MLECO-2985 Adding Corstone-310 support
Change-Id: Ifa4b11154478355c10cb3e747b9938a74afd242b
Signed-off-by: Eanna O Cathain <eanna.ocathain@arm.com>
diff --git a/source/hal/source/platform/mps3/CMakeLists.txt b/source/hal/source/platform/mps3/CMakeLists.txt
index 332837c..b90f6b7 100644
--- a/source/hal/source/platform/mps3/CMakeLists.txt
+++ b/source/hal/source/platform/mps3/CMakeLists.txt
@@ -19,7 +19,7 @@
# MPS3 platform support library #
#########################################################
-cmake_minimum_required(VERSION 3.15.6)
+cmake_minimum_required(VERSION 3.16.3)
set(PLATFORM_DRIVERS_TARGET platform_drivers)
project(${PLATFORM_DRIVERS_TARGET}
DESCRIPTION "Platform drivers library for MPS3 FPGA/FVP targets"
@@ -41,8 +41,22 @@
set(ETHOS_U_SEC_ENABLED "1" CACHE STRING "Ethos-U NPU Security enable")
set(ETHOS_U_PRIV_ENABLED "1" CACHE STRING "Ethos-U NPU Privilege enable")
- set(DYNAMIC_MODEL_BASE "0x90000000" CACHE STRING "Region to be used for dynamic load of model into memory")
- set(DYNAMIC_MODEL_SIZE "0x02000000" CACHE STRING "Size of the space reserved for the model")
+ if (ETHOS_U_NPU_TIMING_ADAPTER_ENABLED)
+ set(TA0_BASE "0x58103000" CACHE STRING "Ethos-U NPU timing adapter 0")
+ set(TA1_BASE "0x58103200" CACHE STRING "Ethos-U NPU timing adapter 1")
+ endif()
+endif()
+
+# Define target specific base addresses here (before adding the components)
+if (TARGET_SUBSYSTEM STREQUAL sse-310)
+ set(UART0_BASE "0x49303000" CACHE STRING "UART base address")
+ set(UART0_BAUDRATE "115200" CACHE STRING "UART baudrate")
+ set(SYSTEM_CORE_CLOCK "25000000" CACHE STRING "System peripheral clock (Hz)")
+ set(CLCD_CONFIG_BASE "0x4930A000" CACHE STRING "LCD configuration base address")
+ set(ETHOS_U_BASE_ADDR "0x50004000" CACHE STRING "Ethos-U NPU base address")
+ set(ETHOS_U_IRQN "16" CACHE STRING "Ethos-U55 Interrupt")
+ set(ETHOS_U_SEC_ENABLED "1" CACHE STRING "Ethos-U NPU Security enable")
+ set(ETHOS_U_PRIV_ENABLED "1" CACHE STRING "Ethos-U NPU Privilege enable")
if (ETHOS_U_NPU_TIMING_ADAPTER_ENABLED)
set(TA0_BASE "0x58103000" CACHE STRING "Ethos-U NPU timing adapter 0")
@@ -50,6 +64,9 @@
endif()
endif()
+set(DYNAMIC_MODEL_BASE "0x90000000" CACHE STRING "Region to be used for dynamic load of model into memory")
+set(DYNAMIC_MODEL_SIZE "0x02000000" CACHE STRING "Size of the space reserved for the model")
+
math(EXPR IFM_BASE "${DYNAMIC_MODEL_BASE} + ${DYNAMIC_MODEL_SIZE}" OUTPUT_FORMAT HEXADECIMAL)
set(DYNAMIC_IFM_BASE "${IFM_BASE}" CACHE STRING "Base address for IFMs to be loaded")
set(DYNAMIC_IFM_SIZE "0x01000000" CACHE STRING "Size of the space reserved for the IFM")
@@ -57,6 +74,7 @@
set(DYNAMIC_OFM_BASE "${OFM_BASE}" CACHE STRING "Base address for OFMs to be dumped to")
set(DYNAMIC_OFM_SIZE "0x01000000" CACHE STRING "Size of the space reserved for the OFM")
+
# 2. Create static library
add_library(${PLATFORM_DRIVERS_TARGET} STATIC)
@@ -142,4 +160,5 @@
message(STATUS "*******************************************************")
message(STATUS "Library : " ${PLATFORM_DRIVERS_TARGET})
message(STATUS "CMAKE_SYSTEM_PROCESSOR : " ${CMAKE_SYSTEM_PROCESSOR})
+message(STATUS "CMAKE_SYSTEM_ARCH : " ${CMAKE_SYSTEM_ARCH})
message(STATUS "*******************************************************")