MLECO-2984: Refactor components
* Use UART component from Ethos-U core-platform
* Components as cmake project
Change-Id: I053f3a59800abc20216e6a4df8555db357e3f21d
Signed-off-by: Isabella Gottardi <isabella.gottardi@arm.com>
diff --git a/source/hal/components/ethosu_npu_init/CMakeLists.txt b/source/hal/components/ethosu_npu_init/CMakeLists.txt
new file mode 100644
index 0000000..57eef61
--- /dev/null
+++ b/source/hal/components/ethosu_npu_init/CMakeLists.txt
@@ -0,0 +1,98 @@
+#----------------------------------------------------------------------------
+# Copyright (c) 2022 Arm Limited. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#----------------------------------------------------------------------------
+
+#########################################################
+# Ethos-U NPU initialization library #
+#########################################################
+
+cmake_minimum_required(VERSION 3.15.6)
+set(ETHOS_U_NPU_INIT_COMPONENT ethosu_npu_init_component)
+project(${ETHOS_U_NPU_INIT_COMPONENT}
+ DESCRIPTION "Ethos-U NPU initialization library"
+ LANGUAGES C CXX ASM)
+
+if (NOT DEFINED ETHOS_U_NPU_DRIVER_SRC_PATH)
+ message(FATAL_ERROR "ETHOS_U_NPU_DRIVER_SRC_PATH should"
+ " be defined when ETHOS_U_NPU_ENABLED=${ETHOS_U_NPU_ENABLED}")
+endif()
+
+# For the driver, we need to provide the CMSIS_PATH variable
+set(CMSIS_PATH ${CMSIS_SRC_PATH} CACHE PATH "Path to CMSIS directory")
+add_subdirectory(${ETHOS_U_NPU_DRIVER_SRC_PATH} ${CMAKE_BINARY_DIR}/ethos-u-driver)
+
+# Create static library
+add_library(${ETHOS_U_NPU_INIT_COMPONENT} STATIC)
+
+## Include directories - public
+target_include_directories(${ETHOS_U_NPU_INIT_COMPONENT}
+ PUBLIC
+ include
+ ${SOURCE_GEN_DIR})
+
+## Component sources
+target_sources(${ETHOS_U_NPU_INIT_COMPONENT}
+ PRIVATE
+ ethosu_npu_init.c)
+
+## Add dependencies:
+target_link_libraries(${ETHOS_U_NPU_INIT_COMPONENT} PUBLIC
+ cmsis_device
+ ethosu_core_driver
+ log)
+
+## Memory mode target definition
+if (NOT DEFINED ETHOS_U_NPU_ID)
+ set(ETHOS_U_NPU_ID U55)
+endif()
+
+if (NOT DEFINED ETHOS_U_NPU_MEMORY_MODE)
+ set(ETHOS_U_NPU_MEMORY_MODE Shared_Sram)
+endif()
+
+if (ETHOS_U_NPU_MEMORY_MODE STREQUAL Sram_Only)
+ if (ETHOS_U_NPU_ID STREQUAL U55)
+ set(ETHOS_U_NPU_MEMORY_MODE_FLAG "-DETHOS_U_NPU_MEMORY_MODE=ETHOS_U_NPU_MEM_MODE_SRAM_ONLY")
+ else ()
+ message(FATAL_ERROR "Non compatible Ethos-U NPU memory mode and processor ${ETHOS_U_NPU_MEMORY_MODE} - ${ETHOS_U_NPU_ID}. `sram_only` can be used only for Ethos-U55.")
+ endif ()
+
+elseif (ETHOS_U_NPU_MEMORY_MODE STREQUAL Shared_Sram)
+ # Shared Sram can be used for Ethos-U55 and Ethos-U65
+ set(ETHOS_U_NPU_MEMORY_MODE_FLAG "-DETHOS_U_NPU_MEMORY_MODE=ETHOS_U_NPU_MEMORY_MODE_SHARED_SRAM")
+
+elseif (ETHOS_U_NPU_MEMORY_MODE STREQUAL Dedicated_Sram)
+ # Dedicated Sram is used only for Ethos-U65
+ if (ETHOS_U_NPU_ID STREQUAL U65)
+ list(APPEND ETHOS_U_NPU_MEMORY_MODE_FLAG "-DETHOS_U_NPU_MEMORY_MODE=ETHOS_U_NPU_MEMORY_MODE_DEDICATED_SRAM" "-DETHOS_U_NPU_CACHE_SIZE=${ETHOS_U_NPU_CACHE_SIZE}")
+ else ()
+ message(FATAL_ERROR "Non compatible Ethos-U NPU memory mode and processor ${ETHOS_U_NPU_MEMORY_MODE} - ${ETHOS_U_NPU_ID}. `dedicated_sram` can be used only for Ethos-U65.")
+ endif ()
+
+else ()
+ message(FATAL_ERROR "Non compatible Ethos-U NPU memory mode ${ETHOS_U_NPU_MEMORY_MODE}")
+
+endif ()
+
+target_compile_definitions(${ETHOS_U_NPU_INIT_COMPONENT}
+ PUBLIC
+ ${ETHOS_U_NPU_MEMORY_MODE_FLAG})
+
+# Display status
+message(STATUS "CMAKE_CURRENT_SOURCE_DIR: " ${CMAKE_CURRENT_SOURCE_DIR})
+message(STATUS "*******************************************************")
+message(STATUS "Library : " ${ETHOS_U_NPU_INIT_COMPONENT})
+message(STATUS "*******************************************************")
diff --git a/source/hal/components/ethosu_npu_init/include/ethosu_mem_config.h b/source/hal/components/ethosu_npu_init/include/ethosu_mem_config.h
new file mode 100644
index 0000000..aa0cfda
--- /dev/null
+++ b/source/hal/components/ethosu_npu_init/include/ethosu_mem_config.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2022 Arm Limited. All rights reserved.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ETHOS_U_NPU_MEM_CONFIG_H
+#define ETHOS_U_NPU_MEM_CONFIG_H
+
+#define ETHOS_U_NPU_MEMORY_MODE_SRAM_ONLY 0
+#define ETHOS_U_NPU_MEMORY_MODE_SHARED_SRAM 1
+#define ETHOS_U_NPU_MEMORY_MODE_DEDICATED_SRAM 2
+
+#define ETHOS_U_MEM_BYTE_ALIGNMENT 16
+
+#ifndef ETHOS_U_NPU_MEMORY_MODE
+ #define ETHOS_U_NPU_MEMORY_MODE ETHOS_U_MEMORY_MODE_SHARED_SRAM
+#endif /* ETHOS_U_NPU_MEMORY_MODE */
+
+#if (ETHOS_U_NPU_MEMORY_MODE==ETHOS_U_NPU_MEMORY_MODE_DEDICATED_SRAM)
+ #ifndef ETHOS_U_NPU_CACHE_SIZE
+ #define ETHOS_U_CACHE_BUF_SZ (393216U) /* See vela doc for reference */
+ #else
+ #define ETHOS_U_CACHE_BUF_SZ ETHOS_U_NPU_CACHE_SIZE
+ #endif /* ETHOS_U_NPU_CACHE_SIZE */
+#else
+ #define ETHOS_U_CACHE_BUF_SZ (0U)
+#endif /* CACHE_BUF_SZ */
+
+/**
+ * Activation buffer aka tensor arena section name
+ * We have to place the tensor arena in different region based on the memory config.
+ **/
+#if (ETHOS_U_NPU_MEMORY_MODE==ETHOS_U_NPU_MEMORY_MODE_SHARED_SRAM)
+ #define ACTIVATION_BUF_SECTION section(".bss.NoInit.activation_buf_sram")
+ #define ACTIVATION_BUF_SECTION_NAME ("SRAM")
+#elif (ETHOS_U_NPU_MEMORY_MODE==ETHOS_U_NPU_MEMORY_MODE_SRAM_ONLY)
+ #define ACTIVATION_BUF_SECTION section(".bss.NoInit.activation_buf_sram")
+ #define ACTIVATION_BUF_SECTION_NAME ("SRAM")
+#elif (ETHOS_U_NPU_MEMORY_MODE==ETHOS_U_NPU_MEMORY_MODE_DEDICATED_SRAM)
+ #define ACTIVATION_BUF_SECTION section("activation_buf_dram")
+ #define CACHE_BUF_SECTION section(".bss.NoInit.ethos_u_cache")
+ #define ACTIVATION_BUF_SECTION_NAME ("DDR/DRAM")
+ #define CACHE_BUF_ATTRIBUTE __attribute__((aligned(ETHOS_U_MEM_BYTE_ALIGNMENT), CACHE_BUF_SECTION))
+#endif
+
+#endif /* ETHOS_U_NPU_MEM_CONFIG_H */
diff --git a/source/hal/components/ethosu_ta_init/CMakeLists.txt b/source/hal/components/ethosu_ta_init/CMakeLists.txt
new file mode 100644
index 0000000..b5f94c1
--- /dev/null
+++ b/source/hal/components/ethosu_ta_init/CMakeLists.txt
@@ -0,0 +1,67 @@
+#----------------------------------------------------------------------------
+# Copyright (c) 2022 Arm Limited. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#----------------------------------------------------------------------------
+
+#########################################################
+# Ethos-U NPU timing adapter initialization library #
+#########################################################
+
+cmake_minimum_required(VERSION 3.15.6)
+set(ETHOS_U_NPU_TA_COMPONENT ethosu_ta_init_component)
+project(${ETHOS_U_NPU_TA_COMPONENT}
+ DESCRIPTION "Ethos-U NPU timing adapter initialization library"
+ LANGUAGES C CXX ASM)
+
+# Checks
+## If a TA config file is provided, we generate a settings file
+if (DEFINED TA_CONFIG_FILE)
+ include(${TA_CONFIG_FILE})
+ set(TA_SETTINGS_TEMPLATE ${CMAKE_CURRENT_SOURCE_DIR}/cmake/templates/timing_adapter_settings.template)
+ configure_file("${TA_SETTINGS_TEMPLATE}" "${SOURCE_GEN_DIR}/timing_adapter_settings.h")
+endif()
+
+## Timing adapter Source path check
+if (NOT DEFINED ETHOS_U_NPU_TIMING_ADAPTER_SRC_PATH)
+ message(FATAL_ERROR "ETHOS_U_NPU_TIMING_ADAPTER_SRC_PATH should"
+ " be defined when ETHOS_U_NPU_ENABLED=${ETHOS_U_NPU_ENABLED}")
+endif()
+
+add_subdirectory(${ETHOS_U_NPU_TIMING_ADAPTER_SRC_PATH} ${CMAKE_BINARY_DIR}/timing_adapter)
+
+# Create static library
+add_library(${ETHOS_U_NPU_TA_COMPONENT} STATIC)
+
+## Include directories - public
+target_include_directories(${ETHOS_U_NPU_TA_COMPONENT}
+ PUBLIC
+ include
+ ${SOURCE_GEN_DIR})
+
+## Component sources
+target_sources(${ETHOS_U_NPU_TA_COMPONENT}
+ PRIVATE
+ ethosu_ta_init.c)
+
+## Add dependencies
+target_link_libraries(${ETHOS_U_NPU_TA_COMPONENT} PUBLIC
+ timing_adapter
+ log)
+
+# Display status
+message(STATUS "CMAKE_CURRENT_SOURCE_DIR: " ${CMAKE_CURRENT_SOURCE_DIR})
+message(STATUS "*******************************************************")
+message(STATUS "Library : " ${ETHOS_U_NPU_TA_COMPONENT})
+message(STATUS "*******************************************************")
diff --git a/source/hal/components/ethosu_ta_init/cmake/templates/timing_adapter_settings.template b/source/hal/components/ethosu_ta_init/cmake/templates/timing_adapter_settings.template
new file mode 100644
index 0000000..5b6c43d
--- /dev/null
+++ b/source/hal/components/ethosu_ta_init/cmake/templates/timing_adapter_settings.template
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2021 Arm Limited. All rights reserved.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+// Auto-generated file
+// ** DO NOT EDIT **
+
+#ifndef TIMING_ADAPTER_SETTINGS_H
+#define TIMING_ADAPTER_SETTINGS_H
+
+#cmakedefine TA0_BASE (@TA0_BASE@)
+#cmakedefine TA1_BASE (@TA1_BASE@)
+
+/* Timing adapter settings for AXI0 */
+#if defined(TA0_BASE)
+
+#define TA0_MAXR (@TA0_MAXR@)
+#define TA0_MAXW (@TA0_MAXW@)
+#define TA0_MAXRW (@TA0_MAXRW@)
+#define TA0_RLATENCY (@TA0_RLATENCY@)
+#define TA0_WLATENCY (@TA0_WLATENCY@)
+#define TA0_PULSE_ON (@TA0_PULSE_ON@)
+#define TA0_PULSE_OFF (@TA0_PULSE_OFF@)
+#define TA0_BWCAP (@TA0_BWCAP@)
+#define TA0_PERFCTRL (@TA0_PERFCTRL@)
+#define TA0_PERFCNT (@TA0_PERFCNT@)
+#define TA0_MODE (@TA0_MODE@)
+#define TA0_HISTBIN (@TA0_HISTBIN@)
+#define TA0_HISTCNT (@TA0_HISTCNT@)
+
+#endif /* defined(TA0_BASE) */
+
+/* Timing adapter settings for AXI1 */
+#if defined(TA1_BASE)
+
+#define TA1_MAXR (@TA1_MAXR@)
+#define TA1_MAXW (@TA1_MAXW@)
+#define TA1_MAXRW (@TA1_MAXRW@)
+#define TA1_RLATENCY (@TA1_RLATENCY@)
+#define TA1_WLATENCY (@TA1_WLATENCY@)
+#define TA1_PULSE_ON (@TA1_PULSE_ON@)
+#define TA1_PULSE_OFF (@TA1_PULSE_OFF@)
+#define TA1_BWCAP (@TA1_BWCAP@)
+#define TA1_PERFCTRL (@TA1_PERFCTRL@)
+#define TA1_PERFCNT (@TA1_PERFCNT@)
+#define TA1_MODE (@TA1_MODE@)
+#define TA1_HISTBIN (@TA1_HISTBIN@)
+#define TA1_HISTCNT (@TA1_HISTCNT@)
+
+#endif /* defined(TA1_BASE) */
+
+#endif /* TIMING_ADAPTER_SETTINGS_H */
diff --git a/source/hal/components/ethosu_ta_init/ethosu_ta_init.c b/source/hal/components/ethosu_ta_init/ethosu_ta_init.c
index 26eeb5c..323ab73 100644
--- a/source/hal/components/ethosu_ta_init/ethosu_ta_init.c
+++ b/source/hal/components/ethosu_ta_init/ethosu_ta_init.c
@@ -19,8 +19,6 @@
#include "log_macros.h" /* Logging functions */
-#if defined(TIMING_ADAPTER_AVAILABLE)
-
#include "timing_adapter.h" /* Arm Ethos-U timing adapter driver header */
#include "timing_adapter_settings.h" /* Arm Ethos-U timing adapter settings */
@@ -82,5 +80,3 @@
return 0;
}
-
-#endif /* TIMING_ADAPTER_AVAILABLE */
diff --git a/source/hal/components/ethosu_ta_init/include/ethosu_ta_init.h b/source/hal/components/ethosu_ta_init/include/ethosu_ta_init.h
index 2ab7fb2..7e6df6c 100644
--- a/source/hal/components/ethosu_ta_init/include/ethosu_ta_init.h
+++ b/source/hal/components/ethosu_ta_init/include/ethosu_ta_init.h
@@ -17,14 +17,10 @@
#ifndef ETHOS_U_TA_INIT_H
#define ETHOS_U_TA_INIT_H
-#if defined(ARM_NPU) && defined(TIMING_ADAPTER_AVAILABLE)
-
/**
* @brief Initialises the Arm Ethos-U NPU timing adapter
* @return 0 if successful, error code otherwise
**/
int arm_ethosu_timing_adapter_init(void);
-#endif /* ARM_NPU && TIMING_ADAPTER_AVAILABLE */
-
#endif /* ETHOS_U_TA_INIT_H */
diff --git a/source/hal/components/lcd_mps3/glcd_mps3.c b/source/hal/components/lcd_mps3/glcd_mps3.c
deleted file mode 100644
index 55a6575..0000000
--- a/source/hal/components/lcd_mps3/glcd_mps3.c
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * Copyright (c) 2021-2022 Arm Limited. All rights reserved.
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "glcd_mps3.h"
-
-#include "log_macros.h"
-#include "font_9x15_h.h"
-#include "smm_mps3.h"
-
-/*-------------- CLCD Controller Internal Register addresses ----------------*/
-#define CHAR_COM ((volatile unsigned int *)(CLCD_CONFIG_BASE + 0x000))
-#define CHAR_DAT ((volatile unsigned int *)(CLCD_CONFIG_BASE + 0x004))
-#define CHAR_RD ((volatile unsigned int *)(CLCD_CONFIG_BASE + 0x008))
-#define CHAR_RAW ((volatile unsigned int *)(CLCD_CONFIG_BASE + 0x00C))
-#define CHAR_MASK ((volatile unsigned int *)(CLCD_CONFIG_BASE + 0x010))
-#define CHAR_STAT ((volatile unsigned int *)(CLCD_CONFIG_BASE + 0x014))
-#define CHAR_MISC ((volatile unsigned int *)(CLCD_CONFIG_BASE + 0x04C))
-
-/*--------------- Graphic LCD interface hardware definitions -----------------*/
-/* Pin CS setting to 0 or 1 */
-#define LCD_CS(x) ((x) ? (*CHAR_MISC |= CLCD_CS_Msk) : (*CHAR_MISC &= ~CLCD_CS_Msk))
-#define LCD_RST(x) ((x) ? (*CHAR_MISC |= CLCD_RESET_Msk) : (*CHAR_MISC &= ~CLCD_RESET_Msk))
-#define LCD_BL(x) ((x) ? (*CHAR_MISC |= CLCD_BL_Msk) : (*CHAR_MISC &= ~CLCD_BL_Msk))
-
-#define BG_COLOR 0 /* Background colour */
-#define TXT_COLOR 1 /* Text colour */
-
-/**
-* Text and background colour
-*/
-static volatile unsigned short Color[2] = {Black, White};
-
-/**
- * @brief Delay in while loop cycles.
- * @param[in] cnt Number of while cycles to delay.
- **/
-static void delay (int cnt)
-{
- cnt <<= DELAY_2N;
- while (cnt != 0) {
- --cnt;
- }
-}
-
-/**
- * @brief Write a command the LCD controller.
- * @param[in] cmd Command to be written.
- */
-static __inline void wr_cmd(unsigned char cmd)
-{
- LCD_CS(0);
- *CHAR_COM = cmd;
- LCD_CS(1);
-}
-
-/**
- * @brief Start of data writing to the LCD controller.
- */
-static __inline void wr_dat_start (void)
-{
- LCD_CS(0);
-}
-
-/**
- * @brief Stop of data writing to the LCD controller.
- */
-static __inline void wr_dat_stop (void)
-{
- LCD_CS(1);
-}
-
-/**
- * @brief Data writing to the LCD controller.
- * @param[in] dat Data to be written.
- */
-static __inline void wr_dat_only(unsigned short dat)
-{
- *CHAR_DAT = (dat >> 8); /* Write D8..D15 */
- *CHAR_DAT = (dat & 0xFF); /* Write D0..D7 */
-}
-
-/**
- * @brief Write a value to the to LCD register.
- * @param[in] reg Register to be written.
- * @param[in] val Value to write to the register.
- */
-static __inline void wr_reg(unsigned char reg, unsigned short val)
-{
- LCD_CS(0);
- *CHAR_COM = reg;
- wr_dat_only(val);
- LCD_CS(1);
-}
-
-/**
- * @brief Converts a gray value to RGB565 representation.
- * @param[in] src_uchar Pointer to the source pixel.
- * @return 16 bit RGB565 value.
- */
-static inline uint16_t _GLCD_Gray8_to_RGB565(uint8_t *src_uchar)
-{
- uint16_t val_r = (*src_uchar >> 3);
- uint16_t val_g = (*src_uchar >> 2);
- return ((val_r << 11) | (val_g << 5) | val_r);
-}
-
-/**
- * @brief Converts an RGB888 value to RGB565 representation.
- * @param[in] src_uchar Pointer to the source pixel for R (assumed to
- * be RGB format).
- * @return 16 bit RGB565 value.
- */
-static inline uint16_t _GLCD_RGB888_to_RGB565(uint8_t *src_uchar)
-{
- uint16_t val_r = (*src_uchar >> 3) & 0x1F;
- uint16_t val_g = (*(src_uchar+1) >> 2) & 0x3F;
- uint16_t val_b = (*(src_uchar+2) >> 3) & 0x1F;
- return ((val_r << 11) | (val_g << 5) | val_b);
-}
-
-/* Helper typedef to encapsulate the colour conversion function
- * signatures */
-typedef uint16_t (* std_clr_2_lcd_clr_fn)(uint8_t *src_uchar);
-
-void GLCD_SetWindow(unsigned int x, unsigned int y, unsigned int w, unsigned int h) {
- unsigned int xe, ye;
-
- xe = x+w-1;
- ye = y+h-1;
-
- wr_reg(0x02, x >> 8); /* Column address start MSB */
- wr_reg(0x03, x & 0xFF); /* Column address start LSB */
- wr_reg(0x04, xe >> 8); /* Column address end MSB */
- wr_reg(0x05, xe & 0xFF); /* Column address end LSB */
-
- wr_reg(0x06, y >> 8); /* Row address start MSB */
- wr_reg(0x07, y & 0xFF); /* Row address start LSB */
- wr_reg(0x08, ye >> 8); /* Row address end MSB */
- wr_reg(0x09, ye & 0xFF); /* Row address end LSB */
-}
-
-void GLCD_WindowMax(void)
-{
- GLCD_SetWindow (0, 0, GLCD_WIDTH, GLCD_HEIGHT);
-}
-
-void GLCD_SetTextColor(unsigned short color)
-{
- Color[TXT_COLOR] = color;
-}
-
-void GLCD_SetBackColor(unsigned short color)
-{
- Color[BG_COLOR] = color;
-}
-
-void GLCD_Clear(unsigned short color)
-{
- unsigned int i;
-
- GLCD_WindowMax();
- wr_cmd(0x22);
- wr_dat_start();
-
- for(i = 0; i < (GLCD_WIDTH*GLCD_HEIGHT); ++i) {
- wr_dat_only(color);
- }
- wr_dat_stop();
-}
-
-
-void GLCD_DrawChar(
- unsigned int x, unsigned int y,
- unsigned int cw, unsigned int ch,
- unsigned char *c)
-{
- unsigned int i, j, k, pixs;
-
- /* Sanity check: out of bounds? */
- if ((x + cw) > GLCD_WIDTH || (y + ch) > GLCD_HEIGHT) {
- return;
- }
-
- GLCD_SetWindow(x, y, cw, ch);
-
- wr_cmd(0x22);
- wr_dat_start();
-
- k = (cw + 7)/8;
-
- if (k == 1) {
- for (j = 0; j < ch; ++j) {
- pixs = *(unsigned char *)c;
- c += 1;
-
- for (i = 0; i < cw; ++i) {
- wr_dat_only (Color[(pixs >> i) & 1]);
- }
- }
- }
- else if (k == 2) {
- for (j = 0; j < ch; ++j) {
- pixs = *(unsigned short *)c;
- c += 2;
-
- for (i = 0; i < cw; ++i) {
- wr_dat_only (Color[(pixs >> i) & 1]);
- }
- }
- }
- wr_dat_stop();
-}
-
-void GLCD_DisplayChar(
- unsigned int ln, unsigned int col,
- unsigned char fi, unsigned char c)
-{
- c -= 32;
- switch (fi) {
- case 0: /* Font 9 x 15. */
- GLCD_DrawChar(col * 9, ln * 15, 9, 15,
- (unsigned char *)&Font_9x15_h[c * 15]);
- break;
- }
-}
-
-void GLCD_DisplayString(
- unsigned int ln, unsigned int col,
- unsigned char fi, char *s)
-{
- while (*s) {
- GLCD_DisplayChar(ln, col++, fi, *s++);
- }
-}
-
-
-
-void GLCD_ClearLn(unsigned int ln, unsigned char fi)
-{
- unsigned char i;
- char buf[60];
-
- GLCD_WindowMax();
- switch (fi) {
- case 0: /* Font 9x15*/
- for (i = 0; i < (GLCD_WIDTH+8)/9; ++i) {
- buf[i] = ' ';
- }
- buf[i+1] = 0;
- break;
- }
- GLCD_DisplayString (ln, 0, fi, buf);
-}
-
-void GLCD_Bitmap(unsigned int x, unsigned int y,
- unsigned int w, unsigned int h,
- unsigned short *bitmap)
-{
- unsigned int i;
- unsigned short *bitmap_ptr = bitmap;
-
- GLCD_SetWindow (x, y, w, h);
-
- wr_cmd(0x22);
- wr_dat_start();
-
- for (i = 0; i < (w*h); ++i) {
- wr_dat_only (bitmap_ptr[i]);
- }
- wr_dat_stop();
-}
-
-void GLCD_Image(const void *data, const uint32_t width,
- const uint32_t height, const uint32_t channels,
- const uint32_t pos_x, const uint32_t pos_y,
- const uint32_t downsample_factor)
-{
- uint32_t i, j = 0; /* for loops */
- const uint32_t x_incr = channels * downsample_factor; /* stride. */
- const uint32_t y_incr = channels * width * (downsample_factor - 1); /* skip rows. */
- uint8_t* src_unsigned = (uint8_t *)data; /* temporary pointer. */
- std_clr_2_lcd_clr_fn cvt_clr_fn = 0; /* colour conversion function. */
-
- /* Based on number of channels, we decide which of the above functions to use. */
- switch (channels) {
- case 1:
- cvt_clr_fn = _GLCD_Gray8_to_RGB565;
- break;
-
- case 3:
- cvt_clr_fn = _GLCD_RGB888_to_RGB565;
- break;
-
- default:
- printf_err("number of channels not supported by display\n");
- return;
- }
-
- /* Set the window position expected. Note: this is integer div. */
- GLCD_SetWindow(pos_x, pos_y,
- width/downsample_factor, height/downsample_factor);
- wr_cmd(0x22);
- wr_dat_start();
-
- /* Loop over the image. */
- for (j = height; j != 0; j -= downsample_factor) {
- for (i = width; i != 0; i -= downsample_factor) {
- wr_dat_only(cvt_clr_fn(src_unsigned));
- src_unsigned += x_incr;
- }
-
- /* Skip rows if needed. */
- src_unsigned += y_incr;
- }
-
- wr_dat_stop();
-}
-
-void GLCD_Box(
- unsigned int x, unsigned int y,
- unsigned int w, unsigned int h,
- unsigned short color)
-{
- unsigned int i;
-
- GLCD_SetWindow (x, y, w, h);
-
- wr_cmd(0x22);
- wr_dat_start();
- for(i = 0; i < (w*h); ++i){
- wr_dat_only (color);
- }
- wr_dat_stop();
-}
-
-
-void GLCD_Initialize (void)
-{
- /* CLCD screen setup (Default CLCD screen interface state) ------------- */
- LCD_CS(1); /* deassert nCS0. */
- LCD_RST(1); /* deassert Reset. */
- LCD_BL(0); /* switch off backlight. */
-
- /* Reset CLCD screen --------------------------------------------------- */
- LCD_RST(0); /* assert Reset. */
- delay(1);
- LCD_RST(1); /* deassert Reset. */
- delay(10);
-
- /* Driving ability settings ----------------------------------------------*/
- wr_reg(0xEA, 0x00); /* Power control internal used (1). */
- wr_reg(0xEB, 0x20); /* Power control internal used (2). */
- wr_reg(0xEC, 0x0C); /* Source control internal used (1). */
- wr_reg(0xED, 0xC7); /* Source control internal used (2). */
- wr_reg(0xE8, 0x38); /* Source output period Normal mode. */
- wr_reg(0xE9, 0x10); /* Source output period Idle mode. */
- wr_reg(0xF1, 0x01); /* RGB 18-bit interface ;0x0110. */
- wr_reg(0xF2, 0x10);
-
- /* Adjust the Gamma Curve ------------------------------------------------*/
- wr_reg(0x40, 0x01);
- wr_reg(0x41, 0x00);
- wr_reg(0x42, 0x00);
- wr_reg(0x43, 0x10);
- wr_reg(0x44, 0x0E);
- wr_reg(0x45, 0x24);
- wr_reg(0x46, 0x04);
- wr_reg(0x47, 0x50);
- wr_reg(0x48, 0x02);
- wr_reg(0x49, 0x13);
- wr_reg(0x4A, 0x19);
- wr_reg(0x4B, 0x19);
- wr_reg(0x4C, 0x16);
-
- wr_reg(0x50, 0x1B);
- wr_reg(0x51, 0x31);
- wr_reg(0x52, 0x2F);
- wr_reg(0x53, 0x3F);
- wr_reg(0x54, 0x3F);
- wr_reg(0x55, 0x3E);
- wr_reg(0x56, 0x2F);
- wr_reg(0x57, 0x7B);
- wr_reg(0x58, 0x09);
- wr_reg(0x59, 0x06);
- wr_reg(0x5A, 0x06);
- wr_reg(0x5B, 0x0C);
- wr_reg(0x5C, 0x1D);
- wr_reg(0x5D, 0xCC);
-
- /* Power voltage setting -------------------------------------------------*/
- wr_reg(0x1B, 0x1B);
- wr_reg(0x1A, 0x01);
- wr_reg(0x24, 0x2F);
- wr_reg(0x25, 0x57);
- wr_reg(0x23, 0x88);
-
- /* Power on setting ------------------------------------------------------*/
- wr_reg(0x18, 0x36); /* Internal oscillator frequency adj. */
- wr_reg(0x19, 0x01); /* Enable internal oscillator. */
- wr_reg(0x01, 0x00); /* Normal mode, no scroll. */
- wr_reg(0x1F, 0x88); /* Power control 6 - DDVDH Off. */
- delay(20);
- wr_reg(0x1F, 0x82); /* Power control 6 - Step-up: 3 x VCI. */
- delay(5);
- wr_reg(0x1F, 0x92); /* Power control 6 - Step-up: On. */
- delay(5);
- wr_reg(0x1F, 0xD2); /* Power control 6 - VCOML active. */
- delay(5);
-
- /* Color selection -------------------------------------------------------*/
- wr_reg(0x17, 0x55); /* RGB, System interface: 16 Bit/Pixel. */
- wr_reg(0x00, 0x00); /* Scrolling off, no standby. */
-
- /* Interface config ------------------------------------------------------*/
- wr_reg(0x2F, 0x11); /* LCD Drive: 1-line inversion. */
- wr_reg(0x31, 0x00);
- wr_reg(0x32, 0x00); /* DPL=0, HSPL=0, VSPL=0, EPL=0. */
-
- /* Display on setting ----------------------------------------------------*/
- wr_reg(0x28, 0x38); /* PT(0,0) active, VGL/VGL. */
- delay(20);
- wr_reg(0x28, 0x3C); /* Display active, VGL/VGL. */
-
-#if (LANDSCAPE == 1)
-#if (ROTATE180 == 0)
- wr_reg (0x16, 0xA8);
-#else /* (ROTATE180 == 0) */
- wr_reg (0x16, 0x68);
-#endif /* (ROTATE180 == 0) */
-#else /* (LANDSCAPE == 1) */
-#if (ROTATE180 == 0)
- wr_reg (0x16, 0x08);
-#else /* (ROTATE180 == 0) */
- wr_reg (0x16, 0xC8);
-#endif /* (ROTATE180 == 0) */
-#endif /* (LANDSCAPE == 1) */
-
- /* Display scrolling settings --------------------------------------------*/
- wr_reg(0x0E, 0x00); /* TFA MSB */
- wr_reg(0x0F, 0x00); /* TFA LSB */
- wr_reg(0x10, 320 >> 8); /* VSA MSB */
- wr_reg(0x11, 320 & 0xFF); /* VSA LSB */
- wr_reg(0x12, 0x00); /* BFA MSB */
- wr_reg(0x13, 0x00); /* BFA LSB */
-
- LCD_BL(1); /* turn on backlight */
-}
diff --git a/source/hal/components/lcd_mps3/include/font_9x15_h.h b/source/hal/components/lcd_mps3/include/font_9x15_h.h
deleted file mode 100644
index b8b6bdc..0000000
--- a/source/hal/components/lcd_mps3/include/font_9x15_h.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (c) 2021 Arm Limited. All rights reserved.
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-//Font Generated by MikroElektronika GLCD Font Creator 1.2.0.0
-//MikroElektrnika 2011
-//http://www.mikroe.com
-
-//GLCD FontName : Lucida_Console9x15
-//GLCD FontSize : 9x15
-
-#ifndef FONT_9x15_H_H
-#define FONT_9x15_H_H
-
-const unsigned short Font_9x15_h[] = {
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* Code for char num 32. */
- 0x00,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x10,0x10,0x00,0x00,0x00, /* Code for char num 33. */
- 0x44,0x44,0x44,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* Code for char num 34. */
- 0x00,0x12,0x12,0x24,0x7F,0x24,0x28,0x48,0xFE,0x48,0x90,0x90,0x00,0x00,0x00, /* Code for char num 35. */
- 0x10,0x7C,0x16,0x12,0x12,0x1C,0x38,0x70,0x50,0x50,0x52,0x3E,0x10,0x00,0x00, /* Code for char num 36. */
- 0x00,0x8C,0x92,0x52,0x52,0x2C,0x10,0x08,0x68,0x94,0x92,0x92,0x62,0x00,0x00, /* Code for char num 37. */
- 0x00,0x18,0x24,0x24,0x34,0x18,0x0C,0x12,0xB2,0xE2,0xC2,0xBC,0x00,0x00,0x00, /* Code for char num 38. */
- 0x08,0x08,0x08,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* Code for char num 39. */
- 0xC0,0x60,0x10,0x10,0x08,0x08,0x08,0x08,0x08,0x08,0x10,0x10,0x60,0xC0,0x00, /* Code for char num 40. */
- 0x0C,0x18,0x20,0x20,0x40,0x40,0x40,0x40,0x40,0x40,0x20,0x20,0x18,0x0C,0x00, /* Code for char num 41. */
- 0x00,0x10,0x92,0xEE,0x18,0x28,0x28,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* Code for char num 42. */
- 0x00,0x00,0x00,0x00,0x10,0x10,0x10,0x10,0xFE,0x10,0x10,0x10,0x00,0x00,0x00, /* Code for char num 43. */
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x10,0x08,0x00, /* Code for char num 44. */
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* Code for char num 45. */
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00, /* Code for char num 46. */
- 0x80,0x40,0x40,0x60,0x20,0x20,0x10,0x10,0x08,0x08,0x0C,0x04,0x04,0x02,0x00, /* Code for char num 47. */
- 0x00,0x38,0x44,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x44,0x38,0x00,0x00,0x00, /* Code for char num 48. */
- 0x00,0x10,0x1E,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0xFE,0x00,0x00,0x00, /* Code for char num 49. */
- 0x00,0x3E,0x42,0x40,0x40,0x40,0x20,0x10,0x08,0x04,0x02,0x7E,0x00,0x00,0x00, /* Code for char num 50. */
- 0x00,0x3C,0x40,0x40,0x40,0x60,0x38,0x40,0x40,0x40,0x40,0x3C,0x00,0x00,0x00, /* Code for char num 51. */
- 0x00,0x20,0x30,0x28,0x24,0x24,0x22,0x21,0x7F,0x20,0x20,0x20,0x00,0x00,0x00, /* Code for char num 52. */
- 0x00,0x7C,0x04,0x04,0x04,0x1C,0x20,0x40,0x40,0x40,0x20,0x3C,0x00,0x00,0x00, /* Code for char num 53. */
- 0x00,0x78,0x04,0x04,0x02,0x3A,0x46,0x82,0x82,0x82,0x44,0x38,0x00,0x00,0x00, /* Code for char num 54. */
- 0x00,0xFE,0x80,0x40,0x20,0x20,0x10,0x10,0x08,0x08,0x04,0x04,0x00,0x00,0x00, /* Code for char num 55. */
- 0x00,0x3C,0x42,0x42,0x42,0x24,0x1C,0x62,0x42,0x42,0x42,0x3C,0x00,0x00,0x00, /* Code for char num 56. */
- 0x00,0x38,0x44,0x82,0x82,0x82,0xC4,0xB8,0x80,0x40,0x40,0x3C,0x00,0x00,0x00, /* Code for char num 57. */
- 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00, /* Code for char num 58. */
- 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x18,0x18,0x10,0x08,0x00, /* Code for char num 59. */
- 0x00,0x00,0x00,0x00,0x80,0x60,0x10,0x0C,0x0C,0x10,0x60,0x80,0x00,0x00,0x00, /* Code for char num 60. */
- 0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00, /* Code for char num 61. */
- 0x00,0x00,0x00,0x00,0x02,0x0C,0x10,0x60,0x60,0x10,0x0C,0x02,0x00,0x00,0x00, /* Code for char num 62. */
- 0x00,0x3E,0x42,0x42,0x40,0x20,0x10,0x08,0x08,0x00,0x08,0x08,0x00,0x00,0x00, /* Code for char num 63. */
- 0x00,0x78,0x84,0xE2,0x92,0x8A,0x8A,0xCA,0xCA,0xB2,0xA6,0x3C,0x00,0x00,0x00, /* Code for char num 64. */
- 0x00,0x00,0x10,0x38,0x28,0x28,0x44,0x44,0xFE,0x82,0x82,0x82,0x00,0x00,0x00, /* Code for char num 65. */
- 0x00,0x00,0x3E,0x42,0x42,0x22,0x1E,0x22,0x42,0x42,0x42,0x3E,0x00,0x00,0x00, /* Code for char num 66. */
- 0x00,0x00,0xF8,0x06,0x02,0x01,0x01,0x01,0x01,0x02,0x06,0xF8,0x00,0x00,0x00, /* Code for char num 67. */
- 0x00,0x00,0x3E,0x42,0x82,0x82,0x82,0x82,0x82,0x82,0x42,0x3E,0x00,0x00,0x00, /* Code for char num 68. */
- 0x00,0x00,0xFE,0x02,0x02,0x02,0x02,0x7E,0x02,0x02,0x02,0xFE,0x00,0x00,0x00, /* Code for char num 69. */
- 0x00,0x00,0xFE,0x02,0x02,0x02,0x02,0x7E,0x02,0x02,0x02,0x02,0x00,0x00,0x00, /* Code for char num 70. */
- 0x00,0x00,0xF8,0x06,0x02,0x01,0x01,0xE1,0x81,0x82,0x86,0xF8,0x00,0x00,0x00, /* Code for char num 71. */
- 0x00,0x00,0x42,0x42,0x42,0x42,0x42,0x7E,0x42,0x42,0x42,0x42,0x00,0x00,0x00, /* Code for char num 72. */
- 0x00,0x00,0xFE,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0xFE,0x00,0x00,0x00, /* Code for char num 73. */
- 0x00,0x00,0x3C,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x1E,0x00,0x00,0x00, /* Code for char num 74. */
- 0x00,0x00,0x42,0x22,0x12,0x0A,0x06,0x0A,0x12,0x22,0x42,0x82,0x00,0x00,0x00, /* Code for char num 75. */
- 0x00,0x00,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,0x00, /* Code for char num 76. */
- 0x00,0x00,0x63,0x63,0x63,0x55,0x55,0x55,0x4D,0x49,0x41,0x41,0x00,0x00,0x00, /* Code for char num 77. */
- 0x00,0x00,0x82,0x86,0x8A,0x8A,0x92,0x92,0xA2,0xA2,0xC2,0x82,0x00,0x00,0x00, /* Code for char num 78. */
- 0x00,0x00,0x3C,0x42,0x81,0x81,0x81,0x81,0x81,0x81,0x42,0x3C,0x00,0x00,0x00, /* Code for char num 79. */
- 0x00,0x00,0x3E,0x42,0x42,0x42,0x62,0x1E,0x02,0x02,0x02,0x02,0x00,0x00,0x00, /* Code for char num 80. */
- 0x00,0x00,0x3C,0x42,0x81,0x81,0x81,0x81,0x81,0x81,0x42,0x3C,0x60,0x80,0x00, /* Code for char num 81. */
- 0x00,0x00,0x3E,0x42,0x42,0x42,0x22,0x1E,0x12,0x22,0x42,0x82,0x00,0x00,0x00, /* Code for char num 82. */
- 0x00,0x00,0x7C,0x42,0x02,0x06,0x1C,0x20,0x40,0x40,0x42,0x3E,0x00,0x00,0x00, /* Code for char num 83. */
- 0x00,0x00,0xFE,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00,0x00, /* Code for char num 84. */
- 0x00,0x00,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x44,0x3C,0x00,0x00,0x00, /* Code for char num 85. */
- 0x00,0x00,0x82,0x82,0x82,0x82,0x44,0x44,0x28,0x28,0x38,0x10,0x00,0x00,0x00, /* Code for char num 86. */
- 0x00,0x00,0x82,0x82,0x92,0x92,0xAA,0xAA,0xAA,0xAA,0x64,0x44,0x00,0x00,0x00, /* Code for char num 87. */
- 0x00,0x00,0x82,0x82,0x44,0x28,0x10,0x10,0x28,0x44,0x82,0x82,0x00,0x00,0x00, /* Code for char num 88. */
- 0x00,0x00,0x82,0x82,0x44,0x44,0x28,0x10,0x10,0x10,0x10,0x10,0x00,0x00,0x00, /* Code for char num 89. */
- 0x00,0x00,0xFF,0x80,0x40,0x20,0x10,0x08,0x04,0x02,0x01,0xFF,0x00,0x00,0x00, /* Code for char num 90. */
- 0xF8,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0xF8,0x00, /* Code for char num 91. */
- 0x02,0x04,0x04,0x04,0x08,0x08,0x10,0x10,0x20,0x20,0x20,0x40,0x40,0x80,0x00, /* Code for char num 92. */
- 0x3E,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x3E,0x00, /* Code for char num 93. */
- 0x00,0x10,0x10,0x10,0x28,0x28,0x44,0x44,0x44,0x82,0x00,0x00,0x00,0x00,0x00, /* Code for char num 94. */
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x00,0x00, /* Code for char num 95. */
- 0x10,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* Code for char num 96. */
- 0x00,0x00,0x00,0x00,0x3C,0x40,0x40,0x78,0x44,0x42,0x62,0xDC,0x00,0x00,0x00, /* Code for char num 97. */
- 0x02,0x02,0x02,0x02,0x7A,0x46,0x82,0x82,0x82,0x82,0x46,0x3A,0x00,0x00,0x00, /* Code for char num 98. */
- 0x00,0x00,0x00,0x00,0xF8,0x04,0x02,0x02,0x02,0x02,0x04,0xF8,0x00,0x00,0x00, /* Code for char num 99. */
- 0x80,0x80,0x80,0x80,0xB8,0xC4,0x82,0x82,0x82,0x82,0xC4,0xBC,0x00,0x00,0x00, /* Code for char num 100. */
- 0x00,0x00,0x00,0x00,0x38,0x44,0x42,0x7E,0x02,0x02,0x04,0x78,0x00,0x00,0x00, /* Code for char num 101. */
- 0xF0,0x08,0x08,0x08,0xFE,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,0x00, /* Code for char num 102. */
- 0x00,0x00,0x00,0x00,0xB8,0xC4,0x82,0x82,0x82,0x82,0xC4,0xBC,0x80,0x40,0x3C, /* Code for char num 103. */
- 0x02,0x02,0x02,0x02,0x3A,0x46,0x42,0x42,0x42,0x42,0x42,0x42,0x00,0x00,0x00, /* Code for char num 104. */
- 0x18,0x18,0x00,0x00,0x1E,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00,0x00, /* Code for char num 105. */
- 0x30,0x30,0x00,0x00,0x3C,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x1E, /* Code for char num 106. */
- 0x02,0x02,0x02,0x02,0x42,0x22,0x12,0x0E,0x0A,0x12,0x22,0x42,0x00,0x00,0x00, /* Code for char num 107. */
- 0x1E,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00,0x00, /* Code for char num 108. */
- 0x00,0x00,0x00,0x00,0xDA,0xB6,0x92,0x92,0x92,0x92,0x92,0x92,0x00,0x00,0x00, /* Code for char num 109. */
- 0x00,0x00,0x00,0x00,0x3A,0x46,0x42,0x42,0x42,0x42,0x42,0x42,0x00,0x00,0x00, /* Code for char num 110. */
- 0x00,0x00,0x00,0x00,0x38,0x44,0x82,0x82,0x82,0x82,0x44,0x38,0x00,0x00,0x00, /* Code for char num 111. */
- 0x00,0x00,0x00,0x00,0x7A,0x46,0x82,0x82,0x82,0x82,0x46,0x3A,0x02,0x02,0x02, /* Code for char num 112. */
- 0x00,0x00,0x00,0x00,0xB8,0xC4,0x82,0x82,0x82,0x82,0xC4,0xBC,0x80,0x80,0x80, /* Code for char num 113. */
- 0x00,0x00,0x00,0x00,0xF4,0x8C,0x04,0x04,0x04,0x04,0x04,0x04,0x00,0x00,0x00, /* Code for char num 114. */
- 0x00,0x00,0x00,0x00,0x7C,0x02,0x02,0x0C,0x30,0x40,0x42,0x3E,0x00,0x00,0x00, /* Code for char num 115. */
- 0x00,0x00,0x08,0x08,0xFE,0x08,0x08,0x08,0x08,0x08,0x08,0xF0,0x00,0x00,0x00, /* Code for char num 116. */
- 0x00,0x00,0x00,0x00,0x42,0x42,0x42,0x42,0x42,0x42,0x62,0x5C,0x00,0x00,0x00, /* Code for char num 117. */
- 0x00,0x00,0x00,0x00,0x82,0x82,0x82,0x44,0x44,0x28,0x28,0x10,0x00,0x00,0x00, /* Code for char num 118. */
- 0x00,0x00,0x00,0x00,0x82,0x92,0xAA,0xAA,0xAA,0xAA,0x44,0x44,0x00,0x00,0x00, /* Code for char num 119. */
- 0x00,0x00,0x00,0x00,0x82,0x44,0x28,0x10,0x10,0x28,0x44,0x82,0x00,0x00,0x00, /* Code for char num 120. */
- 0x00,0x00,0x00,0x00,0x82,0x82,0x82,0x44,0x44,0x28,0x28,0x10,0x10,0x0C,0x00, /* Code for char num 121. */
- 0x00,0x00,0x00,0x00,0xFE,0x80,0x40,0x20,0x10,0x08,0x04,0xFE,0x00,0x00,0x00, /* Code for char num 122. */
- 0xE0,0x10,0x10,0x10,0x10,0x10,0x10,0x0C,0x10,0x10,0x10,0x10,0x10,0xE0,0x00, /* Code for char num 123. */
- 0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00, /* Code for char num 124. */
- 0x0E,0x10,0x10,0x10,0x10,0x10,0x10,0x60,0x10,0x10,0x10,0x10,0x10,0x0E,0x00, /* Code for char num 125. */
- 0x00,0x00,0x00,0x00,0x00,0x00,0x62,0x92,0x8C,0x00,0x00,0x00,0x00,0x00,0x00, /* Code for char num 126. */
- 0x00,0x00,0x00,0x07,0x05,0x05,0x05,0x05,0x05,0x05,0x07,0x00,0x00,0x00,0x00 /* Code for char num 127. */
-};
-
-
-#endif /* FONT_9x15_H_H */
\ No newline at end of file
diff --git a/source/hal/components/lcd_mps3/include/glcd_mps3.h b/source/hal/components/lcd_mps3/include/glcd_mps3.h
deleted file mode 100644
index 313d4ca..0000000
--- a/source/hal/components/lcd_mps3/include/glcd_mps3.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * Copyright (c) 2021-2022 Arm Limited. All rights reserved.
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef GLCD_MPS3_H
-#define GLCD_MPS3_H
-
-#include <stdint.h>
-
-/******************************************************************************
- Color coding
- GLCD is coded: 15..11 red, 10..5 green, 4..0 blue (unsigned short)
- GLCD_R5, GLCD_G6, GLCD_B5
- original coding: 17..12 red, 11..6 green, 5..0 blue
- ORG_R6, ORG_G6, ORG_B6
-
- ORG_R1..5 = GLCD_R0..4, ORG_R0 = GLCD_R4
- ORG_G0..5 = GLCD_G0..5,
- ORG_B1..5 = GLCD_B0..4, ORG_B0 = GLCD_B4
-
- GLCD RGB color definitions
-******************************************************************************/
-#define Black 0x0000 /* 0, 0, 0 */
-#define Navy 0x000F /* 0, 0, 128 */
-#define DarkGreen 0x03E0 /* 0, 128, 0 */
-#define DarkCyan 0x03EF /* 0, 128, 128 */
-#define Maroon 0x7800 /* 128, 0, 0 */
-#define Purple 0x780F /* 128, 0, 128 */
-#define Olive 0x7BE0 /* 128, 128, 0 */
-#define LightGrey 0xC618 /* 192, 192, 192 */
-#define DarkGrey 0x7BEF /* 128, 128, 128 */
-#define Blue 0x001F /* 0, 0, 255 */
-#define Green 0x07E0 /* 0, 255, 0 */
-#define Cyan 0x07FF /* 0, 255, 255 */
-#define Red 0xF800 /* 255, 0, 0 */
-#define Magenta 0xF81F /* 255, 0, 255 */
-#define Yellow 0xFFE0 /* 255, 255, 0 */
-#define White 0xFFFF /* 255, 255, 255 */
-
-/************************** Orientation configuration ************************/
-#ifndef LANDSCAPE
-#define LANDSCAPE 1 /* 1 for landscape, 0 for portrait. */
-#endif
-#ifndef ROTATE180
-#define ROTATE180 1 /* 1 to rotate the screen for 180 deg. */
-#endif
-
-/*------------------------- Speed dependant settings -------------------------*/
-
-/* If processor works on high frequency delay has to be increased, it can be
- increased by factor 2^N by this constant. */
-#define DELAY_2N 8
-
-/*---------------------- Graphic LCD size definitions ------------------------*/
-#if (LANDSCAPE == 1)
- #define GLCD_WIDTH 320 /* Screen Width (in pixels). */
- #define GLCD_HEIGHT 240 /* Screen Hight (in pixels). */
-#else
- #define GLCD_WIDTH 240 /* Screen Width (in pixels). */
- #define GLCD_HEIGHT 320 /* Screen Hight (in pixels). */
-#endif
-
-#define BPP 16 /* Bits per pixel. */
-#define BYPP ((BPP+7)/8) /* Bytes per pixel. */
-
-
-/**
- * @brief Initialize the Himax LCD with HX8347-D LCD Controller.
- */
-void GLCD_Initialize(void);
-
-/**
- * @brief Set draw window region to whole screen.
- */
-void GLCD_WindowMax(void);
-
-/**
- * @brief Set draw window region.
- * @param[in] x Horizontal position.
- * @param[in] y Vertical position.
- * @param[in] w Window width in pixel.
- * @param[in] h Window height in pixels.
- */
-void GLCD_SetWindow(unsigned int x, unsigned int y,
- unsigned int w, unsigned int h);
-
-/**
- * @brief Set foreground color.
- * @param[in] color Foreground color.
- */
-void GLCD_SetTextColor(unsigned short color);
-
-/**
- * @brief Set background color.
- * @param[in] color Background color.
- */
-void GLCD_SetBackColor(unsigned short color);
-
-/**
- * @brief Clear display.
- * @param[in] color Display clearing color.
- *
- */
-void GLCD_Clear(unsigned short color);
-
-/**
- * @brief Draw character on given position.
- * @param[in] x Horizontal position.
- * @param[in] y Vertical position.
- * @param[in] cw Character width in pixel.
- * @param[in] ch Character height in pixels.
- * @param[in] c Pointer to character bitmap.
- *
- */
-void GLCD_DrawChar(unsigned int x, unsigned int y,
- unsigned int cw, unsigned int ch,
- unsigned char *c);
-
-/**
- * @brief Display character on given line.
- * @param[in] ln Line number.
- * @param[in] col Column number.
- * @param[in] fi Font index (0 = 9x15).
- * @param[in] c ASCII character.
- */
-void GLCD_DisplayChar(unsigned int ln, unsigned int col,
- unsigned char fi, unsigned char c);
-
-
-/**
- * @brief Display string on given line.
- * @param[in] ln Line number.
- * @param[in] col Column number.
- * @param[in] fi Font index (0 = 9x15).
- * @param[in] s Pointer to string.
- */
-void GLCD_DisplayString(unsigned int ln, unsigned int col,
- unsigned char fi, char *s);
-
-/**
- * @brief Clear given line.
- * @param[in] ln: Line number.
- * @param[in] fi Font index (0 = 9x15).
- */
-void GLCD_ClearLn(unsigned int ln, unsigned char fi);
-
-/**
- * @brief Display graphical bitmap image at position x horizontally and y
- * vertically. This function is optimized for 16 bits per pixel
- * format, it has to be adapted for any other format.
- * @param[in] x Horizontal position.
- * @param[in] y Vertical position.
- * @param[in] w Width of bitmap.
- * @param[in] h Height of bitmap.
- * @param[in] bitmap Address at which the bitmap data resides.
- */
-void GLCD_Bitmap(unsigned int x, unsigned int y,
- unsigned int w, unsigned int h,
- unsigned short *bitmap);
-
-/**
- * @brief Displays an 8 bit image, conversion to the LCD's
- * 16 bit codec is done on the fly.
- * @param[in] data Pointer to the full sized image data.
- * @param[in] width Image width.
- * @param[in] height Image height.
- * @param[in] channels Number of channels in the image.
- * @param[in] pos_x Start x position for the LCD.
- * @param[in] pos_y Start y position for the LCD.
- * @param[in] downsample_factor Factor by which the image
- * is downsampled by.
- */
-void GLCD_Image(const void *data, const uint32_t width,
- const uint32_t height, const uint32_t channels,
- const uint32_t pos_x, const uint32_t pos_y,
- const uint32_t downsample_factor);
-
-/**
- * @brief Draw box filled with color.
- * @param[in] x Horizontal position.
- * @param[in] y Vertical position.
- * @param[in] w Window width in pixels.
- * @param[in] h Window height in pixels.
- * @param[in] color Box color.
- */
-void GLCD_Box(unsigned int x, unsigned int y,
- unsigned int w, unsigned int h,
- unsigned short color);
-
-#endif /* GLCD_MPS3_H */
diff --git a/source/hal/components/uart_cmsdk/include/uart_stdout.h b/source/hal/components/uart_cmsdk/include/uart_stdout.h
deleted file mode 100644
index 9c5fbcf..0000000
--- a/source/hal/components/uart_cmsdk/include/uart_stdout.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (c) 2021 Arm Limited. All rights reserved.
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef UART_STDOUT_H
-#define UART_STDOUT_H
-
-#include <stdbool.h>
-
-/**
- * @brief Initialised the UART block.
- **/
-extern void UartStdOutInit(void);
-
-/**
- * @brief Transmits a character over UART (blocking call).
- * @param[in] my_ch Character to be transmitted.
- * @return Character transmitted.
- **/
-extern unsigned char UartPutc(unsigned char my_ch);
-
-/**
- * @brief Receives a character from the UART block (blocking call).
- * @return Character received.
- **/
-extern unsigned char UartGetc(void);
-
-/**
- * @brief Reads characters from the UART block until a line feed or
- * carriage return terminates the function. NULL character
- * also terminates the function, error is returned.
- * @param[out] lp Characters read from the UART block.
- * @param[in] len Character to be transmitted.
- * @return true if successful, false otherwise.
- **/
-extern bool GetLine(char *lp, unsigned int len);
-
-/**
- * @brief Terminates UART simulation. This is useful when a Fixed
- * Virtual Platform's session needs to be gracefully terminated.
- * @param[in] code Terminating code displayed on the UART before the end of the simulation.
- **/
-extern void UartEndSimulation(int code);
-
-#endif /* UART_STDOUT_H */
diff --git a/source/hal/components/uart_cmsdk/uart_cmsdk.c b/source/hal/components/uart_cmsdk/uart_cmsdk.c
deleted file mode 100644
index 35d4160..0000000
--- a/source/hal/components/uart_cmsdk/uart_cmsdk.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright (c) 2021 Arm Limited. All rights reserved.
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "uart_stdout.h"
-
-#include "device_mps3.h"
-
-#include <stdio.h>
-
-#define CNTLQ 0x11
-#define CNTLS 0x13
-#define DEL 0x7F
-#define BACKSPACE 0x08
-#define CR 0x0D
-#define LF 0x0A
-#define ESC 0x1B
-
-void UartStdOutInit(void)
-{
- CMSDK_UART0->BAUDDIV = PERIF_CLK / 115200; /* => (25 or 32 MHz) / (115200 bps). */
- CMSDK_UART0->CTRL = ((1ul << 0) | /* TX enable. */
- (1ul << 1) ); /* RX enable. */
- return;
-}
-
-unsigned char UartPutc(unsigned char my_ch)
-{
- while ((CMSDK_UART0->STATE & 1)); /* Wait if Transmit Holding register is full. */
-
- if (my_ch == '\n') {
- CMSDK_UART0->DATA = '\r';
- while ((CMSDK_UART0->STATE & 1)); /* Wait if Transmit Holding register is full. */
- }
-
- CMSDK_UART0->DATA = my_ch; /* Write to transmit holding register. */
- return (my_ch);
-}
-
-unsigned char UartGetc(void)
-{
- unsigned char my_ch;
- unsigned int cnt;
-
- /* Wait if Receive Holding register is empty. */
- while (0 == (CMSDK_UART0->STATE & 2)) {
- cnt = MPS3_FPGAIO->CLK100HZ / 50;
- if (cnt & 0x8) {
- MPS3_FPGAIO->LED = 0x01 << (cnt & 0x7);
- }
- else {
- MPS3_FPGAIO->LED = 0x80 >> (cnt & 0x7);
- }
- }
-
- my_ch = CMSDK_UART0->DATA;
-
- /* Convert CR to LF. */
- if(my_ch == '\r') {
- my_ch = '\n';
- }
-
- return (my_ch);
-}
-
-bool GetLine(char *lp, unsigned int len)
-{
- unsigned int cnt = 0;
- char c;
-
- do {
- c = UartGetc ();
- switch (c) {
- case CNTLQ: /* Ignore Control S/Q. */
- case CNTLS:
- break;
-
- case BACKSPACE:
- case DEL:
- if (cnt == 0) {
- break;
- }
- cnt--; /* Decrement count. */
- lp--; /* Decrement line pointer. */
- UartPutc (0x08); /* Echo backspace. */
- UartPutc (' ');
- UartPutc (0x08);
- fflush (stdout);
- break;
-
- case ESC:
- case 0:
- *lp = 0; /* ESC - stop editing line. */
- return false;
-
- case CR: /* CR - done, stop editing line. */
- UartPutc (*lp = c); /* Echo and store character. */
- lp++; /* Increment line pointer */
- cnt++; /* and count. */
- c = LF;
- UartPutc (*lp = c); /* Echo and store character. */
- fflush (stdout);
- lp++; /* Increment line pointer */
- cnt++; /* and count. */
- break;
- default:
- UartPutc (*lp = c); /* Echo and store character. */
- fflush (stdout);
- lp++; /* Increment line pointer */
- cnt++; /* and count. */
- break;
- }
- } while (cnt < len - 2 && c != LF); /* Check limit and CR. */
- *lp = 0; /* Mark end of string. */
-
- return true;
-}
-
-__attribute__((noreturn)) void UartEndSimulation(int code)
-{
- UartPutc((char) 0x4); /* End of simulation */
- UartPutc((char) code); /* End of simulation */
- while(1);
-}
diff --git a/source/hal/components/uart_pl011/include/uart_stdout.h b/source/hal/components/uart_pl011/include/uart_stdout.h
deleted file mode 100644
index 9c5fbcf..0000000
--- a/source/hal/components/uart_pl011/include/uart_stdout.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (c) 2021 Arm Limited. All rights reserved.
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef UART_STDOUT_H
-#define UART_STDOUT_H
-
-#include <stdbool.h>
-
-/**
- * @brief Initialised the UART block.
- **/
-extern void UartStdOutInit(void);
-
-/**
- * @brief Transmits a character over UART (blocking call).
- * @param[in] my_ch Character to be transmitted.
- * @return Character transmitted.
- **/
-extern unsigned char UartPutc(unsigned char my_ch);
-
-/**
- * @brief Receives a character from the UART block (blocking call).
- * @return Character received.
- **/
-extern unsigned char UartGetc(void);
-
-/**
- * @brief Reads characters from the UART block until a line feed or
- * carriage return terminates the function. NULL character
- * also terminates the function, error is returned.
- * @param[out] lp Characters read from the UART block.
- * @param[in] len Character to be transmitted.
- * @return true if successful, false otherwise.
- **/
-extern bool GetLine(char *lp, unsigned int len);
-
-/**
- * @brief Terminates UART simulation. This is useful when a Fixed
- * Virtual Platform's session needs to be gracefully terminated.
- * @param[in] code Terminating code displayed on the UART before the end of the simulation.
- **/
-extern void UartEndSimulation(int code);
-
-#endif /* UART_STDOUT_H */
diff --git a/source/hal/components/uart_pl011/uart_pl011.c b/source/hal/components/uart_pl011/uart_pl011.c
deleted file mode 100644
index 1cbf70c..0000000
--- a/source/hal/components/uart_pl011/uart_pl011.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Copyright (c) 2021 Arm Limited. All rights reserved.
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "uart_stdout.h"
-#include "peripheral_memmap.h" /* peripheral memory map definitions */
-
-#include <stdio.h>
-#include <stdint.h>
-
-#define CNTLQ 0x11
-#define CNTLS 0x13
-#define DEL 0x7F
-#define BACKSPACE 0x08
-#define CR 0x0D
-#define LF 0x0A
-#define ESC 0x1B
-
-#define UARTBASE (PL011_UART0_BASE)
-
-/*****************************************************************************/
-/* UART Control Register Locations */
-/*****************************************************************************/
-#define UART0_DR *((volatile unsigned *) UARTBASE)
-#define UART0_RSR *((volatile unsigned *)(UARTBASE + 0x04))
-#define UART0_ECR *((volatile unsigned *)(UARTBASE + 0x04))
-#define UART0_LCRH *((volatile unsigned *)(UARTBASE + 0x2C))
-#define UART0_LCRM *((volatile unsigned *)(UARTBASE + 0x28))
-#define UART0_LCRL *((volatile unsigned *)(UARTBASE + 0x24))
-#define UART0_CR *((volatile unsigned *)(UARTBASE + 0x30))
-#define UART0_FR *((volatile unsigned *)(UARTBASE + 0x18))
-#define UART0_IIR *((volatile unsigned *)(UARTBASE + 0x1C))
-#define UART0_ICR *((volatile unsigned *)(UARTBASE + 0x44))
-
-/*****************************************************************************/
-/* Received Status Register - RSR */
-/*****************************************************************************/
-#define RSR_OVERRUN_ERROR 0x08
-#define RSR_BREAK_ERROR 0x04
-#define RSR_PARITY_ERROR 0x02
-#define RSR_FRAMING_ERROR 0x01
-
-/*****************************************************************************/
-/* Line Control High Byte Register - LCRH */
-/*****************************************************************************/
-#define LCRH_WORD_LENGTH_8 0x60
-#define LCRH_WORD_LENGTH_7 0x40
-#define LCRH_WORD_LENGTH_6 0x20
-#define LCRH_WORD_LENGTH_5 0x00
-#define LCRH_FIFO_ENABLED 0x10
-#define LCRH_2_STOP_BITS 0x08
-#define LCRH_EVEN_PARITY 0x04
-#define LCRH_PARITY_ENABLE 0x02
-#define LCRH_SEND_BREAK 0x01
-
-/*****************************************************************************/
-/* Line Control Medium Byte Register - LCRM */
-/* This register specifies the high byte of the Baud rate divisor */
-/*****************************************************************************/
-#define LCRM_BAUD_460800 0x00
-#define LCRM_BAUD_230400 0x00
-#define LCRM_BAUD_115200 0x00
-#define LCRM_BAUD_76800 0x00
-#define LCRM_BAUD_57600 0x00
-#define LCRM_BAUD_38400 0x00
-#define LCRM_BAUD_19200 0x00
-#define LCRM_BAUD_14400 0x00
-#define LCRM_BAUD_9600 0x00
-#define LCRM_BAUD_2400 0x01
-#define LCRM_BAUD_1200 0x02
-
-/*****************************************************************************/
-/* Line Control Low Byte Register - LCRL */
-/* This register specifies the low byte of the Baud rate divisor */
-/*****************************************************************************/
-#define LCRL_BAUD_460800 0x01
-#define LCRL_BAUD_230400 0x03
-#define LCRL_BAUD_115200 0x07
-#define LCRL_BAUD_76800 0x0B
-#define LCRL_BAUD_57600 0x0F
-#define LCRL_BAUD_38400 0xC
-#define LCRL_BAUD_19200 0x2F
-#define LCRL_BAUD_14400 0x3F
-#define LCRL_BAUD_9600 0x5F
-#define LCRL_BAUD_2400 0x7F
-#define LCRL_BAUD_1200 0xFF
-
-/*****************************************************************************/
-/* Control Register - CR */
-/*****************************************************************************/
-#define CR_LOOP_BACK_EN 0x80
-#define CR_TIMEOUT_INT_EN 0x40
-#define CR_TX_INT_ENABLE 0x100
-#define CR_RX_INT_ENABLE 0x200
-#define CR_MODSTAT_INT_EN 0x08
-#define CR_UART_ENABLE 0x01
-
-/*****************************************************************************/
-/* Flag Register - FR */
-/*****************************************************************************/
-#define FR_TX_FIFO_EMPTY 0x80
-#define FR_RX_FIFO_FULL 0x40
-#define FR_TX_FIFO_FULL 0x20
-#define FR_RX_FIFO_EMPTY 0x10
-#define FR_BUSY 0x08
-#define FR_CARRIER_DETECT 0x04
-#define FR_SET_READY 0x02
-#define FR_CLEAR_TO_SEND 0x01
-
-/*****************************************************************************/
-/* Interrupt Identification Register - IIR */
-/*****************************************************************************/
-#define IIR_RX_TIME_OUT 0x08
-#define IIR_TX 0x04
-#define IIR_RX 0x02
-#define IIR_MODEM 0x01
-
-void UartStdOutInit(void)
-{
- /* Disable the serial port while setting the baud rate and word length. */
- UART0_CR = 0;
-
- /* Clear the receive status register. */
- UART0_ECR = 0;
-
- /* Set the correct baud rate and word length. */
- UART0_LCRL = LCRL_BAUD_115200;
- UART0_LCRM = LCRM_BAUD_115200;
- UART0_LCRH = LCRH_WORD_LENGTH_8;
-
- /* Explicitly disable FIFO's for char mode. */
- UART0_LCRH &= ~LCRH_FIFO_ENABLED;
-
- /* Enable UART0 (and RX/TX) without interrupts. */
- UART0_CR = CR_UART_ENABLE | CR_TX_INT_ENABLE | CR_RX_INT_ENABLE;
-}
-
-unsigned char UartPutc(unsigned char ch)
-{
- if (ch == '\n') {
- (void) UartPutc('\r');
- }
- while (UART0_FR & FR_TX_FIFO_FULL)
- ;
- UART0_DR = ch;
-
- return ch;
-}
-
-unsigned char UartGetc(void)
-{
- unsigned char c;
- while (UART0_FR & FR_RX_FIFO_EMPTY)
- ;
- c = UART0_DR;
- if (c == '\r') {
- c = '\n';
- }
-
- return c;
-}
-
-bool GetLine (char *lp, unsigned int len)
-{
- unsigned int cnt = 0;
- char c;
-
- do {
- c = UartGetc();
- switch (c) {
- case CNTLQ: /* ignore Control S/Q. */
- case CNTLS:
- break;
- case BACKSPACE:
- case DEL:
- if (cnt == 0) {
- break;
- }
- cnt--; /* decrement count. */
- lp--; /* and line pointer. */
- UartPutc (0x08); /* echo backspace. */
- UartPutc (' ');
- UartPutc (0x08);
- fflush (stdout);
- break;
- case ESC:
- case 0:
- *lp = 0; /* ESC - stop editing line. */
- return false;
- case CR: /* CR - done, stop editing line. */
- UartPutc (*lp = c); /* Echo and store character. */
- lp++; /* Increment line pointer */
- cnt++; /* and count. */
- c = LF;
- UartPutc (*lp = c); /* Echo and store character. */
- fflush (stdout);
- lp++; /* Increment line pointer */
- cnt++; /* and count. */
- break;
- default:
- UartPutc (*lp = c); /* echo and store character. */
- fflush (stdout);
- lp++; /* increment line pointer. */
- cnt++; /* and count. */
- break;
- }
- } while (cnt < len - 2 && c != LF); /* check limit and CR. */
- *lp = 0; /* mark end of string. */
- return true;
-}
-
-__attribute__((noreturn)) void UartEndSimulation(int code)
-{
- UartPutc((char) 0x4); // End of simulation
- UartPutc((char) code); // Exit code
- while(1);
-}