| #---------------------------------------------------------------------------- |
| # Copyright (c) 2021 Arm Limited. All rights reserved. |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| #---------------------------------------------------------------------------- |
| |
| # CMake configuration file for peripheral memory map for simple platform. This is a stripped down |
| # version of Arm Corstone-300 platform with minimal peripherals to be able to use Ethos-U55. However, |
| # for ease of integration with Arm FastModel Tools, it uses PL011 as the UART component instead of |
| # the CMSDK UART block used by the MPS3 FPGA and FVP implementations. |
| ################################################################################################### |
| # Mem sizes # |
| ################################################################################################### |
| set(ITCM_SIZE "0x00080000" CACHE STRING "ITCM size: 512 kiB") |
| set(DTCM_BLK_SIZE "0x00020000" CACHE STRING "DTCM size: 128 kiB, 4 banks") |
| set(BRAM_SIZE "0x00200000" CACHE STRING "BRAM size: 2 MiB") |
| set(ISRAM0_SIZE "0x00200000" CACHE STRING "ISRAM0 size: 2 MiB") |
| set(ISRAM1_SIZE "0x00200000" CACHE STRING "ISRAM1 size: 2 MiB") |
| set(DDR4_BLK_SIZE "0x10000000" CACHE STRING "DDR4 block size: 256 MiB") |
| |
| ################################################################################################### |
| # Base addresses for memory regions # |
| ################################################################################################### |
| set(ITCM_BASE_NS "0x00000000" CACHE STRING "Instruction TCM Non-Secure base address") |
| set(BRAM_BASE_NS "0x01000000" CACHE STRING "CODE SRAM Non-Secure base address") |
| set(DTCM0_BASE_NS "0x20000000" CACHE STRING "Data TCM block 0 Non-Secure base address") |
| set(DTCM1_BASE_NS "0x20020000" CACHE STRING "Data TCM block 1 Non-Secure base address") |
| set(DTCM2_BASE_NS "0x20040000" CACHE STRING "Data TCM block 2 Non-Secure base address") |
| set(DTCM3_BASE_NS "0x20060000" CACHE STRING "Data TCM block 3 Non-Secure base address") |
| set(ISRAM0_BASE_NS "0x21000000" CACHE STRING "Internal SRAM Area Non-Secure base address") |
| set(ISRAM1_BASE_NS "0x21200000" CACHE STRING "Internal SRAM Area Non-Secure base address") |
| set(QSPI_SRAM_BASE_NS "0x28000000" CACHE STRING "QSPI SRAM Non-Secure base address") |
| set(DDR4_BLK0_BASE_NS "0x60000000" CACHE STRING "DDR4 block 0 Non-Secure base address") |
| set(DDR4_BLK1_BASE_NS "0x80000000" CACHE STRING "DDR4 block 1 Non-Secure base address") |
| set(DDR4_BLK2_BASE_NS "0xA0000000" CACHE STRING "DDR4 block 2 Non-Secure base address") |
| set(DDR4_BLK3_BASE_NS "0xC0000000" CACHE STRING "DDR4 block 3 Non-Secure base address") |
| |
| set(ITCM_BASE_S "0x10000000" CACHE STRING "Instruction TCM Secure base address") |
| set(BRAM_BASE_S "0x11000000" CACHE STRING "CODE SRAM Secure base address") |
| set(DTCM0_BASE_S "0x30000000" CACHE STRING "Data TCM block 0 Secure base address") |
| set(DTCM1_BASE_S "0x30020000" CACHE STRING "Data TCM block 1 Secure base address") |
| set(DTCM2_BASE_S "0x30040000" CACHE STRING "Data TCM block 2 Secure base address") |
| set(DTCM3_BASE_S "0x30060000" CACHE STRING "Data TCM block 3 Secure base address") |
| set(ISRAM0_BASE_S "0x31000000" CACHE STRING "Internal SRAM Area Secure base address") |
| set(ISRAM1_BASE_S "0x31200000" CACHE STRING "Internal SRAM Area Secure base address") |
| set(DDR4_BLK0_BASE_S "0x70000000" CACHE STRING "DDR4 block 0 Secure base address") |
| set(DDR4_BLK1_BASE_S "0x90000000" CACHE STRING "DDR4 block 1 Secure base address") |
| set(DDR4_BLK2_BASE_S "0xB0000000" CACHE STRING "DDR4 block 2 Secure base address") |
| set(DDR4_BLK3_BASE_S "0xD0000000" CACHE STRING "DDR4 block 3 Secure base address") |
| |
| ################################################################################################### |
| # Application specific config # |
| ################################################################################################### |
| |
| # This parameter is based on the linker/scatter script for simple platform. Do not change this |
| # parameter in isolation. |
| set(DESIGN_NAME "Simple platform" CACHE STRING "Design name") |
| |
| # SRAM size reserved for activation buffers |
| math(EXPR ACTIVATION_BUF_SRAM_SZ "${ISRAM0_SIZE} + ${ISRAM1_SIZE}" OUTPUT_FORMAT HEXADECIMAL) |
| |
| |
| ################################################################################################### |
| # Base addresses # |
| ################################################################################################### |
| set(PL011_UART0_BASE "0x49303000" CACHE STRING "PL011 UART 0 Base Address") |
| |
| if (ETHOS_U_NPU_ENABLED) |
| set(ETHOS_U_NPU_BASE "0x48102000" CACHE STRING "Ethos-U NPU base address") |
| set(ETHOS_U_NPU_TA0_BASE "0x48103000" CACHE STRING "Ethos-U NPU's timing adapter 0 base address") |
| set(ETHOS_U_NPU_TA1_BASE "0x48103200" CACHE STRING "Ethos-U NPU's timing adapter 1 base address") |
| set(SEC_ETHOS_U_NPU_BASE "0x58102000" CACHE STRING "Ethos-U NPU base address") |
| set(SEC_ETHOS_U_NPU_TA0_BASE "0x58103000" CACHE STRING "Ethos-U NPU's timing adapter 0 base address") |
| set(SEC_ETHOS_U_NPU_TA1_BASE "0x58103200" CACHE STRING "Ethos-U NPU's timing adapter 1 base address") |
| endif () |
| |
| ################################################################################################### |
| # IRQ numbers # |
| ################################################################################################### |
| if (ETHOS_U_NPU_ENABLED) |
| set(EthosU_IRQn "56" CACHE STRING "Ethos-U NPU Interrupt") |
| endif () |