diff --git a/scripts/cmake/platforms/mps3/build_configuration.cmake b/scripts/cmake/platforms/mps3/build_configuration.cmake
new file mode 100644
index 0000000..76c9e78
--- /dev/null
+++ b/scripts/cmake/platforms/mps3/build_configuration.cmake
@@ -0,0 +1,67 @@
+#----------------------------------------------------------------------------
+#  Copyright (c) 2022 Arm Limited. All rights reserved.
+#  SPDX-License-Identifier: Apache-2.0
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#----------------------------------------------------------------------------
+
+function(set_platform_global_defaults)
+    message(STATUS "Platform: MPS3 FPGA Prototyping Board or FVP")
+    if (NOT DEFINED CMAKE_TOOLCHAIN_FILE)
+        set(CMAKE_TOOLCHAIN_FILE ${CMAKE_TOOLCHAIN_DIR}/bare-metal-gcc.cmake
+                CACHE FILEPATH "Toolchain file")
+    endif()
+
+    set(LINKER_SCRIPT_NAME "mps3-${TARGET_SUBSYSTEM}" PARENT_SCOPE)
+    set(PLATFORM_DRIVERS_DIR "${HAL_PLATFORM_DIR}/mps3" PARENT_SCOPE)
+
+endfunction()
+
+function(platform_custom_post_build)
+    set(oneValueArgs TARGET_NAME)
+    cmake_parse_arguments(PARSED "" "${oneValueArgs}" "" ${ARGN} )
+
+    set_target_properties(${PARSED_TARGET_NAME} PROPERTIES SUFFIX ".axf")
+    # Add link options for the linker script to be used:
+    add_linker_script(
+            ${PARSED_TARGET_NAME}          # Target
+            ${CMAKE_SCRIPTS_DIR}/platforms/mps3    # Directory path
+            ${LINKER_SCRIPT_NAME})  # Name of the file without suffix
+
+    add_target_map_file(
+            ${PARSED_TARGET_NAME}
+            ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/${PARSED_TARGET_NAME}.map)
+
+    set(SECTORS_DIR ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/sectors)
+    set(SECTORS_BIN_DIR ${SECTORS_DIR}/${use_case})
+
+    file(REMOVE_RECURSE ${SECTORS_BIN_DIR})
+    file(MAKE_DIRECTORY ${SECTORS_BIN_DIR})
+
+    set(LINKER_SECTION_TAGS     "*.at_itcm" "*.at_ddr")
+    set(LINKER_OUTPUT_BIN_TAGS  "itcm.bin"  "ddr.bin")
+
+    add_bin_generation_command(
+            TARGET_NAME ${PARSED_TARGET_NAME}
+            OUTPUT_DIR  ${SECTORS_BIN_DIR}
+            AXF_PATH    ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/${PARSED_TARGET_NAME}.axf
+            SECTION_PATTERNS    "${LINKER_SECTION_TAGS}"
+            OUTPUT_BIN_NAMES    "${LINKER_OUTPUT_BIN_TAGS}")
+
+    set(MPS3_FPGA_CONFIG "${CMAKE_CURRENT_SOURCE_DIR}/scripts/mps3/${TARGET_SUBSYSTEM}/images.txt")
+
+    add_custom_command(TARGET ${PARSED_TARGET_NAME}
+            POST_BUILD
+            COMMAND ${CMAKE_COMMAND} -E copy ${MPS3_FPGA_CONFIG} ${SECTORS_DIR})
+
+endfunction()
\ No newline at end of file
diff --git a/scripts/cmake/platforms/mps3/mps3-sse-300.ld b/scripts/cmake/platforms/mps3/mps3-sse-300.ld
new file mode 100644
index 0000000..d369fa7
--- /dev/null
+++ b/scripts/cmake/platforms/mps3/mps3-sse-300.ld
@@ -0,0 +1,277 @@
+/*
+ * Copyright (c) 2021 Arm Limited. All rights reserved.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+__STACK_SIZE = 0x00060000;
+__HEAP_SIZE  = 0x000C0000;
+
+/* System memory brief */
+MEMORY
+{
+  ITCM  (rx)  : ORIGIN = 0x00000000, LENGTH = 0x00080000
+  DTCM  (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00080000
+  BRAM  (rwx) : ORIGIN = 0x11000000, LENGTH = 0x00100000
+  SRAM  (rwx) : ORIGIN = 0x31000000, LENGTH = 0x00200000
+  DDR   (rwx) : ORIGIN = 0x70000000, LENGTH = 0x02000000
+
+  /* Dynamic load regions declared for use by FVP only
+   * These regions are mentioned in the CMake subsystem profile.
+   * Do not change the addresses here in isolation. */
+  DDR_dynamic_model (rx) : ORIGIN = 0x90000000, LENGTH = 0x02000000
+  DDR_dynamic_ifm   (rx) : ORIGIN = 0x92000000, LENGTH = 0x01000000
+  DDR_dynamic_ofm   (rx) : ORIGIN = 0x93000000, LENGTH = 0x01000000
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions ITCM and RAM.
+ * It references following symbols, which must be defined in code:
+ *   Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __copy_table_start__
+ *   __copy_table_end__
+ *   __zero_table_start__
+ *   __zero_table_end__
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __end__
+ *   end
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+  .text.at_itcm :
+  {
+    KEEP(*(.vectors))
+
+    /**
+     * All code goes here, with one exception of
+     * all_ops_resolver object file. This code
+     * instead placed on BRAM. See comment in the
+     * BRAM section for details.
+     **/
+    *(EXCLUDE_FILE(*all_ops_resolver.o *hal.c.obj) .text*)
+
+    KEEP(*(.init))
+    KEEP(*(.fini))
+
+    /* .ctors */
+    *crtbegin.o(.ctors)
+    *crtbegin?.o(.ctors)
+    *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+    *(SORT(.ctors.*))
+    *(.ctors)
+
+    /* .dtors */
+    *crtbegin.o(.dtors)
+    *crtbegin?.o(.dtors)
+    *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+    *(SORT(.dtors.*))
+    *(.dtors)
+
+    KEEP(*(.eh_frame*))
+  } > ITCM
+
+  __exidx_start = .;
+  .ARM.exidx.at_itcm :
+  {
+    *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+  } > ITCM
+  __exidx_end = .;
+
+  .zero.table.at_itcm :
+  {
+    . = ALIGN(4);
+    __zero_table_start__ = .;
+
+    LONG (__bss_start__)
+    LONG ((__bss_end__ - __bss_start__)/4) /* Size is in 32-bit words */
+
+    __zero_table_end__ = .;
+  } > ITCM
+
+  .copy.table.at_itcm :
+  {
+    . = ALIGN(4);
+    __copy_table_start__ = .;
+
+    /* Section to be copied - part 1: any data to be placed in BRAM */
+    LONG (__etext)
+    LONG (__data_start__)
+    LONG ((__data_end__ - __data_start__)/4) /* Size is in 32-bit words */
+
+    /* Section to be copied - part 2: RO data for for DTCM */
+    LONG (__etext2)
+    LONG (__ro_data_start__)
+    LONG ((__ro_data_end__ - __ro_data_start__)/4) /* Size is in 32-bit words */
+
+    __copy_table_end__ = .;
+  } > ITCM
+
+  __itcm_total = ALIGN(4);
+
+  ASSERT( __itcm_total < (ORIGIN(ITCM) + LENGTH(ITCM)), "ITCM overflow")
+
+  .sram :
+  {
+    . = ALIGN(16);
+    /* Cache area (if used) */
+    *(.bss.NoInit.ethos_u_cache)
+    . = ALIGN (16);
+    /* activation buffers a.k.a tensor arena when memory mode sram only or shared sram */
+    *(.bss.NoInit.activation_buf_sram)
+    . = ALIGN(16);
+  } > SRAM AT > SRAM
+
+  .bss :
+  {
+    . = ALIGN(4);
+    __bss_start__ = .;
+    *(.bss)
+    *(.bss.*)
+    *(COMMON)
+    . = ALIGN(4);
+    __bss_end__ = .;
+  } > DTCM AT > DTCM
+
+  .stack (ORIGIN(DTCM) + LENGTH(DTCM) - __STACK_SIZE) (COPY) :
+  {
+    . = ALIGN(8);
+    __StackLimit = .;
+    . = . + __STACK_SIZE;
+    . = ALIGN(8);
+    __StackTop = .;
+  } > DTCM
+  PROVIDE(__stack = __StackTop);
+  ASSERT(
+    (__STACK_SIZE + __bss_end__ - __bss_start__) <= LENGTH(DTCM),
+    "DTCM overflow")
+
+  .ddr.at_ddr :
+  {
+    /* __attribute__((aligned(16))) is not handled by the CMSIS startup code.
+     * Force the alignment here as a workaround */
+    . = ALIGN(16);
+    /* nn model's baked in input matrices */
+    *(ifm)
+    . = ALIGN(16);
+    /* nn model's default space */
+    *(nn_model)
+    . = ALIGN (16);
+    /* labels */
+    *(labels)
+    . = ALIGN (16);
+    /* activation buffers a.k.a tensor arena when memory mode dedicated sram */
+    *(activation_buf_dram)
+    . = ALIGN (16);
+  } > DDR AT > DDR
+
+  /**
+   * Location counter can end up 2byte aligned with narrow Thumb code but
+   * __etext is assumed by startup code to be the LMA of a section in DTCM
+   * which must be 4byte aligned
+   */
+  __etext = ALIGN (4);
+
+  .bram.at_ddr :  AT (__etext)
+  {
+    __data_start__ = .;
+    *(vtable)
+    *(.data)
+    *(.data.*)
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP(*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP(*(SORT(.init_array.*)))
+    KEEP(*(.init_array))
+    PROVIDE_HIDDEN (__init_array_end = .);
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP(*(SORT(.fini_array.*)))
+    KEEP(*(.fini_array))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+    KEEP(*(.jcr*))
+    . = ALIGN(4);
+
+    *(.ARM.extab* .gnu.linkonce.armextab.*)
+    . = ALIGN(4);
+
+    /**
+     * Place the all ops resolver code data here. This accounts
+     * for ~4k worth of saving on the ITCM load region. It is
+     * only designed to be included (by default) for the inference
+     * runner use case.
+     **/
+    *all_ops_resolver.o (*.text*)
+    . = ALIGN(4);
+    *hal.c.obj (*.text*)
+    . = ALIGN(4);
+
+    __data_end__ = .;
+  } > BRAM
+
+  __etext2 = __etext + (__data_end__ - __data_start__);
+
+  .data.at_ddr : AT (__etext2)
+  {
+    . = ALIGN(4);
+    __ro_data_start__ = .;
+
+    *(.rodata*)
+    . = ALIGN(4);
+    * (npu_driver_version)
+    . = ALIGN(4);
+    * (npu_driver_arch_version)
+    . = ALIGN(4);
+
+    __ro_data_end__ = .;
+  } > BRAM
+
+  .heap (COPY) :
+  {
+    . = ALIGN(8);
+    __end__ = .;
+    PROVIDE(end = .);
+    . = . + __HEAP_SIZE;
+    . = ALIGN(8);
+    __HeapLimit = .;
+  } > BRAM
+
+  ASSERT (
+      (__ro_data_end__ - __ro_data_start__)
+    + (__data_end__  - __data_start__)
+    + __HEAP_SIZE <= LENGTH(BRAM),
+    "BRAM overflow")
+}
diff --git a/scripts/cmake/platforms/mps3/mps3-sse-300.sct b/scripts/cmake/platforms/mps3/mps3-sse-300.sct
new file mode 100644
index 0000000..f78dc25
--- /dev/null
+++ b/scripts/cmake/platforms/mps3/mps3-sse-300.sct
@@ -0,0 +1,145 @@
+;  Copyright (c) 2021 Arm Limited. All rights reserved.
+;  SPDX-License-Identifier: Apache-2.0
+;
+;  Licensed under the Apache License, Version 2.0 (the "License");
+;  you may not use this file except in compliance with the License.
+;  You may obtain a copy of the License at
+;
+;      http://www.apache.org/licenses/LICENSE-2.0
+;
+;  Unless required by applicable law or agreed to in writing, software
+;  distributed under the License is distributed on an "AS IS" BASIS,
+;  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;  See the License for the specific language governing permissions and
+;  limitations under the License.
+
+; *************************************************************
+; ***       Scatter-Loading Description File                ***
+; *************************************************************
+; Please see docs/sections/appendix.md for memory mapping information.
+;
+; Note: Ethos-U NPU can access BRAM, internal SRAM and the DDR sections => activation buffers and
+;       the model should only be placed in those regions.
+;
+;---------------------------------------------------------
+; First load region (ITCM)
+;---------------------------------------------------------
+LOAD_REGION_0       0x00000000                  0x00080000
+{
+    ;-----------------------------------------------------
+    ; First part of code mem - 512kiB
+    ;-----------------------------------------------------
+    itcm.bin        0x00000000                  0x00080000
+    {
+        *.o (RESET, +First)
+        * (InRoot$$Sections)
+
+        ; Essentially only RO-CODE, RO-DATA is in a
+        ; different region.
+        .ANY (+RO)
+    }
+
+    ;-----------------------------------------------------
+    ; 128kiB of 512kiB DTCM is used for any other RW or ZI
+    ; data. Note: this region is internal to the Cortex-M
+    ; CPU.
+    ;-----------------------------------------------------
+    dtcm.bin        0x20000000                  0x00020000
+    {
+        ; Any R/W and/or zero initialised data
+        .ANY(+RW +ZI)
+    }
+
+    ;-----------------------------------------------------
+    ; 384kiB of stack space within the DTCM region. See
+    ; `dtcm.bin` for the first section. Note: by virtue of
+    ; being part of DTCM, this region is only accessible
+    ; from Cortex-M55.
+    ;-----------------------------------------------------
+    ARM_LIB_STACK   0x20020000 EMPTY ALIGN 8    0x00060000
+    {}
+
+    ;-----------------------------------------------------
+    ; FPGA internal SRAM of 2MiB - reserved for activation
+    ; buffers.
+    ; This region should have 3 cycle read latency from
+    ; both Cortex-M55 and Ethos-U NPU
+    ;-----------------------------------------------------
+    isram.bin       0x31000000  UNINIT ALIGN 16 0x00200000
+    {
+        ; Cache area (if used)
+        *.o (.bss.NoInit.ethos_u_cache)
+
+        ; activation buffers a.k.a tensor arena when
+        ; memory mode sram only or shared sram
+        *.o (.bss.NoInit.activation_buf_sram)
+    }
+}
+
+;---------------------------------------------------------
+; Second load region (DDR)
+;---------------------------------------------------------
+LOAD_REGION_1       0x70000000                  0x02000000
+{
+    ;-----------------------------------------------------
+    ; 32 MiB of DDR space for neural network model,
+    ; input vectors and labels. If the activation buffer
+    ; size required by the network is bigger than the
+    ; SRAM size available, it is accommodated here.
+    ;-----------------------------------------------------
+    ddr.bin        0x70000000 ALIGN 16         0x02000000
+    {
+        ; nn model's baked in input matrices
+        *.o (ifm)
+
+        ; nn model's default space
+        *.o (nn_model)
+
+        ; labels
+        *.o (labels)
+
+        ; activation buffers a.k.a tensor arena when memory mode dedicated sram
+        *.o (activation_buf_dram)
+    }
+
+    ;-----------------------------------------------------
+    ; First 256kiB of BRAM (FPGA SRAM) used for RO data.
+    ; Note: Total BRAM size available is 1MiB.
+    ;-----------------------------------------------------
+    bram.bin        0x11000000          ALIGN 8 0x00040000
+    {
+        ; RO data (incl. unwinding tables for debugging)
+        .ANY (+RO-DATA)
+    }
+
+    ;-----------------------------------------------------
+    ; 768 KiB of remaining part of the 1MiB BRAM used as
+    ; heap space.
+    ;-----------------------------------------------------
+    ARM_LIB_HEAP    0x11040000 EMPTY ALIGN 8    0x000C0000
+    {}
+
+    ;-----------------------------------------------------
+    ; The following regions are for use by the FVP to
+    ; allow loading or dumping of dynamic data into or
+    ; from the memory. These regions are mentioned in
+    ; the CMake subsystem profile. Do not change the
+    ; addresses and sizes below in isolation.
+    ;-----------------------------------------------------
+    ; 32 MiB of model space for run-time load of model
+    ;-----------------------------------------------------
+    runtime_model   0x90000000 EMPTY ALIGN 16   0x02000000
+    {}
+
+    ;-----------------------------------------------------
+    ; 16 MiB of IFM space for run-time loading (FVP only)
+    ;-----------------------------------------------------
+    runtime_ifm     0x92000000 EMPTY ALIGN 16   0x01000000
+    {}
+
+    ;-----------------------------------------------------
+    ; 16 MiB of OFM space for run-time loading (FVP only)
+    ;-----------------------------------------------------
+    runtime_ofm     0x93000000 EMPTY ALIGN 16   0x01000000
+    {}
+}
diff --git a/scripts/cmake/platforms/native/build_configuration.cmake b/scripts/cmake/platforms/native/build_configuration.cmake
new file mode 100644
index 0000000..c87ac89
--- /dev/null
+++ b/scripts/cmake/platforms/native/build_configuration.cmake
@@ -0,0 +1,113 @@
+#----------------------------------------------------------------------------
+#  Copyright (c) 2022 Arm Limited. All rights reserved.
+#  SPDX-License-Identifier: Apache-2.0
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#----------------------------------------------------------------------------
+
+set(TEST_TPIP ${DOWNLOAD_DEP_DIR}/test)
+
+file(MAKE_DIRECTORY ${TEST_TPIP})
+set(TEST_TPIP_INCLUDE ${TEST_TPIP}/include)
+file(MAKE_DIRECTORY ${TEST_TPIP_INCLUDE})
+
+ExternalProject_Add(catch2-headers
+        URL https://github.com/catchorg/Catch2/releases/download/v2.11.1/catch.hpp
+        DOWNLOAD_NO_EXTRACT 1
+        CONFIGURE_COMMAND ""
+        BUILD_COMMAND bash -c "cp -R <DOWNLOAD_DIR>/catch.hpp ${TEST_TPIP_INCLUDE}"
+        INSTALL_COMMAND "")
+
+function(set_platform_global_defaults)
+    message(STATUS "Platform: Native (Linux based x86_64/aarch64 system)")
+    if (NOT DEFINED CMAKE_TOOLCHAIN_FILE)
+        set(CMAKE_TOOLCHAIN_FILE ${CMAKE_TOOLCHAIN_DIR}/native-gcc.cmake
+                CACHE FILEPATH "Toolchain file")
+    endif()
+
+endfunction()
+
+function(platform_custom_post_build)
+    set(oneValueArgs TARGET_NAME)
+    cmake_parse_arguments(PARSED "" "${oneValueArgs}" "" ${ARGN} )
+
+
+    # If native build tests
+    set(TEST_SRC_USE_CASE "")
+    foreach(USE_CASES_TESTS_SEARCH_DIR ${USE_CASES_TESTS_SEARCH_DIR_LIST})
+
+        if (EXISTS ${USE_CASES_TESTS_SEARCH_DIR}/${use_case})
+            message(STATUS "Found tests for use-case ${use_case} at ${USE_CASES_TESTS_SEARCH_DIR}/${use_case}.")
+            set(TEST_SRC_USE_CASE ${USE_CASES_TESTS_SEARCH_DIR})
+            break()
+        endif ()
+    endforeach()
+
+    # Add tests only if they exists for the usecase
+    if (NOT ${TEST_SRC_USE_CASE} STREQUAL "")
+
+        set(TEST_RESOURCES_INCLUDE
+                "${TEST_SRCS}/utils/"
+                "${TEST_SRC_USE_CASE}/${use_case}/include/"
+                )
+
+        # Define Test sources and new target to run unit tests
+        file(GLOB_RECURSE TEST_SOURCES
+                "${TEST_SRCS}/common/*.cpp"
+                "${TEST_SRCS}/common/*.cc"
+                "${TEST_SRCS}/utils/*.cc"
+                "${TEST_SRCS}/utils/*.cpp"
+                "${TEST_SRC_USE_CASE}/${use_case}/*.cpp"
+                "${TEST_SRC_USE_CASE}/${use_case}/*.cc"
+                "${TEST_SRC_USE_CASE}/${use_case}/*.c"
+                "${TEST_SRC_USE_CASE}/${use_case}/**/*.cpp"
+                "${TEST_SRC_USE_CASE}/${use_case}/**/*.cc"
+                "${TEST_SRC_USE_CASE}/${use_case}/**/*.c"
+                )
+
+        set(TEST_SRC_GEN_DIR ${CMAKE_BINARY_DIR}/generated/${use_case}/tests/src)
+        set(TEST_INC_GEN_DIR ${CMAKE_BINARY_DIR}/generated/${use_case}/tests/include)
+        file(MAKE_DIRECTORY ${TEST_SRC_GEN_DIR} ${TEST_INC_GEN_DIR})
+
+        set(${use_case}_DEFAULT_TEST_DATA_DIR ${DEFAULT_TEST_DATA_DIR} CACHE PATH "")
+        # Generate test data files to be included in x86 tests
+        generate_test_data_code(
+                INPUT_DIR "${${use_case}_DEFAULT_TEST_DATA_DIR}"
+                DESTINATION_SRC ${TEST_SRC_GEN_DIR}
+                DESTINATION_HDR ${TEST_INC_GEN_DIR}
+                NAMESPACE "test"
+        )
+
+        file(GLOB_RECURSE TEST_SOURCES_GEN
+                "${TEST_SRC_GEN_DIR}/*.cc"
+                "${TEST_SRC_GEN_DIR}/**/*.cc"
+                )
+        message(STATUS "Adding ${TEST_SOURCES_GEN} to test sources")
+        list(APPEND TEST_SOURCES ${TEST_SOURCES_GEN})
+        list(APPEND TEST_RESOURCES_INCLUDE ${TEST_INC_GEN_DIR})
+
+        set(TEST_TARGET_NAME "${CMAKE_PROJECT_NAME}-${use_case}-tests")
+        add_executable(${TEST_TARGET_NAME} ${TEST_SOURCES})
+        target_include_directories(${TEST_TARGET_NAME} PUBLIC
+                ${TEST_TPIP_INCLUDE} ${TEST_RESOURCES_INCLUDE})
+        target_link_libraries(${TEST_TARGET_NAME} PUBLIC ${UC_LIB_NAME})
+        target_compile_definitions(${TEST_TARGET_NAME} PRIVATE
+                "ACTIVATION_BUF_SZ=${${use_case}_ACTIVATION_BUF_SZ}"
+                TESTS)
+
+        add_dependencies(
+                "${TEST_TARGET_NAME}"
+                "catch2-headers"
+        )
+    endif ()
+endfunction()
\ No newline at end of file
diff --git a/scripts/cmake/platforms/simple_platform/build_configuration.cmake b/scripts/cmake/platforms/simple_platform/build_configuration.cmake
new file mode 100644
index 0000000..3d46884
--- /dev/null
+++ b/scripts/cmake/platforms/simple_platform/build_configuration.cmake
@@ -0,0 +1,59 @@
+#----------------------------------------------------------------------------
+#  Copyright (c) 2022 Arm Limited. All rights reserved.
+#  SPDX-License-Identifier: Apache-2.0
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#----------------------------------------------------------------------------
+
+function(set_platform_global_defaults)
+    message(STATUS "Platform: Simple platform with minimal peripherals")
+    if (NOT DEFINED CMAKE_TOOLCHAIN_FILE)
+        set(CMAKE_TOOLCHAIN_FILE ${CMAKE_TOOLCHAIN_DIR}/bare-metal-gcc.cmake
+                CACHE FILEPATH "Toolchain file")
+    endif()
+    set(LINKER_SCRIPT_NAME  "simple_platform" PARENT_SCOPE)
+    set(PLATFORM_DRIVERS_DIR "${HAL_PLATFORM_DIR}/simple" PARENT_SCOPE)
+endfunction()
+
+function(platform_custom_post_build)
+    set(oneValueArgs TARGET_NAME)
+    cmake_parse_arguments(PARSED "" "${oneValueArgs}" "" ${ARGN} )
+
+    set_target_properties(${PARSED_TARGET_NAME} PROPERTIES SUFFIX ".axf")
+    # Add link options for the linker script to be used:
+
+    add_linker_script(
+        ${PARSED_TARGET_NAME}          # Target
+        ${CMAKE_SCRIPTS_DIR}/platforms/simple_platform    # Directory path
+        ${LINKER_SCRIPT_NAME})  # Name of the file without suffix
+
+    add_target_map_file(
+        ${PARSED_TARGET_NAME}
+        ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/${PARSED_TARGET_NAME}.map)
+
+    set(SECTORS_DIR ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/sectors)
+    set(SECTORS_BIN_DIR ${SECTORS_DIR}/${use_case})
+
+    file(REMOVE_RECURSE ${SECTORS_BIN_DIR})
+    file(MAKE_DIRECTORY ${SECTORS_BIN_DIR})
+
+    set(LINKER_SECTION_TAGS     "*.at_itcm" "*.at_ddr")
+    set(LINKER_OUTPUT_BIN_TAGS  "itcm.bin"  "ddr.bin")
+
+    add_bin_generation_command(
+        TARGET_NAME ${PARSED_TARGET_NAME}
+        OUTPUT_DIR  ${SECTORS_BIN_DIR}
+        AXF_PATH    ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/${PARSED_TARGET_NAME}.axf
+        SECTION_PATTERNS    "${LINKER_SECTION_TAGS}"
+        OUTPUT_BIN_NAMES    "${LINKER_OUTPUT_BIN_TAGS}")
+endfunction()
\ No newline at end of file
diff --git a/scripts/cmake/platforms/simple_platform/simple_platform.ld b/scripts/cmake/platforms/simple_platform/simple_platform.ld
new file mode 100644
index 0000000..82cb18e
--- /dev/null
+++ b/scripts/cmake/platforms/simple_platform/simple_platform.ld
@@ -0,0 +1,270 @@
+/*
+ * Copyright (c) 2021 Arm Limited. All rights reserved.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+__STACK_SIZE = 0x00060000;
+__HEAP_SIZE  = 0x000C0000;
+
+/* System memory brief */
+MEMORY
+{
+  ITCM  (rx)  : ORIGIN = 0x00000000, LENGTH = 0x00080000
+  DTCM  (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00080000
+  BRAM  (rwx) : ORIGIN = 0x11000000, LENGTH = 0x00100000
+  SRAM  (rwx) : ORIGIN = 0x31000000, LENGTH = 0x00200000
+  DDR   (rwx) : ORIGIN = 0x70000000, LENGTH = 0x02000000
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions ITCM and RAM.
+ * It references following symbols, which must be defined in code:
+ *   Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __copy_table_start__
+ *   __copy_table_end__
+ *   __zero_table_start__
+ *   __zero_table_end__
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __end__
+ *   end
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+  .text.at_itcm :
+  {
+    KEEP(*(.vectors))
+
+    /**
+     * All code goes here, with one exception of
+     * all_ops_resolver object file. This code
+     * instead placed on BRAM. See comment in the
+     * BRAM section for details.
+     **/
+    *(EXCLUDE_FILE(*all_ops_resolver.o *hal.c.obj) .text*)
+
+    KEEP(*(.init))
+    KEEP(*(.fini))
+
+    /* .ctors */
+    *crtbegin.o(.ctors)
+    *crtbegin?.o(.ctors)
+    *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+    *(SORT(.ctors.*))
+    *(.ctors)
+
+    /* .dtors */
+    *crtbegin.o(.dtors)
+    *crtbegin?.o(.dtors)
+    *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+    *(SORT(.dtors.*))
+    *(.dtors)
+
+    KEEP(*(.eh_frame*))
+  } > ITCM
+
+  __exidx_start = .;
+  .ARM.exidx.at_itcm :
+  {
+    *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+  } > ITCM
+  __exidx_end = .;
+
+  .zero.table.at_itcm :
+  {
+    . = ALIGN(4);
+    __zero_table_start__ = .;
+
+    LONG (__bss_start__)
+    LONG ((__bss_end__ - __bss_start__)/4) /* Size is in 32-bit words */
+
+    __zero_table_end__ = .;
+  } > ITCM
+
+  .copy.table.at_itcm :
+  {
+    . = ALIGN(4);
+    __copy_table_start__ = .;
+
+    /* Section to be copied - part 1: any data to be placed in BRAM */
+    LONG (__etext)
+    LONG (__data_start__)
+    LONG ((__data_end__ - __data_start__)/4) /* Size is in 32-bit words */
+
+    /* Section to be copied - part 2: RO data for for DTCM */
+    LONG (__etext2)
+    LONG (__ro_data_start__)
+    LONG ((__ro_data_end__ - __ro_data_start__)/4) /* Size is in 32-bit words */
+
+    __copy_table_end__ = .;
+  } > ITCM
+
+  __itcm_total = ALIGN(4);
+
+  ASSERT( __itcm_total < (ORIGIN(ITCM) + LENGTH(ITCM)), "ITCM overflow")
+
+  .sram :
+  {
+    . = ALIGN(16);
+    /* Cache area (if used) */
+    *(.bss.NoInit.ethos_u_cache)
+    . = ALIGN (16);
+    /* activation buffers a.k.a tensor arena when memory mode sram only or shared sram */
+    *(.bss.NoInit.activation_buf_sram)
+    . = ALIGN(16);
+  } > SRAM AT > SRAM
+
+  .bss :
+  {
+    . = ALIGN(4);
+    __bss_start__ = .;
+    *(.bss)
+    *(.bss.*)
+    *(COMMON)
+    . = ALIGN(4);
+    __bss_end__ = .;
+  } > DTCM AT > DTCM
+
+  .stack (ORIGIN(DTCM) + LENGTH(DTCM) - __STACK_SIZE) (COPY) :
+  {
+    . = ALIGN(8);
+    __StackLimit = .;
+    . = . + __STACK_SIZE;
+    . = ALIGN(8);
+    __StackTop = .;
+  } > DTCM
+  PROVIDE(__stack = __StackTop);
+  ASSERT(
+    (__STACK_SIZE + __bss_end__ - __bss_start__) <= LENGTH(DTCM),
+    "DTCM overflow")
+
+  .ddr.at_ddr :
+  {
+    /* __attribute__((aligned(16))) is not handled by the CMSIS startup code.
+     * Force the alignment here as a workaround */
+    . = ALIGN(16);
+    /* nn model's baked in input matrices */
+    *(ifm)
+    . = ALIGN(16);
+    /* nn model's default space */
+    *(nn_model)
+    . = ALIGN (16);
+    /* labels */
+    *(labels)
+    . = ALIGN (16);
+    /* activation buffers a.k.a tensor arena when memory mode dedicated sram */
+    *(activation_buf_dram)
+    . = ALIGN (16);
+  } > DDR AT > DDR
+
+  /**
+   * Location counter can end up 2byte aligned with narrow Thumb code but
+   * __etext is assumed by startup code to be the LMA of a section in DTCM
+   * which must be 4byte aligned
+   */
+  __etext = ALIGN (4);
+
+  .bram.at_ddr :  AT (__etext)
+  {
+    __data_start__ = .;
+    *(vtable)
+    *(.data)
+    *(.data.*)
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP(*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP(*(SORT(.init_array.*)))
+    KEEP(*(.init_array))
+    PROVIDE_HIDDEN (__init_array_end = .);
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP(*(SORT(.fini_array.*)))
+    KEEP(*(.fini_array))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+    KEEP(*(.jcr*))
+    . = ALIGN(4);
+
+    *(.ARM.extab* .gnu.linkonce.armextab.*)
+    . = ALIGN(4);
+
+    /**
+     * Place the all ops resolver code data here. This accounts
+     * for ~4k worth of saving on the ITCM load region. It is
+     * only designed to be included (by default) for the inference
+     * runner use case.
+     **/
+    *all_ops_resolver.o (*.text*)
+    . = ALIGN(4);
+    *hal.c.obj (*.text*)
+    . = ALIGN(4);
+
+    __data_end__ = .;
+  } > BRAM
+
+  __etext2 = __etext + (__data_end__ - __data_start__);
+
+  .data.at_ddr : AT (__etext2)
+  {
+    . = ALIGN(4);
+    __ro_data_start__ = .;
+
+    *(.rodata*)
+    . = ALIGN(4);
+    * (npu_driver_version)
+    . = ALIGN(4);
+    * (npu_driver_arch_version)
+    . = ALIGN(4);
+
+    __ro_data_end__ = .;
+  } > BRAM
+
+  .heap (COPY) :
+  {
+    . = ALIGN(8);
+    __end__ = .;
+    PROVIDE(end = .);
+    . = . + __HEAP_SIZE;
+    . = ALIGN(8);
+    __HeapLimit = .;
+  } > BRAM
+
+  ASSERT (
+      (__ro_data_end__ - __ro_data_start__)
+    + (__data_end__  - __data_start__)
+    + __HEAP_SIZE <= LENGTH(BRAM),
+    "BRAM overflow")
+}
diff --git a/scripts/cmake/platforms/simple_platform/simple_platform.sct b/scripts/cmake/platforms/simple_platform/simple_platform.sct
new file mode 100644
index 0000000..5825d47
--- /dev/null
+++ b/scripts/cmake/platforms/simple_platform/simple_platform.sct
@@ -0,0 +1,122 @@
+;  Copyright (c) 2021 Arm Limited. All rights reserved.
+;  SPDX-License-Identifier: Apache-2.0
+;
+;  Licensed under the Apache License, Version 2.0 (the "License");
+;  you may not use this file except in compliance with the License.
+;  You may obtain a copy of the License at
+;
+;      http://www.apache.org/licenses/LICENSE-2.0
+;
+;  Unless required by applicable law or agreed to in writing, software
+;  distributed under the License is distributed on an "AS IS" BASIS,
+;  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;  See the License for the specific language governing permissions and
+;  limitations under the License.
+
+; *************************************************************
+; ***       Scatter-Loading Description File                ***
+; *************************************************************
+; Please see docs/sections/appendix.md for memory mapping information.
+;
+; Note: Ethos-U NPU can access BRAM, internal SRAM and the DDR
+;       sections => activation buffers and the model should only
+;       be placed in those regions.
+;
+;---------------------------------------------------------
+; First load region (ITCM)
+;---------------------------------------------------------
+LOAD_REGION_0       0x00000000                  0x00080000
+{
+    ;-----------------------------------------------------
+    ; First part of code mem - 512kiB
+    ;-----------------------------------------------------
+    itcm.bin        0x00000000                  0x00080000
+    {
+        *.o (RESET, +First)
+        * (InRoot$$Sections)
+
+        ; Essentially only RO-CODE, RO-DATA is in a
+        ; different region.
+        .ANY (+RO)
+    }
+
+    ;-----------------------------------------------------
+    ; 128kiB of 512kiB DTCM is used for any other RW or ZI
+    ; data. Note: this region is internal to the Cortex-M
+    ; CPU.
+    ;-----------------------------------------------------
+    dtcm.bin        0x20000000                  0x00020000
+    {
+        ; Any R/W and/or zero initialised data
+        .ANY(+RW +ZI)
+    }
+
+    ;-----------------------------------------------------
+    ; 384kiB of stack space within the DTCM region. See
+    ; `dtcm.bin` for the first section. Note: by virtue of
+    ; being part of DTCM, this region is only accessible
+    ; from Cortex-M55.
+    ;-----------------------------------------------------
+    ARM_LIB_STACK   0x20020000 EMPTY ALIGN 8    0x00060000
+    {}
+
+    ;-----------------------------------------------------
+    ; SSE-300's internal SRAM of 2MiB - reserved for
+    ; activation buffers.
+    ; This region should have 3 cycle read latency from
+    ; both Cortex-M55 and Ethos-U NPU
+    ;-----------------------------------------------------
+    isram.bin       0x31000000  UNINIT ALIGN 16 0x00200000
+    {
+        ; Cache area (if used)
+        *.o (.bss.NoInit.ethos_u_cache)
+
+        ; activation buffers a.k.a tensor arena when
+        ; memory mode sram only or shared sram
+        *.o (.bss.NoInit.activation_buf_sram)
+    }
+}
+
+;---------------------------------------------------------
+; Second load region (DDR)
+;---------------------------------------------------------
+LOAD_REGION_1       0x70000000                  0x02000000
+{
+    ;-----------------------------------------------------
+    ; 32 MiB of DDR space for neural network model,
+    ; input vectors and labels. If the activation buffer
+    ; size required by the network is bigger than the
+    ; SRAM size available, it is accommodated here.
+    ;-----------------------------------------------------
+    ddr.bin        0x70000000 ALIGN 16         0x02000000
+    {
+        ; nn model's baked in input matrices
+        *.o (ifm)
+
+        ; nn model's default space
+        *.o (nn_model)
+
+        ; labels
+        *.o (labels)
+
+        ; activation buffers a.k.a tensor arena when memory mode dedicated sram
+        *.o (activation_buf_dram)
+    }
+
+    ;-----------------------------------------------------
+    ; First 256kiB of BRAM (FPGA SRAM) used for RO data.
+    ; Note: Total BRAM size available is 1MiB.
+    ;-----------------------------------------------------
+    bram.bin        0x11000000          ALIGN 8 0x00040000
+    {
+        ; RO data (incl. unwinding tables for debugging)
+        .ANY (+RO-DATA)
+    }
+
+    ;-----------------------------------------------------
+    ; 768 KiB of remaining part of the 1MiB BRAM used as
+    ; heap space.
+    ;-----------------------------------------------------
+    ARM_LIB_HEAP    0x11040000 EMPTY ALIGN 8    0x000C0000
+    {}
+}