diff --git a/scripts/cmake/cmsis-dsp.cmake b/scripts/cmake/cmsis-dsp.cmake
index f2de158..73f6100 100644
--- a/scripts/cmake/cmsis-dsp.cmake
+++ b/scripts/cmake/cmsis-dsp.cmake
@@ -69,7 +69,7 @@
 endif ()
 
 # 5. Add any custom/conditional flags for compilation or linkage
-if (${CMAKE_SYSTEM_PROCESSOR} STREQUAL cortex-m55)
+if ("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "cortex-m55" OR "${CMAKE_SYSTEM_ARCH}" STREQUAL "armv8.1-m.main")
     target_compile_definitions(${CMSIS_DSP_TARGET} PUBLIC
         ARM_MATH_MVEI
         ARM_MATH_DSP
diff --git a/scripts/cmake/common_user_options.cmake b/scripts/cmake/common_user_options.cmake
index 7dc68de..7981068 100644
--- a/scripts/cmake/common_user_options.cmake
+++ b/scripts/cmake/common_user_options.cmake
@@ -43,7 +43,7 @@
     mps3
     STRING)
 
-USER_OPTION(TARGET_SUBSYSTEM "Specify platform target subsystem: sse-300 or none"
+USER_OPTION(TARGET_SUBSYSTEM "Specify platform target subsystem: sse-300, sse-310 or none"
     sse-300
     STRING)
 
diff --git a/scripts/cmake/platforms/mps3/build_configuration.cmake b/scripts/cmake/platforms/mps3/build_configuration.cmake
index 76c9e78..6e21d9b 100644
--- a/scripts/cmake/platforms/mps3/build_configuration.cmake
+++ b/scripts/cmake/platforms/mps3/build_configuration.cmake
@@ -17,11 +17,35 @@
 
 function(set_platform_global_defaults)
     message(STATUS "Platform: MPS3 FPGA Prototyping Board or FVP")
+
+    if (NOT DEFINED CMAKE_SYSTEM_PROCESSOR)
+        if (TARGET_SUBSYSTEM STREQUAL sse-300)
+            set(CMAKE_SYSTEM_PROCESSOR cortex-m55 CACHE STRING "Cortex-M CPU to use")
+        elseif(TARGET_SUBSYSTEM STREQUAL sse-310)
+            # For CMake versions older than 3.21, the compiler and linker flags for
+            # ArmClang are added by CMake automatically which makes it mandatory to
+            # define the system processor. For CMake versions 3.21 or later (that
+            # implement policy CMP0123) we use armv8.1-m as the arch until the
+            # toolchain officially supports Cortex-M85. For older version of CMake
+            # we revert to using Cortex-M55 as the processor (as this will work
+            # for M85 too).
+            if(POLICY CMP0123)
+                set(CMAKE_SYSTEM_ARCH armv8.1-m.main CACHE STRING "System arch to use")
+            else()
+                set(CMAKE_SYSTEM_PROCESSOR  cortex-m55)
+            endif()
+        endif()
+    endif()
+
     if (NOT DEFINED CMAKE_TOOLCHAIN_FILE)
         set(CMAKE_TOOLCHAIN_FILE ${CMAKE_TOOLCHAIN_DIR}/bare-metal-gcc.cmake
                 CACHE FILEPATH "Toolchain file")
     endif()
 
+    if ((ETHOS_U_NPU_ID STREQUAL U65) AND (TARGET_SUBSYSTEM STREQUAL sse-310))
+        message(FATAL_ERROR "Non compatible Ethos-U NPU processor ${ETHOS_U_NPU_ID} and target subsystem ${TARGET_SUBSYSTEM}")
+    endif()
+
     set(LINKER_SCRIPT_NAME "mps3-${TARGET_SUBSYSTEM}" PARENT_SCOPE)
     set(PLATFORM_DRIVERS_DIR "${HAL_PLATFORM_DIR}/mps3" PARENT_SCOPE)
 
@@ -35,7 +59,7 @@
     # Add link options for the linker script to be used:
     add_linker_script(
             ${PARSED_TARGET_NAME}          # Target
-            ${CMAKE_SCRIPTS_DIR}/platforms/mps3    # Directory path
+            ${CMAKE_SCRIPTS_DIR}/platforms/mps3/${TARGET_SUBSYSTEM}    # Directory path
             ${LINKER_SCRIPT_NAME})  # Name of the file without suffix
 
     add_target_map_file(
@@ -48,8 +72,13 @@
     file(REMOVE_RECURSE ${SECTORS_BIN_DIR})
     file(MAKE_DIRECTORY ${SECTORS_BIN_DIR})
 
-    set(LINKER_SECTION_TAGS     "*.at_itcm" "*.at_ddr")
-    set(LINKER_OUTPUT_BIN_TAGS  "itcm.bin"  "ddr.bin")
+    if (TARGET_SUBSYSTEM STREQUAL sse-310)
+        set(LINKER_SECTION_TAGS     "*.at_bram" "*.at_ddr")
+        set(LINKER_OUTPUT_BIN_TAGS  "bram.bin"  "ddr.bin")
+    else()
+        set(LINKER_SECTION_TAGS     "*.at_itcm" "*.at_ddr")
+        set(LINKER_OUTPUT_BIN_TAGS  "itcm.bin"  "ddr.bin")
+    endif()
 
     add_bin_generation_command(
             TARGET_NAME ${PARSED_TARGET_NAME}
@@ -64,4 +93,4 @@
             POST_BUILD
             COMMAND ${CMAKE_COMMAND} -E copy ${MPS3_FPGA_CONFIG} ${SECTORS_DIR})
 
-endfunction()
\ No newline at end of file
+endfunction()
diff --git a/scripts/cmake/platforms/mps3/mps3-sse-300.ld b/scripts/cmake/platforms/mps3/sse-300/mps3-sse-300.ld
similarity index 100%
rename from scripts/cmake/platforms/mps3/mps3-sse-300.ld
rename to scripts/cmake/platforms/mps3/sse-300/mps3-sse-300.ld
diff --git a/scripts/cmake/platforms/mps3/mps3-sse-300.sct b/scripts/cmake/platforms/mps3/sse-300/mps3-sse-300.sct
similarity index 100%
rename from scripts/cmake/platforms/mps3/mps3-sse-300.sct
rename to scripts/cmake/platforms/mps3/sse-300/mps3-sse-300.sct
diff --git a/scripts/cmake/platforms/mps3/sse-310/mps3-sse-310.ld b/scripts/cmake/platforms/mps3/sse-310/mps3-sse-310.ld
new file mode 100644
index 0000000..a631aaa
--- /dev/null
+++ b/scripts/cmake/platforms/mps3/sse-310/mps3-sse-310.ld
@@ -0,0 +1,214 @@
+/*
+ * Copyright (c) 2021 Arm Limited. All rights reserved.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+__STACK_SIZE = 0x00008000;
+__HEAP_SIZE  = 0x000C0000;
+
+/* System memory brief */
+MEMORY
+{
+  ITCM  (rx)  : ORIGIN = 0x10000000, LENGTH = 0x00008000
+  DTCM  (rwx) : ORIGIN = 0x30000000, LENGTH = 0x00008000
+  BRAM  (rwx) : ORIGIN = 0x11000000, LENGTH = 0x00200000
+  SRAM  (rwx) : ORIGIN = 0x31000000, LENGTH = 0x00400000
+  DDR   (rwx) : ORIGIN = 0x70000000, LENGTH = 0x02000000
+
+  /* Dynamic load regions declared for use by FVP only
+   * These regions are mentioned in the CMake subsystem profile.
+   * Do not change the addresses here in isolation. */
+  DDR_dynamic_model (rx) : ORIGIN = 0x90000000, LENGTH = 0x02000000
+  DDR_dynamic_ifm   (rx) : ORIGIN = 0x92000000, LENGTH = 0x01000000
+  DDR_dynamic_ofm   (rx) : ORIGIN = 0x93000000, LENGTH = 0x01000000
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions ITCM and RAM.
+ * It references following symbols, which must be defined in code:
+ *   Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __copy_table_start__
+ *   __copy_table_end__
+ *   __zero_table_start__
+ *   __zero_table_end__
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __end__
+ *   end
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+  .text.at_bram :
+  {
+    KEEP(*(.vectors))
+
+    KEEP(*(.init))
+    KEEP(*(.fini))
+
+    /* .ctors */
+    *crtbegin.o(.ctors)
+    *crtbegin?.o(.ctors)
+    *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+    *(SORT(.ctors.*))
+    *(.ctors)
+
+    /* .dtors */
+    *crtbegin.o(.dtors)
+    *crtbegin?.o(.dtors)
+    *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+    *(SORT(.dtors.*))
+    *(.dtors)
+
+    KEEP(*(.eh_frame*))
+    
+    *(vtable)
+    *(.data)
+    *(.data.*)
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP(*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP(*(SORT(.init_array.*)))
+    KEEP(*(.init_array))
+    PROVIDE_HIDDEN (__init_array_end = .);
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP(*(SORT(.fini_array.*)))
+    KEEP(*(.fini_array))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+    KEEP(*(.jcr*))
+    . = ALIGN(4);
+
+    *(.ARM.extab* .gnu.linkonce.armextab.*)
+    . = ALIGN(4);
+
+    *(.rodata*)
+    . = ALIGN(4);
+    * (npu_driver_version)
+    . = ALIGN(4);
+    * (npu_driver_arch_version)
+    . = ALIGN(4);
+
+    __copy_table_start__ = .;
+    . = ALIGN(4);
+    __copy_table_end__ = .;
+  } > BRAM
+
+  __exidx_start = .;
+  .ARM.exidx.at_bram :
+  {
+    *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+  } > BRAM
+  __exidx_end = .;
+
+  .sram :
+  {
+    . = ALIGN(16);
+    /* Cache area (if used) */
+    *(.bss.NoInit.ethos_u_cache)
+    . = ALIGN (16);
+    /* activation buffers a.k.a tensor arena when memory mode sram only or shared sram */
+    *(.bss.NoInit.activation_buf_sram)
+    . = ALIGN(16);
+  } > SRAM AT > SRAM
+
+  .bss :
+  {
+    . = ALIGN(4);
+    __bss_start__ = .;
+    *(.bss)
+    *(.bss.*)
+    *(COMMON)
+    . = ALIGN(4);
+    __bss_end__ = .;
+  } > BRAM
+
+  .zero.table.at_bram :
+  {
+    . = ALIGN(4);
+    __zero_table_start__ = .;
+
+    LONG (__bss_start__)
+    LONG ((__bss_end__ - __bss_start__)/4) /* Size is in 32-bit words */
+
+    __zero_table_end__ = .;
+  } > BRAM
+  
+  .heap (COPY) :
+  {
+    . = ALIGN(8);
+    __end__ = .;
+    PROVIDE(end = .);
+    . = . + __HEAP_SIZE;
+    . = ALIGN(8);
+    __HeapLimit = .;
+  } > BRAM
+
+  __bram_total = ALIGN(4);
+
+  ASSERT( __bram_total < (ORIGIN(BRAM) + LENGTH(BRAM)), "BRAM overflow")
+
+  .stack (ORIGIN(DTCM) + LENGTH(DTCM) - __STACK_SIZE) (COPY) :
+  {
+    . = ALIGN(8);
+    __StackLimit = .;
+    . = . + __STACK_SIZE;
+    . = ALIGN(8);
+    __StackTop = .;
+  } > DTCM
+  PROVIDE(__stack = __StackTop);
+  ASSERT(__STACK_SIZE <= LENGTH(DTCM), "DTCM overflow")
+
+  .ddr.at_ddr :
+  {
+    /* __attribute__((aligned(16))) is not handled by the CMSIS startup code.
+     * Force the alignment here as a workaround */
+    . = ALIGN(16);
+    /* nn model's baked in input matrices */
+    *(ifm)
+    . = ALIGN(16);
+    /* nn model's default space */
+    *(nn_model)
+    . = ALIGN (16);
+    /* labels */
+    *(labels)
+    . = ALIGN (16);
+    /* activation buffers a.k.a tensor arena when memory mode dedicated sram */
+    *(activation_buf_dram)
+    . = ALIGN (16);
+  } > DDR AT > DDR
+
+}
diff --git a/scripts/cmake/platforms/mps3/sse-310/mps3-sse-310.sct b/scripts/cmake/platforms/mps3/sse-310/mps3-sse-310.sct
new file mode 100644
index 0000000..452b0fe
--- /dev/null
+++ b/scripts/cmake/platforms/mps3/sse-310/mps3-sse-310.sct
@@ -0,0 +1,140 @@
+;  Copyright (c) 2021 Arm Limited. All rights reserved.
+;  SPDX-License-Identifier: Apache-2.0
+;
+;  Licensed under the Apache License, Version 2.0 (the "License");
+;  you may not use this file except in compliance with the License.
+;  You may obtain a copy of the License at
+;
+;      http://www.apache.org/licenses/LICENSE-2.0
+;
+;  Unless required by applicable law or agreed to in writing, software
+;  distributed under the License is distributed on an "AS IS" BASIS,
+;  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;  See the License for the specific language governing permissions and
+;  limitations under the License.
+
+; *************************************************************
+; ***       Scatter-Loading Description File                ***
+; *************************************************************
+; Please see docs/sections/appendix.md for memory mapping
+; information.
+;
+; Note: Ethos-U NPU can access BRAM, internal SRAM and the DDR
+;       sections => activation buffers and the model should
+;       only be placed in those regions.
+;
+
+;---------------------------------------------------------
+; First load region (SRAM/BRAM) 2MiB region
+;---------------------------------------------------------
+LOAD_REGION_0       0x11000000                  0x00200000
+{
+    ;-----------------------------------------------------
+    ; 0.5 MiB of SRAM/BRAM region. Our vector table also
+    ; resides here as the default INITSVTOR is 0x11000000.
+    ; We currently do not use the ITCM for any code, but
+    ; could potentially put some critical code in there
+    ; if we need to.
+    ;-----------------------------------------------------
+    bram.bin        0x11000000                  0x00080000
+    {
+        *.o (RESET, +First)
+        * (InRoot$$Sections)
+
+        ; Essentially only RO (code + data)
+        .ANY (+RO)
+    }
+
+    ;-----------------------------------------------------
+    ; Next 0.5 MiB of SRAM/BRAM region for RO, RW and ZI
+    ; data, 8 byte aligned.
+    ;-----------------------------------------------------
+    data.bin        0x11080000 ALIGN 8          0x00080000
+    {
+        ; Any RO-DATA
+        .ANY (+RO-DATA)
+
+        ; Any R/W and/or zero initialised data
+        .ANY(+RW +ZI)
+    }
+
+    ;-----------------------------------------------------
+    ; 768 KiB of remaining part of the 1MiB BRAM used as
+    ; heap space.
+    ;-----------------------------------------------------
+    ARM_LIB_HEAP    0x11100000 EMPTY ALIGN 8    0x000C0000
+    {}
+
+    ;-----------------------------------------------------
+    ; 32 kiB of stack space occupying the DTCM region.
+    ;-----------------------------------------------------
+    ARM_LIB_STACK   0x30000000 EMPTY ALIGN 8    0x00008000
+    {}
+
+    ;-----------------------------------------------------
+    ; FPGA internal SRAM of 2MiB - reserved for activation
+    ; buffers. The total memory is 4 MiB (we are choosing
+    ; to not use the other bank). This region should have
+    ; 3 cycle read latency from both CPU and Ethos-U NPU.
+    ;-----------------------------------------------------
+    isram.bin       0x31000000  UNINIT ALIGN 16 0x00200000
+    {
+        ; Cache area (if used)
+        *.o (.bss.NoInit.ethos_u_cache)
+
+        ; activation buffers a.k.a tensor arena when
+        ; memory mode sram only or shared sram
+        *.o (.bss.NoInit.activation_buf_sram)
+    }
+}
+
+;---------------------------------------------------------
+; Second load region (DDR)
+;---------------------------------------------------------
+LOAD_REGION_1       0x70000000                  0x02000000
+{
+    ;-----------------------------------------------------
+    ; 32 MiB of DDR space for neural network model,
+    ; input vectors and labels. If the activation buffer
+    ; size required by the network is bigger than the
+    ; SRAM size available, it is accommodated here.
+    ;-----------------------------------------------------
+    ddr.bin        0x70000000 ALIGN 16         0x02000000
+    {
+        ; nn model's baked in input matrices
+        *.o (ifm)
+
+        ; nn model's default space
+        *.o (nn_model)
+
+        ; labels
+        *.o (labels)
+
+        ; activation buffers a.k.a tensor arena when memory mode dedicated sram
+        *.o (activation_buf_dram)
+    }
+
+    ;-----------------------------------------------------
+    ; The following regions are for use by the FVP to
+    ; allow loading or dumping of dynamic data into or
+    ; from the memory. These regions are mentioned in
+    ; the CMake subsystem profile. Do not change the
+    ; addresses and sizes below in isolation.
+    ;-----------------------------------------------------
+    ; 32 MiB of model space for run-time load of model
+    ;-----------------------------------------------------
+    runtime_model   0x90000000 EMPTY ALIGN 16   0x02000000
+    {}
+
+    ;-----------------------------------------------------
+    ; 16 MiB of IFM space for run-time loading (FVP only)
+    ;-----------------------------------------------------
+    runtime_ifm     0x92000000 EMPTY ALIGN 16   0x01000000
+    {}
+
+    ;-----------------------------------------------------
+    ; 16 MiB of OFM space for run-time loading (FVP only)
+    ;-----------------------------------------------------
+    runtime_ofm     0x93000000 EMPTY ALIGN 16   0x01000000
+    {}
+}
diff --git a/scripts/cmake/tensorflow.cmake b/scripts/cmake/tensorflow.cmake
index 2374c86..8a790bc 100644
--- a/scripts/cmake/tensorflow.cmake
+++ b/scripts/cmake/tensorflow.cmake
@@ -50,7 +50,16 @@
     set(TENSORFLOW_LITE_MICRO_TARGET_ARCH x86_64)
 else()
     set(TENSORFLOW_LITE_MICRO_TARGET "cortex_m_generic")
-    set(TENSORFLOW_LITE_MICRO_TARGET_ARCH ${CMAKE_SYSTEM_PROCESSOR}${CPU_FEATURES})
+
+    if ("${CMAKE_SYSTEM_ARCH}" STREQUAL "armv8.1-m.main")
+        # TensorFlow's generic makefile doesn't currently have a flow for Cortex-M85.
+        # We build for Arm Cortex-M55 instead.
+        # @TODO: check with latest TensorFlow package.
+        set(TENSORFLOW_LITE_MICRO_TARGET_ARCH "cortex-m55")
+    else()
+        set(TENSORFLOW_LITE_MICRO_TARGET_ARCH "${CMAKE_SYSTEM_PROCESSOR}")
+    endif()
+
     if(ETHOS_U_NPU_ENABLED)
         # Arm Ethos-U55 NPU is the co-processor for ML workload:
         set(TENSORFLOW_LITE_MICRO_CO_PROCESSOR  "ethos_u")
diff --git a/scripts/cmake/toolchains/bare-metal-armclang.cmake b/scripts/cmake/toolchains/bare-metal-armclang.cmake
index d0b0824..97da76f 100644
--- a/scripts/cmake/toolchains/bare-metal-armclang.cmake
+++ b/scripts/cmake/toolchains/bare-metal-armclang.cmake
@@ -31,7 +31,7 @@
 set(CMAKE_C_COMPILER_WORKS          1)
 set(CMAKE_CXX_COMPILER_WORKS        1)
 
-if (NOT DEFINED CMAKE_SYSTEM_PROCESSOR)
+if (NOT DEFINED CMAKE_SYSTEM_PROCESSOR AND NOT DEFINED CMAKE_SYSTEM_ARCH)
     set(CMAKE_SYSTEM_PROCESSOR      cortex-m55)
 endif()
 
@@ -39,13 +39,27 @@
     # Flags for cortex-m55
     set(CPU_ID                      M55)
     set(CPU_COMPILE_DEF             CPU_CORTEX_${CPU_ID})
-    set(CPU_NAME                    ${CMAKE_SYSTEM_PROCESSOR})
     set(ARM_CPU                     "ARMC${CPU_ID}")
     set(FLOAT_ABI                   hard)
     set(ARM_MATH_DSP                1)
     set(ARM_MATH_LOOPUNROLL         1)
     set(CPU_HEADER_FILE             "${ARM_CPU}.h")
+    set(CPU_COMPILE_OPTION          "-mcpu=${CMAKE_SYSTEM_PROCESSOR}")
     set(CPU_LINK_OPT                "--cpu=Cortex-${CPU_ID}")
+elseif (CMAKE_SYSTEM_PROCESSOR STREQUAL cortex-m85 OR CMAKE_SYSTEM_ARCH STREQUAL armv8.1-m.main)
+    # Flags for Cortex-M85
+    set(CPU_ID                      ARMv81MML_DSP_DP_MVE_FP)
+    set(ARM_CPU                     "ARMv81MML")
+    set(CPU_COMPILE_DEF             ${CPU_ID})
+    set(FLOAT_ABI                   hard)
+    set(ARM_MATH_DSP                1)
+    set(ARM_MATH_LOOPUNROLL         1)
+
+    # @TODO: Revise once we have the CPU file in CMSIS and CPU flags
+    # are supported by toolchains.
+    set(CPU_HEADER_FILE             "${CPU_ID}.h")
+    set(CPU_COMPILE_OPTION          "-march=armv8.1-m.main+mve.fp+fp.dp")
+    set(CPU_LINK_OPT                "--cpu=8.1-M.Main.mve.fp")
 elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL cortex-m33)
     # Flags for cortex-m33 to go here
 endif()
@@ -67,11 +81,11 @@
 # Arch compile options:
 add_compile_options(
     -mthumb
-    -mcpu=${CPU_NAME}
     -mfloat-abi=${FLOAT_ABI}
     --target=arm-arm-non-eabi
     -mlittle-endian
-    -MD)
+    -MD
+    ${CPU_COMPILE_OPTION})
 
 # Compile definitions:
 add_compile_definitions(
diff --git a/scripts/cmake/toolchains/bare-metal-gcc.cmake b/scripts/cmake/toolchains/bare-metal-gcc.cmake
index a5688d6..a6d6c0e 100644
--- a/scripts/cmake/toolchains/bare-metal-gcc.cmake
+++ b/scripts/cmake/toolchains/bare-metal-gcc.cmake
@@ -29,7 +29,7 @@
 set(CMAKE_C_COMPILER_WORKS          1)
 set(CMAKE_CXX_COMPILER_WORKS        1)
 
-if (NOT DEFINED CMAKE_SYSTEM_PROCESSOR)
+if (NOT DEFINED CMAKE_SYSTEM_PROCESSOR AND NOT DEFINED CMAKE_SYSTEM_ARCH)
     set(CMAKE_SYSTEM_PROCESSOR      cortex-m55)
 endif()
 
@@ -37,13 +37,27 @@
     # Flags for cortex-m55
     set(CPU_ID                      M55)
     set(CPU_COMPILE_DEF             CPU_CORTEX_${CPU_ID})
-    set(CPU_NAME                    ${CMAKE_SYSTEM_PROCESSOR})
     set(ARM_CPU                     "ARMC${CPU_ID}")
     set(FLOAT_ABI                   hard)
     set(ARM_MATH_DSP                1)
     set(ARM_MATH_LOOPUNROLL         1)
     set(CPU_HEADER_FILE             "${ARM_CPU}.h")
+    set(CPU_COMPILE_OPTION          "-mcpu=${CMAKE_SYSTEM_PROCESSOR}")
     set(CPU_LINK_OPT                "--cpu=Cortex-${CPU_ID}")
+elseif (CMAKE_SYSTEM_PROCESSOR STREQUAL cortex-m85 OR CMAKE_SYSTEM_ARCH STREQUAL armv8.1-m.main)
+    # Flags for Cortex-M85
+    set(CPU_ID                      ARMv81MML_DSP_DP_MVE_FP)
+    set(ARM_CPU                     "ARMv81MML")
+    set(CPU_COMPILE_DEF             ${CPU_ID})
+    set(FLOAT_ABI                   hard)
+    set(ARM_MATH_DSP                1)
+    set(ARM_MATH_LOOPUNROLL         1)
+
+    # @TODO: Revise once we have the CPU file in CMSIS and CPU flags
+    # are supported by toolchains.
+    set(CPU_HEADER_FILE             "${CPU_ID}.h")
+    set(CPU_COMPILE_OPTION          "-march=armv8.1-m.main+mve.fp+fp.dp")
+    set(CPU_LINK_OPT                "--cpu=8.1-M.Main.mve.fp")
 elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL cortex-m33)
     # Flags for cortex-m33 to go here
 endif()
@@ -67,10 +81,10 @@
 # Arch compile options:
 add_compile_options(
     -mthumb
-    -mcpu=${CPU_NAME}
     -mfloat-abi=${FLOAT_ABI}
     -mlittle-endian
-    -MD)
+    -MD
+    ${CPU_COMPILE_OPTION})
 
 # Compile definitions:
 add_compile_definitions(
@@ -82,7 +96,7 @@
 # Link options:
 add_link_options(
     -mthumb
-    -mcpu=${CPU_NAME}
+    ${CPU_COMPILE_OPTION}
     -mfloat-abi=${FLOAT_ABI}
     -mlittle-endian
     --stats