MLECO-2919: Restructuring to standardise HAL APIs
* LCD module component created (removed from individual
platform packs).
* retarget.c moved out into its own component that wraps
the uart module. It also have the native stub for
GetLine => paved the way for removing data_acq module
from profiles.
* shortened names for components' dir for npu and ta
* remove peripheral_memmap and peripheral_irqs headers
from platform_drivers.h. There should be no need for
these to be included in the top level now. These should
be private headers.
* cmsis_device moved in as a component.
* Pyenv created by set_up_default_resource.py will also
install packages that CMake's source generator needs.
TODO's:
* Remove timer from profiles (MLECO-3096)
Change-Id: I9d6ea2f4f291788f40a16ed507019563c8d7f205
diff --git a/source/hal/source/components/lcd/CMakeLists.txt b/source/hal/source/components/lcd/CMakeLists.txt
new file mode 100644
index 0000000..7378713
--- /dev/null
+++ b/source/hal/source/components/lcd/CMakeLists.txt
@@ -0,0 +1,90 @@
+#----------------------------------------------------------------------------
+# Copyright (c) 2022 Arm Limited. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#----------------------------------------------------------------------------
+
+#########################################################
+# LCD library #
+#########################################################
+
+cmake_minimum_required(VERSION 3.15.6)
+
+project(lcd_component
+ DESCRIPTION "LCD support library"
+ LANGUAGES C CXX ASM)
+
+# Add top level interface library
+set(LCD_IFACE_TARGET lcd_iface)
+add_library(${LCD_IFACE_TARGET} INTERFACE)
+target_include_directories(${LCD_IFACE_TARGET} INTERFACE include)
+
+# Create static library for MPS3 LCD
+set(LCD_MPS3_COMPONENT_TARGET lcd_mps3)
+add_library(${LCD_MPS3_COMPONENT_TARGET} STATIC)
+
+set(CLCD_CONFIG_BASE "0x4930A000" CACHE STRING "LCD configuration base address")
+
+## Include directories - private
+target_include_directories(${LCD_MPS3_COMPONENT_TARGET}
+ PRIVATE
+ source)
+
+## Component sources
+target_sources(${LCD_MPS3_COMPONENT_TARGET}
+ PRIVATE
+ source/glcd_mps3/glcd_mps3.c
+ source/lcd_img.c)
+
+# Compile definitions
+target_compile_definitions(${LCD_MPS3_COMPONENT_TARGET}
+ PRIVATE
+ CLCD_CONFIG_BASE=${CLCD_CONFIG_BASE})
+
+## Add dependencies
+target_link_libraries(${LCD_MPS3_COMPONENT_TARGET} PUBLIC
+ ${LCD_IFACE_TARGET}
+ log)
+
+# Display status
+message(STATUS "CMAKE_CURRENT_SOURCE_DIR: " ${CMAKE_CURRENT_SOURCE_DIR})
+message(STATUS "*******************************************************")
+message(STATUS "Library : " ${LCD_MPS3_COMPONENT_TARGET})
+message(STATUS "*******************************************************")
+
+# Create static library for LCD Stubs
+set(LCD_STUBS_COMPONENT_TARGET lcd_stubs)
+add_library(${LCD_STUBS_COMPONENT_TARGET} STATIC)
+
+## Include directories - private
+target_include_directories(${LCD_STUBS_COMPONENT_TARGET}
+ PRIVATE
+ source)
+
+## Component sources
+target_sources(${LCD_STUBS_COMPONENT_TARGET}
+ PRIVATE
+ source/glcd_stubs/glcd_stubs.c
+ source/lcd_img.c)
+
+## Add dependencies
+target_link_libraries(${LCD_STUBS_COMPONENT_TARGET} PUBLIC
+ ${LCD_IFACE_TARGET}
+ log)
+
+# Display status
+message(STATUS "CMAKE_CURRENT_SOURCE_DIR: " ${CMAKE_CURRENT_SOURCE_DIR})
+message(STATUS "*******************************************************")
+message(STATUS "Library : " ${LCD_STUBS_COMPONENT_TARGET})
+message(STATUS "*******************************************************")
\ No newline at end of file