MLECO-2985 Adding Corstone-310 support
Change-Id: Ifa4b11154478355c10cb3e747b9938a74afd242b
Signed-off-by: Eanna O Cathain <eanna.ocathain@arm.com>
diff --git a/scripts/cmake/platforms/mps3/sse-310/mps3-sse-310.ld b/scripts/cmake/platforms/mps3/sse-310/mps3-sse-310.ld
new file mode 100644
index 0000000..a631aaa
--- /dev/null
+++ b/scripts/cmake/platforms/mps3/sse-310/mps3-sse-310.ld
@@ -0,0 +1,214 @@
+/*
+ * Copyright (c) 2021 Arm Limited. All rights reserved.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+__STACK_SIZE = 0x00008000;
+__HEAP_SIZE = 0x000C0000;
+
+/* System memory brief */
+MEMORY
+{
+ ITCM (rx) : ORIGIN = 0x10000000, LENGTH = 0x00008000
+ DTCM (rwx) : ORIGIN = 0x30000000, LENGTH = 0x00008000
+ BRAM (rwx) : ORIGIN = 0x11000000, LENGTH = 0x00200000
+ SRAM (rwx) : ORIGIN = 0x31000000, LENGTH = 0x00400000
+ DDR (rwx) : ORIGIN = 0x70000000, LENGTH = 0x02000000
+
+ /* Dynamic load regions declared for use by FVP only
+ * These regions are mentioned in the CMake subsystem profile.
+ * Do not change the addresses here in isolation. */
+ DDR_dynamic_model (rx) : ORIGIN = 0x90000000, LENGTH = 0x02000000
+ DDR_dynamic_ifm (rx) : ORIGIN = 0x92000000, LENGTH = 0x01000000
+ DDR_dynamic_ofm (rx) : ORIGIN = 0x93000000, LENGTH = 0x01000000
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions ITCM and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __copy_table_start__
+ * __copy_table_end__
+ * __zero_table_start__
+ * __zero_table_end__
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text.at_bram :
+ {
+ KEEP(*(.vectors))
+
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ KEEP(*(.eh_frame*))
+
+ *(vtable)
+ *(.data)
+ *(.data.*)
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ . = ALIGN(4);
+
+ *(.rodata*)
+ . = ALIGN(4);
+ * (npu_driver_version)
+ . = ALIGN(4);
+ * (npu_driver_arch_version)
+ . = ALIGN(4);
+
+ __copy_table_start__ = .;
+ . = ALIGN(4);
+ __copy_table_end__ = .;
+ } > BRAM
+
+ __exidx_start = .;
+ .ARM.exidx.at_bram :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > BRAM
+ __exidx_end = .;
+
+ .sram :
+ {
+ . = ALIGN(16);
+ /* Cache area (if used) */
+ *(.bss.NoInit.ethos_u_cache)
+ . = ALIGN (16);
+ /* activation buffers a.k.a tensor arena when memory mode sram only or shared sram */
+ *(.bss.NoInit.activation_buf_sram)
+ . = ALIGN(16);
+ } > SRAM AT > SRAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ *(.bss)
+ *(.bss.*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ } > BRAM
+
+ .zero.table.at_bram :
+ {
+ . = ALIGN(4);
+ __zero_table_start__ = .;
+
+ LONG (__bss_start__)
+ LONG ((__bss_end__ - __bss_start__)/4) /* Size is in 32-bit words */
+
+ __zero_table_end__ = .;
+ } > BRAM
+
+ .heap (COPY) :
+ {
+ . = ALIGN(8);
+ __end__ = .;
+ PROVIDE(end = .);
+ . = . + __HEAP_SIZE;
+ . = ALIGN(8);
+ __HeapLimit = .;
+ } > BRAM
+
+ __bram_total = ALIGN(4);
+
+ ASSERT( __bram_total < (ORIGIN(BRAM) + LENGTH(BRAM)), "BRAM overflow")
+
+ .stack (ORIGIN(DTCM) + LENGTH(DTCM) - __STACK_SIZE) (COPY) :
+ {
+ . = ALIGN(8);
+ __StackLimit = .;
+ . = . + __STACK_SIZE;
+ . = ALIGN(8);
+ __StackTop = .;
+ } > DTCM
+ PROVIDE(__stack = __StackTop);
+ ASSERT(__STACK_SIZE <= LENGTH(DTCM), "DTCM overflow")
+
+ .ddr.at_ddr :
+ {
+ /* __attribute__((aligned(16))) is not handled by the CMSIS startup code.
+ * Force the alignment here as a workaround */
+ . = ALIGN(16);
+ /* nn model's baked in input matrices */
+ *(ifm)
+ . = ALIGN(16);
+ /* nn model's default space */
+ *(nn_model)
+ . = ALIGN (16);
+ /* labels */
+ *(labels)
+ . = ALIGN (16);
+ /* activation buffers a.k.a tensor arena when memory mode dedicated sram */
+ *(activation_buf_dram)
+ . = ALIGN (16);
+ } > DDR AT > DDR
+
+}