MLECO-1860: Support for Arm GNU Embedded Toolchain
This patch enables compilation of ML use cases bare-metal applications
using Arm GNU Embedded Toolchain. The GNU toolchain can be used instead
of the Arm Compiler that was already supported.
The GNU toolchain is also set as the default toolchain when building
applications for the MPS3 target.
Note: The version of GNU toolchain must be 10.2.1 or higher.
Change-Id: I5fff242f0f52d2db6c75d292f9fa990df1aec978
Signed-off-by: Kshitij Sisodia <kshitij.sisodia@arm.com>
diff --git a/source/application/hal/platforms/bare-metal/bsp/bsp-packs/mps3/timer_mps3.c b/source/application/hal/platforms/bare-metal/bsp/bsp-packs/mps3/timer_mps3.c
index 0a3a8b1..a72103c 100644
--- a/source/application/hal/platforms/bare-metal/bsp/bsp-packs/mps3/timer_mps3.c
+++ b/source/application/hal/platforms/bare-metal/bsp/bsp-packs/mps3/timer_mps3.c
@@ -19,6 +19,8 @@
#include "bsp_core_log.h"
#include "device_mps3.h"
+#include <inttypes.h>
+
void timer_reset(void)
{
MPS3_FPGAIO->CLK1HZ = 0;
@@ -39,11 +41,11 @@
.counter_fpga = MPS3_FPGAIO->COUNTER,
.counter_systick = Get_SysTick_Cycle_Count()
};
- debug("Timestamp:\
- \n\tCounter 1 Hz: %u\
- \n\tCounter 100 Hz: %u\
- \n\tCounter FPGA: %u\
- \n\tCounter CPU: %llu\n",
+ debug("Timestamp:"
+ "\n\tCounter 1 Hz: %" PRIu32
+ "\n\tCounter 100 Hz: %" PRIu32
+ "\n\tCounter FPGA: %" PRIu32
+ "\n\tCounter CPU: %" PRIu64 "\n",
t.counter_1Hz, t.counter_100Hz, t.counter_fpga, t.counter_systick);
return t;
}