source/application/hal/platforms/bare-metal/bsp/mem_layout/mps3-sse-300.sct

;  Copyright (c) 2021 Arm Limited. All rights reserved.
;  SPDX-License-Identifier: Apache-2.0
;
;  Licensed under the Apache License, Version 2.0 (the "License");
;  you may not use this file except in compliance with the License.
;  You may obtain a copy of the License at
;
;      http://www.apache.org/licenses/LICENSE-2.0
;
;  Unless required by applicable law or agreed to in writing, software
;  distributed under the License is distributed on an "AS IS" BASIS,
;  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
;  See the License for the specific language governing permissions and
;  limitations under the License.

; *************************************************************
; ***       Scatter-Loading Description File                ***
; *************************************************************
; Please see docs/sections/appendix.md for memory mapping information.
;
; Note: Ethos-U NPU can access BRAM, internal SRAM and the DDR sections => activation buffers and
;       the model should only be placed in those regions.
;
;---------------------------------------------------------
; First load region (ITCM)
;---------------------------------------------------------
LOAD_REGION_0       0x00000000                  0x00080000
{
    ;-----------------------------------------------------
    ; First part of code mem - 512kiB
    ;-----------------------------------------------------
    itcm.bin        0x00000000                  0x00080000
    {
        *.o (RESET, +First)
        * (InRoot$$Sections)

        ; Essentially only RO-CODE, RO-DATA is in a
        ; different region.
        .ANY (+RO)
    }

    ;-----------------------------------------------------
    ; 128kiB of 512kiB DTCM is used for any other RW or ZI
    ; data. Note: this region is internal to the Cortex-M
    ; CPU.
    ;-----------------------------------------------------
    dtcm.bin        0x20000000                  0x00020000
    {
        ; Any R/W and/or zero initialised data
        .ANY(+RW +ZI)
    }

    ;-----------------------------------------------------
    ; 384kiB of stack space within the DTCM region. See
    ; `dtcm.bin` for the first section. Note: by virtue of
    ; being part of DTCM, this region is only accessible
    ; from Cortex-M55.
    ;-----------------------------------------------------
    ARM_LIB_STACK   0x20020000 EMPTY ALIGN 8    0x00060000
    {}

    ;-----------------------------------------------------
    ; SSE-300's internal SRAM of 4MiB - reserved for
    ; activation buffers.
    ; This region should have 3 cycle read latency from
    ; both Cortex-M55 and Ethos-U NPU
    ;-----------------------------------------------------
    isram.bin       0x31000000  UNINIT ALIGN 16 0x00400000
    {
        ; Cache area (if used)
        *.o (.bss.NoInit.ethos_u_cache)

        ; activation buffers a.k.a tensor arena when memory mode sram only or shared sram
        *.o (.bss.NoInit.activation_buf_sram)
    }
}

;---------------------------------------------------------
; Second load region (DDR)
;---------------------------------------------------------
LOAD_REGION_1       0x70000000                  0x02000000
{
    ;-----------------------------------------------------
    ; 32 MiB of DDR space for neural network model,
    ; input vectors and labels. If the activation buffer
    ; size required by the network is bigger than the
    ; SRAM size available, it is accommodated here.
    ;-----------------------------------------------------
    ddr.bin        0x70000000 ALIGN 16         0x02000000
    {
        ; nn model's baked in input matrices
        *.o (ifm)

        ; nn model's default space
        *.o (nn_model)

        ; labels
        *.o (labels)

        ; activation buffers a.k.a tensor arena when memory mode dedicated sram
        *.o (activation_buf_dram)
    }

    ;-----------------------------------------------------
    ; First 256kiB of BRAM (FPGA SRAM) used for RO data.
    ; Note: Total BRAM size available is 2MiB.
    ;-----------------------------------------------------
    bram.bin        0x11000000          ALIGN 8 0x00040000
    {
        ; RO data (incl. unwinding tables for debugging)
        .ANY (+RO-DATA)
    }

    ;-----------------------------------------------------
    ; 960 KiB of remaining part of the 2MiB BRAM used as
    ; heap space. 0x000F0000 of 0x0x001C0000 available.
    ;-----------------------------------------------------
    ARM_LIB_HEAP    0x11040000 EMPTY ALIGN 8    0x000F0000
    {}

    ;-----------------------------------------------------
    ; The following regions are for use by the FVP to
    ; allow loading or dumping of dynamic data into or
    ; from the memory. These regions are mentioned in
    ; the CMake subsystem profile. Do not change the
    ; addresses and sizes below in isolation.
    ;-----------------------------------------------------
    ; 32 MiB of model space for run-time load of model
    ;-----------------------------------------------------
    runtime_model   0x90000000 EMPTY ALIGN 16   0x02000000
    {}

    ;-----------------------------------------------------
    ; 16 MiB of IFM space for run-time loading (FVP only)
    ;-----------------------------------------------------
    runtime_ifm     0x92000000 EMPTY ALIGN 16   0x01000000
    {}

    ;-----------------------------------------------------
    ; 16 MiB of OFM space for run-time loading (FVP only)
    ;-----------------------------------------------------
    runtime_ofm     0x93000000 EMPTY ALIGN 16   0x01000000
    {}
}