| /* |
| * Copyright (c) 2017-2021 Arm Limited. |
| * |
| * SPDX-License-Identifier: MIT |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to |
| * deal in the Software without restriction, including without limitation the |
| * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in all |
| * copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
| * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| #include "gemm_helpers.h" |
| #include "helpers_asymm.h" |
| #include "repeat.h" |
| |
| #if defined(DATA_TYPE) && defined(ACC_DATA_TYPE) |
| |
| #if defined(ARM_COMPUTE_OPENCL_DOT8_ENABLED) && defined(cl_arm_integer_dot_product_int8) |
| #if defined(ARM_COMPUTE_OPENCL_DOT8_ACC_ENABLED) && defined(cl_arm_integer_dot_product_accumulate_int8) |
| #define ARM_DOT(x, y, val) val = arm_dot_acc((x), (y), (val)); |
| #else // defined(ARM_COMPUTE_OPENCL_DOT8_ACC_ENABLED) && defined(cl_arm_integer_dot_product_accumulate_int8) |
| #define ARM_DOT(x, y, val) val += arm_dot((x), (y)); |
| #endif // defined(ARM_COMPUTE_OPENCL_DOT8_ACC_ENABLED) && defined(cl_arm_integer_dot_product_accumulate_int8) |
| #endif // defined(ARM_COMPUTE_OPENCL_DOT8_ENABLED) && defined(cl_arm_integer_dot_product_int8) |
| |
| #if defined(ARM_COMPUTE_OPENCL_DOT8_ENABLED) && defined(cl_arm_integer_dot_product_int8) |
| |
| #define ARM_DOT1(a, b, c) \ |
| ({ \ |
| ARM_DOT((VEC_DATA_TYPE(DATA_TYPE, 4))(a, (VEC_DATA_TYPE(DATA_TYPE, 3))0), (VEC_DATA_TYPE(DATA_TYPE, 4))(b, (VEC_DATA_TYPE(DATA_TYPE, 3))0), c); \ |
| }) |
| #define ARM_DOT2(a, b, c) \ |
| ({ \ |
| ARM_DOT((VEC_DATA_TYPE(DATA_TYPE, 4))(a, (VEC_DATA_TYPE(DATA_TYPE, 2))0), (VEC_DATA_TYPE(DATA_TYPE, 4))(b, (VEC_DATA_TYPE(DATA_TYPE, 2))0), c); \ |
| }) |
| #define ARM_DOT3(a, b, c) \ |
| ({ \ |
| ARM_DOT((VEC_DATA_TYPE(DATA_TYPE, 4))(a, (DATA_TYPE)0), (VEC_DATA_TYPE(DATA_TYPE, 4))(b, (DATA_TYPE)0), c); \ |
| }) |
| #define ARM_DOT4(a, b, c) \ |
| ({ \ |
| ARM_DOT(a, b, c); \ |
| }) |
| #define ARM_DOT8(a, b, c) \ |
| ({ \ |
| ARM_DOT4((a.lo), (b.lo), c); \ |
| ARM_DOT4((a.hi), (b.hi), c); \ |
| }) |
| #define ARM_DOT16(a, b, c) \ |
| ({ \ |
| ARM_DOT8((a.lo), (b.lo), c); \ |
| ARM_DOT8((a.hi), (b.hi), c); \ |
| }) |
| |
| #else // defined(ARM_COMPUTE_OPENCL_DOT8_ENABLED) && defined(cl_arm_integer_dot_product_int8) |
| |
| /** Specialized macros to perform the dot product instruction between two vectors of size K0 [1,16] without using the dot8 instruction. */ |
| #define ARM_DOT1(a, b, c) \ |
| ({ \ |
| c += (ACC_DATA_TYPE)a * b; \ |
| }) |
| #define ARM_DOT2(a, b, c) \ |
| ({ \ |
| c += (ACC_DATA_TYPE)a.s0 * b.s0; \ |
| c += (ACC_DATA_TYPE)a.s1 * b.s1; \ |
| }) |
| #define ARM_DOT3(a, b, c) \ |
| ({ \ |
| ARM_DOT2(a, b, c); \ |
| c += (ACC_DATA_TYPE)a.s2 * b.s2; \ |
| }) |
| #define ARM_DOT4(a, b, c) \ |
| ({ \ |
| ARM_DOT3(a, b, c); \ |
| c += (ACC_DATA_TYPE)a.s3 * b.s3; \ |
| }) |
| #define ARM_DOT8(a, b, c) \ |
| ({ \ |
| ARM_DOT4((a.lo), (b.lo), c); \ |
| ARM_DOT4((a.hi), (b.hi), c); \ |
| }) |
| #define ARM_DOT16(a, b, c) \ |
| ({ \ |
| ARM_DOT8((a.lo), (b.lo), c); \ |
| ARM_DOT8((a.hi), (b.hi), c); \ |
| }) |
| #endif // defined(ARM_COMPUTE_OPENCL_DOT8_ENABLED) && defined(cl_arm_integer_dot_product_int8) |
| |
| /** Specialized macros to perform a broadcast dot product operation between one vector "a" and N0 vectors "b" of size K0 [1,16] */ |
| #define ARM_DOT_K0X1(k0, a, b, c) \ |
| ({ \ |
| ARM_DOT_K0(k0, (a), (b##0), (c)); \ |
| }) |
| #define ARM_DOT_K0X2(k0, a, b, c) \ |
| ({ \ |
| ARM_DOT_K0(k0, (a), (b##0), (c.s0)); \ |
| ARM_DOT_K0(k0, (a), (b##1), (c.s1)); \ |
| }) |
| #define ARM_DOT_K0X3(k0, a, b, c) \ |
| ({ \ |
| ARM_DOT_K0X2(k0, a, b, c); \ |
| ARM_DOT_K0(k0, (a), (b##2), (c.s2)); \ |
| }) |
| #define ARM_DOT_K0X4(k0, a, b, c) \ |
| ({ \ |
| ARM_DOT_K0X3(k0, a, b, c); \ |
| ARM_DOT_K0(k0, (a), (b##3), (c.s3)); \ |
| }) |
| #define ARM_DOT_K0X8(k0, a, b, c) \ |
| ({ \ |
| ARM_DOT_K0X4(k0, a, b, c); \ |
| ARM_DOT_K0(k0, (a), (b##4), (c.s4)); \ |
| ARM_DOT_K0(k0, (a), (b##5), (c.s5)); \ |
| ARM_DOT_K0(k0, (a), (b##6), (c.s6)); \ |
| ARM_DOT_K0(k0, (a), (b##7), (c.s7)); \ |
| }) |
| #define ARM_DOT_K0X16(k0, a, b, c) \ |
| ({ \ |
| ARM_DOT_K0X8(k0, a, b, c); \ |
| ARM_DOT_K0(k0, (a), (b##8), (c.s8)); \ |
| ARM_DOT_K0(k0, (a), (b##9), (c.s9)); \ |
| ARM_DOT_K0(k0, (a), (b##A), (c.sA)); \ |
| ARM_DOT_K0(k0, (a), (b##B), (c.sB)); \ |
| ARM_DOT_K0(k0, (a), (b##C), (c.sC)); \ |
| ARM_DOT_K0(k0, (a), (b##D), (c.sD)); \ |
| ARM_DOT_K0(k0, (a), (b##E), (c.sE)); \ |
| ARM_DOT_K0(k0, (a), (b##F), (c.sF)); \ |
| }) |
| |
| /** Specialized macros to perform a partial matrix multiplication with dimensions M0,N0,K0 */ |
| #define ARM_MM_K0XN0X1(n0, k0, a, b, c) \ |
| ({ \ |
| ARM_DOT_K0XN0(n0, k0, (a##0), b, (c##0)); \ |
| }) |
| #define ARM_MM_K0XN0X2(n0, k0, a, b, c) \ |
| ({ \ |
| ARM_MM_K0XN0X1(n0, k0, a, b, c); \ |
| ARM_DOT_K0XN0(n0, k0, (a##1), b, (c##1)); \ |
| }) |
| #define ARM_MM_K0XN0X3(n0, k0, a, b, c) \ |
| ({ \ |
| ARM_MM_K0XN0X2(n0, k0, a, b, c); \ |
| ARM_DOT_K0XN0(n0, k0, (a##2), b, (c##2)); \ |
| }) |
| #define ARM_MM_K0XN0X4(n0, k0, a, b, c) \ |
| ({ \ |
| ARM_MM_K0XN0X3(n0, k0, a, b, c); \ |
| ARM_DOT_K0XN0(n0, k0, (a##3), b, (c##3)); \ |
| }) |
| #define ARM_MM_K0XN0X5(n0, k0, a, b, c) \ |
| ({ \ |
| ARM_MM_K0XN0X4(n0, k0, a, b, c); \ |
| ARM_DOT_K0XN0(n0, k0, (a##4), b, (c##4)); \ |
| }) |
| #define ARM_MM_K0XN0X6(n0, k0, a, b, c) \ |
| ({ \ |
| ARM_MM_K0XN0X5(n0, k0, a, b, c); \ |
| ARM_DOT_K0XN0(n0, k0, (a##5), b, (c##5)); \ |
| }) |
| #define ARM_MM_K0XN0X7(n0, k0, a, b, c) \ |
| ({ \ |
| ARM_MM_K0XN0X6(n0, k0, a, b, c); \ |
| ARM_DOT_K0XN0(n0, k0, (a##6), b, (c##6)); \ |
| }) |
| #define ARM_MM_K0XN0X8(n0, k0, a, b, c) \ |
| ({ \ |
| ARM_MM_K0XN0X7(n0, k0, a, b, c); \ |
| ARM_DOT_K0XN0(n0, k0, (a##7), b, (c##7)); \ |
| }) |
| |
| #define ARM_DOT_K0(k0, a, b, c) \ |
| ({ \ |
| CONCAT(ARM_DOT, k0) \ |
| ((a), (b), (c)); \ |
| }) |
| |
| #define ARM_DOT_K0XN0(n0, k0, a, b, c) \ |
| ({ \ |
| CONCAT(ARM_DOT_K0X, n0) \ |
| (k0, (a), b, (c)); \ |
| }) |
| |
| #define ARM_MM_K0XN0XM0(m0, n0, k0, a, b, c) \ |
| ({ \ |
| CONCAT(ARM_MM_K0XN0X, m0) \ |
| (n0, k0, a, b, c); \ |
| }) |
| |
| /** Specialized macros to perform a broadcast dot product operation between one vector "a" and N0 vectors "b" of size K0 [1,16] */ |
| #define ARM_MUL_N0X1(VECTOR_ACC_TYPE, a, b, c) \ |
| ({ \ |
| c += CONVERT(b##0, VECTOR_ACC_TYPE) * a; \ |
| }) |
| #define ARM_MUL_N0X2(VECTOR_ACC_TYPE, a, b, c) \ |
| ({ \ |
| c += CONVERT(b##0, VECTOR_ACC_TYPE) * a.s##0; \ |
| c += CONVERT(b##1, VECTOR_ACC_TYPE) * a.s##1; \ |
| }) |
| #define ARM_MUL_N0X3(VECTOR_ACC_TYPE, a, b, c) \ |
| ({ \ |
| ARM_MUL_N0X2(VECTOR_ACC_TYPE, a, b, c); \ |
| c += CONVERT(b##2, VECTOR_ACC_TYPE) * a.s##2; \ |
| }) |
| #define ARM_MUL_N0X4(VECTOR_ACC_TYPE, a, b, c) \ |
| ({ \ |
| ARM_MUL_N0X3(VECTOR_ACC_TYPE, a, b, c); \ |
| c += CONVERT(b##3, VECTOR_ACC_TYPE) * a.s##3; \ |
| }) |
| #define ARM_MUL_N0X8(VECTOR_ACC_TYPE, a, b, c) \ |
| ({ \ |
| ARM_MUL_N0X4(VECTOR_ACC_TYPE, a, b, c); \ |
| c += CONVERT(b##4, VECTOR_ACC_TYPE) * a.s##4; \ |
| c += CONVERT(b##5, VECTOR_ACC_TYPE) * a.s##5; \ |
| c += CONVERT(b##6, VECTOR_ACC_TYPE) * a.s##6; \ |
| c += CONVERT(b##7, VECTOR_ACC_TYPE) * a.s##7; \ |
| }) |
| #define ARM_MUL_N0X16(VECTOR_ACC_TYPE, a, b, c) \ |
| ({ \ |
| ARM_MUL_N0X8(VECTOR_ACC_TYPE, a, b, c); \ |
| c += CONVERT(b##8, VECTOR_ACC_TYPE) * a.s##8; \ |
| c += CONVERT(b##9, VECTOR_ACC_TYPE) * a.s##9; \ |
| c += CONVERT(b##A, VECTOR_ACC_TYPE) * a.s##A; \ |
| c += CONVERT(b##B, VECTOR_ACC_TYPE) * a.s##B; \ |
| c += CONVERT(b##C, VECTOR_ACC_TYPE) * a.s##C; \ |
| c += CONVERT(b##D, VECTOR_ACC_TYPE) * a.s##D; \ |
| c += CONVERT(b##E, VECTOR_ACC_TYPE) * a.s##E; \ |
| c += CONVERT(b##F, VECTOR_ACC_TYPE) * a.s##F; \ |
| }) |
| /** Specialized macros to perform a a partial matrix multiplication with dimensions M0,N0,K0 */ |
| #define ARM_MM_NATIVE_N0XK0X1(VECTOR_ACC_TYPE, k0, a, b, c) \ |
| ({ \ |
| ARM_MUL_N0XK0(VECTOR_ACC_TYPE, k0, (a##0), b, (c##0)); \ |
| }) |
| #define ARM_MM_NATIVE_N0XK0X2(VECTOR_ACC_TYPE, k0, a, b, c) \ |
| ({ \ |
| ARM_MM_NATIVE_N0XK0X1(VECTOR_ACC_TYPE, k0, a, b, c); \ |
| ARM_MUL_N0XK0(VECTOR_ACC_TYPE, k0, (a##1), b, (c##1)); \ |
| }) |
| #define ARM_MM_NATIVE_N0XK0X3(VECTOR_ACC_TYPE, k0, a, b, c) \ |
| ({ \ |
| ARM_MM_NATIVE_N0XK0X2(VECTOR_ACC_TYPE, k0, a, b, c); \ |
| ARM_MUL_N0XK0(VECTOR_ACC_TYPE, k0, (a##2), b, (c##2)); \ |
| }) |
| #define ARM_MM_NATIVE_N0XK0X4(VECTOR_ACC_TYPE, k0, a, b, c) \ |
| ({ \ |
| ARM_MM_NATIVE_N0XK0X3(VECTOR_ACC_TYPE, k0, a, b, c); \ |
| ARM_MUL_N0XK0(VECTOR_ACC_TYPE, k0, (a##3), b, (c##3)); \ |
| }) |
| #define ARM_MM_NATIVE_N0XK0X5(VECTOR_ACC_TYPE, k0, a, b, c) \ |
| ({ \ |
| ARM_MM_NATIVE_N0XK0X4(VECTOR_ACC_TYPE, k0, a, b, c); \ |
| ARM_MUL_N0XK0(VECTOR_ACC_TYPE, k0, (a##4), b, (c##4)); \ |
| }) |
| #define ARM_MM_NATIVE_N0XK0X6(VECTOR_ACC_TYPE, k0, a, b, c) \ |
| ({ \ |
| ARM_MM_NATIVE_N0XK0X5(VECTOR_ACC_TYPE, k0, a, b, c); \ |
| ARM_MUL_N0XK0(VECTOR_ACC_TYPE, k0, (a##5), b, (c##5)); \ |
| }) |
| #define ARM_MM_NATIVE_N0XK0X7(VECTOR_ACC_TYPE, k0, a, b, c) \ |
| ({ \ |
| ARM_MM_NATIVE_N0XK0X6(VECTOR_ACC_TYPE, k0, a, b, c); \ |
| ARM_MUL_N0XK0(VECTOR_ACC_TYPE, k0, (a##6), b, (c##6)); \ |
| }) |
| #define ARM_MM_NATIVE_N0XK0X8(VECTOR_ACC_TYPE, k0, a, b, c) \ |
| ({ \ |
| ARM_MM_NATIVE_N0XK0X7(VECTOR_ACC_TYPE, k0, a, b, c); \ |
| ARM_MUL_N0XK0(VECTOR_ACC_TYPE, k0, (a##7), b, (c##7)); \ |
| }) |
| #define ARM_MUL_N0XK0(VECTOR_ACC_TYPE, k0, a, b, c) \ |
| ({ \ |
| CONCAT(ARM_MUL_N0X, k0) \ |
| (VECTOR_ACC_TYPE, (a), b, (c)); \ |
| }) |
| #define ARM_MM_NATIVE_N0XK0XM0(VECTOR_ACC_TYPE, m0, k0, a, b, c) \ |
| ({ \ |
| CONCAT(ARM_MM_NATIVE_N0XK0X, m0) \ |
| (VECTOR_ACC_TYPE, k0, a, b, c); \ |
| }) |
| |
| #if defined(M0) && defined(N0) && defined(K0) && defined(V0) && defined(H0) && defined(M) && defined(N) && defined(PARTIAL_STORE_M0) && defined(PARTIAL_STORE_N0) |
| /** This OpenCL kernel computes the matrix multiplication between 2 matrices with QASYMM/QASYMM_SIGNED data type. |
| * The LHS matrix must be reshaped with @ref CLGEMMReshapeLHSMatrixKernel and the M0xK0 must be NOT transposed |
| * The RHS matrix must be reshaped with @ref CLGEMMReshapeRHSMatrixKernel and the K0xN0 must be transposed |
| * |
| * @note The input data type must be passed at compile time using -DDATA_TYPE (i.e. -DDATA_TYPE=uchar) |
| * @note The accumulator data type must be passed at compile time using -DACC_DATA_TYPE (i.e. -DACC_DATA_TYPE=uint) |
| * @note If the first two dimensions of NDRange have been dispatched with "dummy_work_items" support, the option -DDUMMY_WORK_ITEMS must be passed at compile time. |
| * @note The GEMM's dimensions M and N must be passed at compile time using -DM and -DN (i.e. -DM=52 and -DN=90). |
| * @note The block's dimensions used for reshaping the LHS matrix and the RHS matrix (M0, N0 and K0) must be passed at compile time using -DM0, -DN0 and -DK0 (i.e. -DM0=4, -DN0=8, -DK0=4). |
| * @note The number of M0xK0 vertical blocks stored on the same output row of the reshaped LHS matrix must be passed at compile time using -DV0 (i.e. -DV0=2) |
| * @note The number of K0xN0 horizontal blocks stored on the same output row of the reshaped RHS matrix must be passed at compile time using -DH0 (i.e. -DH0=2) |
| * @note If the M0xK0 blocks in the reshaped LHS matrix have been interleaved, the option -DLHS_INTERLEAVE must passed at compile time. |
| * @note If the K0xN0 blocks in the reshaped RHS matrix have been interleaved, the option -DRHS_INTERLEAVE must passed at compile time. |
| * @note Only the following configurations of M0, N0 and K0 are currently supported: |
| * - M0 = 2, 3, 4, 5, 6, 7, 8 |
| * - N0 = 2, 3, 4, 8, 16 |
| * - K0 = 2, 3, 4, 8, 16 |
| * - V0 >= 1 |
| * - H0 >= 1 |
| * |
| * @note In case the output has to be reinterpreted as a 3D tensor (i.e. output of convolution layer), the following information must be passed at compile time: |
| * -# REINTERPRET_OUTPUT_AS_3D: To reinterpret the output as 3D |
| * -# HEIGHT_GEMM3D: The height of the output in case it has to be reinterpreted as a 3D tensor. |
| * -# DEPTH_GEMM3D: The depth of the output in case it has to be reinterpreted as a 3D tensor |
| * (HEIGHT_GEMM3D * DEPTH_GEMM3D) = columns LHS matrix NOT reshaped |
| * |
| * @param[in] lhs_ptr Pointer to the LHS reshaped matrix. Supported data type: QASYMM8/QASYMM_SIGNED |
| * @param[in] lhs_stride_x Stride of the LHS reshaped matrix in X dimension (in bytes) |
| * @param[in] lhs_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] lhs_stride_y Stride of the LHS reshaped matrix in Y dimension (in bytes) |
| * @param[in] lhs_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] lhs_offset_first_element_in_bytes The offset of the first element in the LHS reshaped matrix |
| * @param[in] rhs_ptr Pointer to the RHS reshaped matrix. Supported data type: same as @p lhs_ptr |
| * @param[in] rhs_stride_x Stride of the RHS reshaped matrix in X dimension (in bytes) |
| * @param[in] rhs_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] rhs_stride_y Stride of the RHS reshaped matrix in Y dimension (in bytes) |
| * @param[in] rhs_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] rhs_offset_first_element_in_bytes The offset of the first element in the RHS reshaped matrix |
| * @param[out] dst_ptr Pointer to the destination matrix Supported data type: S32 |
| * @param[in] dst_stride_x Stride of the destination matrix in X dimension (in bytes) |
| * @param[in] dst_step_x dst_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] dst_stride_y Stride of the destination matrix in Y dimension (in bytes) |
| * @param[in] dst_step_y dst_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] dst_offset_first_element_in_bytes The offset of the first element in the destination matrix |
| * @param[in] k Number of columns in LHS matrix and rows in RHS matrix not reshaped. |
| * @param[in] lhs_stride_z Stride of the LHS reshaped matrix in Z dimension (in bytes) |
| * @param[in] rhs_stride_z Stride of the RHS reshaped matrix in Z dimension (in bytes) |
| * @param[in] dst_stride_z Stride of the destination tensor in Z dimension (in bytes) |
| * @param[in] dst_cross_plane_pad (Optional) Bottom paddings in unit of elements (only if defined REINTERPRET_OUTPUT_AS_3D) |
| */ |
| __kernel void gemmlowp_mm_reshaped_lhs_nt_rhs_t(IMAGE_DECLARATION(lhs), |
| IMAGE_DECLARATION(rhs), |
| IMAGE_DECLARATION(dst), |
| uint k, |
| uint lhs_stride_z, |
| uint rhs_stride_z, |
| uint dst_stride_z |
| #if defined(REINTERPRET_OUTPUT_AS_3D) |
| , |
| uint dst_cross_plane_pad |
| #endif // REINTERPRET_OUTPUT_AS_3D |
| ) |
| { |
| // Block size |
| #define LHS_BLOCK_SIZE ((K0) * (M0)) |
| |
| #if defined(LHS_INTERLEAVE) |
| #define LHS_OFFSET_X (K0) |
| #define LHS_STEP_X ((K0) * (V0)) |
| #define LHS_STEP_LOOP (1) |
| #else // defined(INTERLEAVE) |
| #define LHS_OFFSET_X (LHS_BLOCK_SIZE) |
| #define LHS_STEP_X (K0) |
| #define LHS_STEP_LOOP (V0) |
| #endif // defined(INTERLEAVE) |
| |
| // Block size |
| #define RHS_BLOCK_SIZE ((K0) * (N0)) |
| |
| // RHS offset and step X |
| #if defined(RHS_INTERLEAVE) |
| #define RHS_OFFSET_X (K0) |
| #define RHS_STEP_X ((K0) * (H0)) |
| #define RHS_STEP_LOOP (1) |
| #else // defined(RHS_INTERLEAVE) |
| #define RHS_OFFSET_X (RHS_BLOCK_SIZE) |
| #define RHS_STEP_X (K0) |
| #define RHS_STEP_LOOP (H0) |
| #endif // defined(RHS_INTERLEAVE) |
| |
| uint x = get_global_id(0); |
| uint y = get_global_id(1); |
| uint z = get_global_id(2); |
| |
| #if defined(DUMMY_WORK_ITEMS) |
| if((x * N0 >= N) || (y * M0 >= M)) |
| { |
| return; |
| } |
| #endif // defined(DUMMY_WORK_ITEMS) |
| |
| // Compute LHS matrix address |
| __global DATA_TYPE *lhs_addr = (__global DATA_TYPE *)(lhs_ptr + lhs_offset_first_element_in_bytes + (y % V0) * (uint)LHS_OFFSET_X + (y / V0) * (uint)lhs_stride_y + (z * lhs_stride_z)); |
| |
| // Compute RHS matrix address |
| __global DATA_TYPE *rhs_addr = (__global DATA_TYPE *)(rhs_ptr + rhs_offset_first_element_in_bytes + (x % H0) * (uint)RHS_OFFSET_X + (x / (uint)H0) * rhs_stride_y); |
| |
| #if defined(MATRIX_B_DEPTH) |
| // Do not slide matrix B if the matrix B has 3 dimensions and matrix A more than 3 |
| rhs_addr += (z % MATRIX_B_DEPTH) * rhs_stride_z; |
| #else // defined(MATRIX_B_DEPTH) |
| rhs_addr += z * rhs_stride_z; |
| #endif // defined(MATRIX_B_DEPTH) |
| |
| REPEAT_VAR_INIT_TO_CONST(8, uint, zlhs, 0); //uint zout0=0,zout1=0,zout2=0,... zout7=0; |
| REPEAT_VAR_INIT_TO_CONST(16, uint, zrhs, 0); |
| |
| // Initialize the accumulators |
| REPEAT_VAR_INIT_TO_CONST(M0, VEC_DATA_TYPE(ACC_DATA_TYPE, N0), c, 0); //VEC_DATA_TYPE(ACC_DATA_TYPE, N0) c0=0,c1=0,c2=0,... c(M0-1)=0; |
| |
| for(int i = 0; i < k; i += K0) |
| { |
| // Load values from LHS matrix |
| LOAD_BLOCK(M0, K0, DATA_TYPE, a, lhs_addr, 0, LHS_STEP_X, zlhs); |
| |
| // Load values from RHS matrix |
| LOAD_BLOCK(N0, K0, DATA_TYPE, b, rhs_addr, 0, RHS_STEP_X, zrhs); |
| |
| // Partial matrix multiplication M0,N0,K0 |
| ARM_MM_K0XN0XM0(M0, N0, K0, a, b, c); |
| |
| // Update address |
| lhs_addr += (M0 * LHS_STEP_X * LHS_STEP_LOOP); |
| rhs_addr += (N0 * RHS_STEP_X * RHS_STEP_LOOP); |
| } |
| |
| __global uchar *dst_addr = dst_ptr + dst_offset_first_element_in_bytes + (x * (uint)N0 * sizeof(int)) + (y * (uint)M0 * dst_stride_y); |
| |
| REPEAT_VAR_INIT_TO_CONST(8, uint, zout, 0); //uint zout0=0,zout1=0,zout2=0,... zout7=0; |
| |
| #if defined(REINTERPRET_OUTPUT_AS_3D) |
| // The plane (zout) is calculated dividing M (y * M0) by HEIGHT_GEMM3D |
| CALCULATE_Z_OFFSET(M0, uint, zout, y * M0, HEIGHT_GEMM3D, DEPTH_GEMM3D, dst_cross_plane_pad, dst_stride_y); |
| |
| // Add offset for batched GEMM. The batches will be in the fourth dimension and for this reason we |
| // multiply dst_stride_z by DEPTH_GEMM3D |
| dst_addr += z * dst_stride_z * DEPTH_GEMM3D; |
| |
| #else // defined(REINTERPRET_OUTPUT_AS_3D) |
| |
| // Add offset for batched GEMM |
| dst_addr += z * dst_stride_z; |
| |
| #endif // defined(REINTERPRET_OUTPUT_AS_3D) |
| |
| // Convert and store output block |
| const bool cond_y = ((get_global_id(1) + 1) * M0 >= M); |
| const bool cond_x = ((get_global_id(0) + 1) * N0 >= N); |
| |
| // Store output block |
| REPEAT_VAR_INIT_CONVERT_SAT(M0, VEC_DATA_TYPE(int, N0), c, c_lp); |
| STORE_BLOCK_BOUNDARY_AWARE(M0, N0, int, c_lp, dst_addr, dst_stride_y, zout, PARTIAL_STORE_M0, PARTIAL_STORE_N0, cond_y, cond_x); |
| |
| #undef LHS_BLOCK_SIZE |
| #undef LHS_OFFSET_X |
| #undef LHS_STEP_X |
| #undef RHS_BLOCK_SIZE |
| #undef RHS_OFFSET_X |
| #undef RHS_STEP_X |
| } |
| #endif // defined(M0) && defined(N0) && defined(K0) && defined(V0) && defined(H0) && defined(M) && defined(N) && defined(PARTIAL_STORE_M0) && defined(PARTIAL_STORE_N0) |
| |
| #if defined(M0) && defined(N0) && defined(K0) && defined(H0) && defined(K) && defined(PARTIAL_STORE_M0) && defined(PARTIAL_STORE_N0) |
| |
| /** This OpenCL kernel computes the matrix multiplication between 2 matrices. |
| * The LHS matrix is NOT reshaped |
| * The RHS matrix is reshaped with @ref CLGEMMReshapeRHSMatrixKernel and the block K0xN0 is transposed |
| * |
| * @note The input data type must be passed at compile time using -DDATA_TYPE (i.e. -DDATA_TYPE=uchar) |
| * @note The accumulator data type must be passed at compile time using -DACC_DATA_TYPE (i.e. -DACC_DATA_TYPE=uint) |
| * @note The number of columns of LHS matrix must be passed at compile time using -DK (i.e. -DK=64) |
| * @note The block's dimensions used for reshaping the RHS matrix (N0 and K0) must be passed at compile time using -DN0 and -DK0 (i.e. -DN0=8, -DK0=4). |
| * @note The number of M0 rows to process must be passed at compile time using -DM0 (i.e. -DM0=2) |
| * @note The number of K0xN0 horizontal blocks stored on the same output row of the reshaped RHS matrix must be passed at compile time using -DH0 (i.e. -DH0=2) |
| * @note If the K0xN0 blocks in the reshaped RHS matrix have been interleaved, the option -DRHS_INTERLEAVE must passed at compile time. |
| * @note Only the following configurations of M0, N0 and K0 are currently supported: |
| * - M0 = 1, 2, 3, 4, 5, 6, 7, 8 |
| * - N0 = 2, 3, 4, 8, 16 |
| * - K0 = 2, 3, 4, 8, 16 |
| * - H0 >= 1 |
| * |
| * @note In case the input or output have to be reinterpreted as a 3D tensor, the following information must be passed at compile time: |
| * -# REINTERPRET_INPUT_AS_3D: To reinterpret the input as 3D |
| * -# REINTERPRET_OUTPUT_AS_3D: To reinterpret the output as 3D |
| * -# HEIGHT_GEMM3D: The height of the output in case it has to be reinterpreted as a 3D tensor. |
| * -# DEPTH_GEMM3D: The depth of the output in case it has to be reinterpreted as a 3D tensor |
| * (HEIGHT_GEMM3D * DEPTH_GEMM3D) = columns LHS matrix |
| * |
| * @param[in] lhs_ptr Pointer to the LHS reshaped matrix. Supported data type: QASYMM8/QASYMM8_SIGNED |
| * @param[in] lhs_stride_x Stride of the LHS reshaped matrix in X dimension (in bytes) |
| * @param[in] lhs_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] lhs_stride_y Stride of the LHS reshaped matrix in Y dimension (in bytes) |
| * @param[in] lhs_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] lhs_offset_first_element_in_bytes The offset of the first element in the LHS reshaped matrix |
| * @param[in] rhs_ptr Pointer to the RHS reshaped matrix. Supported data type: same as @p lhs_ptr |
| * @param[in] rhs_stride_x Stride of the RHS reshaped matrix in X dimension (in bytes) |
| * @param[in] rhs_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] rhs_stride_y Stride of the RHS reshaped matrix in Y dimension (in bytes) |
| * @param[in] rhs_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] rhs_offset_first_element_in_bytes The offset of the first element in the RHS reshaped matrix |
| * @param[out] dst_ptr Pointer to the destination matrix Supported data type: S32 |
| * @param[in] dst_stride_x Stride of the destination matrix in X dimension (in bytes) |
| * @param[in] dst_step_x dst_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] dst_stride_y Stride of the destination matrix in Y dimension (in bytes) |
| * @param[in] dst_step_y dst_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] dst_offset_first_element_in_bytes The offset of the first element in the destination matrix |
| * @param[in] lhs_stride_z Stride of the LHS reshaped matrix in Z dimension (in bytes) |
| * @param[in] rhs_stride_z Stride of the RHS reshaped matrix in Z dimension (in bytes) |
| * @param[in] dst_stride_z Stride of the destination tensor in Z dimension (in bytes) |
| * @param[in] lhs_cross_plane_pad (Optional) Bottom paddings for LHS matrix in unit of elements (only if defined REINTERPRET_INPUT_AS_3D) |
| * @param[in] dst_cross_plane_pad (Optional) Bottom paddings for the output matrix in unit of elements (only if defined REINTERPRET_OUTPUT_AS_3D) |
| */ |
| __kernel void gemmlowp_mm_reshaped_only_rhs_t(IMAGE_DECLARATION(lhs), |
| IMAGE_DECLARATION(rhs), |
| IMAGE_DECLARATION(dst), |
| uint lhs_stride_z, |
| uint rhs_stride_z, |
| uint dst_stride_z |
| #if defined(REINTERPRET_INPUT_AS_3D) |
| , |
| uint lhs_cross_plane_pad |
| #endif // REINTERPRET_INPUT_AS_3D |
| #if defined(REINTERPRET_OUTPUT_AS_3D) |
| , |
| uint dst_cross_plane_pad |
| #endif // REINTERPRET_OUTPUT_AS_3D |
| ) |
| { |
| // Block size |
| #define RHS_BLOCK_SIZE ((K0) * (N0)) |
| |
| // RHS offset and step X |
| #if defined(RHS_INTERLEAVE) |
| #define RHS_OFFSET_X (K0) |
| #define RHS_STEP_X ((K0) * (H0)) |
| #define RHS_STEP_LOOP (1) |
| #else // defined(RHS_INTERLEAVE) |
| #define RHS_OFFSET_X (RHS_BLOCK_SIZE) |
| #define RHS_STEP_X (K0) |
| #define RHS_STEP_LOOP (H0) |
| #endif // defined(RHS_INTERLEAVE) |
| |
| uint x = get_global_id(0); |
| uint y = get_global_id(1); |
| uint z = get_global_id(2); |
| |
| #if defined(DUMMY_WORK_ITEMS) |
| if((x * N0 >= N) || (y * M0 >= M)) |
| { |
| return; |
| } |
| #endif // defined(DUMMY_WORK_ITEMS) |
| |
| // Compute LHS matrix address |
| uint lhs_offset = lhs_offset_first_element_in_bytes + COMPUTE_M0_START_ROW(y, M0, PARTIAL_STORE_M0) * (uint)lhs_stride_y; |
| |
| // Compute RHS matrix address |
| uint rhs_offset = rhs_offset_first_element_in_bytes + (x % H0) * (uint)RHS_OFFSET_X + (x / (uint)H0) * rhs_stride_y; |
| |
| #if defined(MATRIX_B_DEPTH) |
| // Do not slide matrix B if the matrix B has 3 dimensions and matrix A more than 3 |
| rhs_offset += (z % MATRIX_B_DEPTH) * rhs_stride_z; |
| #else // defined(MATRIX_B_DEPTH) |
| rhs_offset += z * rhs_stride_z; |
| #endif // defined(MATRIX_B_DEPTH) |
| |
| REPEAT_VAR_INIT_TO_CONST(8, uint, zlhs, 0); //uint zout0=0,zout1=0,zout2=0,... zout7=0; |
| REPEAT_VAR_INIT_TO_CONST(16, uint, zrhs, 0); |
| |
| #if defined(REINTERPRET_INPUT_AS_3D) |
| // The plane (zlhs) is calculated dividing M (y * M0) by HEIGHT_GEMM3D |
| CALCULATE_Z_OFFSET(M0, uint, zlhs, COMPUTE_M0_START_ROW(y, M0, PARTIAL_STORE_M0), HEIGHT_GEMM3D, DEPTH_GEMM3D, lhs_cross_plane_pad, lhs_stride_y); |
| |
| // Add offset for batched GEMM. The batches will be in the fourth dimension and for this reason we |
| // multiply lhs_stride_z by DEPTH_GEMM3D |
| lhs_offset += z * lhs_stride_z * DEPTH_GEMM3D; |
| |
| #else // defined(REINTERPRET_INPUT_AS_3D) |
| |
| // Add offset for batched GEMM |
| lhs_offset += z * lhs_stride_z; |
| |
| #endif // defined(REINTERPRET_INPUT_AS_3D) |
| |
| // Initialize the accumulators |
| REPEAT_VAR_INIT_TO_CONST(M0, VEC_DATA_TYPE(ACC_DATA_TYPE, N0), c, 0); //VEC_DATA_TYPE(ACC_DATA_TYPE, N0) c0=0,c1=0,c2=0,... c(N0-1)=0; |
| |
| int i = 0; |
| for(; i <= (K - K0); i += K0) |
| { |
| // Load values from LHS matrix |
| LOAD_BLOCK(M0, K0, DATA_TYPE, a, lhs_ptr, lhs_offset, lhs_stride_y, zlhs); |
| |
| // Load values from RHS matrix |
| LOAD_BLOCK(N0, K0, DATA_TYPE, b, rhs_ptr, rhs_offset, RHS_STEP_X, zrhs); |
| |
| // Partial matrix multiplication M0,N0,K0 |
| ARM_MM_K0XN0XM0(M0, N0, K0, a, b, c); |
| |
| lhs_offset += K0; |
| rhs_offset += N0 * RHS_STEP_X * RHS_STEP_LOOP; |
| } |
| // Left-over accumulations |
| for(; i < K; ++i) |
| { |
| // Load values from LHS matrix |
| LOAD_BLOCK(M0, 1, DATA_TYPE, a, lhs_ptr, lhs_offset, lhs_stride_y, zlhs); |
| |
| // Load values from RHS reshaped matrix |
| LOAD_BLOCK(N0, 1, DATA_TYPE, b, rhs_ptr, rhs_offset, RHS_STEP_X, zrhs); |
| |
| ARM_MM_K0XN0XM0(M0, N0, 1, a, b, c); |
| lhs_offset += 1; |
| rhs_offset += 1; |
| } |
| __global uchar *dst_addr = dst_ptr + dst_offset_first_element_in_bytes + (x * (uint)N0 * sizeof(int)) + (COMPUTE_M0_START_ROW(y, M0, PARTIAL_STORE_M0) * dst_stride_y); |
| |
| REPEAT_VAR_INIT_TO_CONST(8, uint, zout, 0); //uint zout0=0,zout1=0,zout2=0,... zout7=0; |
| |
| #if defined(REINTERPRET_OUTPUT_AS_3D) |
| // The plane (zout) is calculated dividing M (y * M0) by HEIGHT_GEMM3D |
| CALCULATE_Z_OFFSET(M0, uint, zout, COMPUTE_M0_START_ROW(y, M0, PARTIAL_STORE_M0), HEIGHT_GEMM3D, DEPTH_GEMM3D, dst_cross_plane_pad, dst_stride_y); |
| |
| // Add offset for batched GEMM. The batches will be in the fourth dimension and for this reason we |
| // multiply dst_stride_z by DEPTH_GEMM3D |
| dst_addr += z * dst_stride_z * DEPTH_GEMM3D; |
| |
| #else // defined(REINTERPRET_OUTPUT_AS_3D) |
| |
| // Add offset for batched GEMM |
| dst_addr += z * dst_stride_z; |
| |
| #endif // defined(REINTERPRET_OUTPUT_AS_3D) |
| |
| // Convert and store output block |
| const bool cond_y = y == 0; |
| const bool cond_x = ((x + 1) * N0 >= N); |
| |
| // Store output block |
| REPEAT_VAR_INIT_CONVERT_SAT(M0, VEC_DATA_TYPE(int, N0), c, c_lp); |
| STORE_BLOCK_BOUNDARY_AWARE(M0, N0, int, c_lp, dst_addr, dst_stride_y, zout, PARTIAL_STORE_M0, PARTIAL_STORE_N0, cond_y, cond_x); |
| |
| #undef RHS_BLOCK_SIZE |
| #undef RHS_OFFSET_X |
| #undef RHS_STEP_X |
| } |
| |
| #if defined(RESULT_OFFSET) && defined(RESULT_SHIFT) && defined(RESULT_MULTIPLIER) |
| /** This OpenCL kernel computes the matrix multiplication between 2 matrices with fused output stage using fixed-point arithmetic. |
| * The LHS matrix is NOT reshaped |
| * The RHS matrix is reshaped with @ref CLGEMMReshapeRHSMatrixKernel and the block K0xN0 is transposed |
| * |
| * @note The input data type must be passed at compile time using -DDATA_TYPE (i.e. -DDATA_TYPE=uchar) |
| * @note The accumulator data type must be passed at compile time using -DACC_DATA_TYPE (i.e. -DACC_DATA_TYPE=uint) |
| * @note The number of columns of LHS matrix must be passed at compile time using -DK (i.e. -DK=64) |
| * @note The block's dimensions used for reshaping the RHS matrix (N0 and K0) must be passed at compile time using -DN0 and -DK0 (i.e. -DN0=8, -DK0=4). |
| * @note The number of M0 rows to process must be passed at compile time using -DM0 (i.e. -DM0=2) |
| * @note The number of K0xN0 horizontal blocks stored on the same output row of the reshaped RHS matrix must be passed at compile time using -DH0 (i.e. -DH0=2) |
| * @note If the K0xN0 blocks in the reshaped RHS matrix have been interleaved, the option -DRHS_INTERLEAVE must passed at compile time. |
| * @note Only the following configurations of M0, N0 and K0 are currently supported: |
| * - M0 = 1, 2, 3, 4, 5, 6, 7, 8 |
| * - N0 = 2, 3, 4, 8, 16 |
| * - K0 = 2, 3, 4, 8, 16 |
| * - H0 >= 1 |
| * |
| * @note In case the input or output have to be reinterpreted as a 3D tensor, the following information must be passed at compile time: |
| * -# REINTERPRET_INPUT_AS_3D: To reinterpret the input as 3D |
| * -# REINTERPRET_OUTPUT_AS_3D: To reinterpret the output as 3D |
| * -# HEIGHT_GEMM3D: The height of the output in case it has to be reinterpreted as a 3D tensor. |
| * -# DEPTH_GEMM3D: The depth of the output in case it has to be reinterpreted as a 3D tensor |
| * (HEIGHT_GEMM3D * DEPTH_GEMM3D) = columns LHS matrix |
| * |
| * @note The offset, scalar scale factor and number of bits to shift right of output tensor must be passed at compile time using -DRESULT_OFFSET, -RESULT_MULTIPLIER and -DRESULT_SHIFT |
| * @note In case the addition of int32 biases is required, -DADD_BIAS should be passed at compile time |
| * @note The output datatype should be passed at compile time using -DOUTPUT_DATA_TYPE |
| * @note In case the clamping of the result is required, the min and max bounds can be passed at compile time using -DMIN_BOUND and -DMAX_BOUND. |
| * These values can be used to implement "rectified linear unit" activation functions |
| * @note In case of per-channel quantization of matrix B, -DPER_CHANNEL_QUANTIZATION must be passed at compile time. |
| * |
| * @param[in] lhs_ptr Pointer to the LHS reshaped matrix. Supported data type: QASYMM8/QASYMM8_SIGNED |
| * @param[in] lhs_stride_x Stride of the LHS reshaped matrix in X dimension (in bytes) |
| * @param[in] lhs_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] lhs_stride_y Stride of the LHS reshaped matrix in Y dimension (in bytes) |
| * @param[in] lhs_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] lhs_offset_first_element_in_bytes The offset of the first element in the LHS reshaped matrix |
| * @param[in] rhs_ptr Pointer to the RHS reshaped matrix. Supported data type: same as @p lhs_ptr |
| * @param[in] rhs_stride_x Stride of the RHS reshaped matrix in X dimension (in bytes) |
| * @param[in] rhs_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] rhs_stride_y Stride of the RHS reshaped matrix in Y dimension (in bytes) |
| * @param[in] rhs_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] rhs_offset_first_element_in_bytes The offset of the first element in the RHS reshaped matrix |
| * @param[out] dst_ptr Pointer to the destination matrix Supported data type: same as @p lhs_ptr |
| * @param[in] dst_stride_x Stride of the destination matrix in X dimension (in bytes) |
| * @param[in] dst_step_x dst_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] dst_stride_y Stride of the destination matrix in Y dimension (in bytes) |
| * @param[in] dst_step_y dst_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] dst_offset_first_element_in_bytes The offset of the first element in the destination matrix |
| * @param[in] lhs_stride_z Stride of the LHS reshaped matrix in Z dimension (in bytes) |
| * @param[in] rhs_stride_z Stride of the RHS reshaped matrix in Z dimension (in bytes) |
| * @param[in] dst_stride_z Stride of the destination tensor in Z dimension (in bytes) |
| * @param[in] lhs_cross_plane_pad (Optional) Bottom paddings for LHS matrix in unit of elements (only if defined REINTERPRET_INPUT_AS_3D) |
| * @param[in] dst_cross_plane_pad (Optional) Bottom paddings for the output matrix in unit of elements (only if defined REINTERPRET_OUTPUT_AS_3D) |
| * @param[in] sum_col_ptr (Optional) Pointer to the source tensor. Supported data type: S32 |
| * @param[in] sum_col_stride_x (Optional) Stride of the source tensor in X dimension (in bytes) |
| * @param[in] sum_col_step_x (Optional) sum_col_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] sum_col_stride_y (Optional) Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] sum_col_step_y (Optional) sum_col_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] sum_col_offset_first_element_in_bytes (Optional) The offset of the first element in the source tensor |
| * @param[in] sum_row_ptr (Optional) Pointer to the source tensor. Supported data type: S32 |
| * @param[in] sum_row_stride_x (Optional) Stride of the source tensor in X dimension (in bytes) |
| * @param[in] sum_row_step_x (Optional) sum_row_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] sum_row_stride_y (Optional) Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] sum_row_step_y (Optional) sum_row_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] sum_row_offset_first_element_in_bytes (Optional) The offset of the first element in the source tensor |
| * @param[in] biases_ptr (Optional) Pointer to the biases tensor. Supported data type: S32 |
| * @param[in] biases_stride_x (Optional) Stride of the biases tensor in X dimension (in bytes) |
| * @param[in] biases_step_x (Optional) biases_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] biases_offset_first_element_in_bytes (Optional) The offset of the first element in the biases tensor |
| * @param[in] result_multipliers_ptr (Optional) Pointer to the output multipliers vector for per-channel quantization. Supported data types: S32 |
| * @param[in] result_multipliers_stride_x (Optional) Stride of the output multipliers vector in X dimension (in bytes) |
| * @param[in] result_multipliers_step_x (Optional) output_multipliers_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] result_multipliers_offset_first_element_in_bytes (Optional) The offset of the first element in the output multipliers vector |
| * @param[in] result_shifts_ptr (Optional) Pointer to the output shifts vector for per-channel quantization. Supported data types: S32 |
| * @param[in] result_shifts_stride_x (Optional) Stride of the output shifts vector in X dimension (in bytes) |
| * @param[in] result_shifts_step_x (Optional) output_shifts_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] result_shifts_offset_first_element_in_bytes (Optional) The offset of the first element in the output shifts vector |
| */ |
| __kernel void gemmlowp_mm_reshaped_only_rhs_t_fused_output_stage_fixedpoint(IMAGE_DECLARATION(lhs), |
| IMAGE_DECLARATION(rhs), |
| IMAGE_DECLARATION(dst), |
| uint lhs_stride_z, |
| uint rhs_stride_z, |
| uint dst_stride_z |
| #if defined(REINTERPRET_INPUT_AS_3D) |
| , |
| uint lhs_cross_plane_pad |
| #endif // REINTERPRET_INPUT_AS_3D |
| #if defined(REINTERPRET_OUTPUT_AS_3D) |
| , |
| uint dst_cross_plane_pad |
| #endif // REINTERPRET_OUTPUT_AS_3D |
| #if defined(A_OFFSET) |
| , |
| IMAGE_DECLARATION(sum_col) |
| #endif // defined(A_OFFSET) |
| #if defined(B_OFFSET) |
| , |
| IMAGE_DECLARATION(sum_row) |
| #endif // defined(B_OFFSET) |
| #if defined(ADD_BIAS) |
| , |
| VECTOR_DECLARATION(biases) |
| #endif // defined(ADD_BIAS) |
| #if defined(PER_CHANNEL_QUANTIZATION) |
| , |
| VECTOR_DECLARATION(result_multipliers), |
| VECTOR_DECLARATION(result_shifts) |
| #endif // defined(PER_CHANNEL_QUANTIZATION) |
| ) |
| { |
| // Block size |
| #define RHS_BLOCK_SIZE ((K0) * (N0)) |
| |
| // RHS offset and step X |
| #if defined(RHS_INTERLEAVE) |
| #define RHS_OFFSET_X (K0) |
| #define RHS_STEP_X ((K0) * (H0)) |
| #define RHS_STEP_LOOP (1) |
| #else // defined(RHS_INTERLEAVE) |
| #define RHS_OFFSET_X (RHS_BLOCK_SIZE) |
| #define RHS_STEP_X (K0) |
| #define RHS_STEP_LOOP (H0) |
| #endif // defined(RHS_INTERLEAVE) |
| |
| uint x = get_global_id(0); |
| uint y = get_global_id(1); |
| uint z = get_global_id(2); |
| |
| #if defined(DUMMY_WORK_ITEMS) |
| if((x * N0 >= N) || (y * M0 >= M)) |
| { |
| return; |
| } |
| #endif // defined(DUMMY_WORK_ITEMS) |
| |
| // Compute LHS matrix address |
| uint lhs_offset = lhs_offset_first_element_in_bytes + COMPUTE_M0_START_ROW(y, M0, PARTIAL_STORE_M0) * (uint)lhs_stride_y; |
| |
| // Compute RHS matrix address |
| uint rhs_offset = rhs_offset_first_element_in_bytes + (x % H0) * (uint)RHS_OFFSET_X + (x / (uint)H0) * rhs_stride_y; |
| |
| #if defined(MATRIX_B_DEPTH) |
| // Do not slide matrix B if the matrix B has 3 dimensions and matrix A more than 3 |
| rhs_offset += (z % MATRIX_B_DEPTH) * rhs_stride_z; |
| #else // defined(MATRIX_B_DEPTH) |
| rhs_offset += z * rhs_stride_z; |
| #endif // defined(MATRIX_B_DEPTH) |
| |
| REPEAT_VAR_INIT_TO_CONST(8, uint, zlhs, 0); //uint zout0=0,zout1=0,zout2=0,... zout7=0; |
| REPEAT_VAR_INIT_TO_CONST(16, uint, zrhs, 0); |
| |
| #if defined(REINTERPRET_INPUT_AS_3D) |
| // The plane (zlhs) is calculated dividing M (y * M0) by HEIGHT_GEMM3D |
| CALCULATE_Z_OFFSET(M0, uint, zlhs, COMPUTE_M0_START_ROW(y, M0, PARTIAL_STORE_M0), HEIGHT_GEMM3D, DEPTH_GEMM3D, lhs_cross_plane_pad, lhs_stride_y); |
| |
| // Add offset for batched GEMM. The batches will be in the fourth dimension and for this reason we |
| // multiply lhs_stride_z by DEPTH_GEMM3D |
| lhs_offset += z * lhs_stride_z * DEPTH_GEMM3D; |
| |
| #else // defined(REINTERPRET_INPUT_AS_3D) |
| |
| // Add offset for batched GEMM |
| lhs_offset += z * lhs_stride_z; |
| |
| #endif // defined(REINTERPRET_INPUT_AS_3D) |
| |
| // Initialize the accumulators |
| REPEAT_VAR_INIT_TO_CONST(M0, VEC_DATA_TYPE(ACC_DATA_TYPE, N0), c, 0); //VEC_DATA_TYPE(ACC_DATA_TYPE, N0) c0=0,c1=0,c2=0,... c(N0-1)=0; |
| |
| int i = 0; |
| for(; i <= (K - K0); i += K0) |
| { |
| // Load values from LHS matrix |
| LOAD_BLOCK(M0, K0, DATA_TYPE, a, lhs_ptr, lhs_offset, lhs_stride_y, zlhs); |
| |
| // Load values from RHS matrix |
| LOAD_BLOCK(N0, K0, DATA_TYPE, b, rhs_ptr, rhs_offset, RHS_STEP_X, zrhs); |
| |
| // Partial matrix multiplication M0,N0,K0 |
| ARM_MM_K0XN0XM0(M0, N0, K0, a, b, c); |
| |
| lhs_offset += K0; |
| rhs_offset += N0 * RHS_STEP_X * RHS_STEP_LOOP; |
| } |
| // Left-over accumulations |
| for(; i < K; ++i) |
| { |
| // Load values from LHS matrix |
| LOAD_BLOCK(M0, 1, DATA_TYPE, a, lhs_ptr, lhs_offset, lhs_stride_y, zlhs); |
| |
| // Load values from RHS reshaped matrix |
| LOAD_BLOCK(N0, 1, DATA_TYPE, b, rhs_ptr, rhs_offset, RHS_STEP_X, zrhs); |
| |
| ARM_MM_K0XN0XM0(M0, N0, 1, a, b, c); |
| lhs_offset += 1; |
| rhs_offset += 1; |
| } |
| // Result of MM is of type DATA_TYPE |
| __global uchar *dst_addr = dst_ptr + dst_offset_first_element_in_bytes + (x * (uint)N0 * sizeof(DATA_TYPE)) + (COMPUTE_M0_START_ROW(y, M0, PARTIAL_STORE_M0) * dst_stride_y); |
| |
| REPEAT_VAR_INIT_TO_CONST(8, uint, zout, 0); //uint zout0=0,zout1=0,zout2=0,... zout7=0; |
| |
| #if defined(REINTERPRET_OUTPUT_AS_3D) |
| // The plane (zout) is calculated dividing M (y * M0) by HEIGHT_GEMM3D |
| CALCULATE_Z_OFFSET(M0, uint, zout, COMPUTE_M0_START_ROW(y, M0, PARTIAL_STORE_M0), HEIGHT_GEMM3D, DEPTH_GEMM3D, dst_cross_plane_pad, dst_stride_y); |
| |
| // Add offset for batched GEMM. The batches will be in the fourth dimension and for this reason we |
| // multiply dst_stride_z by DEPTH_GEMM3D |
| dst_addr += z * dst_stride_z * DEPTH_GEMM3D; |
| |
| #else // defined(REINTERPRET_OUTPUT_AS_3D) |
| |
| // Add offset for batched GEMM |
| dst_addr += z * dst_stride_z; |
| |
| #endif // defined(REINTERPRET_OUTPUT_AS_3D) |
| |
| // Convert result of matrix multiplication to S32 |
| REPEAT_VAR_INIT_CONVERT_SAT(M0, VEC_DATA_TYPE(int, N0), c, c_int); |
| |
| // Offset contribution: c += (A_OFFSET * sum_col) + (B_OFFSET * sum_row) + K_OFFSET; |
| REPEAT_VAR_INIT_TO_CONST(M0, VEC_DATA_TYPE(int, N0), offset_s32_, K_OFFSET); |
| |
| #if defined(A_OFFSET) |
| // Compute the offset contribution due to A_OFFSET |
| __global uchar *sum_col_addr = sum_col_ptr + sum_col_offset_first_element_in_bytes + (x * (uint)N0) * sizeof(int); |
| |
| #if defined(SUM_COL_HAS_BATCHES) |
| sum_col_addr += z * sum_col_stride_y; |
| #endif // defined(SUM_COL_HAS_BATCHES) |
| VEC_DATA_TYPE(int, N0) |
| a_offset_s32 = VLOAD(N0)(0, (__global int *)sum_col_addr); |
| a_offset_s32 *= (VEC_DATA_TYPE(int, N0))A_OFFSET; |
| |
| REPEAT_ADD_VECTOR_TO_VAR(M0, offset_s32_, a_offset_s32); |
| #endif // defined(A_OFFSET) |
| |
| #if defined(B_OFFSET) |
| // Compute the offset contribution due to B_OFFSET |
| // Note: The sum_row tensor is generated through CLGEMMLowpMatrixAReductionKernel which |
| // does not introduce paddings. For this reason is safe to access the tensor in this manner |
| // without considering that the coordinate "y" could come from an input 3D tensor |
| __global uchar *sum_row_addr = sum_row_ptr + sum_row_offset_first_element_in_bytes + (COMPUTE_M0_START_ROW(y, (uint)M0, PARTIAL_STORE_M0)) * sizeof(int) + z * sum_row_stride_y; |
| |
| LOAD_SCALAR_AS_VECTOR(M0, N0, int, b_offset_s32_, sum_row_addr, 0, sum_row_stride_x); |
| |
| REPEAT_MLA_VAR_WITH_CONST_VEC(M0, offset_s32_, b_offset_s32_, (VEC_DATA_TYPE(int, N0))B_OFFSET); |
| #endif // defined(B_OFFSET) |
| |
| #if defined(ADD_BIAS) |
| // Add bias |
| __global uchar *bias_addr = biases_ptr + biases_offset_first_element_in_bytes + (x * (uint)N0) * sizeof(int); |
| |
| VEC_DATA_TYPE(int, N0) |
| bias_values = VLOAD(N0)(0, (__global int *)bias_addr); |
| REPEAT_ADD_VECTOR_TO_VAR(M0, offset_s32_, bias_values); |
| #endif // defined(ADD_BIAS) |
| |
| REPEAT_ADD_TWO_VARS(M0, c_int, offset_s32_); |
| |
| // Multiply by result_mult_int and shift |
| #if defined(PER_CHANNEL_QUANTIZATION) |
| __global uchar *result_multipliers_addr = result_multipliers_ptr + result_multipliers_offset_first_element_in_bytes + (x * (uint)N0) * sizeof(int); |
| __global uchar *result_shifts_addr = result_shifts_ptr + result_shifts_offset_first_element_in_bytes + (x * (uint)N0) * sizeof(int); |
| |
| VEC_DATA_TYPE(int, N0) |
| res_mul = VLOAD(N0)(0, (__global int *)result_multipliers_addr); |
| VEC_DATA_TYPE(int, N0) |
| res_shift = VLOAD(N0)(0, (__global int *)result_shifts_addr); |
| |
| REPEAT_ASYMM_MULT_BY_QUANT_MULTIPLIER_PER_CHANNEL(M0, N0, c_int, res_mul, res_shift); |
| #else // defined(PER_CHANNEL_QUANTIZATION) |
| |
| #if RESULT_SHIFT < 0 |
| REPEAT_ASYMM_MULT_BY_QUANT_MULTIPLIER_GREATER_THAN_ONE(M0, N0, c_int, RESULT_MULTIPLIER, RESULT_SHIFT); |
| #else // RESULT_SHIFT >= 0 |
| REPEAT_ASYMM_MULT_BY_QUANT_MULTIPLIER_LESS_THAN_ONE(M0, N0, c_int, RESULT_MULTIPLIER, RESULT_SHIFT); |
| #endif // RESULT_SHIFT < 0 |
| |
| #endif // defined(PER_CHANNEL_QUANTIZATION) |
| |
| // Add the offset terms to GEMM's result |
| REPEAT_ADD_CONST_TO_VAR(M0, VEC_DATA_TYPE(int, N0), c_int, RESULT_OFFSET); |
| |
| #if defined(MIN_BOUND) |
| REPEAT_MAX_CONST_VAR(M0, VEC_DATA_TYPE(int, N0), c_int, MIN_BOUND); |
| #endif // defined(MIN_BOUND) |
| #if defined(MAX_BOUND) |
| REPEAT_MIN_CONST_VAR(M0, VEC_DATA_TYPE(int, N0), c_int, MAX_BOUND); |
| #endif // defined(MAX_BOUND) |
| |
| // Convert and store output block |
| const bool cond_y = y == 0; |
| const bool cond_x = ((x + 1) * N0 >= N); |
| |
| // Store output block |
| REPEAT_VAR_INIT_CONVERT_SAT(M0, VEC_DATA_TYPE(DATA_TYPE, N0), c_int, c_lp); |
| STORE_BLOCK_BOUNDARY_AWARE(M0, N0, DATA_TYPE, c_lp, dst_addr, dst_stride_y, zout, PARTIAL_STORE_M0, PARTIAL_STORE_N0, cond_y, cond_x); |
| |
| #undef RHS_BLOCK_SIZE |
| #undef RHS_OFFSET_X |
| #undef RHS_STEP_X |
| } |
| #endif // defined(RESULT_OFFSET) && defined(RESULT_SHIFT) && defined(RESULT_MULTIPLIER) |
| #endif // defined(M0) && defined(N0) && defined(K0) && defined(H0) && defined(K) && defined(PARTIAL_STORE_M0) && defined(PARTIAL_STORE_N0) |
| |
| #if defined(M0) && defined(N0) && defined(K0) && defined(K) && defined(PARTIAL_STORE_M0) && defined(PARTIAL_STORE_N0) |
| |
| /** This OpenCL kernel computes the matrix multiplication between 2 matrices. |
| * The LHS matrix is NOT reshaped |
| * The RHS matrix is NOT reshaped |
| * |
| * @note The input data type must be passed at compile time using -DDATA_TYPE (i.e. -DDATA_TYPE=uchar) |
| * @note The accumulator data type must be passed at compile time using -DACC_DATA_TYPE (i.e. -DACC_DATA_TYPE=uint) |
| * @note The number of columns of LHS matrix must be passed at compile time using -DK (i.e. -DK=64) |
| * @note The number of M0 rows to process must be passed at compile time using -DM0 (i.e. -DM0=2) |
| * @note The number of N0 columns to process must be passed at compile time using -DN0 (i.e. -DN0=2) |
| * @note The number of K0 partial accumulations must be passed at compile time using -DK0 (i.e., -DK0=2) |
| * @note Only the following configurations of M0, N0 and K0 are currently supported: |
| * - M0 = 1, 2, 3, 4, 5, 6, 7, 8 |
| * - N0 = 2, 3, 4, 8, 16 |
| * - K0 = 2, 3, 4, 8, 16 |
| * |
| * @note In case the input or output have to be reinterpreted as a 3D tensor, the following information must be passed at compile time: |
| * -# REINTERPRET_INPUT_AS_3D: To reinterpret the input as 3D |
| * -# REINTERPRET_OUTPUT_AS_3D: To reinterpret the output as 3D |
| * -# HEIGHT_GEMM3D: The height of the output in case it has to be reinterpreted as a 3D tensor. |
| * -# DEPTH_GEMM3D: The depth of the output in case it has to be reinterpreted as a 3D tensor |
| * (HEIGHT_GEMM3D * DEPTH_GEMM3D) = columns LHS matrix |
| * |
| * @param[in] lhs_ptr Pointer to the LHS reshaped matrix. Supported data type: QASYMM8 |
| * @param[in] lhs_stride_x Stride of the LHS reshaped matrix in X dimension (in bytes) |
| * @param[in] lhs_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] lhs_stride_y Stride of the LHS reshaped matrix in Y dimension (in bytes) |
| * @param[in] lhs_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] lhs_offset_first_element_in_bytes The offset of the first element in the LHS reshaped matrix |
| * @param[in] rhs_ptr Pointer to the RHS reshaped matrix. Supported data type: same as @p lhs_ptr |
| * @param[in] rhs_stride_x Stride of the RHS reshaped matrix in X dimension (in bytes) |
| * @param[in] rhs_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] rhs_stride_y Stride of the RHS reshaped matrix in Y dimension (in bytes) |
| * @param[in] rhs_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] rhs_offset_first_element_in_bytes The offset of the first element in the RHS reshaped matrix |
| * @param[out] dst_ptr Pointer to the destination matrix Supported data type: S32 |
| * @param[in] dst_stride_x Stride of the destination matrix in X dimension (in bytes) |
| * @param[in] dst_step_x dst_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] dst_stride_y Stride of the destination matrix in Y dimension (in bytes) |
| * @param[in] dst_step_y dst_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] dst_offset_first_element_in_bytes The offset of the first element in the destination matrix |
| * @param[in] lhs_stride_z Stride of the LHS reshaped matrix in Z dimension (in bytes) |
| * @param[in] rhs_stride_z Stride of the RHS reshaped matrix in Z dimension (in bytes) |
| * @param[in] dst_stride_z Stride of the destination tensor in Z dimension (in bytes) |
| * @param[in] lhs_cross_plane_pad (Optional) Bottom paddings for LHS matrix in unit of elements (only if defined REINTERPRET_INPUT_AS_3D) |
| * @param[in] dst_cross_plane_pad (Optional) Bottom paddings for the output matrix in unit of elements (only if defined REINTERPRET_OUTPUT_AS_3D) |
| */ |
| __kernel void gemmlowp_mm_native(IMAGE_DECLARATION(lhs), |
| IMAGE_DECLARATION(rhs), |
| IMAGE_DECLARATION(dst), |
| uint lhs_stride_z, |
| uint rhs_stride_z, |
| uint dst_stride_z |
| #if defined(REINTERPRET_INPUT_AS_3D) |
| , |
| uint lhs_cross_plane_pad |
| #endif // REINTERPRET_INPUT_AS_3D |
| #if defined(REINTERPRET_OUTPUT_AS_3D) |
| , |
| uint dst_cross_plane_pad |
| #endif // REINTERPRET_OUTPUT_AS_3D |
| ) |
| { |
| uint x = get_global_id(0); |
| uint y = get_global_id(1); |
| uint z = get_global_id(2); |
| |
| #if defined(DUMMY_WORK_ITEMS) |
| if((x * N0 >= N) || (y * M0 >= M)) |
| { |
| return; |
| } |
| #endif // defined(DUMMY_WORK_ITEMS) |
| |
| // Compute LHS matrix address |
| uint lhs_offset = lhs_offset_first_element_in_bytes + COMPUTE_M0_START_ROW(y, M0, PARTIAL_STORE_M0) * (uint)lhs_stride_y; |
| |
| // Compute RHS matrix address |
| uint rhs_offset = rhs_offset_first_element_in_bytes + x * N0 * sizeof(DATA_TYPE); |
| |
| #if defined(MATRIX_B_DEPTH) |
| // Do not slide matrix B if the matrix B has 3 dimensions and matrix A more than 3 |
| rhs_offset += (z % MATRIX_B_DEPTH) * rhs_stride_z; |
| #else // defined(MATRIX_B_DEPTH) |
| rhs_offset += z * rhs_stride_z; |
| #endif // defined(MATRIX_B_DEPTH) |
| |
| REPEAT_VAR_INIT_TO_CONST(8, uint, zlhs, 0); |
| REPEAT_VAR_INIT_TO_CONST(16, uint, zrhs, 0); |
| |
| #if defined(REINTERPRET_INPUT_AS_3D) |
| // The plane (zlhs) is calculated dividing M (y * M0) by HEIGHT_GEMM3D |
| CALCULATE_Z_OFFSET(M0, uint, zlhs, COMPUTE_M0_START_ROW(y, M0, PARTIAL_STORE_M0), HEIGHT_GEMM3D, DEPTH_GEMM3D, lhs_cross_plane_pad, lhs_stride_y); |
| |
| // Add offset for batched GEMM. The batches will be in the fourth dimension and for this reason we |
| // multiply lhs_stride_z by DEPTH_GEMM3D |
| lhs_offset += z * lhs_stride_z * DEPTH_GEMM3D; |
| |
| #else // defined(REINTERPRET_INPUT_AS_3D) |
| |
| // Add offset for batched GEMM |
| lhs_offset += z * lhs_stride_z; |
| |
| #endif // defined(REINTERPRET_INPUT_AS_3D) |
| |
| // Initialize the accumulators |
| REPEAT_VAR_INIT_TO_CONST(M0, VEC_DATA_TYPE(ACC_DATA_TYPE, N0), c, 0); //VEC_DATA_TYPE(ACC_DATA_TYPE, N0) c0=0,c1=0,c2=0,... c(M0-1)=0; |
| |
| int i = 0; |
| |
| for(; i <= (K - K0); i += K0) |
| { |
| // Load values from LHS matrix |
| LOAD_BLOCK(M0, K0, DATA_TYPE, a, lhs_ptr, lhs_offset, lhs_stride_y, zlhs); |
| |
| // Load values from RHS matrix |
| LOAD_BLOCK(K0, N0, DATA_TYPE, b, rhs_ptr, rhs_offset, rhs_stride_y, zrhs); |
| |
| // Partial matrix multiplication M0,N0,K0 |
| #if(GPU_ARCH == GPU_ARCH_MIDGARD) |
| ARM_MM_NATIVE_N0XK0XM0(VEC_DATA_TYPE(ACC_DATA_TYPE, N0), M0, K0, a, b, c); |
| #else // GPU_ARCH == GPU_ARCH_MIDGARD |
| // Transpose the values from RHS matrix |
| TRANSPOSE_K0XN0(K0, N0, b_t, b, DATA_TYPE); |
| |
| ARM_MM_K0XN0XM0(M0, N0, K0, a, b_t, c); |
| #endif // GPU_ARCH == GPU_ARCH_MIDGARD |
| |
| // Update the offset |
| lhs_offset += K0; |
| rhs_offset += K0 * rhs_stride_y; |
| } |
| |
| // Left-over for loop |
| for(; i < K; ++i) |
| { |
| // Load values from LHS matrix |
| LOAD_BLOCK(M0, 1, DATA_TYPE, a, lhs_ptr, lhs_offset, lhs_stride_y, zlhs); |
| |
| // Load values from RHS matrix |
| LOAD_BLOCK(1, N0, DATA_TYPE, b, rhs_ptr, rhs_offset, rhs_stride_y, zrhs); |
| |
| // Partial matrix multiplication M0,N0,1 |
| #if(GPU_ARCH == GPU_ARCH_MIDGARD) |
| ARM_MM_NATIVE_N0XK0XM0(VEC_DATA_TYPE(ACC_DATA_TYPE, N0), M0, 1, a, b, c); |
| #else // GPU_ARCH == GPU_ARCH_MIDGARD |
| // Transpose the values from RHS matrix |
| TRANSPOSE_K0XN0(1, N0, b_t, b, DATA_TYPE); |
| |
| ARM_MM_K0XN0XM0(M0, N0, 1, a, b_t, c); |
| #endif // GPU_ARCH == GPU_ARCH_MIDGARD |
| |
| // Update the offset |
| lhs_offset += 1; |
| rhs_offset += rhs_stride_y; |
| } |
| |
| __global uchar *dst_addr = dst_ptr + dst_offset_first_element_in_bytes + (x * (uint)N0 * sizeof(int)) + (COMPUTE_M0_START_ROW(y, M0, PARTIAL_STORE_M0) * dst_stride_y); |
| |
| REPEAT_VAR_INIT_TO_CONST(M0, uint, zout, 0); //uint zout0=0,zout1=0,zout2=0,... zout7=0; |
| |
| #if defined(REINTERPRET_OUTPUT_AS_3D) |
| // The plane (zout) is calculated dividing M (y * M0) by HEIGHT_GEMM3D |
| CALCULATE_Z_OFFSET(M0, uint, zout, COMPUTE_M0_START_ROW(y, M0, PARTIAL_STORE_M0), HEIGHT_GEMM3D, DEPTH_GEMM3D, dst_cross_plane_pad, dst_stride_y); |
| |
| // Add offset for batched GEMM. The batches will be in the fourth dimension and for this reason we |
| // multiply dst_stride_z by DEPTH_GEMM3D |
| dst_addr += z * dst_stride_z * DEPTH_GEMM3D; |
| |
| #else // defined(REINTERPRET_OUTPUT_AS_3D) |
| |
| // Add offset for batched GEMM |
| dst_addr += z * dst_stride_z; |
| |
| #endif // defined(REINTERPRET_OUTPUT_AS_3D) |
| const bool cond_y = y == 0; |
| const bool cond_x = ((x + 1) * N0 >= N); |
| |
| // Convert and store output block |
| REPEAT_VAR_INIT_CONVERT(M0, VEC_DATA_TYPE(int, N0), c, res); // resN = CONVERT(cN, VEC_DATA_TYPE(int, N0)); |
| STORE_BLOCK_BOUNDARY_AWARE(M0, N0, int, res, dst_addr, dst_stride_y, zout, PARTIAL_STORE_M0, PARTIAL_STORE_N0, cond_y, cond_x); |
| } |
| #endif // defined(M0) && defined(N0) && defined(K0) && defined(K) && defined(PARTIAL_STORE_M0) && defined(PARTIAL_STORE_N0) |
| |
| #if defined(COLS_A) |
| /** OpenCL kernel used to compute the row-vectors of sums of all the entries in each row of Matrix A. |
| * It is also possible to multiply each reduced row by a scalar value, if SCALAR is passed at compile time. |
| * |
| * @note This stage is needed to handle the offset of matrix product |
| * https://github.com/google/gemmlowp/blob/master/doc/low-precision.md |
| * |
| * @attention The number of matrix A columns needs to be passed at compile time using -DCOLS_A |
| * @note The input data type must be passed at compile time using -DDATA_TYPE (i.e. -DDATA_TYPE=uchar) |
| * @note The data type for the accumulation must be passed at compile time using -DACC_DATA_TYPE (i.e. -DACC_DATA_TYPE=uint) |
| * @note In case of scaling the scalar value must be passed at compile time using -DSCALAR (e.g. -DSCALAR=3) |
| * |
| * @param[in] src_ptr Pointer to the source tensor. Supported data type: QASYMM8/QASYMM8_SIGNED/QSYMM8 |
| * @param[in] src_stride_x Stride of the source tensor in X dimension (in bytes) |
| * @param[in] src_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] src_stride_y Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] src_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] src_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] src_step_z src_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] src_offset_first_element_in_bytes The offset of the first element in the source tensor |
| * @param[out] dst_ptr Pointer to the destination tensor Supported data type: S32 |
| * @param[in] dst_stride_x Stride of the destination tensor in X dimension (in bytes) |
| * @param[in] dst_step_x dst_gx_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] dst_stride_y Stride of the destination tensor in Y dimension (in bytes) |
| * @param[in] dst_step_y dst_gx_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] dst_offset_first_element_in_bytes The offset of the first element in the destination tensor |
| */ |
| __kernel void gemmlowp_matrix_a_reduction(TENSOR3D_DECLARATION(src), |
| IMAGE_DECLARATION(dst)) |
| { |
| // Compute source and destination addresses |
| Tensor3D src = CONVERT_TO_TENSOR3D_STRUCT(src); |
| Image dst = CONVERT_TO_IMAGE_STRUCT(dst); |
| |
| VEC_DATA_TYPE(ACC_DATA_TYPE, 4) |
| sum_row_32 = (VEC_DATA_TYPE(ACC_DATA_TYPE, 4))0; |
| ACC_DATA_TYPE sum_row = 0; |
| |
| __global const DATA_TYPE *matrix_a = (__global const DATA_TYPE *)(src.ptr + get_global_id(0) * src_stride_y + get_global_id(1) * src_stride_z); |
| |
| int i = 0; |
| |
| // This for loop performs 16 accumulations |
| for(; i <= ((int)COLS_A - 16); i += 16) |
| { |
| const VEC_DATA_TYPE(DATA_TYPE, 16) a0 = vload16(0, matrix_a + i); |
| |
| sum_row_32 += CONVERT(a0.s0123, VEC_DATA_TYPE(ACC_DATA_TYPE, 4)) + CONVERT(a0.s4567, VEC_DATA_TYPE(ACC_DATA_TYPE, 4)) + CONVERT(a0.s89AB, VEC_DATA_TYPE(ACC_DATA_TYPE, 4)) + CONVERT(a0.sCDEF, |
| VEC_DATA_TYPE(ACC_DATA_TYPE, 4)); |
| } |
| |
| // This for loop performs the leftover accumulations |
| for(; i < COLS_A; ++i) |
| { |
| sum_row += (ACC_DATA_TYPE)matrix_a[i]; |
| } |
| |
| sum_row += sum_row_32.s0 + sum_row_32.s1 + sum_row_32.s2 + sum_row_32.s3; |
| |
| #if defined(SCALAR) |
| sum_row *= (int)SCALAR; |
| #endif // defined(SCALAR) |
| *((__global int *)dst.ptr) = (int)sum_row; |
| } |
| |
| #if defined(ARM_COMPUTE_OPENCL_DOT8_ENABLED) && defined(cl_arm_integer_dot_product_int8) |
| /** OpenCL kernel used to compute the row-vectors of sums of all the entries in each row of Matrix A using the arm dot product instruction. |
| * It is also possible to multiply each reduced row by a scalar value, if SCALAR is passed at compile time. |
| * |
| * @note This stage is needed to handle the offset of matrix product |
| * https://github.com/google/gemmlowp/blob/master/doc/low-precision.md |
| * |
| * @attention The number of matrix A columns needs to be passed at compile time using -DCOLS_A |
| * @note The input data type must be passed at compile time using -DDATA_TYPE (i.e. -DDATA_TYPE=uchar) |
| * @note The data type for the accumulation must be passed at compile time using -DACC_DATA_TYPE (i.e. -DACC_DATA_TYPE=uint) |
| * @note In case of scaling the scalar value must be passed at compile time using -DSCALAR (e.g. -DSCALAR=3) |
| * |
| * @param[in] src_ptr Pointer to the source tensor. Supported data type: QASYMM8/QASYMM8_SIGNED/QSYMM8 |
| * @param[in] src_stride_x Stride of the source tensor in X dimension (in bytes) |
| * @param[in] src_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] src_stride_y Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] src_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] src_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] src_step_z src_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] src_offset_first_element_in_bytes The offset of the first element in the source tensor |
| * @param[out] dst_ptr Pointer to the destination tensor Supported data type: S32 |
| * @param[in] dst_stride_x Stride of the destination tensor in X dimension (in bytes) |
| * @param[in] dst_step_x dst_gx_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] dst_stride_y Stride of the destination tensor in Y dimension (in bytes) |
| * @param[in] dst_step_y dst_gx_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] dst_offset_first_element_in_bytes The offset of the first element in the destination tensor |
| */ |
| __kernel void gemmlowp_matrix_a_reduction_dot8(TENSOR3D_DECLARATION(src), |
| IMAGE_DECLARATION(dst)) |
| { |
| // Compute source and destination addresses |
| Tensor3D src = CONVERT_TO_TENSOR3D_STRUCT(src); |
| Image dst = CONVERT_TO_IMAGE_STRUCT(dst); |
| |
| ACC_DATA_TYPE sum_row = 0; |
| |
| __global const DATA_TYPE *matrix_a = (__global const DATA_TYPE *)(src.ptr + get_global_id(0) * src_stride_y + get_global_id(1) * src_stride_z); |
| |
| int i = 0; |
| |
| // This for loop performs 16 accumulations |
| for(; i <= ((int)COLS_A - 32); i += 32) |
| { |
| VEC_DATA_TYPE(DATA_TYPE, 16) |
| a0 = vload16(0, matrix_a + i); |
| |
| sum_row += arm_dot(a0.s0123, (VEC_DATA_TYPE(DATA_TYPE, 4))(1)); |
| sum_row += arm_dot(a0.s4567, (VEC_DATA_TYPE(DATA_TYPE, 4))(1)); |
| sum_row += arm_dot(a0.s89AB, (VEC_DATA_TYPE(DATA_TYPE, 4))(1)); |
| sum_row += arm_dot(a0.sCDEF, (VEC_DATA_TYPE(DATA_TYPE, 4))(1)); |
| |
| a0 = vload16(1, matrix_a + i); |
| |
| sum_row += arm_dot(a0.s0123, (VEC_DATA_TYPE(DATA_TYPE, 4))(1)); |
| sum_row += arm_dot(a0.s4567, (VEC_DATA_TYPE(DATA_TYPE, 4))(1)); |
| sum_row += arm_dot(a0.s89AB, (VEC_DATA_TYPE(DATA_TYPE, 4))(1)); |
| sum_row += arm_dot(a0.sCDEF, (VEC_DATA_TYPE(DATA_TYPE, 4))(1)); |
| } |
| |
| // This for loop performs the leftover accumulations |
| for(; i < COLS_A; ++i) |
| { |
| sum_row += (ACC_DATA_TYPE)matrix_a[i]; |
| } |
| |
| #if defined(SCALAR) |
| sum_row *= (int)SCALAR; |
| #endif // defined(SCALAR) |
| *((__global int *)dst.ptr) = (int)sum_row; |
| } |
| #endif // defined(ARM_COMPUTE_OPENCL_DOT8_ENABLED) && defined(cl_arm_integer_dot_product_int8) |
| #endif // defined(COLS_A) |
| |
| #if defined(COLS_B) && defined(ROWS_B) && defined(VEC_SIZE) && defined(VEC_SIZE_LEFTOVER) |
| /** OpenCL kernel used to compute the row-vectors of sums of all the entries in each column of Matrix B. |
| * It is also possible to multiply each reduced column by a scalar value, if SCALAR is passed at compile time. |
| * |
| * @note This stage is needed to handle the offset of matrix product |
| * https://github.com/google/gemmlowp/blob/master/doc/low-precision.md |
| * |
| * @attention The number of matrix B columns and rows needs to be passed at compile time using -DCOLS_B and -DROWS_B |
| * @note The input data type must be passed at compile time using -DDATA_TYPE (i.e. -DDATA_TYPE=uchar) |
| * @note The data type for the accumulation must be passed at compile time using -DACC_DATA_TYPE (i.e. -DACC_DATA_TYPE=uint) |
| * @note In case of scaling the scalar value must be passed at compile time using -DSCALAR (i.e. -DSCALAR=3) |
| * @note Vector size should be given as a preprocessor argument using -DVEC_SIZE=size. e.g. -DVEC_SIZE=16 |
| * @note Leftover vector size has to be passed at compile time using -DVEC_SIZE_LEFTOVER. e.g. -DVEC_SIZE_LEFTOVER=3. It is defined as the remainder between the input's first dimension and VEC_SIZE |
| * |
| * @param[in] src_ptr Pointer to the source tensor. Supported data type: QASYMM8/QASYMM8_SIGNED/QSYMM8/QSYMM8_PER_CHANNEL |
| * @param[in] src_stride_x Stride of the source tensor in X dimension (in bytes) |
| * @param[in] src_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] src_stride_y Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] src_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] src_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] src_step_z src_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] src_offset_first_element_in_bytes The offset of the first element in the source tensor |
| * @param[out] dst_ptr Pointer to the destination tensor Supported data type: S32 |
| * @param[in] dst_stride_x Stride of the destination tensor in X dimension (in bytes) |
| * @param[in] dst_step_x dst_gx_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] dst_stride_y Stride of the destination tensor in Y dimension (in bytes) |
| * @param[in] dst_step_y dst_gx_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] dst_offset_first_element_in_bytes The offset of the first element in the destination tensor |
| */ |
| __kernel void gemmlowp_matrix_b_reduction(TENSOR3D_DECLARATION(src), |
| IMAGE_DECLARATION(dst)) |
| { |
| // Compute source and destination addresses |
| const uint x_offs = max((int)(get_global_id(0) * VEC_SIZE - (VEC_SIZE - VEC_SIZE_LEFTOVER) % VEC_SIZE), 0); |
| const uint y = get_global_id(1); |
| |
| __global const DATA_TYPE *matrix_b = (__global const DATA_TYPE *)(src_ptr + src_offset_first_element_in_bytes + x_offs * sizeof(DATA_TYPE) + y * src_step_y + y * src_stride_z); |
| __global uchar *dst_addr = dst_ptr + dst_offset_first_element_in_bytes + x_offs * sizeof(int) + y * dst_stride_y; |
| |
| VEC_DATA_TYPE(ACC_DATA_TYPE, VEC_SIZE) |
| sum_col_32 = (VEC_DATA_TYPE(ACC_DATA_TYPE, VEC_SIZE))0; |
| |
| int i = 0; |
| // This for loop performs 4 accumulations |
| for(; i <= ((int)ROWS_B - 4); i += 4) |
| { |
| const VEC_DATA_TYPE(DATA_TYPE, VEC_SIZE) |
| b0 = VLOAD(VEC_SIZE)(0, matrix_b + 0 * src_stride_y); |
| const VEC_DATA_TYPE(DATA_TYPE, VEC_SIZE) |
| b1 = VLOAD(VEC_SIZE)(0, matrix_b + 1 * src_stride_y); |
| const VEC_DATA_TYPE(DATA_TYPE, VEC_SIZE) |
| b2 = VLOAD(VEC_SIZE)(0, matrix_b + 2 * src_stride_y); |
| const VEC_DATA_TYPE(DATA_TYPE, VEC_SIZE) |
| b3 = VLOAD(VEC_SIZE)(0, matrix_b + 3 * src_stride_y); |
| |
| sum_col_32 += CONVERT(b0, VEC_DATA_TYPE(ACC_DATA_TYPE, VEC_SIZE)) + CONVERT(b1, VEC_DATA_TYPE(ACC_DATA_TYPE, VEC_SIZE)) + CONVERT(b2, VEC_DATA_TYPE(ACC_DATA_TYPE, VEC_SIZE)) + CONVERT(b3, |
| VEC_DATA_TYPE(ACC_DATA_TYPE, VEC_SIZE)); |
| |
| matrix_b += 4 * src_stride_y; |
| } |
| |
| // This for loop perfoms the leftover accumulations |
| for(; i < (int)ROWS_B; ++i) |
| { |
| const VEC_DATA_TYPE(DATA_TYPE, VEC_SIZE) |
| b0 = VLOAD(VEC_SIZE)(0, matrix_b); |
| |
| sum_col_32 += CONVERT(b0, VEC_DATA_TYPE(ACC_DATA_TYPE, VEC_SIZE)); |
| |
| matrix_b += src_stride_y; |
| } |
| |
| #if defined(SCALAR) |
| sum_col_32 *= (VEC_DATA_TYPE(ACC_DATA_TYPE, VEC_SIZE))SCALAR; |
| #endif // defined(SCALAR) |
| VEC_DATA_TYPE(int, VEC_SIZE) |
| res0 = CONVERT(sum_col_32, VEC_DATA_TYPE(int, VEC_SIZE)); |
| |
| STORE_VECTOR_SELECT(res, int, dst_addr, VEC_SIZE, VEC_SIZE_LEFTOVER, VEC_SIZE_LEFTOVER != 0 && get_global_id(0) == 0) |
| } |
| #endif // defined(COLS_B) && defined(ROWS_B) && defined(VEC_SIZE) && defined(VEC_SIZE_LEFTOVER) |
| |
| #endif // defined(DATA_TYPE) && defined(ACC_DATA_TYPE) |
| |
| #if defined(K_OFFSET) && defined(VEC_SIZE) && defined(VEC_SIZE_LEFTOVER) |
| |
| #define VEC_INT VEC_DATA_TYPE(int, VEC_SIZE) |
| |
| /* Helper function used to calculate the offset contribution after matrix multiplication. |
| * |
| * This kernel takes a final int32 accumulator value (the output of matrix multiplication), |
| * and calculates the offset contribution of matrix A and matrix B. |
| * |
| * @attention The k_offset = a_offset * b_offset * k (where k is the number of matrix A columns) needs to be passed at compile time using -DK_OFFSET (i.e. -DK_OFFSET=1200) |
| * @note In case the offset contribution due to a_offset is required, a_offset needs to be passed at compile time using -DA_OFFSET (i.e. -DA_OFFSET=1) |
| * @note In case the offset contribution due to b_offset is required, b_offset needs to be passed at compile time using -DB_OFFSET (i.e. -DB_OFFSET=6) |
| * @note In case sum_col has batches, -DSUM_COL_HAS_BATCHES must be passed at compile time. Usually if gemmlowp is used to accelerate convolution layer, sum_col will not have batches |
| * @note Vector size should be given as a preprocessor argument using -DVEC_SIZE=size. e.g. -DVEC_SIZE=16 |
| * @note Leftover vector size has to be passed at compile time using -DVEC_SIZE_LEFTOVER. e.g. -DVEC_SIZE_LEFTOVER=3. It is defined as the remainder between the input's first dimension and VEC_SIZE |
| * |
| * @param[in] x max((int)(get_global_id(0) * VEC_SIZE - (VEC_SIZE - VEC_SIZE_LEFTOVER) % VEC_SIZE), 0) |
| * @param[in] y get_global_id(1) |
| * @param[in] z get_global_id(2) |
| * @param[in] sum_col_ptr (Optional) Pointer to the source tensor. Supported data type: same as @p mm_result_ptr |
| * @param[in] sum_col_stride_x (Optional) Stride of the source tensor in X dimension (in bytes) |
| * @param[in] sum_col_step_x (Optional) sum_col_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] sum_col_stride_y (Optional) Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] sum_col_step_y (Optional) sum_col_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] sum_col_offset_first_element_in_bytes (Optional) The offset of the first element in the source tensor |
| * @param[in] sum_row_ptr (Optional) Pointer to the source tensor. Supported data type: same as @p mm_result_ptr |
| * @param[in] sum_row_stride_x (Optional) Stride of the source tensor in X dimension (in bytes) |
| * @param[in] sum_row_step_x (Optional) sum_row_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] sum_row_stride_y (Optional) Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] sum_row_step_y (Optional) sum_row_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] sum_row_offset_first_element_in_bytes (Optional) The offset of the first element in the source tensor |
| * @param[in] biases_ptr (Optional) Pointer to the biases tensor. Supported data type: same as @p src_ptr |
| * @param[in] biases_stride_x (Optional) Stride of the biases tensor in X dimension (in bytes) |
| * @param[in] biases_step_x (Optional) biases_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] biases_offset_first_element_in_bytes (Optional) The offset of the first element in the biases tensor |
| */ |
| inline VEC_INT offset_contribution( |
| int x, |
| int y, |
| int z |
| #if defined(A_OFFSET) |
| , |
| IMAGE_DECLARATION(sum_col) |
| #endif // defined(A_OFFSET) |
| #if defined(B_OFFSET) |
| , |
| IMAGE_DECLARATION(sum_row) |
| #endif // defined(B_OFFSET) |
| #if defined(ADD_BIAS) |
| , |
| VECTOR_DECLARATION(biases) |
| #endif // defined(ADD_BIAS) |
| ) |
| { |
| VEC_INT a_offset_s32 = (VEC_INT)0; |
| VEC_INT b_offset_s32 = (VEC_INT)0; |
| |
| int batch_id = z; |
| #if defined(DEPTH_INPUT3D) |
| batch_id /= (int)DEPTH_INPUT3D; |
| #endif // defined(DEPTH_INPUT3D) |
| |
| #if defined(A_OFFSET) |
| // Compute the offset contribution due to A_OFFSET |
| __global uchar *sum_col_addr = sum_col_ptr + sum_col_offset_first_element_in_bytes + x * sizeof(int); |
| |
| // Compute the offset contribution due to A_OFFSET |
| #if defined(SUM_COL_HAS_BATCHES) |
| a_offset_s32 = VLOAD(VEC_SIZE)(0, (__global int *)(sum_col_addr + batch_id * sum_col_stride_y)); |
| #else // defined(SUM_COL_HAS_BATCHES) |
| a_offset_s32 = VLOAD(VEC_SIZE)(0, (__global int *)sum_col_addr); |
| #endif // defined(SUM_COL_HAS_BATCHES) |
| |
| a_offset_s32 *= (VEC_INT)A_OFFSET; |
| #endif // defined(A_OFFSET) |
| |
| #if defined(B_OFFSET) |
| // Compute the offset contribution due to A_OFFSET |
| __global uchar *sum_row_addr = sum_row_ptr + sum_row_offset_first_element_in_bytes + y * sizeof(int); |
| |
| // Compute the offset contribution due to B_OFFSET |
| #if defined(HEIGHT_INPUT3D) && defined(DEPTH_INPUT3D) |
| b_offset_s32 = (VEC_INT) * (((__global int *)(sum_row_addr + batch_id * sum_row_stride_y)) + (z % (int)DEPTH_INPUT3D) * (int)HEIGHT_INPUT3D); |
| #else // defined(HEIGHT_INPUT3D) && defined(DEPTH_INPUT3D) |
| b_offset_s32 = (VEC_INT) * (((__global int *)(sum_row_addr + batch_id * sum_row_stride_y))); |
| #endif // defined(HEIGHT_INPUT3D) && defined(DEPTH_INPUT3D) |
| b_offset_s32 *= (VEC_INT)B_OFFSET; |
| #endif // defined(B_OFFSET) |
| |
| #if defined(ADD_BIAS) |
| // Add bias |
| __global uchar *bias_addr = biases_ptr + biases_offset_first_element_in_bytes + x * sizeof(int); |
| |
| VEC_INT biases_values = VLOAD(VEC_SIZE)(0, (__global int *)bias_addr); |
| b_offset_s32 += (VEC_INT)biases_values; |
| #endif // defined(ADD_BIAS) |
| |
| return (VEC_INT)K_OFFSET + a_offset_s32 + b_offset_s32; |
| } |
| |
| /* OpenCL kernel used to add the offset contribution after matrix multiplication. The computation is performed in-place |
| * |
| * This kernel takes a final int32 accumulator value (the output of matrix multiplication), |
| * and adds to it the offset contribution of matrix A and matrix B in-place. |
| * |
| * @attention The k_offset = a_offset * b_offset * k (where k is the number of matrix A columns) needs to be passed at compile time using -DK_OFFSET (i.e. -DK_OFFSET=1200) |
| * @note In case the offset contribution due to a_offset is required, a_offset needs to be passed at compile time using -DA_OFFSET (i.e. -DA_OFFSET=1) |
| * @note In case the offset contribution due to b_offset is required, b_offset needs to be passed at compile time using -DB_OFFSET (i.e. -DB_OFFSET=6) |
| * @note In case sum_col has batches, -DSUM_COL_HAS_BATCHES must be passed at compile time. Usually if gemmlowp is used to accelerate convolution layer, sum_col will not have batches |
| * @note Vector size should be given as a preprocessor argument using -DVEC_SIZE=size. e.g. -DVEC_SIZE=16 |
| * @note Leftover vector size has to be passed at compile time using -DVEC_SIZE_LEFTOVER. e.g. -DVEC_SIZE_LEFTOVER=3. It is defined as the remainder between the input's first dimension and VEC_SIZE |
| * |
| * The final result is: |
| * |
| * mm_result[i][k] = mm_result[i][k] + |
| * (sum_col[k] * A_OFFSET) + |
| * (sum_row[i] * B_OFFSET) + |
| * (K_OFFSET) |
| * |
| * @param[in] mm_result_ptr Pointer to the source tensor. Supported data type: S32 |
| * @param[in] mm_result_stride_x Stride of the source tensor in X dimension (in bytes) |
| * @param[in] mm_result_step_x mm_result_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] mm_result_stride_y Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] mm_result_step_y mm_result_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] mm_result_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] mm_result_step_z mm_result_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] mm_result_offset_first_element_in_bytes The offset of the first element in the source tensor |
| * @param[in] sum_col_ptr (Optional) Pointer to the source tensor. Supported data type: same as @p mm_result_ptr |
| * @param[in] sum_col_stride_x (Optional) Stride of the source tensor in X dimension (in bytes) |
| * @param[in] sum_col_step_x (Optional) sum_col_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] sum_col_stride_y (Optional) Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] sum_col_step_y (Optional) sum_col_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] sum_col_offset_first_element_in_bytes (Optional) The offset of the first element in the source tensor |
| * @param[in] sum_row_ptr (Optional) Pointer to the source tensor. Supported data type: same as @p mm_result_ptr |
| * @param[in] sum_row_stride_x (Optional) Stride of the source tensor in X dimension (in bytes) |
| * @param[in] sum_row_step_x (Optional) sum_row_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] sum_row_stride_y (Optional) Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] sum_row_step_y (Optional) sum_row_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] sum_row_offset_first_element_in_bytes (Optional) The offset of the first element in the source tensor |
| * @param[in] biases_ptr (Optional) Pointer to the biases tensor. Supported data type: same as @p src_ptr |
| * @param[in] biases_stride_x (Optional) Stride of the biases tensor in X dimension (in bytes) |
| * @param[in] biases_step_x (Optional) biases_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] biases_offset_first_element_in_bytes (Optional) The offset of the first element in the biases tensor |
| */ |
| __kernel void gemmlowp_offset_contribution(TENSOR3D_DECLARATION(mm_result) |
| #if defined(A_OFFSET) |
| , |
| IMAGE_DECLARATION(sum_col) |
| #endif // defined(A_OFFSET) |
| #if defined(B_OFFSET) |
| , |
| IMAGE_DECLARATION(sum_row) |
| #endif // defined(B_OFFSET) |
| #if defined(ADD_BIAS) |
| , |
| VECTOR_DECLARATION(biases) |
| #endif // defined(ADD_BIAS)) |
| ) |
| { |
| const int x = max((int)(get_global_id(0) * VEC_SIZE - (VEC_SIZE - VEC_SIZE_LEFTOVER) % VEC_SIZE), 0); |
| const int y = get_global_id(1); |
| const int z = get_global_id(2); |
| |
| // Compute offset contribution |
| VEC_INT offset_term_s32 = offset_contribution( |
| x, y, z |
| #if defined(A_OFFSET) |
| , |
| sum_col_ptr, |
| sum_col_stride_x, |
| sum_col_step_x, |
| sum_col_stride_y, |
| sum_col_step_y, |
| sum_col_offset_first_element_in_bytes |
| #endif // defined(A_OFFSET) |
| #if defined(B_OFFSET) |
| , |
| sum_row_ptr, |
| sum_row_stride_x, |
| sum_row_step_x, |
| sum_row_stride_y, |
| sum_row_step_y, |
| sum_row_offset_first_element_in_bytes |
| #endif // defined(B_OFFSET) |
| #if defined(ADD_BIAS) |
| , |
| biases_ptr, |
| biases_stride_x, |
| biases_step_x, |
| biases_offset_first_element_in_bytes |
| #endif // defined(ADD_BIAS) |
| ); |
| |
| __global uchar *mm_result_addr = mm_result_ptr + mm_result_offset_first_element_in_bytes + x * sizeof(int) + y * mm_result_stride_y + z * mm_result_stride_z; |
| |
| VEC_INT in_s32_0 = VLOAD(VEC_SIZE)(0, (__global int *)mm_result_addr); |
| |
| // Add the offset terms to GEMM's result |
| in_s32_0 += offset_term_s32; |
| |
| // Store the result with the offset contribution |
| STORE_VECTOR_SELECT(in_s32_, int, mm_result_addr, VEC_SIZE, VEC_SIZE_LEFTOVER, VEC_SIZE_LEFTOVER != 0 && get_global_id(0) == 0) |
| } |
| |
| #if defined(RESULT_OFFSET) && defined(RESULT_MULTIPLIER) && defined(RESULT_SHIFT) && defined(OUTPUT_DATA_TYPE) |
| /* OpenCL kernel used to add the offset contribution after @ref CLGEMMLowpMatrixMultiplyKernel and it quantizes down to uint8. |
| * |
| * This kernel takes a final int32 accumulator value (the output of @CLGEMMLowpMatrixMultiplyKernel), adds to it the offset contribution of matrix A and matrix B and quantizes to uint8 through the output stage. |
| * |
| * |
| * @attention The k_offset = a_offset * b_offset * k (where k is the number of matrix A columns) needs to be passed at compile time using -DK_OFFSET (i.e. -DK_OFFSET=1200) |
| * @note In case the offset contribution due to a_offset is required, a_offset needs to be passed at compile time using -DA_OFFSET (i.e. -DA_OFFSET=1) |
| * @note In case the offset contribution due to b_offset is required, b_offset needs to be passed at compile time using -DB_OFFSET (i.e. -DB_OFFSET=6) |
| * @note In case sum_col has batches, -DSUM_COL_HAS_BATCHES must be passed at compile time. Usually if gemmlowp is used to accelerate convolution layer, sum_col will not have batches |
| * |
| * The result before the output stage is: |
| * |
| * mm_result[i][k] = mm_result[i][k] + |
| * (sum_col[k] * A_OFFSET) + |
| * (sum_row[i] * B_OFFSET) + |
| * (K_OFFSET) |
| * |
| * This result is quantized down to uint8/int8 using the output stage. The output stage computes the following operations: |
| * |
| * -# Add offset terms to final result |
| * -# Multiply each entry of result by result_mult_int |
| * -# Add bias to final result (if -DADD_BIAS is passed at compile time) |
| * -# Shift the int32 accumulator by result_shift |
| * -# Clamp the value between the specified min and max bounds (if -DMIN_BOUND and/or -DMAX_BOUND are passed at compile time) |
| * -# Clamp the resulting int32 values: |
| * - to the [0..255] range and cast to QASYMM8. |
| * - to the [-128..127] range and cast to QASYMM8_SIGNED. |
| * |
| * @attention The offset, scalar scale factor and number of bits to shift right of output tensor must be passed at compile time using -DRESULT_OFFSET, -RESULT_MULT_INT and -DRESULT_SHIFT |
| * |
| * @note In case the addition of int32 biases is required, -DADD_BIAS should be passed at compile time |
| * @note The output datatype should be passed at compile time using -DOUTPUT_DATA_TYPE |
| * @note In case the clamping of the result is required, the min and max bounds can be passed at compile time using -DMIN_BOUND and -DMAX_BOUND. |
| * These values can be used to implement "rectified linear unit" activation functions |
| * @note Vector size should be given as a preprocessor argument using -DVEC_SIZE=size. e.g. -DVEC_SIZE=16 |
| * @note Leftover vector size has to be passed at compile time using -DVEC_SIZE_LEFTOVER. e.g. -DVEC_SIZE_LEFTOVER=3. It is defined as the remainder between the input's first dimension and VEC_SIZE |
| * |
| * @param[in] mm_result_ptr Pointer to the source tensor. Supported data type: S32 |
| * @param[in] mm_result_stride_x Stride of the source tensor in X dimension (in bytes) |
| * @param[in] mm_result_step_x mm_result_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] mm_result_stride_y Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] mm_result_step_y mm_result_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] mm_result_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] mm_result_step_z mm_result_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] mm_result_offset_first_element_in_bytes The offset of the first element in the source tensor |
| * @param[in] sum_col_ptr (Optional) Pointer to the source tensor. Supported data type: same as @p mm_result_ptr |
| * @param[in] sum_col_stride_x (Optional) Stride of the source tensor in X dimension (in bytes) |
| * @param[in] sum_col_step_x (Optional) sum_col_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] sum_col_stride_y (Optional) Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] sum_col_step_y (Optional) sum_col_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] sum_col_offset_first_element_in_bytes (Optional) The offset of the first element in the source tensor |
| * @param[in] sum_row_ptr (Optional) Pointer to the source tensor. Supported data type: same as @p mm_result_ptr |
| * @param[in] sum_row_stride_x (Optional) Stride of the source tensor in X dimension (in bytes) |
| * @param[in] sum_row_step_x (Optional) sum_row_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] sum_row_stride_y (Optional) Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] sum_row_step_y (Optional) sum_row_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] sum_row_offset_first_element_in_bytes (Optional) The offset of the first element in the source tensor |
| * @param[in] biases_ptr (Optional) Pointer to the biases tensor. Supported data type: same as @p src_ptr |
| * @param[in] biases_stride_x (Optional) Stride of the biases tensor in X dimension (in bytes) |
| * @param[in] biases_step_x (Optional) biases_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] biases_offset_first_element_in_bytes (Optional) The offset of the first element in the biases tensor |
| * @param[out] dst_ptr Pointer to the destination tensor Supported data type: QASYMM8/QASYMM8_SIGNED |
| * @param[in] dst_stride_x Stride of the destination tensor in X dimension (in bytes) |
| * @param[in] dst_step_x dst_gx_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] dst_stride_y Stride of the destination tensor in Y dimension (in bytes) |
| * @param[in] dst_step_y dst_gx_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] dst_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] dst_step_z src_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] dst_offset_first_element_in_bytes The offset of the first element in the destination tensor |
| * @param[in] result_multipliers_ptr (Optional) Pointer to the output multipliers vector for per-channel quantization. Supported data types: S32 |
| * @param[in] result_multipliers_stride_x (Optional) Stride of the output multipliers vector in X dimension (in bytes) |
| * @param[in] result_multipliers_step_x (Optional) output_multipliers_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] result_multipliers_offset_first_element_in_bytes (Optional) The offset of the first element in the output multipliers vector |
| * @param[in] result_shifts_ptr (Optional) Pointer to the output shifts vector for per-channel quantization. Supported data types: S32 |
| * @param[in] result_shifts_stride_x (Optional) Stride of the output shifts vector in X dimension (in bytes) |
| * @param[in] result_shifts_step_x (Optional) output_shifts_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] result_shifts_offset_first_element_in_bytes (Optional) The offset of the first element in the output shifts vector |
| */ |
| __kernel void gemmlowp_offset_contribution_quantize_down(TENSOR3D_DECLARATION(mm_result) |
| #if defined(A_OFFSET) |
| , |
| IMAGE_DECLARATION(sum_col) |
| #endif // defined(A_OFFSET) |
| #if defined(B_OFFSET) |
| , |
| IMAGE_DECLARATION(sum_row) |
| #endif // defined(B_OFFSET) |
| , |
| #if defined(ADD_BIAS) |
| VECTOR_DECLARATION(biases), |
| #endif // defined(ADD_BIAS) |
| TENSOR3D_DECLARATION(dst) |
| #if defined(PER_CHANNEL_QUANTIZATION) |
| , |
| VECTOR_DECLARATION(result_multipliers), |
| VECTOR_DECLARATION(result_shifts) |
| #endif // defined(PER_CHANNEL_QUANTIZATION) |
| ) |
| { |
| const int x = max((int)(get_global_id(0) * VEC_SIZE - (VEC_SIZE - VEC_SIZE_LEFTOVER) % VEC_SIZE), 0); |
| const int y = get_global_id(1); |
| const int z = get_global_id(2); |
| |
| __global uchar *dst_addr = dst_ptr + dst_offset_first_element_in_bytes + x + y * dst_stride_y + z * dst_stride_z; |
| |
| // Compute offset contribution |
| VEC_INT offset_term_s32 = offset_contribution( |
| x, y, z |
| #if defined(A_OFFSET) |
| , |
| sum_col_ptr, |
| sum_col_stride_x, |
| sum_col_step_x, |
| sum_col_stride_y, |
| sum_col_step_y, |
| sum_col_offset_first_element_in_bytes |
| #endif // defined(A_OFFSET) |
| #if defined(B_OFFSET) |
| , |
| sum_row_ptr, |
| sum_row_stride_x, |
| sum_row_step_x, |
| sum_row_stride_y, |
| sum_row_step_y, |
| sum_row_offset_first_element_in_bytes |
| #endif // defined(B_OFFSET) |
| #if defined(ADD_BIAS) |
| , |
| biases_ptr, |
| biases_stride_x, |
| biases_step_x, |
| biases_offset_first_element_in_bytes |
| #endif // defined(ADD_BIAS) |
| ); |
| |
| __global uchar *mm_result_addr = mm_result_ptr + mm_result_offset_first_element_in_bytes + x * sizeof(int) + y * mm_result_stride_y + z * mm_result_stride_z; |
| |
| VEC_INT in_s32 = VLOAD(VEC_SIZE)(0, (__global int *)mm_result_addr); |
| |
| // Add the offset terms to GEMM's result |
| in_s32 += offset_term_s32; |
| |
| // -------------- OUTPUT STAGE |
| |
| // Add the offset terms to GEMM's result |
| in_s32 += (VEC_INT)RESULT_OFFSET; |
| |
| // Multiply by result_mult_int and shift |
| #if defined(PER_CHANNEL_QUANTIZATION) |
| __global uchar *result_multipliers_addr = result_multipliers_ptr + result_multipliers_offset_first_element_in_bytes + x * sizeof(int); |
| __global uchar *result_shifts_addr = result_shifts_ptr + result_shifts_offset_first_element_in_bytes + x * sizeof(int); |
| VEC_INT result_multipliers_values = VLOAD(VEC_SIZE)(0, (__global int *)result_multipliers_addr); |
| VEC_INT result_shifts_values = VLOAD(VEC_SIZE)(0, (__global int *)result_shifts_addr); |
| |
| in_s32 *= result_multipliers_values; |
| in_s32 >>= result_shifts_values; |
| #else // defined(PER_CHANNEL_QUANTIZATION) |
| in_s32 *= RESULT_MULTIPLIER; |
| |
| in_s32 >>= RESULT_SHIFT; |
| #endif // defined(PER_CHANNEL_QUANTIZATION) |
| |
| VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE) |
| res0 = CONVERT_SAT(in_s32, VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE)); |
| |
| #if defined(MIN_BOUND) |
| res0 = max(res0, (VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE))MIN_BOUND); |
| #endif // defined(MIN_BOUND) |
| #if defined(MAX_BOUND) |
| res0 = min(res0, (VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE))MAX_BOUND); |
| #endif // defined(MAX_BOUND) |
| |
| // Store the result |
| STORE_VECTOR_SELECT(res, OUTPUT_DATA_TYPE, dst_addr, VEC_SIZE, VEC_SIZE_LEFTOVER, VEC_SIZE_LEFTOVER != 0 && get_global_id(0) == 0) |
| } |
| |
| /* OpenCL kernel used to add the offset contribution after matrix multiplication and it quantizes down to uint8. |
| * |
| * This kernel takes a final int32 accumulator value (the output of matrix multiplication), adds to it the offset contribution of matrix A and matrix B and quantizes to uint8 through the output stage. |
| * |
| * |
| * @attention The k_offset = a_offset * b_offset * k (where k is the number of matrix A columns) needs to be passed at compile time using -DK_OFFSET (i.e. -DK_OFFSET=1200) |
| * @note In case the offset contribution due to a_offset is required, a_offset needs to be passed at compile time using -DA_OFFSET (i.e. -DA_OFFSET=1) |
| * @note In case the offset contribution due to b_offset is required, b_offset needs to be passed at compile time using -DB_OFFSET (i.e. -DB_OFFSET=6) |
| * @note In case sum_col has batches, -DSUM_COL_HAS_BATCHES must be passed at compile time. Usually if gemmlowp is used to accelerate convolution layer, sum_col will not have batches |
| * |
| * The result before the output stage is: |
| * |
| * mm_result[i][k] = mm_result[i][k] + |
| * (sum_col[k] * A_OFFSET) + |
| * (sum_row[i] * B_OFFSET) + |
| * (K_OFFSET) |
| * |
| * This result is quantized down to uint8/int8 using the output stage. The output stage computes the following operations: |
| * |
| * -# Compute fixed point multiplication between each entry of input by result_fixedpoint_multiplier |
| * -# Add bias to final result if bias tensor is not a nullptr |
| * -# Round to nearest division by a power-of-two using result_shift |
| * -# Add offset to each result |
| * -# Clamp the value between the specified min and max bounds |
| * -# Clamp the resulting int32 values: |
| * - to the [0..255] range and cast to QASYMM8. |
| * - to the [-128..127] range and cast to QASYMM8_SIGNED. |
| * |
| * @attention The offset, scalar scale factor and number of bits to shift right of output tensor must be passed at compile time using -DRESULT_OFFSET, -RESULT_MULT_INT and -DRESULT_SHIFT |
| * |
| * @note In case the addition of int32 biases is required, -DADD_BIAS should be passed at compile time |
| * @note The output datatype should be passed at compile time using -DOUTPUT_DATA_TYPE |
| * @note In case the clamping of the result is required, the min and max bounds can be passed at compile time using -DMIN_BOUND and -DMAX_BOUND. |
| * These values can be used to implement "rectified linear unit" activation functions |
| * @note Vector size should be given as a preprocessor argument using -DVEC_SIZE=size. e.g. -DVEC_SIZE=16 |
| * @note Leftover vector size has to be passed at compile time using -DVEC_SIZE_LEFTOVER. e.g. -DVEC_SIZE_LEFTOVER=3. It is defined as the remainder between the input's first dimension and VEC_SIZE |
| * |
| * @param[in] mm_result_ptr Pointer to the source tensor. Supported data type: S32 |
| * @param[in] mm_result_stride_x Stride of the source tensor in X dimension (in bytes) |
| * @param[in] mm_result_step_x mm_result_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] mm_result_stride_y Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] mm_result_step_y mm_result_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] mm_result_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] mm_result_step_z mm_result_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] mm_result_offset_first_element_in_bytes The offset of the first element in the source tensor |
| * @param[in] sum_col_ptr (Optional) Pointer to the source tensor. Supported data type: same as @p mm_result_ptr |
| * @param[in] sum_col_stride_x (Optional) Stride of the source tensor in X dimension (in bytes) |
| * @param[in] sum_col_step_x (Optional) sum_col_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] sum_col_stride_y (Optional) Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] sum_col_step_y (Optional) sum_col_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] sum_col_offset_first_element_in_bytes (Optional) The offset of the first element in the source tensor |
| * @param[in] sum_row_ptr (Optional) Pointer to the source tensor. Supported data type: same as @p mm_result_ptr |
| * @param[in] sum_row_stride_x (Optional) Stride of the source tensor in X dimension (in bytes) |
| * @param[in] sum_row_step_x (Optional) sum_row_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] sum_row_stride_y (Optional) Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] sum_row_step_y (Optional) sum_row_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] sum_row_offset_first_element_in_bytes (Optional) The offset of the first element in the source tensor |
| * @param[in] biases_ptr (Optional) Pointer to the biases tensor. Supported data type: same as @p src_ptr |
| * @param[in] biases_stride_x (Optional) Stride of the biases tensor in X dimension (in bytes) |
| * @param[in] biases_step_x (Optional) biases_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] biases_offset_first_element_in_bytes (Optional) The offset of the first element in the biases tensor |
| * @param[out] dst_ptr Pointer to the destination tensor Supported data type: QASYMM8/QASYMM8_SIGNED |
| * @param[in] dst_stride_x Stride of the destination tensor in X dimension (in bytes) |
| * @param[in] dst_step_x dst_gx_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] dst_stride_y Stride of the destination tensor in Y dimension (in bytes) |
| * @param[in] dst_step_y dst_gx_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] dst_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] dst_step_z src_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] dst_offset_first_element_in_bytes The offset of the first element in the destination tensor |
| * @param[in] result_multipliers_ptr (Optional) Pointer to the output multipliers vector for per-channel quantization. Supported data types: S32 |
| * @param[in] result_multipliers_stride_x (Optional) Stride of the output multipliers vector in X dimension (in bytes) |
| * @param[in] result_multipliers_step_x (Optional) output_multipliers_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] result_multipliers_offset_first_element_in_bytes (Optional) The offset of the first element in the output multipliers vector |
| * @param[in] result_shifts_ptr (Optional) Pointer to the output shifts vector for per-channel quantization. Supported data types: S32 |
| * @param[in] result_shifts_stride_x (Optional) Stride of the output shifts vector in X dimension (in bytes) |
| * @param[in] result_shifts_step_x (Optional) output_shifts_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] result_shifts_offset_first_element_in_bytes (Optional) The offset of the first element in the output shifts vector |
| */ |
| __kernel void gemmlowp_offset_contribution_quantize_down_fixedpoint(TENSOR3D_DECLARATION(mm_result) |
| #if defined(A_OFFSET) |
| , |
| IMAGE_DECLARATION(sum_col) |
| #endif // defined(A_OFFSET) |
| #if defined(B_OFFSET) |
| , |
| IMAGE_DECLARATION(sum_row) |
| #endif // defined(B_OFFSET) |
| , |
| #if defined(ADD_BIAS) |
| VECTOR_DECLARATION(biases), |
| #endif // defined(ADD_BIAS) |
| TENSOR3D_DECLARATION(dst) |
| #if defined(PER_CHANNEL_QUANTIZATION) |
| , |
| VECTOR_DECLARATION(result_multipliers), |
| VECTOR_DECLARATION(result_shifts) |
| #endif // defined(PER_CHANNEL_QUANTIZATION) |
| ) |
| { |
| const int x = max((int)(get_global_id(0) * VEC_SIZE - (VEC_SIZE - VEC_SIZE_LEFTOVER) % VEC_SIZE), 0); |
| const int y = get_global_id(1); |
| const int z = get_global_id(2); |
| |
| // Compute offset contribution |
| VEC_INT offset_term_s32 = offset_contribution( |
| x, y, z |
| #if defined(A_OFFSET) |
| , |
| sum_col_ptr, |
| sum_col_stride_x, |
| sum_col_step_x, |
| sum_col_stride_y, |
| sum_col_step_y, |
| sum_col_offset_first_element_in_bytes |
| #endif // defined(A_OFFSET) |
| #if defined(B_OFFSET) |
| , |
| sum_row_ptr, |
| sum_row_stride_x, |
| sum_row_step_x, |
| sum_row_stride_y, |
| sum_row_step_y, |
| sum_row_offset_first_element_in_bytes |
| #endif // defined(B_OFFSET) |
| #if defined(ADD_BIAS) |
| , |
| biases_ptr, |
| biases_stride_x, |
| biases_step_x, |
| biases_offset_first_element_in_bytes |
| #endif // defined(ADD_BIAS) |
| ); |
| |
| __global uchar *mm_result_addr = mm_result_ptr + mm_result_offset_first_element_in_bytes + x * sizeof(int) + y * mm_result_stride_y + z * mm_result_stride_z; |
| |
| __global uchar *dst_addr = dst_ptr + dst_offset_first_element_in_bytes + x + y * dst_stride_y + z * dst_stride_z; |
| |
| VEC_INT in_s32 = VLOAD(VEC_SIZE)(0, (__global int *)mm_result_addr); |
| |
| // Add the offset terms to GEMM's result |
| in_s32 += offset_term_s32; |
| |
| // -------------- OUTPUT STAGE |
| |
| // Multiply by result_mult_int and shift |
| #if defined(PER_CHANNEL_QUANTIZATION) |
| __global uchar *result_multipliers_addr = result_multipliers_ptr + result_multipliers_offset_first_element_in_bytes + x * sizeof(int); |
| __global uchar *result_shifts_addr = result_shifts_ptr + result_shifts_offset_first_element_in_bytes + x * sizeof(int); |
| VEC_INT result_multipliers_values = VLOAD(VEC_SIZE)(0, (__global int *)result_multipliers_addr); |
| VEC_INT result_shifts_values = VLOAD(VEC_SIZE)(0, (__global int *)result_shifts_addr); |
| |
| VEC_INT in_s32_shift_lt0 = ASYMM_MULT_BY_QUANT_MULTIPLIER_GREATER_THAN_ONE(in_s32, result_multipliers_values, result_shifts_values, VEC_SIZE); |
| VEC_INT in_s32_shift_gt0 = ASYMM_MULT_BY_QUANT_MULTIPLIER_LESS_THAN_ONE(in_s32, result_multipliers_values, result_shifts_values, VEC_SIZE); |
| in_s32 = select(in_s32_shift_lt0, in_s32_shift_gt0, result_shifts_values >= 0); |
| #else // defined(PER_CHANNEL_QUANTIZATION) |
| |
| #if RESULT_SHIFT < 0 |
| in_s32 = ASYMM_MULT_BY_QUANT_MULTIPLIER_GREATER_THAN_ONE(in_s32, RESULT_MULTIPLIER, RESULT_SHIFT, VEC_SIZE); |
| #else // RESULT_SHIFT >= 0 |
| in_s32 = ASYMM_MULT_BY_QUANT_MULTIPLIER_LESS_THAN_ONE(in_s32, RESULT_MULTIPLIER, RESULT_SHIFT, VEC_SIZE); |
| #endif // RESULT_SHIFT < 0 |
| |
| #endif // defined(PER_CHANNEL_QUANTIZATION) |
| |
| // Add the offset terms to GEMM's result |
| in_s32 += (VEC_INT)RESULT_OFFSET; |
| |
| VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE) |
| res0 = CONVERT_SAT(in_s32, VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE)); |
| |
| #if defined(MIN_BOUND) |
| res0 = max(res0, (VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE))MIN_BOUND); |
| #endif // defined(MIN_BOUND) |
| #if defined(MAX_BOUND) |
| res0 = min(res0, (VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE))MAX_BOUND); |
| #endif // defined(MAX_BOUND) |
| |
| // Store the result |
| STORE_VECTOR_SELECT(res, OUTPUT_DATA_TYPE, dst_addr, VEC_SIZE, VEC_SIZE_LEFTOVER, VEC_SIZE_LEFTOVER != 0 && get_global_id(0) == 0) |
| } |
| #endif // defined(RESULT_OFFSET) && defined(RESULT_MULTIPLIER) && defined(RESULT_SHIFT) && defined(OUTPUT_DATA_TYPE) |
| |
| #undef VEC_INT |
| |
| #endif // defined(K_OFFSET) && defined(VEC_SIZE) && defined(VEC_SIZE_LEFTOVER) |
| |
| #if defined(RESULT_OFFSET) && defined(RESULT_MULT_INT) && defined(RESULT_SHIFT) |
| /** This OpenCL kernel is used to quantize down the int32 accumulator values of GEMMLowp to QASYMM8/QASYMM8_SIGNED |
| * |
| * This kernel takes a final int32 accumulator value and processes it to obtain the final QASYMM8/QASYMM8_SIGNED value. |
| * The following computations will be performed by the kernel: |
| * |
| * -# Add offset terms to final result |
| * -# Multiply each entry of result by result_mult_int |
| * -# Add bias to final result (if -DADD_BIAS is passed at compile time) |
| * -# Shift the int32 accumulator by result_shift |
| * -# Clamp the value between the specified min and max bounds (if -DMIN_BOUND and/or -DMAX_BOUND are passed at compile time) |
| * -# Clamp the resulting int32 values: |
| * -# - to the [0..255] range and cast to QASYMM8. |
| * -# - to the [-128..127] range and cast to QASYMM8_SIGNED. |
| * |
| * @attention The offset, scalar scale factor and number of bits to shift right of output tensor must be passed at compile time using -DRESULT_OFFSET, -RESULT_MULT_INT and -DRESULT_SHIFT |
| * |
| * @note In case the addition of int32 biases is required, -DADD_BIAS should be passed at compile time |
| * @note The output datatype should be passed at compile time using -DOUTPUT_DATA_TYPE |
| * @note In case the clamping of the result is required, the min and max bounds can be passed at compile time using -DMIN_BOUND and -DMAX_BOUND. |
| * These values can be used to implement "rectified linear unit" activation functions |
| * @note Leftover vector size has to be passed at compile time using -DVEC_SIZE_LEFTOVER. e.g. -DVEC_SIZE_LEFTOVER=3. It is defined as the remainder between the input's first dimension and VEC_SIZE |
| * |
| * @param[in] src_ptr Pointer to the source tensor. Supported data type: S32 |
| * @param[in] src_stride_x Stride of the source tensor in X dimension (in bytes) |
| * @param[in] src_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] src_stride_y Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] src_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] src_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] src_step_z src_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] src_offset_first_element_in_bytes The offset of the first element in the source tensor |
| * @param[in] biases_ptr (Optional) Pointer to the biases tensor. Supported data type: same as @p src_ptr |
| * @param[in] biases_stride_x (Optional) Stride of the biases tensor in X dimension (in bytes) |
| * @param[in] biases_step_x (Optional) biases_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] biases_offset_first_element_in_bytes (Optional) The offset of the first element in the biases tensor |
| * @param[out] dst_ptr Pointer to the destination tensor Supported data type: QASYMM8/QASYMM8_SIGNED |
| * @param[in] dst_stride_x Stride of the destination tensor in X dimension (in bytes) |
| * @param[in] dst_step_x dst_gx_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] dst_stride_y Stride of the destination tensor in Y dimension (in bytes) |
| * @param[in] dst_step_y dst_gx_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] dst_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] dst_step_z src_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] dst_offset_first_element_in_bytes The offset of the first element in the destination tensor |
| */ |
| __kernel void gemmlowp_output_stage_quantize_down(TENSOR3D_DECLARATION(src), |
| #if defined(ADD_BIAS) |
| VECTOR_DECLARATION(biases), |
| #endif // defined(ADD_BIAS) |
| TENSOR3D_DECLARATION(dst)) |
| { |
| // Compute source and destination addresses |
| int x = max((int)(get_global_id(0) * VEC_SIZE - (VEC_SIZE - VEC_SIZE_LEFTOVER) % VEC_SIZE), 0); |
| int y = get_global_id(1); |
| int z = get_global_id(2); |
| |
| __global uchar *src_addr = src_ptr + src_offset_first_element_in_bytes + x * sizeof(int) + y * src_stride_y + z * src_stride_z; |
| |
| __global uchar *dst_addr = dst_ptr + dst_offset_first_element_in_bytes + x + y * dst_stride_y + z * dst_stride_z; |
| |
| VEC_DATA_TYPE(int, VEC_SIZE) |
| input_values = VLOAD(VEC_SIZE)(0, (__global int *)src_addr); |
| |
| #if defined(ADD_BIAS) |
| // Add bias |
| __global uchar *bias_addr = biases_ptr + biases_offset_first_element_in_bytes + x * sizeof(int); |
| |
| VEC_DATA_TYPE(int, VEC_SIZE) |
| biases_values = VLOAD(VEC_SIZE)(0, (__global int *)bias_addr); |
| input_values += biases_values; |
| #endif // defined(ADD_BIAS) |
| |
| // Add the offset terms to GEMM's result |
| input_values += (VEC_DATA_TYPE(int, VEC_SIZE))RESULT_OFFSET; |
| |
| // Multiply by result_mult_int and shift |
| input_values *= RESULT_MULT_INT; |
| |
| #if RESULT_SHIFT < 0 |
| input_values >>= -RESULT_SHIFT; |
| #else // RESULT_SHIFT >= 0 |
| input_values >>= RESULT_SHIFT; |
| #endif // RESULT_SHIFT < 0 |
| |
| VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE) |
| res0 = CONVERT_SAT(input_values, VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE)); |
| |
| #if defined(MIN_BOUND) |
| res0 = max(res0, (VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE))MIN_BOUND); |
| #endif // defined(MIN_BOUND) |
| #if defined(MAX_BOUND) |
| res0 = min(res0, (VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE))MAX_BOUND); |
| #endif // defined(MAX_BOUND) |
| |
| // Store the result |
| STORE_VECTOR_SELECT(res, OUTPUT_DATA_TYPE, dst_addr, VEC_SIZE, VEC_SIZE_LEFTOVER, VEC_SIZE_LEFTOVER != 0 && get_global_id(0) == 0) |
| } |
| #endif // defined(RESULT_OFFSET) && defined(RESULT_MULT_INT) && defined(RESULT_SHIFT) |
| |
| #if defined(RESULT_OFFSET_AFTER_SHIFT) && defined(RESULT_FIXEDPOINT_MULTIPLIER) && defined(RESULT_SHIFT) |
| /** This OpenCL kernel is used to quantize down the int32 accumulator values of GEMMLowp to QASYMM8/QASYMM8_SIGNED |
| * |
| * This kernel takes a final int32 accumulator value (the output of matrix multiplication), and processes it to obtain the final QASYMM8/QASYMM8_SIGNED value. |
| * The following computations will be performed by the kernel: |
| * |
| * -# Compute fixed point multiplication between each entry of input by result_fixedpoint_multiplier |
| * -# Add bias to final result if bias tensor is not a nullptr |
| * -# Round to nearest division by a power-of-two using result_shift |
| * -# Add offset to each result |
| * -# Clamp the value between the specified min and max bounds |
| * -# Clamp the resulting int32 values: |
| * - to the [0..255] range and cast to QASYMM8. |
| * - to the [-128..127] range and cast to QASYMM8_SIGNED. |
| * |
| * @attention The offset, scalar scale factor and number of bits to shift right of output tensor must be passed at compile time using -DRESULT_OFFSET_AFTER_SHIFT, -DRESULT_FIXEDPOINT_MULTIPLIER and -DRESULT_SHIFT |
| * |
| * @note In case the addition of int32 biases is required, -DADD_BIAS should be passed at compile time |
| * @note The output datatype should be passed at compile time using -DOUTPUT_DATA_TYPE |
| * @note In case the clamping of the result is required, the min and max bounds can be passed at compile time using -DMIN_BOUND and -DMAX_BOUND. |
| * These values can be used to implement "rectified linear unit" activation functions |
| * @note Vector size should be given as a preprocessor argument using -DVEC_SIZE=size. e.g. -DVEC_SIZE=16 |
| * @note Leftover vector size has to be passed at compile time using -DVEC_SIZE_LEFTOVER. e.g. -DVEC_SIZE_LEFTOVER=3. It is defined as the remainder between the input's first dimension and VEC_SIZE |
| * |
| * @param[in] src_ptr Pointer to the source tensor. Supported data type: S32 |
| * @param[in] src_stride_x Stride of the source tensor in X dimension (in bytes) |
| * @param[in] src_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] src_stride_y Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] src_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] src_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] src_step_z src_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] src_offset_first_element_in_bytes The offset of the first element in the source tensor |
| * @param[in] biases_ptr (Optional) Pointer to the biases tensor. Supported data type: same as @p src_ptr |
| * @param[in] biases_stride_x (Optional) Stride of the biases tensor in X dimension (in bytes) |
| * @param[in] biases_step_x (Optional) biases_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] biases_offset_first_element_in_bytes (Optional) The offset of the first element in the biases tensor |
| * @param[out] dst_ptr Pointer to the destination tensor Supported data type: QASYMM8/QASYMM8_SIGNED |
| * @param[in] dst_stride_x Stride of the destination tensor in X dimension (in bytes) |
| * @param[in] dst_step_x dst_gx_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] dst_stride_y Stride of the destination tensor in Y dimension (in bytes) |
| * @param[in] dst_step_y dst_gx_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] dst_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] dst_step_z src_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] dst_offset_first_element_in_bytes The offset of the first element in the destination tensor |
| */ |
| __kernel void gemmlowp_output_stage_quantize_down_fixedpoint(TENSOR3D_DECLARATION(src), |
| #if defined(ADD_BIAS) |
| VECTOR_DECLARATION(biases), |
| #endif // defined(ADD_BIAS) |
| TENSOR3D_DECLARATION(dst)) |
| { |
| // Compute source and destination addresses |
| int x = max((int)(get_global_id(0) * VEC_SIZE - (VEC_SIZE - VEC_SIZE_LEFTOVER) % VEC_SIZE), 0); |
| int y = get_global_id(1); |
| int z = get_global_id(2); |
| |
| __global uchar *src_addr = src_ptr + src_offset_first_element_in_bytes + x * sizeof(int) + y * src_stride_y + z * src_stride_z; |
| |
| __global uchar *dst_addr = dst_ptr + dst_offset_first_element_in_bytes + x + y * dst_stride_y + z * dst_stride_z; |
| |
| VEC_DATA_TYPE(int, VEC_SIZE) |
| input_values = VLOAD(VEC_SIZE)(0, (__global int *)src_addr); |
| |
| #if defined(ADD_BIAS) |
| // Add bias |
| __global uchar *bias_addr = biases_ptr + biases_offset_first_element_in_bytes + x * sizeof(int); |
| |
| VEC_DATA_TYPE(int, VEC_SIZE) |
| biases_values = VLOAD(VEC_SIZE)(0, (__global int *)bias_addr); |
| input_values += biases_values; |
| #endif // defined(ADD_BIAS) |
| |
| // Multiply by result_mult_int and shift |
| #if RESULT_SHIFT < 0 |
| input_values = ASYMM_MULT_BY_QUANT_MULTIPLIER_GREATER_THAN_ONE(input_values, RESULT_FIXEDPOINT_MULTIPLIER, RESULT_SHIFT, VEC_SIZE); |
| #else // RESULT_SHIFT >= 0 |
| input_values = ASYMM_MULT_BY_QUANT_MULTIPLIER_LESS_THAN_ONE(input_values, RESULT_FIXEDPOINT_MULTIPLIER, RESULT_SHIFT, VEC_SIZE); |
| #endif // RESULT_SHIFT < 0 |
| |
| // Add the offset terms to GEMM's result |
| input_values += (VEC_DATA_TYPE(int, VEC_SIZE))RESULT_OFFSET_AFTER_SHIFT; |
| |
| VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE) |
| res0 = CONVERT_SAT(input_values, VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE)); |
| |
| #if defined(MIN_BOUND) |
| res0 = max(res0, (VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE))MIN_BOUND); |
| #endif // defined(MIN_BOUND) |
| #if defined(MAX_BOUND) |
| res0 = min(res0, (VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE))MAX_BOUND); |
| #endif // defined(MAX_BOUND) |
| |
| // Store the result |
| STORE_VECTOR_SELECT(res, OUTPUT_DATA_TYPE, dst_addr, VEC_SIZE, VEC_SIZE_LEFTOVER, VEC_SIZE_LEFTOVER != 0 && get_global_id(0) == 0) |
| } |
| #endif // defined(RESULT_OFFSET_AFTER_SHIFT) && defined(RESULT_FIXEDPOINT_MULTIPLIER) && defined(RESULT_SHIFT) |
| |
| #if defined(RESULT_FIXEDPOINT_MULTIPLIER) && defined(RESULT_SHIFT) |
| |
| /** This OpenCL kernel is used to quantize down the int32 accumulator values of GEMMLowp to QSYMM16 |
| * |
| * This kernel takes a final int32 accumulator value (the output of matrix multiplication), and processes it to obtain the final QSYMM16 value. |
| * The following computations will be performed by the kernel: |
| * |
| * -# Compute fixed point multiplication between each entry of input by result_fixedpoint_multiplier |
| * -# Add bias to final result if bias tensor is not a nullptr |
| * -# Round to nearest division by a power-of-two using result_shift |
| * -# Add offset to each result |
| * -# Clamp the value between the specified min and max bounds |
| * -# Clamp the resulting int32 values to the [-32768..32767] range and cast to QSYMM16. |
| * |
| * @attention The offset, scalar scale factor and number of bits to shift right of output tensor must be passed at compile time using -DRESULT_FIXEDPOINT_MULTIPLIER and -DRESULT_SHIFT |
| * |
| * @note In case the addition of int32 biases is required, -DADD_BIAS should be passed at compile time |
| * @note In case the clamping of the result is required, the min and max bounds can be passed at compile time using -DMIN_BOUND and -DMAX_BOUND. |
| * These values can be used to implement "rectified linear unit" activation functions |
| * @note Vector size should be given as a preprocessor argument using -DVEC_SIZE=size. e.g. -DVEC_SIZE=16 |
| * @note Leftover vector size has to be passed at compile time using -DVEC_SIZE_LEFTOVER. e.g. -DVEC_SIZE_LEFTOVER=3. It is defined as the remainder between the input's first dimension and VEC_SIZE |
| * |
| * @param[in] src_ptr Pointer to the source tensor. Supported data type: S32 |
| * @param[in] src_stride_x Stride of the source tensor in X dimension (in bytes) |
| * @param[in] src_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] src_stride_y Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] src_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] src_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] src_step_z src_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] src_offset_first_element_in_bytes The offset of the first element in the source tensor |
| * @param[in] biases_ptr (Optional) Pointer to the biases tensor. Supported data type: same as @p src_ptr |
| * @param[in] biases_stride_x (Optional) Stride of the biases tensor in X dimension (in bytes) |
| * @param[in] biases_step_x (Optional) biases_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] biases_offset_first_element_in_bytes (Optional) The offset of the first element in the biases tensor |
| * @param[out] dst_ptr Pointer to the destination tensor Supported data type: QSYMM16 |
| * @param[in] dst_stride_x Stride of the destination tensor in X dimension (in bytes) |
| * @param[in] dst_step_x dst_gx_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] dst_stride_y Stride of the destination tensor in Y dimension (in bytes) |
| * @param[in] dst_step_y dst_gx_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] dst_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] dst_step_z src_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] dst_offset_first_element_in_bytes The offset of the first element in the destination tensor |
| */ |
| __kernel void gemmlowp_output_stage_quantize_down_fixedpoint_qsymm16(TENSOR3D_DECLARATION(src), |
| #if defined(ADD_BIAS) |
| VECTOR_DECLARATION(biases), |
| #endif // defined(ADD_BIAS) |
| TENSOR3D_DECLARATION(dst)) |
| { |
| // Compute source and destination addresses |
| int x = max((int)(get_global_id(0) * VEC_SIZE - (VEC_SIZE - VEC_SIZE_LEFTOVER) % VEC_SIZE), 0); |
| int y = get_global_id(1); |
| int z = get_global_id(2); |
| |
| __global uchar *src_addr = src_ptr + src_offset_first_element_in_bytes + x * sizeof(int) + y * src_stride_y + z * src_stride_z; |
| |
| __global uchar *dst_addr = dst_ptr + dst_offset_first_element_in_bytes + x * sizeof(short) + y * dst_stride_y + z * dst_stride_z; |
| |
| VEC_DATA_TYPE(int, VEC_SIZE) |
| input_values = VLOAD(VEC_SIZE)(0, (__global int *)src_addr); |
| |
| #if defined(ADD_BIAS) |
| // Add bias |
| __global uchar *bias_addr = biases_ptr + biases_offset_first_element_in_bytes + x * sizeof(int); |
| |
| VEC_DATA_TYPE(int, VEC_SIZE) |
| biases_values = VLOAD(VEC_SIZE)(0, (__global int *)bias_addr); |
| input_values += biases_values; |
| #endif // defined(ADD_BIAS) |
| |
| // Multiply by result_mult_int and shift |
| #if RESULT_SHIFT < 0 |
| input_values = ASYMM_MULT_BY_QUANT_MULTIPLIER_GREATER_THAN_ONE(input_values, RESULT_FIXEDPOINT_MULTIPLIER, RESULT_SHIFT, VEC_SIZE); |
| #else // RESULT_SHIFT >= 0 |
| input_values = ASYMM_MULT_BY_QUANT_MULTIPLIER_LESS_THAN_ONE(input_values, RESULT_FIXEDPOINT_MULTIPLIER, RESULT_SHIFT, VEC_SIZE); |
| #endif // RESULT_SHIFT < 0 |
| |
| VEC_DATA_TYPE(short, VEC_SIZE) |
| res0 = CONVERT_SAT(input_values, VEC_DATA_TYPE(short, VEC_SIZE)); |
| |
| #if defined(MIN_BOUND) |
| res0 = max(res0, (VEC_DATA_TYPE(short, VEC_SIZE))MIN_BOUND); |
| #endif // defined(MIN_BOUND) |
| #if defined(MAX_BOUND) |
| res0 = min(res0, (VEC_DATA_TYPE(short, VEC_SIZE))MAX_BOUND); |
| #endif // defined(MAX_BOUND) |
| |
| // Store the result |
| STORE_VECTOR_SELECT(res, short, dst_addr, VEC_SIZE, VEC_SIZE_LEFTOVER, VEC_SIZE_LEFTOVER != 0 && get_global_id(0) == 0) |
| } |
| #endif // defined(RESULT_FIXEDPOINT_MULTIPLIER) && defined(RESULT_SHIFT) |
| |
| #if defined(REAL_MULTIPLIER) && defined(OUTPUT_OFFSET) |
| /** This OpenCL kernel is used to quantize down the int32 accumulator values of GEMMLowp to QASYMM8/QASYMM8_SIGNED |
| * |
| * This kernel takes a final int32 accumulator value (the output of matrix multiplication), and processes it to obtain the final QASYMM8/QASYMM8_SIGNED value. |
| * The following computations will be performed by the kernel: |
| * |
| * -# Compute fixed point multiplication between each entry of input by result_fixedpoint_multiplier |
| * -# Add bias to final result if bias tensor is not a nullptr |
| * -# Requantize |
| * -# Add offset to each result |
| * -# Clamp the value between the specified min and max bounds |
| * -# Clamp the resulting int32 values: |
| * - to the [0..255] range and cast to QASYMM8. |
| * - to the [-128..127] range and cast to QASYMM8_SIGNED. |
| * |
| * @attention The offset and scalar scale factor must be passed at compile time using -DRESULT_OFFSET, -DREAL_MULTIPLIER |
| * |
| * @note In case the addition of int32 biases is required, -DADD_BIAS should be passed at compile time |
| * @note The output datatype should be passed at compile time using -DOUTPUT_DATA_TYPE |
| * @note In case the clamping of the result is required, the min and max bounds can be passed at compile time using -DMIN_BOUND and -DMAX_BOUND. |
| * These values can be used to implement "rectified linear unit" activation functions |
| * @note Vector size should be given as a preprocessor argument using -DVEC_SIZE=size. e.g. -DVEC_SIZE=16 |
| * @note Leftover vector size has to be passed at compile time using -DVEC_SIZE_LEFTOVER. e.g. -DVEC_SIZE_LEFTOVER=3. It is defined as the remainder between the input's first dimension and VEC_SIZE |
| * |
| * @param[in] src_ptr Pointer to the source tensor. Supported data type: S32 |
| * @param[in] src_stride_x Stride of the source tensor in X dimension (in bytes) |
| * @param[in] src_step_x src_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] src_stride_y Stride of the source tensor in Y dimension (in bytes) |
| * @param[in] src_step_y src_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] src_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] src_step_z src_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] src_offset_first_element_in_bytes The offset of the first element in the source tensor |
| * @param[in] biases_ptr Pointer to the biases tensor. Supported data type: same as @p src_ptr |
| * @param[in] biases_stride_x Stride of the biases tensor in X dimension (in bytes) |
| * @param[in] biases_step_x biases_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] biases_offset_first_element_in_bytes The offset of the first element in the biases tensor |
| * @param[out] dst_ptr Pointer to the destination tensor Supported data type: QASYMM8 |
| * @param[in] dst_stride_x Stride of the destination tensor in X dimension (in bytes) |
| * @param[in] dst_step_x dst_gx_stride_x * number of elements along X processed per workitem(in bytes) |
| * @param[in] dst_stride_y Stride of the destination tensor in Y dimension (in bytes) |
| * @param[in] dst_step_y dst_gx_stride_y * number of elements along Y processed per workitem(in bytes) |
| * @param[in] dst_stride_z Stride of the source tensor in Z dimension (in bytes) |
| * @param[in] dst_step_z src_stride_z * number of elements along Z processed per workitem(in bytes) |
| * @param[in] dst_stride_w Stride of the source tensor in W dimension (in bytes) |
| * @param[in] dst_step_w src_stride_w * number of elements along W processed per workitem(in bytes) |
| * @param[in] dst_offset_first_element_in_bytes The offset of the first element in the destination tensor |
| */ |
| __kernel void gemmlowp_output_stage_quantize_down_float(TENSOR3D_DECLARATION(src), |
| #if defined(ADD_BIAS) |
| VECTOR_DECLARATION(biases), |
| #endif // defined(ADD_BIAS) |
| #if defined(DST_HEIGHT) |
| TENSOR4D_DECLARATION(dst)) |
| #else // defined(DST_HEIGHT) |
| TENSOR3D_DECLARATION(dst)) |
| #endif // defined(DST_HEIGHT) |
| { |
| // Compute source and destination addresses |
| int x = max((int)(get_global_id(0) * VEC_SIZE - (VEC_SIZE - VEC_SIZE_LEFTOVER) % VEC_SIZE), 0); |
| int y = get_global_id(1); |
| int z = get_global_id(2); |
| |
| __global uchar *src_addr = src_ptr + src_offset_first_element_in_bytes + x * sizeof(int) + y * src_stride_y + z * src_stride_z; |
| |
| __global uchar *dst_addr = dst_ptr + dst_offset_first_element_in_bytes + x + y * dst_stride_y + z * dst_stride_z; |
| |
| VEC_DATA_TYPE(int, VEC_SIZE) |
| input_values = VLOAD(VEC_SIZE)(0, (__global int *)src_addr); |
| |
| #if defined(ADD_BIAS) |
| // Add bias |
| __global uchar *bias_addr = biases_ptr + biases_offset_first_element_in_bytes + x * sizeof(int); |
| |
| VEC_DATA_TYPE(int, VEC_SIZE) |
| biases_values = VLOAD(VEC_SIZE)(0, (__global int *)bias_addr); |
| input_values += (int4)biases_values; |
| #endif // defined(ADD_BIAS) |
| |
| // Convert to float |
| float4 input_values_f = convert_float4(input_values); |
| input_values_f = round(input_values_f * (float)REAL_MULTIPLIER + (float)OUTPUT_OFFSET); |
| |
| VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE) |
| res0 = CONVERT_SAT(input_values_f, VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE)); |
| |
| #if defined(MIN_BOUND) |
| res0 = max(res0, (VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE))MIN_BOUND); |
| #endif // defined(MIN_BOUND) |
| #if defined(MAX_BOUND) |
| res0 = min(res0, (VEC_DATA_TYPE(OUTPUT_DATA_TYPE, VEC_SIZE))MAX_BOUND); |
| #endif // defined(MAX_BOUND) |
| |
| // Store the result |
| STORE_VECTOR_SELECT(res, OUTPUT_DATA_TYPE, dst_addr, VEC_SIZE, VEC_SIZE_LEFTOVER, VEC_SIZE_LEFTOVER != 0 && get_global_id(0) == 0) |
| } |
| #endif // defined(REAL_MULTIPLIER) && defined(OUTPUT_OFFSET) |