diff --git a/Readme.md b/Readme.md
index c907065..1525829 100644
--- a/Readme.md
+++ b/Readme.md
@@ -60,7 +60,7 @@
 
 The evaluation kit primarily supports [Arm® Corstone™-300](https://developer.arm.com/ip-products/subsystem/corstone/corstone-300)
 and [Arm® Corstone™-310](https://developer.arm.com/ip-products/subsystem/corstone/corstone-310) reference packages as its
-primary targets. Arm® Corstone™-300 design implementation is publicly available on an [Arm MPS3 FPGA board](https://developer.arm.com/tools-and-software/development-boards/fpga-prototyping-boards/download-fpga-images),
+primary targets. Arm® Corstone™-300 and Corstone™-310 design implementations are publicly available on [Download FPGA Images](https://developer.arm.com/tools-and-software/development-boards/fpga-prototyping-boards/download-fpga-images) page,
 or as a [Fixed Virtual Platform of the MPS3 development board](https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps).
 
 The Ethos-U NPU software stack is described [here](https://developer.arm.com/documentation/101888/0500/NPU-software-overview/NPU-software-components?lang=en).
diff --git a/docs/documentation.md b/docs/documentation.md
index 8998adb..6302c68 100644
--- a/docs/documentation.md
+++ b/docs/documentation.md
@@ -39,10 +39,10 @@
   [Arm Compiler download Page](https://developer.arm.com/tools-and-software/embedded/arm-compiler/downloads)
 
 - An Arm® MPS3 FPGA prototyping board and components for FPGA evaluation or a `Fixed Virtual Platform` binary:
-  - An MPS3 board loaded with Arm® Corstone™-300 (`AN552`) or Corstone™-310 reference package. See
+  - An MPS3 board loaded with Arm® Corstone™-300 (`AN552`) or Corstone™-310 reference package (`AN555`). See
     <https://developer.arm.com/downloads/-/download-fpga-images>. You
     must have a USB connection between your machine and the MPS3 board - for UART menu and for deploying the
-    application. 
+    application.
   - `Arm® Corstone™-300` based FVP for MPS3 is available from:
     <https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps>.
   - `Arm® Corstone™-310` based FVP is available under Arm® Virtual Hardware: <https://www.arm.com/products/development-tools/simulation/virtual-hardware>
@@ -168,7 +168,7 @@
       - `use_case`: This contains "model" and "processing" APIs for each individual use case. For example, KWS use case
         contains a class for a generic KWS neural network model and the "processing" API give user an easier way to drive
         the MFCC calculations.
-      
+
 > **NOTE:** The API here is also used to export a CMSIS-pack from this repository and therefore, it is imperative to
 > that the sources here do not depend on any HAL component or drive any platform dependent logic. If you are looking to
 > reuse components from this repository for your application level logic, this directory should be the prime candidate.
@@ -240,13 +240,13 @@
     for the set-up before calling the user defined "main" function in the higher-level `application` logic.
     It is a separate CMake project that is built into a static library `libcmsis_device.a`. It depends on a CMSIS repo
     through `CMSIS_SRC_PATH` variable.
-    The static library is used by platform code. 
+    The static library is used by platform code.
 
 - `source/platform/mps3`\
   `source/platform/simple`:
   These folders contain platform specific declaration and defines, such as, platform initialisation code, peripheral
   memory map, system registers, system specific timer implementation and other.
-  Platform is built from selected components and configured cmsis device. It is a separate CMake project, and is 
+  Platform is built from selected components and configured cmsis device. It is a separate CMake project, and is
   built into a static library `libplatform-drivers.a`. It is linked into HAL library.
 
 ## Models and resources
diff --git a/docs/sections/deployment.md b/docs/sections/deployment.md
index ccf46f2..15a58c3 100644
--- a/docs/sections/deployment.md
+++ b/docs/sections/deployment.md
@@ -136,10 +136,10 @@
 
 ### Running the FVP without the UI
 
-If there is a need to run the FVP without the UI (e.g running the FVP inside of a docker container), 
+If there is a need to run the FVP without the UI (e.g running the FVP inside of a docker container),
 it can be done as follows:
 
-Add `-C mps3_board.visualisation.disable-visualisation=1` and `-C mps3_board.telnetterminal0.start_telnet=0` 
+Add `-C mps3_board.visualisation.disable-visualisation=1` and `-C mps3_board.telnetterminal0.start_telnet=0`
 to the command line arguments when starting the FVP. For example:
 
 ```commandline
@@ -187,8 +187,10 @@
 > **Note:**: These instructions are valid only if the evaluation is being done using the MPS3 FPGA platform using
 > an Arm® Corstone™-300 (AN552) or Corstone™-310 (AN555) implementations.
 
-For details on platform set-up, please see the relevant documentation. For the Arm® Corstone™-300 implementation
-`AN552`, the document is available here: [Arm Developer](https://developer.arm.com/documentation/dai0552/).
+For details on platform set-up, please see the relevant documentation.
+
+- Arm® Corstone™-300 implementation `AN552`: [Arm Developer - AN552](https://developer.arm.com/documentation/dai0552/).
+- Arm® Corstone™-310 implementation `AN555`: [Arm Developer - AN555](https://developer.arm.com/documentation/107642/B/?lang=en)
 
 For the MPS3 FPGA board, instead of loading the `axf` file directly, copy the executable blobs generated under the
 `sectors/<use_case>` subdirectory to the micro SD card located on the board. Also, the `sectors/images.txt` file is