diff --git a/scripts/cmake/platforms/mps3/build_configuration.cmake b/scripts/cmake/platforms/mps3/build_configuration.cmake
index 101abdd..8613f50 100644
--- a/scripts/cmake/platforms/mps3/build_configuration.cmake
+++ b/scripts/cmake/platforms/mps3/build_configuration.cmake
@@ -17,7 +17,7 @@
 #----------------------------------------------------------------------------
 
 function(set_platform_global_defaults)
-    message(STATUS "Platform: MPS3 FPGA Prototyping Board or FVP")
+    message(STATUS "Platform: Arm MPS3 FPGA Prototyping Board or FVP")
 
     # Set default subsystem for MPS3:
     USER_OPTION(TARGET_SUBSYSTEM "Specify platform target subsystem: sse-300 or sse-310"
diff --git a/scripts/cmake/platforms/mps3/sse-310/mps3-sse-310.ld b/scripts/cmake/platforms/mps3/sse-310/mps3-sse-310.ld
index 085be99..0b6ad79 100644
--- a/scripts/cmake/platforms/mps3/sse-310/mps3-sse-310.ld
+++ b/scripts/cmake/platforms/mps3/sse-310/mps3-sse-310.ld
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: Copyright 2021, 2023 Arm Limited and/or its affiliates <open-source-office@arm.com>
+ * SPDX-FileCopyrightText: Copyright 2021, 2023-2024 Arm Limited and/or its affiliates <open-source-office@arm.com>
  * SPDX-License-Identifier: Apache-2.0
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
@@ -22,8 +22,8 @@
 MEMORY
 {
   ITCM  (rx)  : ORIGIN = 0x10000000, LENGTH = 0x00008000
-  DTCM  (rwx) : ORIGIN = 0x30000000, LENGTH = 0x00008000
   BRAM  (rwx) : ORIGIN = 0x11000000, LENGTH = 0x00200000
+  DTCM  (rwx) : ORIGIN = 0x30000000, LENGTH = 0x00008000
   SRAM  (rwx) : ORIGIN = 0x31000000, LENGTH = 0x00400000
   DDR   (rwx) : ORIGIN = 0x70000000, LENGTH = 0x02000000
 
diff --git a/scripts/cmake/platforms/mps4/build_configuration.cmake b/scripts/cmake/platforms/mps4/build_configuration.cmake
index 918091a..8230c1f 100644
--- a/scripts/cmake/platforms/mps4/build_configuration.cmake
+++ b/scripts/cmake/platforms/mps4/build_configuration.cmake
@@ -83,8 +83,8 @@
     file(MAKE_DIRECTORY ${SECTORS_BIN_DIR})
 
     if (TARGET_SUBSYSTEM STREQUAL sse-315)
-        set(LINKER_SECTION_TAGS     "*.at_itcm" "*.at_ddr")
-        set(LINKER_OUTPUT_BIN_TAGS  "itcm.bin"  "ddr.bin")
+        set(LINKER_SECTION_TAGS     "*.at_boot" "*.at_bram" "*.at_ddr")
+        set(LINKER_OUTPUT_BIN_TAGS  "boot.bin" "bram.bin"  "ddr.bin")
     endif()
 
     add_bin_generation_command(
@@ -119,7 +119,6 @@
                     -C mps4_board.uart0.shutdown_on_eot=1
                     -C mps4_board.visualisation.disable-visualisation=1
                     -C vis_hdlcd.disable_visualisation=1
-                    -C mps4_board.subsystem.iotss3_systemcontrol.INITSVTOR_RST=0x12000000
                     --stat)
         endif()
     endif ()
diff --git a/scripts/cmake/platforms/mps4/sse-315/mps4-sse-315.ld b/scripts/cmake/platforms/mps4/sse-315/mps4-sse-315.ld
index 10ead0e..a5647f9 100644
--- a/scripts/cmake/platforms/mps4/sse-315/mps4-sse-315.ld
+++ b/scripts/cmake/platforms/mps4/sse-315/mps4-sse-315.ld
@@ -22,9 +22,9 @@
 MEMORY
 {
   ITCM  (rx)  : ORIGIN = 0x10000000, LENGTH = 0x00008000
-  DTCM  (rwx) : ORIGIN = 0x30000000, LENGTH = 0x00008000
   BOOT  (rx)  : ORIGIN = 0x11000000, LENGTH = 0x00010000
   BRAM  (rwx) : ORIGIN = 0x12000000, LENGTH = 0x00200000
+  DTCM  (rwx) : ORIGIN = 0x30000000, LENGTH = 0x00008000
   SRAM  (rwx) : ORIGIN = 0x31000000, LENGTH = 0x00400000
   DDR   (rwx) : ORIGIN = 0x70000000, LENGTH = 0x02000000
 
@@ -70,9 +70,13 @@
 
 SECTIONS
 {
-  .text.at_bram :
+  .text.at_boot :
   {
     KEEP(*(.vectors))
+  } > BOOT AT > BOOT
+
+  .text.at_bram :
+  {
     *(.text*)
 
     KEEP(*(.init))
diff --git a/scripts/cmake/platforms/mps4/sse-315/mps4-sse-315.sct b/scripts/cmake/platforms/mps4/sse-315/mps4-sse-315.sct
index 4451f21..35b5904 100644
--- a/scripts/cmake/platforms/mps4/sse-315/mps4-sse-315.sct
+++ b/scripts/cmake/platforms/mps4/sse-315/mps4-sse-315.sct
@@ -25,30 +25,41 @@
 ;
 
 ;---------------------------------------------------------
-; First load region (FPGA SRAM) 2MiB region
-; NOTE: The default INITSVTOR is 0x11000000 and not the
-; ITCM (32K) which we do not use for any code, but
-; could potentially put some critical code in there
-; if we need to.
-; @TODO: The memory pointed to by the INITSVTOR is a 64
-;        kiB location for boot code which we should use.
+; First load region (SRAM) 64KiB boot region
 ;---------------------------------------------------------
-LOAD_REGION_0       0x12000000                  0x00200000
+LOAD_REGION_0       0x11000000                  0x00010000
 {
     ;-----------------------------------------------------
-    ; First 640K of FGPA SRAM.
+    ; 64K boot ROM. Our vector table also
+    ; resides here as the default INITSVTOR is 0x11000000.
+    ; We currently do not use the ITCM for any code, but
+    ; could potentially put some critical code in there
+    ; if we need to.
     ;-----------------------------------------------------
-    bram.bin        0x12000000                  0x000A0000
+    boot.bin        0x11000000                  0x00010000
     {
-        *.o (RESET, +First)
-        * (InRoot$$Sections)
+       *.o (RESET, +First)
+       *(InRoot$$Sections)
+    }
+}
 
-        ; Essentially only RO (code + data)
+;---------------------------------------------------------
+; Second load region (FPGA SRAM) 2MiB region
+;---------------------------------------------------------
+LOAD_REGION_1       0X12000000                  0x00200000
+{
+    ;-----------------------------------------------------
+    ; First 640K of SRAM/BRAM region for RO code,
+    ; 8 byte aligned.
+    ;-----------------------------------------------------
+    bram.bin        0x12000000 ALIGN 8          0x000A0000
+    {
+        ; Essentially only RO (code)
         .ANY (+RO)
     }
 
     ;-----------------------------------------------------
-    ; Next 384K of SRAM/BRAM region for RO, RW and ZI
+    ; Next 384K of SRAM/BRAM region for RW and ZI
     ; data, 8 byte aligned.
     ;-----------------------------------------------------
     data.bin        0x120A0000 ALIGN 8          0x00060000
@@ -91,9 +102,9 @@
 }
 
 ;---------------------------------------------------------
-; Second load region (DDR)
+; Third load region (DDR)
 ;---------------------------------------------------------
-LOAD_REGION_1       0x70000000                  0x02000000
+LOAD_REGION_2       0x70000000                  0x02000000
 {
     ;-----------------------------------------------------
     ; 32 MiB of DDR space for neural network model,
diff --git a/scripts/mps4/sse-315/images.txt b/scripts/mps4/sse-315/images.txt
index 960f2b7..ba5c45e 100644
--- a/scripts/mps4/sse-315/images.txt
+++ b/scripts/mps4/sse-315/images.txt
@@ -1,14 +1,19 @@
-TITLE: Arm MPS3 FPGA prototyping board Images Configuration File
+TITLE: Arm MPS4 FPGA prototyping board Images Configuration File
 
 [IMAGES]
-TOTALIMAGES: 2                          ;Number of Images (Max: 32)
+TOTALIMAGES: 3                          ;Number of Images (Max: 32)
 
 IMAGE0PORT: 1
-IMAGE0ADDRESS: 0x00_1200_0000           ; Address to load into
+IMAGE0ADDRESS: 0x00_1100_0000           ; Address to load into
 IMAGE0UPDATE: RAM                       ; Image Update:NONE/AUTO/FORCE
-IMAGE0FILE: \SOFTWARE\bram.bin          ; Image/data to be loaded
+IMAGE0FILE: \SOFTWARE\boot.bin          ; Image/data to be loaded
 
 IMAGE1PORT: 1
-IMAGE1ADDRESS: 0x00_7000_0000           ; Address to load into
+IMAGE1ADDRESS: 0x00_1200_0000           ; Address to load into
 IMAGE1UPDATE: RAM                       ; Image Update:NONE/AUTO/FORCE
-IMAGE1FILE: \SOFTWARE\ddr.bin           ; Image/data to be loaded
+IMAGE1FILE: \SOFTWARE\bram.bin          ; Image/data to be loaded
+
+IMAGE2PORT: 1
+IMAGE2ADDRESS: 0x00_7000_0000           ; Address to load into
+IMAGE2UPDATE: RAM                       ; Image Update:NONE/AUTO/FORCE
+IMAGE2FILE: \SOFTWARE\ddr.bin           ; Image/data to be loaded