MLECO-2682: CMake and source refactoring.

MLECO-2930: logging macros were extracted from hal.h and used separately around the code.

MLECO-2931: arm_math lib introduced, cmsis-dsp removed from top level linkage.

MLECO-2915: platform related post-build steps.

Change-Id: Id718884e22f262a5c070ded3f3f5d4b048820147
Signed-off-by: alexander <alexander.efremov@arm.com>
diff --git a/source/hal/platform/mps3/CMakeLists.txt b/source/hal/platform/mps3/CMakeLists.txt
new file mode 100644
index 0000000..ad510ee
--- /dev/null
+++ b/source/hal/platform/mps3/CMakeLists.txt
@@ -0,0 +1,114 @@
+#----------------------------------------------------------------------------
+#  Copyright (c) 2022 Arm Limited. All rights reserved.
+#  SPDX-License-Identifier: Apache-2.0
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#----------------------------------------------------------------------------
+
+#########################################################
+#           MPS3 platform support library               #
+#########################################################
+
+cmake_minimum_required(VERSION 3.15.6)
+set(PLATFORM_DRIVERS_TARGET platform-drivers)
+project(${PLATFORM_DRIVERS_TARGET}
+    DESCRIPTION     "Platform drivers library for MPS3 FPGA/FVP targets"
+    LANGUAGES       C CXX ASM)
+
+# 1. We should be cross-compiling (MPS3 taregt only runs Cortex-M targets)
+if (NOT ${CMAKE_CROSSCOMPILING})
+    message(FATAL_ERROR "No ${PLATFORM_DRIVERS_TARGET} support for this target.")
+endif()
+
+# 2. Set the platform cmake descriptor file
+if (NOT DEFINED PLATFORM_CMAKE_DESCRIPTOR_FILE)
+    set(PLATFORM_CMAKE_DESCRIPTOR_FILE
+        cmake/subsystem-profiles/corstone-sse-300.cmake
+        CACHE PATH
+        "Platform's CMake descriptor file path")
+endif()
+
+## Include the platform cmake descriptor file
+include(${PLATFORM_CMAKE_DESCRIPTOR_FILE})
+
+# 3. Generate sources:
+if (NOT DEFINED SOURCE_GEN_DIR)
+    set(SOURCE_GEN_DIR ${CMAKE_BINARY_DIR}/generated/bsp)
+endif()
+
+set(MEM_PROFILE_TEMPLATE ${CMAKE_CURRENT_SOURCE_DIR}/cmake/templates/peripheral_memmap.h.template)
+set(IRQ_PROFILE_TEMPLATE ${CMAKE_CURRENT_SOURCE_DIR}/cmake/templates/peripheral_irqs.h.template)
+set(MEM_REGIONS_TEMPLATE ${CMAKE_CURRENT_SOURCE_DIR}/cmake/templates/mem_regions.h.template)
+
+configure_file("${MEM_PROFILE_TEMPLATE}" "${SOURCE_GEN_DIR}/peripheral_memmap.h")
+configure_file("${IRQ_PROFILE_TEMPLATE}" "${SOURCE_GEN_DIR}/peripheral_irqs.h")
+configure_file("${MEM_REGIONS_TEMPLATE}" "${SOURCE_GEN_DIR}/mem_regions.h")
+
+# If a TA config file is provided, we generate a settings file
+if (DEFINED TA_CONFIG_FILE)
+    include(${TA_CONFIG_FILE})
+    set(TA_SETTINGS_TEMPLATE ${CMAKE_CURRENT_SOURCE_DIR}/cmake/templates/timing_adapter_settings.template)
+    configure_file("${TA_SETTINGS_TEMPLATE}" "${SOURCE_GEN_DIR}/timing_adapter_settings.h")
+endif()
+
+# 4. Create static library
+add_library(${PLATFORM_DRIVERS_TARGET} STATIC)
+
+## Include directories - public
+target_include_directories(${PLATFORM_DRIVERS_TARGET}
+    PUBLIC
+    include
+    ${SOURCE_GEN_DIR})
+
+## Platform sources
+target_sources(${PLATFORM_DRIVERS_TARGET}
+    PRIVATE
+    source/device_mps3.c
+    source/timer_mps3.c)
+
+## Platform component: uart
+target_sources(${PLATFORM_DRIVERS_TARGET}
+        PRIVATE
+        ${CMAKE_CURRENT_SOURCE_DIR}/../../components/uart_cmsdk/uart_cmsdk.c)
+target_include_directories(${PLATFORM_DRIVERS_TARGET}
+        PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/../../components/uart_cmsdk/include)
+
+## Platform component: LCD
+target_sources(${PLATFORM_DRIVERS_TARGET}
+        PRIVATE
+        ${CMAKE_CURRENT_SOURCE_DIR}/../../components/lcd_mps3/glcd_mps3.c)
+target_include_directories(${PLATFORM_DRIVERS_TARGET}
+        PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/../../components/lcd_mps3/include)
+
+## This target provides the following definitions for MPS3 specific behaviour
+## TODO: We should aim to remove this now with platform refactoring..
+target_compile_definitions(${PLATFORM_DRIVERS_TARGET}
+    PUBLIC
+    MPS3_PLATFORM
+    ACTIVATION_BUF_SRAM_SZ=${ACTIVATION_BUF_SRAM_SZ}
+    $<$<BOOL:TA_CONFIG_FILE>:TIMING_ADAPTER_AVAILABLE>)
+
+# 5. Add dependencies:
+
+target_link_libraries(${PLATFORM_DRIVERS_TARGET} PUBLIC
+        cmsis_device
+        log)
+
+# 6 Display status:
+message(STATUS "CMAKE_CURRENT_SOURCE_DIR: " ${CMAKE_CURRENT_SOURCE_DIR})
+message(STATUS "*******************************************************")
+message(STATUS "Library                                : " ${PLATFORM_DRIVERS_TARGET})
+message(STATUS "CMAKE_SYSTEM_PROCESSOR                 : " ${CMAKE_SYSTEM_PROCESSOR})
+message(STATUS "*******************************************************")