MLECO-2919: Restructuring to standardise HAL APIs
* LCD module component created (removed from individual
platform packs).
* retarget.c moved out into its own component that wraps
the uart module. It also have the native stub for
GetLine => paved the way for removing data_acq module
from profiles.
* shortened names for components' dir for npu and ta
* remove peripheral_memmap and peripheral_irqs headers
from platform_drivers.h. There should be no need for
these to be included in the top level now. These should
be private headers.
* cmsis_device moved in as a component.
* Pyenv created by set_up_default_resource.py will also
install packages that CMake's source generator needs.
TODO's:
* Remove timer from profiles (MLECO-3096)
Change-Id: I9d6ea2f4f291788f40a16ed507019563c8d7f205
diff --git a/source/hal/source/platform/mps3/CMakeLists.txt b/source/hal/source/platform/mps3/CMakeLists.txt
new file mode 100644
index 0000000..8bd51dc
--- /dev/null
+++ b/source/hal/source/platform/mps3/CMakeLists.txt
@@ -0,0 +1,138 @@
+#----------------------------------------------------------------------------
+# Copyright (c) 2022 Arm Limited. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#----------------------------------------------------------------------------
+
+#########################################################
+# MPS3 platform support library #
+#########################################################
+
+cmake_minimum_required(VERSION 3.15.6)
+set(PLATFORM_DRIVERS_TARGET platform_drivers)
+project(${PLATFORM_DRIVERS_TARGET}
+ DESCRIPTION "Platform drivers library for MPS3 FPGA/FVP targets"
+ LANGUAGES C CXX ASM)
+
+# 1. We should be cross-compiling (MPS3 taregt only runs Cortex-M targets)
+if (NOT ${CMAKE_CROSSCOMPILING})
+ message(FATAL_ERROR "No ${PLATFORM_DRIVERS_TARGET} support for this target.")
+endif()
+
+# 2. Set the platform cmake descriptor file
+if (NOT DEFINED PLATFORM_CMAKE_DESCRIPTOR_FILE)
+ set(PLATFORM_CMAKE_DESCRIPTOR_FILE
+ cmake/subsystem-profiles/${TARGET_SUBSYSTEM}.cmake
+ CACHE PATH
+ "Platform's CMake descriptor file path")
+endif()
+
+## Include the platform cmake descriptor file
+include(${PLATFORM_CMAKE_DESCRIPTOR_FILE})
+
+# Define target specific base addresses here (before adding the components)
+if (TARGET_SUBSYSTEM STREQUAL sse-300)
+ set(UART0_BASE "0x49303000" CACHE STRING "UART base address")
+ set(UART0_BAUDRATE "115200" CACHE STRING "UART baudrate")
+ set(SYSTEM_CORE_CLOCK "25000000" CACHE STRING "System peripheral clock (Hz)")
+ set(CLCD_CONFIG_BASE "0x4930A000" CACHE STRING "LCD configuration base address")
+endif()
+
+# 3. Generate sources:
+if (NOT DEFINED SOURCE_GEN_DIR)
+ set(SOURCE_GEN_DIR ${CMAKE_BINARY_DIR}/generated/bsp)
+endif()
+
+set(MEM_PROFILE_TEMPLATE ${CMAKE_CURRENT_SOURCE_DIR}/cmake/templates/peripheral_memmap.h.template)
+set(IRQ_PROFILE_TEMPLATE ${CMAKE_CURRENT_SOURCE_DIR}/cmake/templates/peripheral_irqs.h.template)
+set(MEM_REGIONS_TEMPLATE ${CMAKE_CURRENT_SOURCE_DIR}/cmake/templates/mem_regions.h.template)
+
+configure_file("${MEM_PROFILE_TEMPLATE}" "${SOURCE_GEN_DIR}/peripheral_memmap.h")
+configure_file("${IRQ_PROFILE_TEMPLATE}" "${SOURCE_GEN_DIR}/peripheral_irqs.h")
+configure_file("${MEM_REGIONS_TEMPLATE}" "${SOURCE_GEN_DIR}/mem_regions.h")
+
+# Create static library
+add_library(${PLATFORM_DRIVERS_TARGET} STATIC)
+
+## Include directories - private
+target_include_directories(${PLATFORM_DRIVERS_TARGET}
+ PRIVATE
+ source)
+
+## Include directories - public
+target_include_directories(${PLATFORM_DRIVERS_TARGET}
+ PUBLIC
+ include
+ ${SOURCE_GEN_DIR})
+
+## Platform sources
+target_sources(${PLATFORM_DRIVERS_TARGET}
+ PRIVATE
+ source/timer_mps3.c
+ source/platform_drivers.c)
+
+## Compile definitions
+target_compile_definitions(${PLATFORM_DRIVERS_TARGET}
+ PUBLIC
+ ACTIVATION_BUF_SRAM_SZ=${ACTIVATION_BUF_SRAM_SZ})
+
+## Directory for additional components required by MPS3:
+if (NOT DEFINED COMPONENTS_DIR)
+ set(COMPONENTS_DIR ${CMAKE_CURRENT_SOURCE_DIR}/../../components)
+endif()
+
+## Platform component: cmsis_device (provides generic Cortex-M start up library)
+add_subdirectory(${COMPONENTS_DIR}/cmsis_device ${CMAKE_BINARY_DIR}/cmsis_device)
+
+## Platform component: stdout
+set(STDOUT_RETARGET ON CACHE BOOL "Retarget stdout/err to UART")
+add_subdirectory(${COMPONENTS_DIR}/stdout ${CMAKE_BINARY_DIR}/stdout)
+
+## Platform component: lcd
+add_subdirectory(${COMPONENTS_DIR}/lcd ${CMAKE_BINARY_DIR}/lcd)
+
+# Add dependencies:
+target_link_libraries(${PLATFORM_DRIVERS_TARGET} PUBLIC
+ log
+ cmsis_device
+ lcd_mps3
+ $<IF:$<BOOL:STDOUT_RETARGET>,stdout_retarget_cmsdk,stdout>)
+
+# If Ethos-U is enabled, we need the driver library too
+if (ETHOS_U_NPU_ENABLED)
+
+ ## Platform component: Ethos-U initialization
+ add_subdirectory(${COMPONENTS_DIR}/npu ${CMAKE_BINARY_DIR}/npu)
+
+ target_link_libraries(${PLATFORM_DRIVERS_TARGET}
+ PUBLIC
+ ethos_u_npu)
+
+ if (ETHOS_U_NPU_TIMING_ADAPTER_ENABLED)
+ ## Platform component: Ethos-U timing adapter initialization
+ add_subdirectory(${COMPONENTS_DIR}/npu_ta ${CMAKE_BINARY_DIR}/npu_ta)
+
+ target_link_libraries(${PLATFORM_DRIVERS_TARGET}
+ PUBLIC
+ ethos_u_ta)
+ endif()
+
+endif()
+
+# 5. Display status:
+message(STATUS "CMAKE_CURRENT_SOURCE_DIR: " ${CMAKE_CURRENT_SOURCE_DIR})
+message(STATUS "*******************************************************")
+message(STATUS "Library : " ${PLATFORM_DRIVERS_TARGET})
+message(STATUS "CMAKE_SYSTEM_PROCESSOR : " ${CMAKE_SYSTEM_PROCESSOR})
+message(STATUS "*******************************************************")