BILINEAR | [Generic](#tosa-generic-constraints) |
-| SLICE | [Generic](#tosa-generic-constraints) |
-| SOFTMAX | [Generic](#tosa-generic-constraints) |
-| SPLIT | [Generic](#tosa-generic-constraints) |
-| SPLIT_V | [Generic](#tosa-generic-constraints) |
-| SQUEEZE | [Generic](#tosa-generic-constraints) |
-| STRIDED_SLICE | [Generic](#tosa-generic-constraints) |
-| SUB | [Generic](#tosa-generic-constraints) |
-| TANH | [Generic](#tosa-generic-constraints) |
-| TRANSPOSE_CONV | [Generic](#tosa-generic-constraints) |
-| UNPACK | [Generic](#tosa-generic-constraints) |
-
-### TOSA Generic Constraints
-
-This is a list of constraints that all NPU operators must satisfy in order to be scheduled on the NPU.
-
-- Tensors must be of type: int16, int32, int8, uint8
diff --git a/ethosu/vela/graph_optimiser.py b/ethosu/vela/graph_optimiser.py
index 87e3bc8..0f5636e 100644
--- a/ethosu/vela/graph_optimiser.py
+++ b/ethosu/vela/graph_optimiser.py
@@ -17,7 +17,7 @@
 # Early optimisation of the network graph, using the rewrite_graph module to do the traversal of the graph.
 from . import rewrite_graph
 from .graph_optimiser_util import check_format_restrictions
-from .graph_optimiser_util import check_reshapes
+from .graph_optimiser_util import check_memory_only_removed
 from .graph_optimiser_util import record_optimised
 from .nn_graph import NetworkType
 from .tflite_graph_optimiser import tflite_optimise_graph
@@ -38,7 +38,7 @@
     # Post-optimisation operator debug tracing, and checking that no undesired reshapes are left in the graph
     for sg in nng.subgraphs:
         rewrite_graph.visit_graph_post_order(
-            sg.output_tensors, arch, [check_format_restrictions], [check_reshapes, record_optimised]
+            sg.output_tensors, arch, [check_format_restrictions], [check_memory_only_removed, record_optimised]
         )
 
     if verbose_graph:
diff --git a/ethosu/vela/graph_optimiser_util.py b/ethosu/vela/graph_optimiser_util.py
index 8095f08..dafd284 100644
--- a/ethosu/vela/graph_optimiser_util.py
+++ b/ethosu/vela/graph_optimiser_util.py
@@ -26,11 +26,12 @@
 from .operation import Op
 from .operation_util import create_avgpool_nop
 from .shape4d import Shape4D
-from .tensor import check_quantized_tens_scaling_equal
 
 memory_only_ops = (
     Op.Reshape,
+    Op.QuantizedReshape,
     Op.Squeeze,
+    Op.ExpandDims,
 )
 
 
@@ -177,10 +178,11 @@
     return op
 
 
-def bypass_reshape_and_squeeze_ops(op):
-    assert op.type in (Op.Reshape, Op.Squeeze)
+def bypass_memory_only_ops(op):
+    assert op.type in memory_only_ops
     ofm = op.ofm
     ifm = op.ifm
+
     # Check if ifm/ofm are network ifm/ofm
     ifm_is_sg_ifm = ifm.ops[0].type in (Op.Placeholder, Op.SubgraphInput, Op.Const)
     ifm_is_sg_ofm = any(ifm_cons is None for ifm_cons in ifm.consumer_list)
@@ -235,13 +237,10 @@
     op.ifm.consumer_list.remove(op)
 
 
-def check_reshapes(op, arch):
-    if op.run_on_npu and op.type == Op.Reshape:
-        ofm = op.ofm
-
-        if check_quantized_tens_scaling_equal(op.ifm, ofm):
-            # Reshape should have been removed
-            raise VelaError(f"Reshape op {op} expected to have been removed, still remains")
+def check_memory_only_removed(op, arch):
+    if op.run_on_npu and op.type in memory_only_ops:
+        # Memory only operators should have been removed
+        raise VelaError(f"Memory only {op.type} op {op} expected to have been removed, still remains")
 
 
 def record_optimised(op, arch):
@@ -271,10 +270,10 @@
 
 
 def fix_sg_input_output(op, arch, nng):
-    if not op.run_on_npu or op.type not in (Op.Reshape, Op.Squeeze):
+    if not op.run_on_npu or op.type not in memory_only_ops:
         return op
 
-    # For the Reshape/Squeeze operators we want to remove, tensors are removed.
+    # For the memory only operators we want to remove, tensors are removed.
     # But in order to to do this, they cannot be outputs of the sg,
     # this need to be fixed prior to the removal.
     # Solution is to add a avgpool NOP, to maintain the original tensor.
@@ -290,7 +289,7 @@
     ofm_is_cpu_consumed = any(ofm_cons is not None and not ofm_cons.run_on_npu for ofm_cons in op.ofm.consumer_list)
 
     if (ifm_is_sg_ofm or ifm_is_sg_ifm or ifm_is_cpu_produced) and (ofm_is_sg_ofm or ofm_is_cpu_consumed):
-        # Both ifm and ofm need to persist, but only ifm need a copy, in order to remove the Reshape/Squeeze
+        # Both ifm and ofm need to persist, but only ifm need a copy, in order to remove the memory only operator.
         insert_copy_op_after_tens(op.ifm)
 
     return op
diff --git a/ethosu/vela/mark_tensors.py b/ethosu/vela/mark_tensors.py
index f3d5e85..f76c59d 100644
--- a/ethosu/vela/mark_tensors.py
+++ b/ethosu/vela/mark_tensors.py
@@ -15,6 +15,7 @@
 # limitations under the License.
 # Description:
 # Mark purpose and select formats for Tensors.
+from .graph_optimiser_util import memory_only_ops
 from .operation import CustomType
 from .operation import Op
 from .rewrite_graph import visit_graph_post_order
@@ -72,8 +73,8 @@
         else:
             purpose = TensorPurpose.FeatureMap
         mark_purpose(tens, arch, purpose)
-    if op.type == Op.Reshape:
-        # Reshape's input and output point to same data
+    if op.type in memory_only_ops:
+        # Memory only operator input and output point to same data
         op.ofm.mem_area = op.ifm.mem_area
 
     if op.type == Op.Custom and op.attrs.get("custom_type") == CustomType.ExistingNpuOp:
diff --git a/ethosu/vela/test/test_graph_optimiser.py b/ethosu/vela/test/test_graph_optimiser.py
index 2f96572..b8655c9 100644
--- a/ethosu/vela/test/test_graph_optimiser.py
+++ b/ethosu/vela/test/test_graph_optimiser.py
@@ -21,7 +21,6 @@
 
 from ethosu.vela.data_type import DataType
 from ethosu.vela.graph_optimiser import optimise_graph
-from ethosu.vela.nn_graph import Graph
 from ethosu.vela.nn_graph import NetworkType
 from ethosu.vela.operation import Op
 from ethosu.vela.operation import Padding
@@ -323,27 +322,23 @@
         assert pool_op.attrs["padding"] == Padding.VALID
 
 
-# Setup network to test removal of op with op_type Op.Reshape or Op.Squeeze
-# op_type should be Op.Reshape or Op.Squeeze
-def setup_network(op_type):
-    assert op_type == Op.Reshape or op_type == Op.Squeeze
-    if op_type == Op.Reshape:
-        op_str = "reshape"
-    elif op_type == Op.Squeeze:
-        op_str = "squeeze"
+def test_remove_reshape():
+    """
+    Test that the expected reshape are removed in graph_optimisation
+    """
 
+    # Create tensors and operators Test1
     quant = testutil.default_quant_params()
+
     # create reshape1 op
     ifm_shape = [64, 16]
     reshape1_ofm_shape = [1, 4, 16, 16]
-    reshape1_ifm = create_const_tensor(f"{op_str}1_in", ifm_shape, DataType.uint8, np.zeros(ifm_shape))
+    reshape1_ifm = create_const_tensor("reshape1_in", ifm_shape, DataType.uint8, np.zeros(ifm_shape))
     reshape1_ifm.quantization = quant
-    reshape1_ofm = create_const_tensor(
-        f"{op_str}1_out", reshape1_ofm_shape, DataType.uint8, np.zeros(reshape1_ofm_shape)
-    )
+    reshape1_ofm = create_const_tensor("reshape1_out", reshape1_ofm_shape, DataType.uint8, np.zeros(reshape1_ofm_shape))
     reshape1_ofm.quantization = quant
-    shape_tens = create_const_tensor(f"{op_str}1_shape", [1], DataType.int32, reshape1_ofm_shape)
-    reshape1_op = testutil.create_op(op_type, [reshape1_ifm, shape_tens], reshape1_ofm, set_ifm_ofm_shapes=False)
+    shape_tens = create_const_tensor("reshape1_shape", [1], DataType.int32, reshape1_ofm_shape)
+    reshape1_op = testutil.create_op(Op.Reshape, [reshape1_ifm, shape_tens], reshape1_ofm, set_ifm_ofm_shapes=False)
     reshape1_op.attrs["new_shape"] = reshape1_ofm_shape
     reshape1_op.run_on_npu = True
 
@@ -365,43 +360,42 @@
 
     # create reshape2 op
     ofm_shape = [8, 8, 16]
-    reshape2_ofm = create_const_tensor(f"{op_str}2_out", ofm_shape, DataType.uint8, np.zeros(ofm_shape))
+    reshape2_ofm = create_const_tensor("reshape2_out", ofm_shape, DataType.uint8, np.zeros(ofm_shape))
     reshape2_ofm.quantization = quant
-    shape_tens = create_const_tensor(f"{op_str}2_shape", [1], DataType.int32, ofm_shape)
-    reshape2_op = testutil.create_op(op_type, [conv_ofm, shape_tens], reshape2_ofm, set_ifm_ofm_shapes=False)
+    shape_tens = create_const_tensor("reshape2_shape", [1], DataType.int32, ofm_shape)
+    reshape2_op = testutil.create_op(Op.Reshape, [conv_ofm, shape_tens], reshape2_ofm, set_ifm_ofm_shapes=False)
     reshape2_op.attrs["new_shape"] = ofm_shape
     reshape2_op.run_on_npu = True
-    nng = Graph()
-    sg = testutil.create_subgraph([reshape1_op, conv2d_op, reshape2_op])
-    nng.subgraphs.append(sg)
-
-    return nng, reshape1_op, conv2d_op, reshape2_op
-
-
-def test_remove_reshape():
-    """
-    Tests that the expected reshape are removed in graph_optimisation
-    """
 
     # Test1 no Reshape op is expected to remain in the NPU subgrapgh
     # but first one will be put on CPU
     # Network is Reshape-Conv-Reshape
     # Result is Conv
-    nng, reshape1_op, conv2d_op, reshape2_op = setup_network(Op.Reshape)
+    nng = testutil.create_graph([reshape1_op, conv2d_op, reshape2_op])
     arch = testutil.create_arch()
     assert verify_graph_health(nng)
-    nng = optimise_graph(nng, arch, NetworkType.TFLite)
+    nng = optimise_graph(nng, arch, NetworkType.TFLite, True)
     assert verify_graph_health(nng)
 
-    # Test2 reshape1 with different quantisation, this Reshape op is expected to remain
-    # Network is Reshape-Conv-Reshape
-    # expected is Reshape-Conv
-    nng, reshape1_op, conv2d_op, reshape2_op = setup_network(Op.Reshape)
-    quant_zp32 = testutil.default_quant_params()
-    quant_zp32.zero_point = 32
-    reshape1_op.ofm.quantization = quant_zp32
+    # Create tensors and operator Test2
+    # create reshape op
+    reshape_ifm = create_const_tensor("reshape_in", ifm_shape, DataType.uint8, np.zeros(ifm_shape))
+    reshape_ifm.quantization = quant
+    reshape_ofm = create_const_tensor("reshape1_out", reshape1_ofm_shape, DataType.uint8, np.zeros(reshape1_ofm_shape))
+    reshape_ofm.quantization = quant
+    shape_tens = create_const_tensor("reshape1_shape", [1], DataType.int32, reshape1_ofm_shape)
+    reshape_op = testutil.create_op(Op.Reshape, [reshape_ifm, shape_tens], reshape_ofm, set_ifm_ofm_shapes=False)
+    reshape_op.attrs["new_shape"] = reshape1_ofm_shape
+    reshape_op.run_on_npu = True
+
+    # Test2 Reshape ifm/ofm is sg input/output.
+    # Reshape op is expected to be replaced by a AvgPool 'NOP'.
+    #
+    # Network is Reshape
+    # expected is AvgPool
+    nng = testutil.create_graph([reshape_op])
     assert verify_graph_health(nng)
-    nng = optimise_graph(nng, arch, NetworkType.TFLite)
+    nng = optimise_graph(nng, arch, NetworkType.TFLite, True)
     assert verify_graph_health(nng)
 
 
@@ -410,23 +404,132 @@
     Tests that the expected squeeze are removed in graph_optimisation
     """
 
+    # Create tensors and operators Test1
+    quant = testutil.default_quant_params()
+
+    # create conv op
+    ifm_shape = [1, 1, 1, 1024]
+    conv_ifm = create_const_tensor("conv_in", ifm_shape, DataType.uint8, np.zeros(ifm_shape))
+    conv_ifm.quantization = quant
+    conv_ofm = Tensor([1, 1, 1, 1001], DataType.uint8, "output")
+    conv_ofm.quantization = quant.clone()
+    weight_tens = Tensor([1, 1, 1024, 1001], DataType.uint8, "weights")
+    weight_tens.values = np.zeros(weight_tens.shape, np.uint8)
+    weight_tens.quantization = quant.clone()
+    bias_tens = Tensor([1001], DataType.int32, "biases")
+
+    attrs = {"padding": Padding.SAME, "stride_w": 1, "stride_h": 1, "dilation_w_factor": 1, "dilation_h_factor": 1}
+    attrs["strides"] = (1, attrs["stride_h"], attrs["stride_w"], 1)
+
+    conv2d_op = testutil.create_op(
+        Op.Conv2D, [conv_ifm, weight_tens, bias_tens], conv_ofm, attrs=attrs, set_ifm_ofm_shapes=False
+    )
+    conv2d_op.run_on_npu = True
+
+    # create squeeze op
+    ofm_shape = [1, 1001]
+    squeeze_ofm = create_const_tensor("squeeze_out", ofm_shape, DataType.uint8, np.zeros(ofm_shape))
+    squeeze_ofm.quantization = quant.clone()
+    squeeze_op = testutil.create_op(Op.Squeeze, [conv_ofm], squeeze_ofm, set_ifm_ofm_shapes=False)
+    squeeze_op.attrs["squeeze_dims"] = [1, 2]
+    squeeze_op.run_on_npu = True
+
     # Test1 no Squeeze op is expected to remain in the NPU subgrapgh
-    # but first one will be put on CPU
-    # Network is Squeeze-Conv-Squeeze
+    #
+    # Network is Conv-Squeeze
     # Result is Conv
-    nng, squeeze1_op, conv2d_op, squeeze2_op = setup_network(Op.Squeeze)
+    nng = testutil.create_graph([conv2d_op, squeeze_op])
     arch = testutil.create_arch()
     assert verify_graph_health(nng)
-    nng = optimise_graph(nng, arch, NetworkType.TFLite)
+    nng = optimise_graph(nng, arch, NetworkType.TFLite, True)
     assert verify_graph_health(nng)
 
-    # Test2 squeeze1 with different quantisation, this Squeeze op is expected to remain
-    # Network is Squeeze-Conv-Squeeze
-    # expected is Squeeze-Conv
-    nng, squeeze1_op, conv2d_op, squeeze2_op = setup_network(Op.Squeeze)
-    quant_zp32 = testutil.default_quant_params()
-    quant_zp32.zero_point = 32
-    squeeze1_op.ofm.quantization = quant_zp32
+    # Create tensors and operator Test2
+    # create squeeze op
+    ifm_shape = [1, 1, 1, 1001]
+    squeeze_ifm = create_const_tensor("squeeze_in", ifm_shape, DataType.uint8, np.zeros(ifm_shape))
+    squeeze_ifm.quantization = quant
+    squeeze_ofm = create_const_tensor("squeeze_out", ofm_shape, DataType.uint8, np.zeros(ofm_shape))
+    squeeze_ofm.quantization = quant.clone()
+    squeeze_op = testutil.create_op(Op.Squeeze, [squeeze_ifm], squeeze_ofm, set_ifm_ofm_shapes=False)
+    squeeze_op.attrs["squeeze_dims"] = [1, 2]
+    squeeze_op.run_on_npu = True
+
+    # Test2 Squeeze ifm/ofm is sg input/output.
+    # Squeeze op is expected to be replaced by a AvgPool 'NOP'.
+    #
+    # Network is Squeeze
+    # expected is AvgPool
+    nng = testutil.create_graph([squeeze_op])
     assert verify_graph_health(nng)
-    nng = optimise_graph(nng, arch, NetworkType.TFLite)
+    nng = optimise_graph(nng, arch, NetworkType.TFLite, True)
+    assert verify_graph_health(nng)
+
+
+def test_remove_expand_dims():
+    """
+    Tests that the expected ExpandDims are removed in graph_optimisation
+    """
+
+    # Create tensors and operators Test1
+    quant = testutil.default_quant_params()
+
+    # create ExpandDims op
+    ifm_shape = [4, 16, 16]
+    ofm_shape = [1, 4, 16, 16]
+    expand_dims_ifm = create_const_tensor("expand_dims_in", ifm_shape, DataType.uint8, np.zeros(ifm_shape))
+    expand_dims_ifm.quantization = quant
+    expand_dims_ofm = create_const_tensor("expand_dims_out", ofm_shape, DataType.uint8, np.zeros(ofm_shape))
+    expand_dims_ofm.quantization = quant.clone()
+    dim_tens = create_const_tensor("dim_tens", [], DataType.uint8, 1)
+    expand_dims_op = testutil.create_op(
+        Op.ExpandDims, [expand_dims_ifm, dim_tens], expand_dims_ofm, set_ifm_ofm_shapes=False
+    )
+    expand_dims_op.run_on_npu = True
+
+    # create conv op
+    conv_ofm = Tensor([1, 8, 8, 16], DataType.uint8, "output")
+    conv_ofm.quantization = quant.clone()
+    weight_tens = Tensor([1, 1, 16, 16], DataType.uint8, "weights")
+    weight_tens.values = np.zeros(weight_tens.shape, np.uint8)
+    weight_tens.quantization = quant.clone()
+    bias_tens = Tensor([16], DataType.int32, "biases")
+
+    attrs = {"padding": Padding.SAME, "stride_w": 1, "stride_h": 1, "dilation_w_factor": 1, "dilation_h_factor": 1}
+    attrs["strides"] = (1, attrs["stride_h"], attrs["stride_w"], 1)
+
+    conv2d_op = testutil.create_op(
+        Op.Conv2D, [expand_dims_ofm, weight_tens, bias_tens], conv_ofm, attrs=attrs, set_ifm_ofm_shapes=False
+    )
+    conv2d_op.run_on_npu = True
+
+    # Test1 no ExpandDims op is expected to remain in the NPU subgrapgh
+    #
+    # Network is ExpandDims-Conv
+    # Result is Conv
+    nng = testutil.create_graph([expand_dims_op, conv2d_op])
+    arch = testutil.create_arch()
+    assert verify_graph_health(nng)
+    nng = optimise_graph(nng, arch, NetworkType.TFLite, True)
+    assert verify_graph_health(nng)
+
+    # create ExpandDims op
+    expand_dims_ifm = create_const_tensor("expand_dims_in", ifm_shape, DataType.uint8, np.zeros(ifm_shape))
+    expand_dims_ifm.quantization = quant
+    expand_dims_ofm = create_const_tensor("expand_dims_out", ofm_shape, DataType.uint8, np.zeros(ofm_shape))
+    expand_dims_ofm.quantization = quant.clone()
+    dim_tens = create_const_tensor("dim_tens", [], DataType.uint8, 1)
+    expand_dims_op = testutil.create_op(
+        Op.ExpandDims, [expand_dims_ifm, dim_tens], expand_dims_ofm, set_ifm_ofm_shapes=False
+    )
+    expand_dims_op.run_on_npu = True
+
+    # Test2 ExpandDims ifm/ofm is sg input/output.
+    # ExpandDims op is expected to be replaced by a AvgPool 'NOP'.
+    #
+    # Network is ExpandDims
+    # expected is AvgPool
+    nng = testutil.create_graph([expand_dims_op])
+    assert verify_graph_health(nng)
+    nng = optimise_graph(nng, arch, NetworkType.TFLite, True)
     assert verify_graph_health(nng)
diff --git a/ethosu/vela/test/test_tflite_model_semantic.py b/ethosu/vela/test/test_tflite_model_semantic.py
index 4c32984..84f9916 100644
--- a/ethosu/vela/test/test_tflite_model_semantic.py
+++ b/ethosu/vela/test/test_tflite_model_semantic.py
@@ -458,3 +458,57 @@
     assert semantic_checker.is_operator_semantic_valid(op)
     op = create_mean([1, 6, 6, 16], [1, 1, 1, 16], [2, 1], DataType.int8, {"keep_dims": True})
     assert semantic_checker.is_operator_semantic_valid(op)
+
+
+def test_matching_in_out_quant():
+    # quantisation parameters of ifm and ofm should match.
+    quant = testutil.default_quant_params()
+    # create reshape op
+    ifm_shape = [64, 16]
+    ofm_shape = [1, 4, 16, 16]
+    ifm = create_const_tensor("reshape_in", ifm_shape, DataType.uint8, np.zeros(ifm_shape))
+    ifm.quantization = quant
+    ofm = create_const_tensor("reshape_out", ofm_shape, DataType.uint8, np.zeros(ofm_shape))
+    ofm.quantization = quant.clone()
+    shape_tens = create_const_tensor("shape", [1], DataType.int32, ofm_shape)
+    op = testutil.create_op(Op.Reshape, [ifm, shape_tens], ofm, set_ifm_ofm_shapes=False)
+    op.attrs["new_shape"] = ofm_shape
+
+    # Matching quantisation parameters
+    assert semantic_checker.is_operator_semantic_valid(op)
+
+    # Different zp
+    ofm.quantization.zero_point = 32
+    assert not semantic_checker.is_operator_semantic_valid(op)
+
+    # Different scale
+    ofm.quantization.zero_point = 0
+    ofm.quantization.scale_f32 = 0.9
+    assert not semantic_checker.is_operator_semantic_valid(op)
+
+    # Squeeze op diff quant
+    # create squeeze op
+    ifm_shape = [1, 1, 1, 1001]
+    ofm_shape = [1, 1001]
+    ifm = create_const_tensor("squeeze_in", ifm_shape, DataType.uint8, np.zeros(ifm_shape))
+    ifm.quantization = quant
+    ofm = create_const_tensor("squeeze_out", ofm_shape, DataType.uint8, np.zeros(ofm_shape))
+    ofm.quantization = quant.clone()
+    ofm.quantization.zero_point = 32
+    op = testutil.create_op(Op.Squeeze, [ifm], ofm, set_ifm_ofm_shapes=False)
+    op.attrs["squeeze_dims"] = [1, 2]
+    assert not semantic_checker.is_operator_semantic_valid(op)
+
+    # ExpandDims diff quant
+    quant = testutil.default_quant_params()
+    # create expand_dims op
+    ifm_shape = [4, 16, 16]
+    ofm_shape = [1, 4, 16, 16]
+    ifm = create_const_tensor("expand_dims_in", ifm_shape, DataType.uint8, np.zeros(ifm_shape))
+    ifm.quantization = quant
+    ofm = create_const_tensor("expand_dims_out", ofm_shape, DataType.uint8, np.zeros(ofm_shape))
+    ofm.quantization = quant.clone()
+    ofm.quantization.zero_point = 32
+    dim = create_const_tensor("expand_dims_dim", [], DataType.uint8, 0)
+    op = testutil.create_op(Op.ExpandDims, [ifm, dim], ofm, set_ifm_ofm_shapes=False)
+    assert not semantic_checker.is_operator_semantic_valid(op)
diff --git a/ethosu/vela/tflite_graph_optimiser.py b/ethosu/vela/tflite_graph_optimiser.py
index 15b82c7..b48cc7a 100644
--- a/ethosu/vela/tflite_graph_optimiser.py
+++ b/ethosu/vela/tflite_graph_optimiser.py
@@ -30,10 +30,11 @@
 from .debug_database import DebugDatabase
 from .errors import UnsupportedFeatureError
 from .ethos_u55_regs.ethos_u55_regs import resampling_mode
-from .graph_optimiser_util import bypass_reshape_and_squeeze_ops
+from .graph_optimiser_util import bypass_memory_only_ops
 from .graph_optimiser_util import calc_explicit_padding
 from .graph_optimiser_util import convert_depthwise_to_conv
 from .graph_optimiser_util import fix_sg_input_output
+from .graph_optimiser_util import memory_only_ops
 from .graph_optimiser_util import move_splitsliceread_to_consumer
 from .graph_optimiser_util import needed_total_padding
 from .graph_optimiser_util import set_ifm_ofm_op_shapes
@@ -190,7 +191,7 @@
             len(op.ofm.consumer_list) == 1
             and op.ofm.consumer_list[0] is not None
             and op.ofm.consumer_list[0].run_on_npu
-            and op.ofm.consumer_list[0].type not in (Op.Reshape, Op.Squeeze)
+            and op.ofm.consumer_list[0].type not in memory_only_ops
             and op.ofm_shapes[0] == Shape4D.from_list(op.ofm.shape)
         ):
             # SplitSliceRead can be performed by tensor consumer
@@ -211,27 +212,6 @@
             DebugDatabase.add_optimised(op, avgpool_op)
 
 
-def insert_copy_op_after_tens(tens):
-    tens_cons_list_copy = tens.consumer_list.copy()
-
-    # Create a avg_pool nop op with ifm as input
-    copy_tens = tens.clone()
-    copy_op = create_avgpool_nop(tens.name + "_avgpool")
-    copy_op.add_input_tensor(tens)
-    copy_op.set_output_tensor(copy_tens)
-    copy_op.set_ifm_ofm_shapes()
-    copy_op.run_on_npu = True
-
-    # Set copy_ifm consumers
-    for tens_cons in tens_cons_list_copy:
-        if tens_cons is not None:
-            for ifm_idx, cons_inp in enumerate(tens_cons.inputs):
-                if cons_inp == tens:
-                    tens_cons.set_input_tensor(copy_tens, ifm_idx)
-
-    DebugDatabase.add_optimised(tens.ops[0], copy_op)
-
-
 def calc_padding_and_skirt(padding_type, kernel, input_shape, explicit_padding):
     k_w, k_h = kernel.dilated_wh()
     s_x, s_y = kernel.stride
@@ -985,19 +965,9 @@
     return op
 
 
-def remove_reshape_and_squeeze_ops(op, arch):
-    if op.run_on_npu and op.type in (Op.Reshape, Op.Squeeze):
-        ofm = op.ofm
-        ifm = op.ifm
-
-        # Check if quantization is the same in the input and output for the reshape ops
-        if not check_quantized_tens_scaling_equal(ifm, ofm):
-            # TODO Both tensors are needed, since quantisation properties currently are linked to Tensors.
-            # In order to remove this reshape either quantization properties need to be moved to Operator,
-            # or the reshape need to be replace with a NOP.
-            return
-
-        bypass_reshape_and_squeeze_ops(op)
+def remove_memory_only_ops(op, arch):
+    if op.run_on_npu and op.type in memory_only_ops:
+        bypass_memory_only_ops(op)
 
 
 def fuse_activation_function_with_prev(op, arch, nng):
@@ -1463,9 +1433,9 @@
             nng, sg, arch, [], [fix_sg_input_output], rewrite_unsupported=False,
         )
 
-    # Removal of reshapes and squeeze
+    # Removal of memory only operators
     for sg in nng.subgraphs:
-        rewrite_graph.visit_graph_post_order(sg.output_tensors, arch, [], [remove_reshape_and_squeeze_ops])
+        rewrite_graph.visit_graph_post_order(sg.output_tensors, arch, [], [remove_memory_only_ops])
         sg.refresh_after_modification()
 
     # Rewrite of operators
diff --git a/ethosu/vela/tflite_model_semantic.py b/ethosu/vela/tflite_model_semantic.py
index c8b373a..6e2467b 100644
--- a/ethosu/vela/tflite_model_semantic.py
+++ b/ethosu/vela/tflite_model_semantic.py
@@ -26,6 +26,7 @@
 from .operation import Op
 from .supported_operators_util import docstring_format_args
 from .supported_operators_util import list_formatter
+from .tensor import check_quantized_tens_scaling_equal
 from .tflite_mapping import BUILTIN_OPERATOR_UNKNOWN
 from .tflite_mapping import optype_to_builtintype
 
@@ -53,7 +54,8 @@
     binary_elem_wise_add_mul_sub = set((Op.Add, Op.Mul, Op.Sub,))
     binary_elem_wise_main_ops = binary_elem_wise_min_max_ops | binary_elem_wise_add_mul_sub | binary_elem_wise_shift_ops
     elem_wise_main_ops = binary_elem_wise_main_ops | unary_elem_wise_main_ops
-    shapeless_input_ops = binary_elem_wise_main_ops | set((Op.Split, Op.SplitV, Op.Mean))
+    shapeless_input_ops = binary_elem_wise_main_ops | set((Op.Split, Op.SplitV, Op.Mean, Op.ExpandDims))
+    reshape_ops = set((Op.Reshape, Op.QuantizedReshape, Op.Squeeze, Op.ExpandDims,))
 
     def __init__(self):
         # Setup the generic constraints. Note: the order matters
@@ -110,6 +112,10 @@
             self.specific_constraints[op_type].append(TFLiteSemantic.constraint_matching_signed)
             self.specific_constraints[op_type].append(TFLiteSemantic.constraint_unsigned_valid)
 
+        # Ops reshaping dimensions: Reshape, Squeeze and ExpandDims
+        for op_type in TFLiteSemantic.reshape_ops:
+            self.specific_constraints[op_type].append(TFLiteSemantic.constraint_matching_in_out_quant)
+
         # Softmax specific checks:
         self.specific_constraints[Op.Softmax].append(TFLiteSemantic.constraint_matching_shapes)
         self.specific_constraints[Op.Softmax].append(TFLiteSemantic.constraint_matching_in_out_types)
@@ -518,6 +524,13 @@
             valid = axis in (1, 2, [1], [2], [1, 2], [2, 1])
         return valid, f"Axis is {axis}"
 
+    @staticmethod
+    def constraint_matching_in_out_quant(op):
+        "Input and output quantisation must match."
+        if not check_quantized_tens_scaling_equal(op.ifm, op.ofm):
+            return False, "IFM and OFM quantisation parameters are not equal."
+        return True, "IFM and OFM quantisation parameters matches."
+
 
 def tflite_semantic_checker(nng):
     semantic_checker = TFLiteSemantic()
diff --git a/ethosu/vela/tflite_supported_operators.py b/ethosu/vela/tflite_supported_operators.py
index 016d44e..933302f 100644
--- a/ethosu/vela/tflite_supported_operators.py
+++ b/ethosu/vela/tflite_supported_operators.py
@@ -86,7 +86,7 @@
     )
     split_ops = set((Op.Split, Op.SplitV, Op.StridedSlice, Op.Slice, Op.UnpackReshaped, Op.Unpack,))
     concat_ops = set((Op.Concat, Op.ConcatTFLite, Op.PackReshaped, Op.Pack,))
-    memory_only_ops = set((Op.Reshape, Op.QuantizedReshape, Op.Squeeze,)) | concat_ops | split_ops
+    memory_only_ops = set((Op.Reshape, Op.QuantizedReshape, Op.Squeeze, Op.ExpandDims,)) | concat_ops | split_ops
     per_axis_quant_ops = convolution_like_ops  # per-axis/channel quantization only currently supported for conv ops
     supported_fused_activations = relu_ops | set((Op.Tanh, Op.Sigmoid, Op.LUT,))
     supported_operators = npu_pre_ops | mac_main_ops | elem_wise_main_ops | pad_ops | npu_post_ops | memory_only_ops
diff --git a/ethosu/vela/tosa_graph_optimiser.py b/ethosu/vela/tosa_graph_optimiser.py
index bade4a9..a298ddb 100644
--- a/ethosu/vela/tosa_graph_optimiser.py
+++ b/ethosu/vela/tosa_graph_optimiser.py
@@ -21,7 +21,7 @@
 from .api import NpuRoundingMode
 from .data_type import DataType
 from .debug_database import DebugDatabase
-from .graph_optimiser_util import bypass_reshape_and_squeeze_ops
+from .graph_optimiser_util import bypass_memory_only_ops
 from .graph_optimiser_util import calc_explicit_padding
 from .graph_optimiser_util import convert_depthwise_to_conv
 from .graph_optimiser_util import move_splitsliceread_to_consumer
@@ -294,7 +294,7 @@
 
 def remove_reshapes(op, arch):
     if op.run_on_npu and op.type == Op.Reshape:
-        bypass_reshape_and_squeeze_ops(op)
+        bypass_memory_only_ops(op)
 
 
 def rewrite_activation(op, arch, nng):
diff --git a/ethosu/vela/vela.py b/ethosu/vela/vela.py
index 9448749..8a80827 100644
--- a/ethosu/vela/vela.py
+++ b/ethosu/vela/vela.py
@@ -167,6 +167,10 @@
 
 
 def generate_supported_ops():
+    # Exclude network type from generation by adding value to exclude list.
+    # To easily exclude NetworkType from generated documentation.
+    exclude_generation_network_type_value = [NetworkType.TOSA.value]
+
     lines = [
         "# Supported Ops",
         "",
@@ -180,11 +184,17 @@
     ]
 
     for network_type in NetworkType:
+        if network_type.value in exclude_generation_network_type_value:
+            continue
+
         lines += [
             f"- [{network_type.name}](#{network_type.name.lower()}-summary-table)",
         ]
 
     for network_type in NetworkType:
+        if network_type.value in exclude_generation_network_type_value:
+            continue
+
         lines += [
             "",
             f"## {network_type.name} Summary Table",