MLECO-1860: Support for Arm GNU Embedded Toolchain
This patch enables compilation of ML use cases bare-metal applications
using Arm GNU Embedded Toolchain. The GNU toolchain can be used instead
of the Arm Compiler that was already supported.
The GNU toolchain is also set as the default toolchain when building
applications for the MPS3 target.
Note: The version of GNU toolchain must be 10.2.1 or higher.
Change-Id: I5fff242f0f52d2db6c75d292f9fa990df1aec978
Signed-off-by: Kshitij Sisodia <kshitij.sisodia@arm.com>
diff --git a/source/application/hal/platforms/bare-metal/timer/baremetal_timer.c b/source/application/hal/platforms/bare-metal/timer/baremetal_timer.c
index ef31a71..64f2376 100644
--- a/source/application/hal/platforms/bare-metal/timer/baremetal_timer.c
+++ b/source/application/hal/platforms/bare-metal/timer/baremetal_timer.c
@@ -19,6 +19,7 @@
#include <assert.h>
#include <string.h>
+#include <inttypes.h>
#if defined (ARM_NPU)
@@ -40,7 +41,7 @@
static uint64_t bm_get_npu_total_cycle_diff(time_counter *st,
time_counter *end);
-/**
+/**
* @brief Gets the difference in active NPU cycle counts.
* @param[in] st Pointer to time_counter value at start time.
* @param[in] end Pointer to time_counter value at end.
@@ -100,7 +101,7 @@
#endif /* defined (ARM_NPU) */
#if defined(MPS3_PLATFORM)
-/**
+/**
* @brief Wrapper for getting milliseconds duration between time counters
* @param[in] st Pointer to time_counter value at start time.
* @param[in] end Pointer to time_counter value at end.
@@ -148,7 +149,7 @@
static uint32_t bm_get_cpu_cycles_diff(time_counter *st, time_counter *end);
/**
- * @brief Initialiser for bare metal timer.
+ * @brief Initialiser for bare metal timer.
* @param[in] timer Platform timer to initialize.
**/
void init_timer(platform_timer *timer)
@@ -307,7 +308,11 @@
};
#if defined (ARM_NPU)
- debug("NPU total cc: %llu; NPU idle cc: %u; NPU axi0 read cc: %u; NPU axi0 write cc: %u; NPU axi1 read cc: %u\n",
+ debug("NPU total cc: %" PRIu64
+ "; NPU idle cc: %" PRIu32
+ "; NPU axi0 read cc: %" PRIu32
+ "; NPU axi0 write cc: %" PRIu32
+ "; NPU axi1 read cc: %" PRIu32 "\n",
t.npu_total_ccnt,
t.npu_idle_ccnt,
t.npu_axi0_read_ccnt,