# Copyright (C) 2020-2021 Arm Limited or its affiliates. All rights reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
# Licensed under the Apache License, Version 2.0 (the License); you may
# not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an AS IS BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Description:
# Register level (low-level) command stream generation for Ethos-U. Takes a list of NPU operations and generates
# all the register settings. Calculates dependencies between commands and inserts wait operations. And generates a bit
# stream suitable for interpretation by the Ethos-U processor.
from collections import defaultdict
from enum import Enum
from enum import IntEnum
from typing import Dict
from typing import List
from typing import Optional

import numpy as np

from . import scaling
from .api import NpuAccelerator
from .api import NpuActivation
from .api import NpuActivationOp
from .api import NpuAddressRange
from .api import NpuBlockOperation
from .api import NpuBlockTraversal
from .api import NpuConv2DOperation
from .api import NpuConvDepthWiseOperation
from .api import NpuDataType
from .api import NpuDmaOperation
from .api import NpuElementWiseOp
from .api import NpuElementWiseOperation
from .api import NpuFeatureMap
from .api import NpuKernel
from .api import NpuLayout
from .api import NpuOperation
from .api import NpuOperationType
from .api import NpuPadding
from .api import NpuPoolingOp
from .api import NpuPoolingOperation
from .api import NpuQuantization
from .api import NpuResamplingMode
from .api import NpuRoundingMode
from .api import NpuShape3D
from .api import NpuTileBox
from .architecture_features import Accelerator
from .architecture_features import ArchitectureFeatures
from .architecture_features import Block
from .architecture_features import create_default_arch
from .architecture_features import SharedBufferArea
from .architecture_features import SHRAMElements
from .errors import VelaError
from .ethos_u55_regs.ethos_u55_regs import acc_format
from .ethos_u55_regs.ethos_u55_regs import activation
from .ethos_u55_regs.ethos_u55_regs import cmd0
from .ethos_u55_regs.ethos_u55_regs import cmd1
from .ethos_u55_regs.ethos_u55_regs import elementwise_mode
from .ethos_u55_regs.ethos_u55_regs import pooling_mode
from .ethos_u55_regs.ethos_u55_regs import resampling_mode
from .ethos_u55_regs.ethos_u55_regs import rounding
from .numeric_util import quantise_float32
from .numeric_util import round_away_zero
from .numeric_util import round_up_to_int
from .operation import NpuBlockType
from .range_set import MemoryAccessSet
from .register_command_stream_util import calc_blockdep
from .register_command_stream_util import get_dma_memory_accesses
from .register_command_stream_util import get_op_memory_accesses
from .register_command_stream_util import get_strides
from .register_command_stream_util import get_wait_dependency
from .register_command_stream_util import has_ifm2
from .register_command_stream_util import to_kernel
from .register_command_stream_util import UNARY_ELEMWISE_OPS
from .register_command_stream_util import Watermark
from .shared_buffer_allocation import find_suitable_block_configs
from .shared_buffer_allocation import shared_buffer_allocation_for_npu_op
from .shared_buffer_allocation import SharedBufferAllocation


class RegisterMachine:
    def __init__(self):
        self.n_banks = 1
        self.registers = [defaultdict(lambda: None) for _ in range(self.n_banks)]
        self.bank_idx = 0

    def set_register(self, reg, value):
        is_changed = self.registers[self.bank_idx][reg] != value
        self.registers[self.bank_idx][reg] = value
        # is_changed = True # force command
        return is_changed

    def switch_bank(self):
        self.bank_idx = (self.bank_idx + 1) % self.n_banks


class CmdMode(IntEnum):
    NoPayload = 0x0000
    Payload32 = 0x4000
    Mask = 0xC000
    CmdOpMask = 0x03FF


class CommandStreamEmitter:
    WORD_SIZE = 4

    def __init__(self):
        self.cmd_stream = []
        self.reg_machine = [RegisterMachine(), RegisterMachine()]
        self.last_absolute_wait = defaultdict(int)
        self.offset = 0

    def get_reg_machine(self, cmd):
        if "DMA" in cmd.name:
            return self.reg_machine[1]
        else:
            return self.reg_machine[0]

    def size_in_bytes(self):
        sz = 0
        for cmd in self.cmd_stream:
            sz += len(cmd) * CommandStreamEmitter.WORD_SIZE
        return sz

    def to_list(self) -> List[int]:
        return [elem for cmd in self.cmd_stream for elem in cmd]

    def print_cmds(self):
        print("Code:    Command:                       Param: Payload:")
        for words_for_one_command in self.cmd_stream:
            code = words_for_one_command[0] & 0x0000FFFF  # lower 16 bits
            param = words_for_one_command[0] >> 16  # higher 16 bits

            payload_mode = CmdMode(code & CmdMode.Mask)

            # code and command
            s = "  0x%04x " % code
            if payload_mode == CmdMode.NoPayload:
                s += str(cmd0(code & CmdMode.CmdOpMask))
            else:
                s += str(cmd1(code & CmdMode.CmdOpMask))

            s = s.ljust(40)
            s += "%5d" % param

            # payload
            if payload_mode == CmdMode.Payload32:
                s += "   0x%08x (%d)" % (words_for_one_command[1], words_for_one_command[1])
            else:
                s += "   -"

            print(s)

    def cmd0_with_param(self, cmd: cmd0, param):
        if isinstance(param, Enum):
            param = int(param.value)
        else:
            param = int(param)
        param = param & 0xFFFF
        command = cmd.value | (param << 16)
        if not self.get_reg_machine(cmd).set_register(cmd, (command, param)):
            return

        # This is not a redundant command, actually write it
        self.cmd_stream.append((command,))
        self.offset += CommandStreamEmitter.WORD_SIZE

    def cmd1_with_offset(self, cmd: cmd1, offset, param=0x0):
        offset = int(offset) & 0xFFFFFFFFF
        command = cmd.value | CmdMode.Payload32.value | (param << 16)

        if not self.get_reg_machine(cmd).set_register(cmd, (command, offset)):
            return

        # This is not a redundant command, actually write it
        self.cmd_stream.append((command, offset))
        self.offset += CommandStreamEmitter.WORD_SIZE * 2

    def cmd1_with_address(self, cmd: cmd1, offset):
        self.cmd1_with_offset(cmd, offset, offset >> 32)

    def cmd_wait(self, cmd: cmd0, channel: int, outstanding_count: int):
        param = (16 * channel) + outstanding_count
        command = ((param & 0xFFFF) << 16) | cmd.value
        self.cmd_stream.append((command,))
        self.offset += CommandStreamEmitter.WORD_SIZE

    def cmd_do_operation(self, cmd: cmd0, param=0):
        param = int(param)
        command = ((param & 0xFFFF) << 16) | cmd.value

        self.cmd_stream.append((command,))
        self.offset += CommandStreamEmitter.WORD_SIZE
        self.get_reg_machine(cmd).switch_bank()


# -------------------------------------------------------------------
# REGISTER GENERATION
# -------------------------------------------------------------------


# TODO: Replace with definitions from ethos_u55_regs
class IFM2Broadcast(IntEnum):
    BroadcastHdim = 1 << 0
    BroadcastWdim = 1 << 1
    BroadcastCdim = 1 << 2
    ReverseOperandOrder = 1 << 6
    UseIFM2Scalar = 1 << 7


pooling_op_map = {
    NpuPoolingOp.MAX: pooling_mode.MAX.value,
    NpuPoolingOp.AVERAGE: pooling_mode.AVERAGE.value,
    NpuPoolingOp.REDUCE_SUM: pooling_mode.REDUCE_SUM.value,
}

elementwise_op_map = {
    NpuElementWiseOp.MUL: elementwise_mode.MUL.value,
    NpuElementWiseOp.ADD: elementwise_mode.ADD.value,
    NpuElementWiseOp.SUB: elementwise_mode.SUB.value,
    NpuElementWiseOp.MIN: elementwise_mode.MIN.value,
    NpuElementWiseOp.MAX: elementwise_mode.MAX.value,
    NpuElementWiseOp.LRELU: elementwise_mode.LRELU.value,
    NpuElementWiseOp.ABS: elementwise_mode.ABS.value,
    NpuElementWiseOp.CLZ: elementwise_mode.CLZ.value,
    NpuElementWiseOp.SHR: elementwise_mode.SHR.value,
    NpuElementWiseOp.SHL: elementwise_mode.SHL.value,
}

activation_op_map = {
    NpuActivationOp.NONE_OR_RELU: activation.NONE,
    NpuActivationOp.TANH: activation.TANH,
    NpuActivationOp.SIGMOID: activation.SIGMOID,
}

# Maps an AccumulatorType enum to the corresponding acc_format value
acc_format_map = {
    SHRAMElements.Acc16: acc_format.FP_S5_10.value,
    SHRAMElements.Acc32: acc_format.INT_32BIT.value,
    SHRAMElements.Acc40: acc_format.INT_40BIT.value,
}

resampling_mode_map = {
    NpuResamplingMode.NONE: resampling_mode.NONE,
    NpuResamplingMode.NEAREST: resampling_mode.NEAREST,
    NpuResamplingMode.TRANSPOSE: resampling_mode.TRANSPOSE,
}

# Maps data type size in bits to activation precision
precision_map = {8: 0, 16: 1, 32: 2}

# Maps rounding mode to the corresponding value
rounding_mode_map = {
    NpuRoundingMode.TFL: rounding.TFL.value,
    NpuRoundingMode.TRUNCATE: rounding.TRUNCATE.value,
    NpuRoundingMode.NATURAL: rounding.NATURAL.value,
}


def quantise(value: float, quant: Optional[NpuQuantization]) -> int:
    """Quantizes the given value"""
    scale = 1 if quant is None or quant.scale_f32 is None else quant.scale_f32
    zp = 0 if quant is None else quant.zero_point
    return quantise_float32(value, scale, zp)


def generate_padding(emit: CommandStreamEmitter, padding: NpuPadding):
    """Generates IFM_PAD registers"""
    emit.cmd0_with_param(cmd0.NPU_SET_IFM_PAD_TOP, padding.top)
    emit.cmd0_with_param(cmd0.NPU_SET_IFM_PAD_LEFT, padding.left)
    emit.cmd0_with_param(cmd0.NPU_SET_IFM_PAD_BOTTOM, padding.bottom)
    emit.cmd0_with_param(cmd0.NPU_SET_IFM_PAD_RIGHT, padding.right)


def generate_activation(emit: CommandStreamEmitter, activation: Optional[NpuActivation], ofm: NpuFeatureMap):
    """Generates ACTIVATION registers"""
    act = activation if activation is not None else NpuActivation(NpuActivationOp.NONE_OR_RELU)

    if act.min is None:
        quantized_min = ofm.data_type.min_value()
    else:
        quantized_min = quantise(act.min, ofm.quantization)
    if act.max is None:
        quantized_max = ofm.data_type.max_value()
    else:
        quantized_max = quantise(act.max, ofm.quantization)
    quantized_min = max(quantized_min, np.iinfo(np.int16).min, ofm.data_type.min_value())
    quantized_max = min(quantized_max, np.iinfo(np.int16).max, ofm.data_type.max_value())
    if act.op_type == NpuActivationOp.TABLE_LOOKUP:
        assert 0 <= act.lookup_table_index < 8
        activation_value = 16 + act.lookup_table_index
        if ofm.data_type == NpuDataType.INT32:
            activation_value |= 3 << 12  # Force I8 range
            quantized_min = max(-128, quantized_min)
            quantized_max = min(127, quantized_max)
    else:
        activation_value = activation_op_map[act.op_type]
    emit.cmd0_with_param(cmd0.NPU_SET_ACTIVATION, activation_value)
    emit.cmd0_with_param(cmd0.NPU_SET_ACTIVATION_MIN, quantized_min)
    emit.cmd0_with_param(cmd0.NPU_SET_ACTIVATION_MAX, quantized_max)


def generate_addresses(emit: CommandStreamEmitter, ptr_cmds: List[cmd1], addresses: List[int], layout: NpuLayout):
    """Generates xFM_BASE registers"""
    if layout == NpuLayout.NHCWB16:
        # Check that all BasePointer addresses are aligned to 16 bytes
        assert all((int(addr) % 16) == 0 for addr in addresses)
    for i in range(4):
        emit.cmd1_with_address(ptr_cmds[i], addresses[i])


def generate_tiles(emit: CommandStreamEmitter, tile_cmds: List[cmd0], tiles: NpuTileBox):
    """Generates xFM_HEIGHT0/HEIGHT1/WIDTH0 registers"""
    emit.cmd0_with_param(tile_cmds[0], tiles.height_0 - 1)
    emit.cmd0_with_param(tile_cmds[1], tiles.height_1 - 1)
    emit.cmd0_with_param(tile_cmds[2], tiles.width_0 - 1)


def generate_strides(
    emit: CommandStreamEmitter, fm: NpuFeatureMap, stride_c_cmd: cmd1, stride_y_cmd: cmd1, stride_x_cmd: cmd1
):
    """Generates STRIDE_C/Y/X registers"""
    strides = get_strides(fm)
    emit.cmd1_with_address(stride_c_cmd, strides.depth)  # stride between 16-byte channel blocks (C)
    emit.cmd1_with_address(stride_y_cmd, strides.height)  # stride between vertical values (H)
    emit.cmd1_with_address(stride_x_cmd, strides.width)  # stride between horisontal values (W)


def generate_ifm_precision(emit: CommandStreamEmitter, fm: NpuFeatureMap, op_to_scale: int, precision_cmd: cmd0):
    """Generates IFM/IFM2_PRECISION register"""
    dtype = fm.data_type
    prec = 1 if dtype.is_signed() else 0
    activation_precision = precision_map[dtype.size_in_bits()]
    prec += activation_precision << 2

    if fm.layout == NpuLayout.NHCWB16:
        prec |= 1 << 6

    prec |= op_to_scale << 8
    emit.cmd0_with_param(precision_cmd, prec)


def generate_ofm_precision(emit: CommandStreamEmitter, npu_op: NpuBlockOperation, use_global_scale: bool):
    """Generates OFM_PRECISION register"""
    dtype = npu_op.ofm.data_type
    prec = 1 if dtype.is_signed() else 0
    activation_precision = precision_map[dtype.size_in_bits()]
    prec += activation_precision << 1

    if use_global_scale:
        # Set global scale bit, as opposed to using per channel scale
        prec |= 1 << 8
    if npu_op.ofm.layout == NpuLayout.NHCWB16:
        prec |= 1 << 6
    prec |= rounding_mode_map[npu_op.rounding_mode] << 14
    emit.cmd0_with_param(cmd0.NPU_SET_OFM_PRECISION, prec)


def generate_ifm2_broadcast(emit: CommandStreamEmitter, npu_op: NpuElementWiseOperation):
    """Generates IFM2_BROADCAST register for binary elementwise operations"""
    ifm2_broadcast = 0
    ifm = npu_op.ifm
    ifm2 = npu_op.ifm2
    if npu_op.reversed_operands:
        ifm2_broadcast |= IFM2Broadcast.ReverseOperandOrder
    if npu_op.ifm2_scalar is not None:
        # IFM2 is a constant, set UseIFM2Scalar bit to IFM2_BROADCAST
        ifm2_broadcast |= IFM2Broadcast.UseIFM2Scalar
    else:
        if ifm.shape.height != ifm2.shape.height:
            # Broadcast in 'H' dimension
            assert ifm2.shape.height == 1
            ifm2_broadcast |= IFM2Broadcast.BroadcastHdim

        if ifm.shape.width != ifm2.shape.width:
            # Broadcast in 'W' dimension
            assert ifm2.shape.width == 1
            ifm2_broadcast |= IFM2Broadcast.BroadcastWdim

        if ifm.shape.depth != ifm2.shape.depth:
            # Broadcast in 'C' dimension
            assert ifm2.shape.depth == 1
            ifm2_broadcast |= IFM2Broadcast.BroadcastCdim

    emit.cmd0_with_param(cmd0.NPU_SET_IFM2_BROADCAST, ifm2_broadcast)


def generate_ifm(emit: CommandStreamEmitter, ifm: NpuFeatureMap):
    """Generates general IFM registers"""
    emit.cmd0_with_param(cmd0.NPU_SET_IFM_REGION, ifm.region)
    generate_addresses(
        emit,
        [cmd1.NPU_SET_IFM_BASE0, cmd1.NPU_SET_IFM_BASE1, cmd1.NPU_SET_IFM_BASE2, cmd1.NPU_SET_IFM_BASE3],
        ifm.tiles.addresses,
        ifm.layout,
    )
    generate_tiles(
        emit, [cmd0.NPU_SET_IFM_HEIGHT0_M1, cmd0.NPU_SET_IFM_HEIGHT1_M1, cmd0.NPU_SET_IFM_WIDTH0_M1], ifm.tiles
    )
    emit.cmd0_with_param(cmd0.NPU_SET_IFM_DEPTH_M1, ifm.shape.depth - 1)
    generate_strides(emit, ifm, cmd1.NPU_SET_IFM_STRIDE_C, cmd1.NPU_SET_IFM_STRIDE_Y, cmd1.NPU_SET_IFM_STRIDE_X)
    emit.cmd0_with_param(cmd0.NPU_SET_IFM_ZERO_POINT, int(ifm.quantization.zero_point))


def generate_ifm2(emit: CommandStreamEmitter, ifm2: NpuFeatureMap, has_scalar: bool):
    """Generates general IFM2 registers"""
    if not has_scalar:
        emit.cmd0_with_param(cmd0.NPU_SET_IFM2_REGION, ifm2.region)
        generate_addresses(
            emit,
            [cmd1.NPU_SET_IFM2_BASE0, cmd1.NPU_SET_IFM2_BASE1, cmd1.NPU_SET_IFM2_BASE2, cmd1.NPU_SET_IFM2_BASE3],
            ifm2.tiles.addresses,
            ifm2.layout,
        )
        generate_tiles(
            emit, [cmd0.NPU_SET_IFM2_HEIGHT0_M1, cmd0.NPU_SET_IFM2_HEIGHT1_M1, cmd0.NPU_SET_IFM2_WIDTH0_M1], ifm2.tiles
        )
        generate_strides(emit, ifm2, cmd1.NPU_SET_IFM2_STRIDE_C, cmd1.NPU_SET_IFM2_STRIDE_Y, cmd1.NPU_SET_IFM2_STRIDE_X)
    emit.cmd0_with_param(cmd0.NPU_SET_IFM2_ZERO_POINT, int(ifm2.quantization.zero_point))


def generate_ofm(emit: CommandStreamEmitter, ofm: NpuFeatureMap):
    """Generates general OFM registers"""
    emit.cmd0_with_param(cmd0.NPU_SET_OFM_REGION, ofm.region)
    generate_addresses(
        emit,
        [cmd1.NPU_SET_OFM_BASE0, cmd1.NPU_SET_OFM_BASE1, cmd1.NPU_SET_OFM_BASE2, cmd1.NPU_SET_OFM_BASE3],
        ofm.tiles.addresses,
        ofm.layout,
    )
    generate_tiles(
        emit, [cmd0.NPU_SET_OFM_HEIGHT0_M1, cmd0.NPU_SET_OFM_HEIGHT1_M1, cmd0.NPU_SET_OFM_WIDTH0_M1], ofm.tiles
    )
    emit.cmd0_with_param(cmd0.NPU_SET_OFM_HEIGHT_M1, ofm.shape.height - 1)
    emit.cmd0_with_param(cmd0.NPU_SET_OFM_WIDTH_M1, ofm.shape.width - 1)
    emit.cmd0_with_param(cmd0.NPU_SET_OFM_DEPTH_M1, ofm.shape.depth - 1)
    generate_strides(emit, ofm, cmd1.NPU_SET_OFM_STRIDE_C, cmd1.NPU_SET_OFM_STRIDE_Y, cmd1.NPU_SET_OFM_STRIDE_X)
    emit.cmd0_with_param(cmd0.NPU_SET_OFM_ZERO_POINT, int(ofm.quantization.zero_point))


def generate_kernel(emit: CommandStreamEmitter, kernel: NpuKernel, block_traversal: NpuBlockTraversal):
    """Generates KERNEL related registers"""
    emit.cmd0_with_param(cmd0.NPU_SET_KERNEL_HEIGHT_M1, kernel.dilation_y * (kernel.height - 1))
    emit.cmd0_with_param(cmd0.NPU_SET_KERNEL_WIDTH_M1, kernel.dilation_x * (kernel.width - 1))
    # set kernel x stride low bit
    stride = (kernel.stride_x - 1) & 1
    # set kernel y stride low bit
    stride |= (kernel.stride_y - 1 & 1) << 1
    # set kernel x stride extension bits
    stride |= (kernel.stride_x - 1 >> 1) << 6
    # set kernel y stride extension bits
    stride |= (kernel.stride_y - 1 >> 1) << 9
    stride |= (kernel.dilation_x - 1) << 3
    stride |= (kernel.dilation_y - 1) << 4
    if block_traversal == NpuBlockTraversal.PART_KERNEL_FIRST:
        stride |= 1 << 2
    emit.cmd0_with_param(cmd0.NPU_SET_KERNEL_STRIDE, stride)


def generate_weights(emit: CommandStreamEmitter, weights: List[NpuAddressRange], arch: ArchitectureFeatures):
    """Generates WEIGHT registers"""
    if len(weights) == 0:
        return
    emit.cmd0_with_param(cmd0.NPU_SET_WEIGHT_REGION, weights[0].region)
    # Set weights sources for active and present cores
    for core, (addr, length) in enumerate(
        [
            (cmd1.NPU_SET_WEIGHT_BASE, cmd1.NPU_SET_WEIGHT_LENGTH),
            (cmd1.NPU_SET_WEIGHT1_BASE, cmd1.NPU_SET_WEIGHT1_LENGTH),
        ]
    ):
        if core < len(weights):
            emit.cmd1_with_address(addr, weights[core].address)
            emit.cmd1_with_offset(length, weights[core].length)
        elif core < arch.ncores:
            emit.cmd1_with_address(addr, weights[0].address)
            emit.cmd1_with_offset(length, 0)


def generate_biases(emit: CommandStreamEmitter, biases: List[NpuAddressRange], arch: ArchitectureFeatures):
    """Generates SCALE registers"""
    if len(biases) == 0:
        return
    emit.cmd0_with_param(cmd0.NPU_SET_SCALE_REGION, biases[0].region)
    # Set weights sources for active and present cores
    for core, (addr, length) in enumerate(
        [(cmd1.NPU_SET_SCALE_BASE, cmd1.NPU_SET_SCALE_LENGTH), (cmd1.NPU_SET_SCALE1_BASE, cmd1.NPU_SET_SCALE1_LENGTH)]
    ):
        if core < len(biases):
            emit.cmd1_with_address(addr, biases[core].address)
            emit.cmd1_with_offset(length, biases[core].length)
        elif core < arch.ncores:
            emit.cmd1_with_address(addr, biases[0].address)
            emit.cmd1_with_offset(length, 0)


def generate_block_config(
    emit: CommandStreamEmitter,
    npu_op: NpuBlockOperation,
    arch: ArchitectureFeatures,
    shared_buffer: SharedBufferAllocation,
):
    """Generates OFM_BLK_HEIGHT/WIDTH/DEPTH registers"""
    block_config = npu_op.block_config
    assert block_config is not None, "block_config has not been set"
    alloc = shared_buffer.try_block(Block(block_config.width, block_config.height, block_config.depth))
    assert alloc is not None, f"Block config {block_config} does not fit, op: {npu_op.op_type}"
    emit.cmd0_with_param(cmd0.NPU_SET_OFM_BLK_HEIGHT_M1, block_config.height - 1)
    emit.cmd0_with_param(cmd0.NPU_SET_OFM_BLK_WIDTH_M1, block_config.width - 1)
    emit.cmd0_with_param(cmd0.NPU_SET_OFM_BLK_DEPTH_M1, block_config.depth - 1)


def generate_shram_registers_elementwise(
    emit: CommandStreamEmitter,
    npu_op: NpuElementWiseOperation,
    arch: ArchitectureFeatures,
    shared_buffer: SharedBufferAllocation,
):
    """Generates IB_END/IB_START/AB_START registers for elementwise operations"""
    # For elementwise set the required SHRAM to be equal to the total size of available SHRAM
    uses_lut = npu_op.activation is not None and npu_op.activation.op_type == NpuActivationOp.TABLE_LOOKUP
    shram_required = arch.available_shram_banks(uses_lut)

    # Acc buffers not needed so set AB_START to size of SHRAM
    emit.cmd0_with_param(cmd0.NPU_SET_IFM_IB_END, shram_required)
    emit.cmd0_with_param(cmd0.NPU_SET_AB_START, shram_required)
    if has_ifm2(npu_op):
        # Set IFM2_IB_START to the latter half of the IB space
        ifm_ib_start = shared_buffer.bank_locations[SharedBufferArea.IFM]
        emit.cmd0_with_param(
            cmd0.NPU_SET_IFM2_IB_START, (shram_required - ifm_ib_start) // shared_buffer.ifm_count + ifm_ib_start,
        )
    emit.cmd0_with_param(cmd0.NPU_SET_ACC_FORMAT, acc_format_map[shared_buffer.use_accumulator_element])


def generate_shram_registers_non_elementwise(emit: CommandStreamEmitter, shared_buffer: SharedBufferAllocation):
    """Generates IB_END/IB_START/AB_START registers for non-elementwise operations"""
    emit.cmd0_with_param(
        cmd0.NPU_SET_IFM_IB_END,
        shared_buffer.bank_locations[SharedBufferArea.IFM] + shared_buffer.banks_required[SharedBufferArea.IFM],
    )
    emit.cmd0_with_param(cmd0.NPU_SET_AB_START, shared_buffer.bank_locations[SharedBufferArea.Accumulators])
    emit.cmd0_with_param(cmd0.NPU_SET_ACC_FORMAT, acc_format_map[shared_buffer.use_accumulator_element])


def create_shared_buffer(npu_op: NpuBlockOperation, arch: ArchitectureFeatures) -> SharedBufferAllocation:
    """Creates shared buffer allocation for the given operation"""
    if isinstance(npu_op, NpuConv2DOperation):
        block_type = NpuBlockType.ConvolutionMxN
    elif isinstance(npu_op, NpuConvDepthWiseOperation):
        block_type = NpuBlockType.ConvolutionDepthWise
    elif isinstance(npu_op, NpuPoolingOperation):
        block_type = NpuBlockType.ReduceSum if npu_op.sub_op_type == NpuPoolingOp.REDUCE_SUM else NpuBlockType.Pooling
    elif isinstance(npu_op, NpuElementWiseOperation):
        block_type = NpuBlockType.ElementWise
    else:
        assert 0, "Unsupported operation"
    ifm_resampling_mode = resampling_mode_map[npu_op.ifm_upscale]
    return shared_buffer_allocation_for_npu_op(arch, npu_op, block_type, ifm_resampling_mode)


def generate_cmd_waits(emit: CommandStreamEmitter, cmd_waits: Watermark):
    """Generates KERNEL_WAIT/DMA_WAIT"""
    if cmd_waits.npu >= 0:
        emit.cmd_wait(cmd0.NPU_OP_KERNEL_WAIT, 0, cmd_waits.npu)

    if cmd_waits.dma >= 0:
        emit.cmd_wait(cmd0.NPU_OP_DMA_WAIT, 0, cmd_waits.dma)


def generate_common(
    emit: CommandStreamEmitter,
    npu_op: NpuBlockOperation,
    block_traversal: NpuBlockTraversal,
    arch: ArchitectureFeatures,
    use_global_scale: bool = False,
    op_to_scale: int = 0,
):
    """Generate registers that are common to most operations"""
    assert npu_op.ifm is not None and npu_op.ofm is not None
    generate_ifm(emit, npu_op.ifm)
    generate_ifm_precision(emit, npu_op.ifm, op_to_scale, cmd0.NPU_SET_IFM_PRECISION)
    emit.cmd0_with_param(cmd0.NPU_SET_IFM_UPSCALE, resampling_mode_map[npu_op.ifm_upscale])
    if npu_op.padding is not None:
        generate_padding(emit, npu_op.padding)
    generate_ofm(emit, npu_op.ofm)
    generate_ofm_precision(emit, npu_op, use_global_scale)
    if npu_op.op_type != NpuOperationType.ElementWise:
        assert npu_op.kernel is not None
        generate_kernel(emit, npu_op.kernel, block_traversal)
    generate_weights(emit, npu_op.weights, arch)
    generate_biases(emit, npu_op.biases, arch)
    generate_activation(emit, npu_op.activation, npu_op.ofm)
    shared_buffer = create_shared_buffer(npu_op, arch)
    generate_block_config(emit, npu_op, arch, shared_buffer)
    if isinstance(npu_op, NpuElementWiseOperation):
        generate_shram_registers_elementwise(emit, npu_op, arch, shared_buffer)
    else:
        generate_shram_registers_non_elementwise(emit, shared_buffer)


# -------------------------------------------------------------------
# SCALING
# -------------------------------------------------------------------


def generate_ofm_scaling_for_pooling(emit: CommandStreamEmitter, pool_op: NpuPoolingOperation):
    """Generates OFM_SCALE register for pooling operations"""
    # For valid padding vela has to output scaling values
    kernel = pool_op.kernel
    ifm_quant = pool_op.ifm.quantization
    ofm_quant = pool_op.ofm.quantization
    if pool_op.activation is not None and pool_op.activation.op_type in (NpuActivationOp.SIGMOID, NpuActivationOp.TANH):
        assert ifm_quant.scale_f32 is not None
        rescale = 0x3000 * ifm_quant.scale_f32
        if pool_op.ifm.data_type == NpuDataType.INT16:
            # Calculate scale and shift for the output scale of 1/(3*4096)
            shift = 0
            max_rescale = np.iinfo(np.int16).max / 2
            while rescale <= max_rescale and shift <= 30:
                shift += 1
                rescale *= 2
            scale = int(rescale)
        else:
            rescale_bits = len(bin(round_up_to_int(rescale))) - 2 + 1
            scale, shift = scaling.quantise_pooling_scale(kernel.height * kernel.width, rescale_bits)
            scale = int(round_away_zero(scale * rescale))
    elif pool_op.fused_quantize:
        # Quantize op requires different scaling
        ifm_scale_f64 = np.double(ifm_quant.scale_f32)
        ofm_scale_f64 = np.double(ofm_quant.scale_f32)
        scale, shift = scaling.quantise_scale(ifm_scale_f64 / ofm_scale_f64)
    elif pool_op.rescale is not None:
        # for ResizeBilinear operations with rescale
        rescale = pool_op.rescale
        rescale_bits = len(bin(round_up_to_int(rescale))) - 2 + 1
        scale, shift = scaling.quantise_pooling_scale(kernel.height * kernel.width, rescale_bits)
        scale = int(round_away_zero(scale * rescale))
    else:
        # In case avg pool fused with concat or other memory operation, rescaling might be needed.
        # kernel height == kernel width == 1 is always true in this case
        # Normally the scale is maximised, to get maximum precision, which means that
        # if rescale != 1, scale need to consider the number of bits needed for rescaling
        if ofm_quant.scale_f32 is not None and ifm_quant.scale_f32 is not None:
            rescale = ifm_quant.scale_f32 / ofm_quant.scale_f32
            rescale_bits = 0
            if kernel.height == kernel.width == 1:
                if rescale > 1:
                    rescale_bits = len(bin(round_up_to_int(rescale))) - 2 + 1
                elif rescale < 1:
                    rescale_bits = -(len(bin(round_up_to_int(1 / rescale))) - 2 - 1)
            scale, shift = scaling.quantise_pooling_scale(kernel.height * kernel.width, rescale_bits)
            scale = int(round_away_zero(scale * rescale))
        else:
            scale = 1
            shift = 0

    emit.cmd1_with_offset(cmd1.NPU_SET_OFM_SCALE, scale, shift)


def generate_scaling_for_elementwise(emit: CommandStreamEmitter, npu_op: NpuElementWiseOperation) -> int:
    """
    Generates OFM/OPA/OPB_SCALE registers for elementwise operators.
    Returns the operator to scale
    """
    op_to_scale = 0
    if npu_op.sub_op_type in (NpuElementWiseOp.ADD, NpuElementWiseOp.MUL, NpuElementWiseOp.SUB):
        input_scale = npu_op.ifm.quantization.scale_f32 if npu_op.ifm.quantization else None
        input2_scale = npu_op.ifm2.quantization.scale_f32 if npu_op.ifm2.quantization else None
        output_scale = npu_op.ofm.quantization.scale_f32 if npu_op.ofm.quantization else None

        if npu_op.activation is not None and npu_op.activation.op_type in (
            NpuActivationOp.SIGMOID,
            NpuActivationOp.TANH,
        ):
            output_scale = 1 / 0x3000

        if npu_op.sub_op_type == NpuElementWiseOp.MUL:
            if None in (input_scale, input2_scale, output_scale):
                ofm_scale = 1
                shift = 0
            else:
                ofm_scale, shift = scaling.elementwise_mul_scale(input_scale, input2_scale, output_scale)
            emit.cmd1_with_offset(cmd1.NPU_SET_OFM_SCALE, ofm_scale, shift)
        else:  # Add/Sub
            if None in (input_scale, input2_scale, output_scale):
                opa_scale = opb_scale = ofm_scale = 1
                opa_shift = shift = 0
                if npu_op.rescale is not None:
                    ofm_scale, shift = npu_op.rescale
            elif input_scale == input2_scale:
                opa_scale, opb_scale, ofm_scale, shift = scaling.simplified_elementwise_add_sub_scale(
                    input_scale, input2_scale, output_scale
                )
                opa_shift = 0  # Unused for this case
            else:
                # Use advanced implementation only when input scales differ
                bitdepth = npu_op.ifm.data_type.size_in_bits()
                (opa_scale, opa_shift, ofm_scale, shift, op_to_scale,) = scaling.advanced_elementwise_add_sub_scale(
                    input_scale, input2_scale, output_scale, bitdepth
                )
                opb_scale = 0  # Unused for this case
                if npu_op.reversed_operands:
                    # If the operand order is reversed we also have to swap which operand is scaled
                    if op_to_scale == scaling.OperandToScale.OPa:
                        op_to_scale = scaling.OperandToScale.OPb
                    else:
                        op_to_scale = scaling.OperandToScale.OPa
            emit.cmd1_with_offset(cmd1.NPU_SET_OPA_SCALE, opa_scale, opa_shift)
            emit.cmd1_with_offset(cmd1.NPU_SET_OPB_SCALE, opb_scale)
            emit.cmd1_with_offset(cmd1.NPU_SET_OFM_SCALE, ofm_scale, shift)
    elif npu_op.sub_op_type in (NpuElementWiseOp.LRELU, NpuElementWiseOp.ABS):
        output_scale = npu_op.ofm.quantization.scale_f32
        ofm_scale, shift = scaling.quantise_scale(output_scale)
        emit.cmd1_with_offset(cmd1.NPU_SET_OFM_SCALE, ofm_scale, shift)
    else:
        emit.cmd1_with_offset(cmd1.NPU_SET_OFM_SCALE, 1, 0)
    return op_to_scale


# -------------------------------------------------------------------
# PRINT
# -------------------------------------------------------------------


def print_feature_map(fm: NpuFeatureMap, name: str):
    if fm is not None:
        q = (
            "no quantization"
            if fm.quantization is None
            else f"scale: {fm.quantization.scale_f32}, zero: {fm.quantization.zero_point}"
        )
        h, w, c = fm.shape
        sz = h * w * c * fm.data_type.size_in_bytes()
        print(f"      {name}: h={h},w={w},c={c}, region={fm.region}, {fm.layout}, {fm.data_type}, size={sz}, {q}")
        strides = get_strides(fm)
        stride_str = f"Stride y/x/c: {strides.height}/{strides.width}/{strides.depth}"
        t = fm.tiles
        addresses = [hex(addr) for addr in t.addresses]
        print(f"         {stride_str}, tiles: w0={t.width_0}, h0={t.height_0}, h1={t.height_1}, base={addresses}")


def print_operation(npu_op: NpuOperation, index: int = 0, cmd=None):
    pass_info = f", {cmd}" if cmd else ""
    if isinstance(npu_op, NpuOperation) and not isinstance(npu_op, (NpuDmaOperation, NpuBlockOperation)):
        print(f"{index} {npu_op.op_type.name}{pass_info}")
        return
    if isinstance(npu_op, NpuDmaOperation):
        print(f"{index} DMA_START src={npu_op.src}, dest={npu_op.dest}{pass_info}")
        return
    k = None if npu_op.kernel is None else to_kernel(npu_op.kernel)
    if isinstance(npu_op, (NpuPoolingOperation, NpuElementWiseOperation)):
        print(f"{index} {npu_op.sub_op_type.name} {npu_op.op_type.name}:{pass_info}")
    else:
        if (
            isinstance(npu_op, NpuConv2DOperation)
            and k.elements_wh() * k.stride.x * k.stride.y * k.dilation.x * k.dilation.y == 1
        ):
            fc = "FullyConnected "
        else:
            fc = ""
        print(f"{index} {fc}{npu_op.op_type.name}{pass_info}")
    print_feature_map(npu_op.ifm, "IFM")
    if npu_op.ifm2_scalar is not None:
        quant_val = quantise(npu_op.ifm2_scalar, npu_op.ifm2.quantization)
        print(f"      IFM2: Scalar={npu_op.ifm2_scalar} (quantized: {quant_val}), {npu_op.ifm2.quantization}")
    else:
        print_feature_map(npu_op.ifm2, "IFM2")
    print_feature_map(npu_op.ofm, "OFM")
    if k is not None and npu_op.op_type != NpuOperationType.ElementWise:
        print(f"      Kernel: {k}")
    if npu_op.padding is not None:
        print(f"      {npu_op.padding}")
    for weights in npu_op.weights:
        print(f"      Weights: {weights}")
    for bias in npu_op.biases:
        print(f"      Scales: {bias}")
    if npu_op.activation is not None:
        act = npu_op.activation
        if act.op_type != NpuActivationOp.NONE_OR_RELU or act.min is not None or act.max is not None:
            lut = f", lut index={act.lookup_table_index}" if act.op_type == NpuActivationOp.TABLE_LOOKUP else ""
            print(f"      Activation: {act.op_type.name}, min={act.min}, max={act.max}{lut}")
    if isinstance(npu_op, NpuConv2DOperation):
        print(f"      {npu_op.block_traversal}")
    bh, bw, bc = npu_op.block_config
    rescale = (
        f", rescale={npu_op.rescale}" if isinstance(npu_op, (NpuPoolingOperation, NpuElementWiseOperation)) else ""
    )
    print(f"      Block config: h={bh},w={bw},c={bc}, {npu_op.ifm_upscale}, {npu_op.rounding_mode}{rescale}")


def print_operations(npu_op_list: List[NpuOperation], npu_op_to_cmd=None):
    npu_op_to_cmd = dict() if npu_op_to_cmd is None else npu_op_to_cmd
    for index, npu_op in enumerate(npu_op_list):
        print_operation(npu_op, index, npu_op_to_cmd.get(npu_op))


# -------------------------------------------------------------------
# OPERATIONS
# -------------------------------------------------------------------


def generate_operation_code(emit: CommandStreamEmitter, npu_op: NpuOperation):
    """Generates NPU_OP_* command"""
    if isinstance(npu_op, NpuDmaOperation):
        emit.cmd_do_operation(cmd0.NPU_OP_DMA_START, npu_op.channel * 16 + npu_op.mode)
    elif isinstance(npu_op, NpuConv2DOperation):
        emit.cmd_do_operation(cmd0.NPU_OP_CONV)
    elif isinstance(npu_op, NpuConvDepthWiseOperation):
        emit.cmd_do_operation(cmd0.NPU_OP_DEPTHWISE)
    elif isinstance(npu_op, NpuPoolingOperation):
        emit.cmd_do_operation(cmd0.NPU_OP_POOL, param=pooling_op_map[npu_op.sub_op_type])
    elif isinstance(npu_op, NpuElementWiseOperation):
        emit.cmd_do_operation(cmd0.NPU_OP_ELEMENTWISE, param=elementwise_op_map[npu_op.sub_op_type])
    else:
        assert 0, "Unsupported operation"


def generate_conv2d_op(emit: CommandStreamEmitter, npu_op: NpuConv2DOperation, arch: ArchitectureFeatures):
    """Generates register commands for Conv2D operations"""
    generate_common(emit, npu_op, npu_op.block_traversal, arch)


def generate_conv_depthwise_op(
    emit: CommandStreamEmitter, npu_op: NpuConvDepthWiseOperation, arch: ArchitectureFeatures
):
    """Generates register commands for depthwise convolution operations"""
    generate_common(emit, npu_op, NpuBlockTraversal.DEPTH_FIRST, arch)


def generate_pooling_op(emit: CommandStreamEmitter, npu_op: NpuPoolingOperation, arch: ArchitectureFeatures):
    """Generates register commands for pooling operations"""
    use_global_scale = (
        npu_op.sub_op_type in (NpuPoolingOp.AVERAGE, NpuPoolingOp.REDUCE_SUM) and sum(npu_op.padding) == 0
    )
    generate_common(emit, npu_op, NpuBlockTraversal.DEPTH_FIRST, arch, use_global_scale=use_global_scale)
    # Pooling op specific
    if use_global_scale:
        generate_ofm_scaling_for_pooling(emit, npu_op)


def generate_elementwise_op(emit: CommandStreamEmitter, npu_op: NpuElementWiseOperation, arch: ArchitectureFeatures):
    """Generates register commands for elementwise operations"""
    use_global_scale = npu_op.sub_op_type in (
        NpuElementWiseOp.ADD,
        NpuElementWiseOp.SUB,
        NpuElementWiseOp.MUL,
        NpuElementWiseOp.LRELU,
        NpuElementWiseOp.ABS,
    )
    op_to_scale = generate_scaling_for_elementwise(emit, npu_op)
    generate_common(
        emit, npu_op, NpuBlockTraversal.DEPTH_FIRST, arch, use_global_scale=use_global_scale, op_to_scale=op_to_scale
    )
    # Elementwise op specific
    if npu_op.sub_op_type not in UNARY_ELEMWISE_OPS:
        # Binary operation; generate IFM2 registers
        assert npu_op.ifm2 is not None
        has_scalar = npu_op.ifm2_scalar is not None
        generate_ifm2(emit, npu_op.ifm2, has_scalar)
        generate_ifm_precision(emit, npu_op.ifm2, 0, cmd0.NPU_SET_IFM2_PRECISION)
        generate_ifm2_broadcast(emit, npu_op)
        if has_scalar:
            quantized_scalar = quantise(npu_op.ifm2_scalar, npu_op.ifm2.quantization)
            assert npu_op.ifm2.data_type.min_value() <= quantized_scalar <= npu_op.ifm2.data_type.max_value()
            emit.cmd0_with_param(cmd0.NPU_SET_IFM2_SCALAR, quantized_scalar)


def generate_dma_op(emit: CommandStreamEmitter, dma_op: NpuDmaOperation):
    """Generates register commands for DMA operations"""
    emit.cmd0_with_param(cmd0.NPU_SET_DMA0_SRC_REGION, dma_op.src.region)
    emit.cmd1_with_address(cmd1.NPU_SET_DMA0_SRC, dma_op.src.address)
    emit.cmd0_with_param(cmd0.NPU_SET_DMA0_DST_REGION, dma_op.dest.region)

    emit.cmd1_with_address(cmd1.NPU_SET_DMA0_DST, dma_op.dest.address)
    emit.cmd1_with_address(cmd1.NPU_SET_DMA0_LEN, dma_op.src.length)


def generate_registers_for_op(emit: CommandStreamEmitter, npu_op: NpuOperation, arch: ArchitectureFeatures):
    """
    Generates register commands for the given operation, but not the final NPU_OP_... command.
    Returns the selected block config
    """
    if isinstance(npu_op, NpuConv2DOperation):
        generate_conv2d_op(emit, npu_op, arch)
    elif isinstance(npu_op, NpuConvDepthWiseOperation):
        generate_conv_depthwise_op(emit, npu_op, arch)
    elif isinstance(npu_op, NpuPoolingOperation):
        generate_pooling_op(emit, npu_op, arch)
    elif isinstance(npu_op, NpuElementWiseOperation):
        generate_elementwise_op(emit, npu_op, arch)
    elif isinstance(npu_op, NpuDmaOperation):
        generate_dma_op(emit, npu_op)
    else:
        assert 0, "Unsupported operation"


def generate_command_stream(
    npu_op_list: List[NpuOperation], arch: ArchitectureFeatures, verbose: bool, add_to_debug_db=None, npu_op_to_cmd=None
) -> List[int]:
    """
    Generates register commands for the given list of NPU operations.
    Returns Ethos-U instructions, as a list of 32-bit integers.
    """
    emit = CommandStreamEmitter()
    if verbose:
        print_operations(npu_op_list, npu_op_to_cmd)
    # Calculate memory accesses for every operation
    memory_accesses: Dict[NpuOperation, MemoryAccessSet] = {}
    for npu_op in npu_op_list:
        if isinstance(npu_op, NpuDmaOperation):
            memory_accesses[npu_op] = get_dma_memory_accesses(npu_op)
        elif isinstance(npu_op, NpuBlockOperation):
            memory_accesses[npu_op] = get_op_memory_accesses(npu_op, arch)
        else:
            assert 0, "Invalid operation type"
    if arch.is_ethos_u65_system:
        emit.cmd0_with_param(cmd0.NPU_SET_PARALLEL_MODE, arch.ncores - 1)
    dep_watermark = Watermark(0, 0)
    prev_op = None
    # Generate register commands for all operations
    for op_index, npu_op in enumerate(npu_op_list):
        dep_watermark, cmd_waits = get_wait_dependency(arch, npu_op_list, memory_accesses, op_index, dep_watermark)
        generate_registers_for_op(emit, npu_op, arch)
        if not isinstance(npu_op, NpuDmaOperation) and isinstance(npu_op, NpuBlockOperation):
            # Generate BLOCKDEP
            blockdep = calc_blockdep(arch, prev_op, npu_op)
            blockdep = min(blockdep, arch.max_blockdep)
            emit.cmd0_with_param(cmd0.NPU_SET_BLOCKDEP, blockdep)
            prev_op = npu_op

        generate_cmd_waits(emit, cmd_waits)
        # Generate the actual NPU_OP command
        generate_operation_code(emit, npu_op)
        if add_to_debug_db is not None:
            add_to_debug_db(npu_op, emit.offset)
    # Fill in final part of command stream:
    emit.cmd_do_operation(cmd0.NPU_OP_STOP, param=0xFFFF)
    res = emit.to_list()

    if emit.size_in_bytes() >= 1 << 24:
        raise VelaError(
            f"The command stream size exceeds the hardware limit of 16 MiB. "
            f"The current stream size is {emit.size_in_bytes()/2**20:.2F} MiB."
        )

    if verbose:
        emit.print_cmds()
        print("number of commands", len(emit.cmd_stream))
        print("command stream length in words", len(res))
    return res


# -------------------------------------------------------------------
# EXTERNAL API
# -------------------------------------------------------------------


def find_block_configs(npu_op: NpuOperation, npu_accelerator: NpuAccelerator) -> List[NpuShape3D]:
    """
    Internal implementation of the public facing API for finding block configs.
    """
    if isinstance(npu_op, NpuBlockOperation):
        arch = create_default_arch(Accelerator.from_npu_accelerator(npu_accelerator))
        shared_buffer = create_shared_buffer(npu_op, arch)
        blocks = find_suitable_block_configs(arch, shared_buffer)
        return [NpuShape3D(height=block[0], width=block[1], depth=block[3]) for block in blocks]
    return []


def generate_register_command_stream(npu_op_list: List[NpuOperation], npu_accelerator: NpuAccelerator) -> List[int]:
    """
    Internal implementation of the public facing API for generating an Ethos-U register command stream.
    Calculates dependencies between commands and inserts wait operations if needed.

    :param npu_op_list: List[NpuOperation] list of high level NPU operations
    :param accelerator: architecture_features.Accelerator enum to pick the correct Ethos-U accelerator
    :return Ethos-U instructions, as a list of 32-bit integers
    """
    accelerator = Accelerator.from_npu_accelerator(npu_accelerator)
    arch = create_default_arch(accelerator)
    return generate_command_stream(npu_op_list, arch, verbose=False)