# Copyright (C) 2020 Arm Limited or its affiliates. All rights reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
# Licensed under the Apache License, Version 2.0 (the License); you may
# not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an AS IS BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.


# Description:
# Contains classes that hold commands for the high-level command stream (one command per DMA or NPU stripe).

from enum import Enum, IntEnum
import numpy as np
from .operation import NpuBlockType
from .numeric_util import round_up_divide
from .range_set import MemoryAccessSet, AccessDirection


class Box:
    def __init__(self, start_coord, end_coord):
        self.start_coord = list(start_coord)
        self.end_coord = list(end_coord)
        assert len(self.start_coord) == len(end_coord)
        for i in range(len(self.start_coord)):
            assert self.start_coord[i] <= self.end_coord[i]

    def transform_with_strides_and_skirt(
        self, strides, skirt, ifm_shape, npu_block_type, concat_axis=0, concat_offset=0, split_offset=None, k_height=1
    ):
        new_start_coord = list(self.start_coord)
        new_end_coord = list(self.end_coord)

        new_start_coord[concat_axis] -= concat_offset
        new_end_coord[concat_axis] -= concat_offset

        if split_offset != None:
            for idx in range(len(split_offset)):
                new_start_coord[idx] += split_offset[idx]
                new_end_coord[idx] += split_offset[idx]

        if split_offset == None and npu_block_type in set((NpuBlockType.ConvolutionMxN, NpuBlockType.VectorProduct)):
            # these types of operations do a "dot product" over the entire IFM
            new_start_coord[-1] = 0
            new_end_coord[-1] = ifm_shape[-1]

        if min(len(new_end_coord), len(ifm_shape)) >= 2:
            new_end_coord[-2] = min(new_end_coord[-2], ifm_shape[-2])
        if min(len(new_end_coord), len(ifm_shape)) >= 3:
            new_end_coord[-3] = min(new_end_coord[-3], ifm_shape[-3])

        pad_top = 0
        pad_bottom = 0
        if strides is not None and skirt is not None:
            if len(new_start_coord) >= 2:
                stride = strides[2]
                new_start_coord[-2] = max(new_start_coord[-2] * stride - skirt[1], 0)
                new_end_coord[-2] = min(new_end_coord[-2] * stride + skirt[3], ifm_shape[-2])

            if len(new_start_coord) >= 3:
                stride = strides[1]

                total_stride = stride * (new_end_coord[-3] - new_start_coord[-3] - 1)
                new_start_coord[-3] = new_start_coord[-3] * stride - skirt[0]

                pad_top = max(0, 0 - new_start_coord[-3])
                new_start_coord[-3] = max(new_start_coord[-3], 0)

                while len(ifm_shape) < 3:
                    ifm_shape = [1] + ifm_shape
                if (new_end_coord[-3] * stride + skirt[2]) > ifm_shape[-3]:
                    # pad_bottom is calculated based the diff between the end position of the weight kernel,
                    # after last stride and the ifm height.
                    k_start = new_start_coord[-3] - pad_top
                    pad_bottom = max(0, k_start + total_stride + k_height - ifm_shape[-3])

                new_end_coord[-3] = min(new_end_coord[-3] * stride + skirt[2], ifm_shape[-3])

        return Box(new_start_coord, new_end_coord), pad_top, pad_bottom

    def make_weight_box(weight_shape, npu_block_type, oc_range_start=None, oc_range_end=None, weights_transposed=False):
        start = [0] * len(weight_shape)
        end = list(weight_shape)
        if oc_range_start is not None and oc_range_end is not None:
            if npu_block_type == NpuBlockType.ConvolutionDepthWise:
                # input range is output range divided by channel multiplier
                if weights_transposed:
                    start[-1] = oc_range_start // weight_shape[-2]
                    end[-1] = oc_range_end // weight_shape[-2]
                else:
                    start[-2] = oc_range_start // weight_shape[-1]
                    end[-2] = oc_range_end // weight_shape[-1]
            else:
                start[-1] = oc_range_start
                end[-1] = oc_range_end
        for i in range(len(end)):
            assert 0 <= start[i] < weight_shape[i]
            assert 0 < end[i] <= weight_shape[i]

        return Box(start, end)

    def get_size_shape(self):
        return [int(self.end_coord[i] - self.start_coord[i]) for i in range(len(self.end_coord))]

    def get_size(self):
        return int(np.prod(self.get_size_shape()))

    def __str__(self):
        return "<Box %s - %s>" % (self.start_coord, self.end_coord)

    __repr__ = __str__


class CommandType(IntEnum):
    NpuStripe = 0
    DMA = 1
    Size = 2


class Command:
    def get_ofm_y_range_for_pass(self, ps_requested):
        return None

    def is_npu_pass_command(self):
        return False

    def get_memory_accesses(self):
        return None

    def get_operation_count(self):
        # returns numpy array of (DPU blocks, dma_ops). Should line up with the CommandType enum
        return np.array((0, 0))


class NpuStripe(Command):
    def __init__(
        self,
        ps,
        block_config,
        is_first,
        is_last,
        is_first_h_stripe,
        is_last_h_stripe,
        ifm_tensor,
        ifm_box,
        ofm_tensor,
        ofm_box,
        weight_tensor=None,
        weight_box=None,
        scale_tensor=None,
        concat_axis=0,
        concat_offset=0,
        ifm2_tensor=None,
        ifm2_box=None,
        pad_top=0,
        pad_bottom=0,
    ):
        self.cmdtype = CommandType.NpuStripe
        self.ps = ps
        self.block_config = block_config
        self.is_first = is_first
        self.is_last = is_last
        self.is_first_h_stripe = is_first_h_stripe
        self.is_last_h_stripe = is_last_h_stripe
        self.ifm_tensor = ifm_tensor
        self.ifm_box = ifm_box
        self.ifm2_tensor = ifm2_tensor
        self.ifm2_box = ifm2_box
        self.ofm_tensor = ofm_tensor
        self.ofm_box = ofm_box
        self.weight_tensor = weight_tensor
        self.scale_tensor = scale_tensor
        self.weight_box = weight_box
        self.concat_axis = concat_axis
        self.concat_offset = concat_offset
        self.pad_top = pad_top
        self.pad_bottom = pad_bottom
        for i in range(len(self.ofm_box.end_coord)):
            assert self.ofm_box.end_coord[i] <= self.ofm_tensor.shape[i]

    def get_memory_accesses(self):
        res = MemoryAccessSet()
        if self.ifm_tensor is not None and self.ifm_tensor.shape != []:
            res.add(
                self.ifm_tensor.get_address_ranges_for_coordinates(self.ifm_box.start_coord, self.ifm_box.end_coord),
                AccessDirection.Read,
            )
        if self.ifm2_tensor is not None and self.ifm2_tensor.shape != []:
            res.add(
                self.ifm2_tensor.get_address_ranges_for_coordinates(self.ifm2_box.start_coord, self.ifm2_box.end_coord),
                AccessDirection.Read,
            )
        if self.ofm_tensor is not None:
            res.add(
                self.ofm_tensor.get_address_ranges_for_coordinates(self.ofm_box.start_coord, self.ofm_box.end_coord),
                AccessDirection.Write,
            )
        if self.weight_tensor is not None:
            res.add(
                self.weight_tensor.get_address_ranges_for_coordinates(
                    self.weight_box.start_coord, self.weight_box.end_coord
                ),
                AccessDirection.Read,
            )
        return res

    def is_npu_pass_command(self):
        return True

    def __str__(self):
        return "<NPUStripe: ps=%s, ifm_box=%s, ifm2_box=%s, ofm_box=%s, weight_box=%s, block_config=%s>" % (
            self.ps.name,
            self.ifm_box,
            self.ifm2_box,
            self.ofm_box,
            self.weight_box,
            self.block_config,
        )

    __repr__ = __str__

    def get_ofm_y_range_for_pass(self, ps_requested):
        if ps_requested != self.ps:
            return None
        if len(self.ofm_box.start_coord) >= 3:
            return (self.ofm_box.start_coord[-3], self.ofm_box.end_coord[-3])
        return None

    def get_block_dimensions(self):
        ofm_box = self.ofm_box
        block_config = self.block_config

        out_height = 1
        out_width = 1
        out_depth = ofm_box.end_coord[-1] - ofm_box.start_coord[-1]
        if len(ofm_box.end_coord) >= 4:
            out_width = ofm_box.end_coord[-2] - ofm_box.start_coord[-2]
            out_height = ofm_box.end_coord[-3] - ofm_box.start_coord[-3]

        assert out_height >= 0
        assert out_width >= 0
        assert out_depth >= 0
        return (
            round_up_divide(out_height, block_config[0]),
            round_up_divide(out_width, block_config[1]),
            round_up_divide(out_depth, block_config[3]),
        )

    def get_operation_count(self):
        # returns numpy array of (DPU blocks, dma_ops)
        return np.array((self.get_n_blocks(), 0))

    def get_n_blocks(self):
        h, w, d = self.get_block_dimensions()
        res = h * w * d
        assert res >= 0
        return res

    def get_single_block_command(self, block_idx):
        block_cfg = (self.block_config[0], self.block_config[1], self.block_config[3])
        dims = self.get_block_dimensions()
        strides = dims[1] * dims[2], dims[2], 1
        coord = []
        idx_left = block_idx
        for s in strides:
            c = idx_left // s
            idx_left -= c * s
            coord.append(c)

        assert idx_left == 0

        # put in dummy height/widths in case we're dealing with FC layers
        ofm_start = list(self.ofm_box.start_coord)
        ofm_end = list(self.ofm_box.end_coord)

        # cut out a nice block shape
        for idx in (-1, -2, -3):
            if len(ofm_start) >= -idx:
                ofm_start[idx] += block_cfg[idx] * coord[idx]
                ofm_end[idx] = min(ofm_end[idx], ofm_start[idx] + block_cfg[idx])

        ps = self.ps
        strides = None
        skirt = None
        if ps.primary_op is not None:
            strides = ps.primary_op.attrs.get("strides", None)
            skirt = ps.primary_op.attrs.get("skirt", None)
        npu_block_type = ps.npu_block_type

        ofm_box = Box(ofm_start, ofm_end)
        ifm_box, _, _ = ofm_box.transform_with_strides_and_skirt(
            strides, skirt, self.ifm_tensor.shape, npu_block_type, self.concat_axis, self.concat_offset
        )

        weight_box = None
        if self.weight_tensor is not None:
            weight_oc_start = ofm_start[-1]
            weight_oc_end = ofm_end[-1]
            if self.concat_axis - len(self.weight_tensor.shape) == -1:
                weight_oc_start -= self.concat_offset
                weight_oc_end -= self.concat_offset

            weight_box = Box.make_weight_box(
                self.weight_tensor.shape,
                npu_block_type,
                weight_oc_start,
                weight_oc_end,
                self.weight_tensor.weight_transpose_depthwise,
            )

        return NpuStripe(
            self.ps,
            self.block_config,
            self.is_first,
            self.is_last,
            self.is_first_h_stripe,
            self.is_last_h_stripe,
            self.ifm_tensor,
            ifm_box,
            self.ofm_tensor,
            ofm_box,
            self.weight_tensor,
            weight_box,
            self.scale_tensor,
            self.concat_axis,
            self.concat_offset,
        )


class DMA(Command):
    def __init__(self, in_tensor, out_tensor, box):
        self.cmdtype = CommandType.DMA
        self.in_tensor = in_tensor
        self.out_tensor = out_tensor
        self.box = box

    def __str__(self):
        return "<DMA: in=%s, out=%s, box=%s>" % (self.in_tensor.name, self.out_tensor.name, self.box)

    __repr__ = __str__

    def get_memory_accesses(self):
        res = MemoryAccessSet()

        res.add(
            self.in_tensor.get_address_ranges_for_coordinates(self.box.start_coord, self.box.end_coord),
            AccessDirection.Read,
        )
        res.add(
            self.out_tensor.get_address_ranges_for_coordinates(self.box.start_coord, self.box.end_coord),
            AccessDirection.Write,
        )
        return res

    def get_operation_count(self):
        # returns numpy array of (DPU blocks, dma_ops)
        return np.array((0, 1))