# Copyright (C) 2020 Arm Limited or its affiliates. All rights reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
# Licensed under the Apache License, Version 2.0 (the License); you may
# not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an AS IS BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Description:
# Functions used to write to a TensorFlow Lite format file. Supports adding in file identifiers.
import flatbuffers
import flatbuffers.number_types as N
import numpy as np
from flatbuffers import encode
from flatbuffers.builder import UOffsetTFlags

from .nn_graph import PassPlacement
from .operation import Op
from .tensor import MemType
from .tensor import TensorPurpose
from .tflite import Buffer
from .tflite import Metadata
from .tflite import Model
from .tflite import Operator
from .tflite import OperatorCode
from .tflite import QuantizationParameters
from .tflite import SubGraph
from .tflite import Tensor
from .tflite_mapping import builtin_operator_inv_map
from .tflite_mapping import BuiltinOperator
from .tflite_mapping import datatype_inv_map

# ugh, the python flatbuffer interface is missing a method to add in file identifier. patching it in here:

tflite_version = 3
tflite_file_identifier = "TFL" + str(tflite_version)


def FinishWithFileIdentifier(self, rootTable, fid):
    if fid is None or len(fid) != 4:
        raise Exception("fid must be 4 chars")

    flags = N.Uint8Flags
    prepSize = 4
    self.Prep(self.minalign, prepSize + len(fid))
    for i in range(3, -1, -1):
        self.head = self.head - flags.bytewidth
        encode.Write(flags.packer_type, self.Bytes, self.Head(), ord(fid[i]))

    return self.Finish(rootTable)


flatbuffers.Builder.FinishWithFileIdentifier = FinishWithFileIdentifier


def make_vector(v):
    try:
        len(v)
        return v
    except TypeError:
        return [v]


class TFLiteSerialiser:
    def __init__(self, nng):
        self.builder = flatbuffers.Builder(0)
        self.nng = nng

        self.scratch_buf_id = 0  # Always assign scratch to buffer 0
        self.scratch_fast_buf_id = 1  # Always assign scratch_fast to buffer 1
        self.buffers_to_write = []  # have an empty array there

        self.ops_to_ignore = set((Op.Const, Op.Placeholder, Op.SubgraphInput))

        self.tensors_to_reshape = {}

        self.subgraphs_to_write = [sg for sg in self.nng.subgraphs if sg.placement == PassPlacement.Cpu]

        all_ops = []
        for sg in self.subgraphs_to_write:
            for ps in sg.passes:
                for op in ps.ops:
                    if op.type not in self.ops_to_ignore:
                        all_ops.append(op)
                    if op.type.is_conv2d_op() or op.type.is_depthwise_conv2d_op():
                        # If values are None op has non-constant weights
                        if op.inputs[1].values is not None:
                            self.tensors_to_reshape[op.inputs[1]] = (3, 0, 1, 2)
                    if op.type == Op.FullyConnected:
                        # If values are None op has non-constant weights
                        if op.inputs[1].values is not None:
                            self.tensors_to_reshape[op.inputs[1]] = (1, 0)

        # list of tuple(Op, string); the custom code is only used for 3rd party custom operators
        self.operator_codes = sorted(set((op.type, op.attrs.get("custom_code", "")) for op in all_ops))
        self.operator_code_map = {}

    def write_byte_vector(self, v, alignment=1):
        builder = self.builder
        builder.StartVector(1, len(v), alignment)
        for e in v[::-1]:
            builder.PrependByte(e)
        return builder.EndVector(len(v))

    def write_int_vector(self, v):
        builder = self.builder
        builder.StartVector(4, len(v), 4)
        for e in v[::-1]:
            builder.PrependInt32(e)
        return builder.EndVector(len(v))

    def write_long_vector(self, v):
        builder = self.builder
        builder.StartVector(8, len(v), 8)
        for e in v[::-1]:
            builder.PrependInt64(e)
        return builder.EndVector(len(v))

    def write_float_vector(self, v):
        builder = self.builder
        builder.StartVector(4, len(v), 4)
        for e in v[::-1]:
            builder.PrependFloat32(e)
        return builder.EndVector(len(v))

    def write_offset_vector(self, v):
        builder = self.builder
        builder.StartVector(4, len(v), 4)
        for e in v[::-1]:
            builder.PrependUOffsetTRelative(e)
        return builder.EndVector(len(v))

    def assign_buffers_to_tensors(self, tensors, scratch_tensor):
        if scratch_tensor is not None:
            scratch_tensor_mem_area = scratch_tensor.mem_area
        else:
            scratch_tensor_mem_area = None  # all tensors are initialised to MemArea.Unknown

        buffer_map = {}

        buf_idx = 2

        for tens in tensors:
            # Set buffer ids depending on allocation
            if tens.is_allocated_in_tensor_arena(scratch_tensor_mem_area):
                buffer_map[tens] = self.scratch_buf_id
            elif tens.mem_type == MemType.Scratch_fast:
                # For Scratch_fast when not co-allocated with scratch in the TensorArena:
                buffer_map[tens] = self.scratch_fast_buf_id
            else:
                buffer_map[tens] = buf_idx
                buf_idx += 1

        # Initialize buffers_to_write to a length equal to number of buffers so
        # they can be appended at the correct index during tensor serialization
        self.buffers_to_write = [None] * (buf_idx)

        return buffer_map

    def serialise_operator_code(self, idx, op_type, custom_code):
        builder = self.builder
        custom_code_offset = None
        if op_type == Op.Custom:
            tf_code, opt_serializer = builtin_operator_inv_map[op_type]
            custom_code_offset = builder.CreateString(custom_code)
        else:
            assert (
                op_type in builtin_operator_inv_map
            ), "Vela does not contain a mapping to serialise {} operator to a TensorFlow Lite operator".format(op_type)
            tf_code, opt_serializer = builtin_operator_inv_map[op_type]

            if tf_code == BuiltinOperator.CUSTOM:
                assert (
                    op_type == Op.CustomNpuOp
                ), "Vela only supports serialising NpuOp operators as TensorFlow Lite Custom operators"
                custom_code_offset = builder.CreateString("ethos-u")

        self.operator_code_map[op_type] = (idx, tf_code, opt_serializer)

        OperatorCode.OperatorCodeStart(builder)
        OperatorCode.OperatorCodeAddBuiltinCode(builder, tf_code)
        if custom_code_offset is not None:
            OperatorCode.OperatorCodeAddCustomCode(builder, custom_code_offset)

        return OperatorCode.OperatorCodeEnd(builder)

    def serialise_quantization_parameters(self, quant):
        builder = self.builder

        min = None
        max = None
        scale = None
        zero_point = None
        if quant is not None:
            if quant.min is not None:
                min = self.write_float_vector(make_vector(quant.min))
            if quant.max is not None:
                max = self.write_float_vector(make_vector(quant.max))
            if quant.scale_f32 is not None:
                scale = self.write_float_vector(make_vector(quant.scale_f32))
            if quant.zero_point is not None:
                zero_point = self.write_long_vector(make_vector(quant.zero_point))

        QuantizationParameters.QuantizationParametersStart(builder)
        if min is not None:
            QuantizationParameters.QuantizationParametersAddMin(builder, min)
        if max is not None:
            QuantizationParameters.QuantizationParametersAddMax(builder, max)
        if scale is not None:
            QuantizationParameters.QuantizationParametersAddScale(builder, scale)
        if zero_point is not None:
            QuantizationParameters.QuantizationParametersAddZeroPoint(builder, zero_point)
        return QuantizationParameters.QuantizationParametersEnd(builder)

    def serialise_tensor(self, tens):
        builder = self.builder
        tens_shape = tens.shape
        values = tens.quant_values
        if values is None:
            values = tens.values

        if values is None:
            values = np.empty(shape=(0), dtype=np.uint8)

        if tens in self.tensors_to_reshape:
            reorder = self.tensors_to_reshape[tens]
            tens_shape = [tens_shape[idx] for idx in reorder]
            values = values.transpose(reorder)

        if tens.purpose == TensorPurpose.Scratch:
            tens_shape = [0]

        buf_id = self.buffer_map[tens]
        self.buffers_to_write[buf_id] = values.flatten().view(np.uint8)

        shape = self.write_int_vector(tens_shape)

        name = builder.CreateString(tens.name)
        quant = self.serialise_quantization_parameters(tens.quantization)

        Tensor.TensorStart(builder)
        Tensor.TensorAddShape(builder, shape)
        Tensor.TensorAddType(builder, datatype_inv_map[tens.dtype])
        # All tensors must have a valid backing buffer, even if it is empty.
        # Empty buffers should be kept unique for TensorFlow Lite Micro
        Tensor.TensorAddBuffer(builder, buf_id)
        Tensor.TensorAddName(builder, name)
        Tensor.TensorAddQuantization(builder, quant)

        res = Tensor.TensorEnd(builder)
        return res

    def serialise_operator(self, op):
        builder = self.builder

        inputs_offset = self.write_int_vector([self.tensor_map[tens] for tens in op.inputs if tens in self.tensor_map])
        outputs_offset = self.write_int_vector(
            [self.tensor_map[tens] for tens in op.outputs if tens in self.tensor_map]
        )

        op_idx, tflop, opt_serializer = self.operator_code_map[op.type]

        builtin_opt_offset = None
        custom_opt_offset = None
        if opt_serializer is not None:
            attrs = dict(op.attrs)
            if "strides" in attrs:
                attrs["stride_h"] = attrs["strides"][1]
                attrs["stride_w"] = attrs["strides"][2]
            if "ksize" in attrs:
                attrs["filter_height"] = attrs["ksize"][1]
                attrs["filter_width"] = attrs["ksize"][2]
            if "dilation" in attrs:
                attrs["dilation_h_factor"] = attrs["dilation"][1]
                attrs["dilation_w_factor"] = attrs["dilation"][2]
            if "channel_multiplier" in attrs:
                attrs["depth_multiplier"] = attrs["channel_multiplier"]
            if op.activation is not None:
                attrs["fused_activation_function"] = op.activation

            builtin_opt_offset, custom_opt_offset = opt_serializer.serialize(builder, attrs)

        mutating_variable_inputs_offset = self.write_byte_vector([])
        Operator.OperatorStart(builder)
        Operator.OperatorAddOpcodeIndex(builder, op_idx)
        Operator.OperatorAddInputs(builder, inputs_offset)
        Operator.OperatorAddOutputs(builder, outputs_offset)

        if builtin_opt_offset is not None:
            Operator.OperatorAddBuiltinOptionsType(builder, opt_serializer.builtin_opt_type)
            Operator.OperatorAddBuiltinOptions(builder, builtin_opt_offset)
        if custom_opt_offset is not None:
            Operator.OperatorAddCustomOptions(builder, custom_opt_offset)
            Operator.OperatorAddCustomOptionsFormat(builder, opt_serializer.custom_opt_format)

        Operator.OperatorAddMutatingVariableInputs(builder, mutating_variable_inputs_offset)
        return Operator.OperatorEnd(builder)

    def serialise_subgraph(self, sg):
        builder = self.builder
        tensor_set = set()
        all_ops = []
        placeholder_ops = []

        for ps in sg.passes:
            for op in ps.ops:
                if op.type not in self.ops_to_ignore:
                    all_ops.append(op)
                elif op.type == Op.Placeholder:
                    placeholder_ops.append(op)

        # Add the tensors from all valid ops, as well as the tensors from placeholder ops
        # This allows us to serialise tensors which arent attached to any specific ops,
        # e.g. due to an empty graph containing no ops
        for op in all_ops + placeholder_ops:
            for tens in op.inputs + op.outputs:
                if tens is not None:
                    tensor_set.add(tens)

        all_tensors = [tens for nm, idx, tens in sorted((tens.name, idx, tens) for idx, tens in enumerate(tensor_set))]

        scratch_tensors = [tens for tens in all_tensors if tens.name.endswith("scratch")]

        scratch_fast_tensor = None
        for tens in all_tensors:
            if tens.name.endswith("scratch_fast"):
                scratch_fast_tensor = tens

        if len(scratch_tensors) == 0:
            scratch_tensor = None
        else:
            assert len(scratch_tensors) == 1, "Multiple scratch tensors"
            scratch_tensor = scratch_tensors[0]

        self.tensor_map = {tens: idx for idx, tens in enumerate(all_tensors)}
        self.buffer_map = self.assign_buffers_to_tensors(all_tensors, scratch_tensor)

        tensors_offset = self.write_offset_vector([self.serialise_tensor(tens) for tens in all_tensors])

        # Make sure the input_tensors haven't been modified
        assert all(inp in sg.original_inputs for inp in sg.input_tensors)
        inputs = [self.tensor_map[tens] for tens in sg.original_inputs if tens in self.tensor_map]

        # Add the Scratch Tensors as input to the NPU subgraph to get them allocated by TensorFlow Lite Micro
        scratch_tensor_idx = self.tensor_map.get(scratch_tensor, None)
        scratch_fast_tensor_idx = self.tensor_map.get(scratch_fast_tensor, None)

        if scratch_tensor_idx is not None and scratch_tensor_idx not in inputs:
            inputs.append(scratch_tensor_idx)

        if scratch_fast_tensor_idx is not None and scratch_fast_tensor_idx not in inputs:
            inputs.append(scratch_fast_tensor_idx)

        inputs_offset = self.write_int_vector(inputs)
        outputs_offset = self.write_int_vector(
            [self.tensor_map[tens] for tens in sg.output_tensors if tens in self.tensor_map]
        )

        operators_offset = self.write_offset_vector([self.serialise_operator(op) for op in all_ops])

        SubGraph.SubGraphStart(builder)
        SubGraph.SubGraphAddTensors(builder, tensors_offset)
        SubGraph.SubGraphAddInputs(builder, inputs_offset)
        SubGraph.SubGraphAddOutputs(builder, outputs_offset)

        SubGraph.SubGraphAddOperators(builder, operators_offset)

        return SubGraph.SubGraphEnd(builder)

    def write_aligned_bytes(self, buf):
        builder = self.builder
        builder.nested = True
        data = bytes(buf)
        length_bytes = UOffsetTFlags.py_type(len(data))
        builder.Prep(16, length_bytes)  # Reserve aligned storage
        builder.head = UOffsetTFlags.py_type(builder.Head() - length_bytes)  # Update FlatBuffer internal pointer
        builder.Bytes[builder.Head() : builder.Head() + length_bytes] = data  # Assign bytes to aligned area
        return builder.EndVector(length_bytes)

    def serialise_buffer(self, buf):
        builder = self.builder
        data = None
        if buf is not None:
            data = self.write_aligned_bytes(buf)
        Buffer.BufferStart(builder)
        if data is not None:
            Buffer.BufferAddData(builder, data)
        return Buffer.BufferEnd(builder)

    def serialise_metadata(self, metadata):
        builder = self.builder
        name = builder.CreateString(metadata[0])

        Metadata.MetadataStart(builder)
        Metadata.MetadataAddName(builder, name)
        Metadata.MetadataAddBuffer(builder, metadata[1])

        return Metadata.MetadataEnd(builder)

    def serialise_model(self):
        builder = self.builder
        operator_code_offset = self.write_offset_vector(
            [self.serialise_operator_code(idx, optype, code) for idx, (optype, code) in enumerate(self.operator_codes)]
        )

        description = builder.CreateString("Vela Optimised")

        subgraph_offset = self.write_offset_vector([self.serialise_subgraph(sg) for sg in self.subgraphs_to_write])

        # Fill the metadata buffer
        version = np.int32(0)
        subgraph_idx = np.int32(len(self.subgraphs_to_write))  # Only 1 supported currently
        nbr_tensors = np.int32(len(self.tensor_map))

        # An offset of -1 indicates that the tensor will be allocated online by Tensorflow Lite Micro
        offsets = [np.int32(-1)] * nbr_tensors

        # Ensure that the order of the offsets match the order of the tensors
        for tens, idx in self.tensor_map.items():
            # Set offsets for tensor allocated in Tensor Arena or in the scratch_fast area
            if tens.mem_type in set((MemType.Scratch, MemType.Scratch_fast)) and tens.address is not None:
                offsets[idx] = np.int32(tens.address)

        self.nng.metadata.append(("OfflineMemoryAllocation", np.array([version, subgraph_idx, nbr_tensors] + offsets)))

        metadata_list = []
        for name, buffer in self.nng.metadata:
            self.buffers_to_write.append(buffer)
            metadata_list.append((name, len(self.buffers_to_write) - 1))

        buffers_offset = self.write_offset_vector([self.serialise_buffer(buf) for buf in self.buffers_to_write])
        metadata_offset = self.write_offset_vector([self.serialise_metadata(metadata) for metadata in metadata_list])

        Model.ModelStart(builder)
        Model.ModelAddVersion(builder, tflite_version)
        Model.ModelAddOperatorCodes(builder, operator_code_offset)
        Model.ModelAddSubgraphs(builder, subgraph_offset)
        Model.ModelAddDescription(builder, description)
        Model.ModelAddBuffers(builder, buffers_offset)
        Model.ModelAddMetadata(builder, metadata_offset)
        return Model.ModelEnd(builder)

    def serialise(self):

        model = self.serialise_model()

        self.builder.FinishWithFileIdentifier(model, tflite_file_identifier)

        return self.builder.Output()

    def write(self, filename):
        with open(self.filename, "wb") as f:
            f.write(self.serialised_buf)


def write_tflite(nng, filename):
    writer = TFLiteSerialiser(nng)
    buf = writer.serialise()

    with open(filename, "wb") as f:
        f.write(buf)