| # |
| # Copyright (c) 2019-2020 Arm Limited. All rights reserved. |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| # Licensed under the Apache License, Version 2.0 (the License); you may |
| # not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an AS IS BASIS, WITHOUT |
| # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| cmake_minimum_required(VERSION 3.15.6) |
| |
| project(ethosu_core_driver VERSION 0.0.1) |
| |
| # |
| # Build options |
| # |
| |
| option(DRIVER_PMU_AUTOINIT "Enable PMU boot auto-initialization" OFF) |
| option(DRIVER_LOG_SUPPORT "Enable logging." OFF) |
| |
| set(CMSIS_PATH "${CMAKE_CURRENT_SOURCE_DIR}/../cmsis" CACHE PATH "Path to CMSIS.") |
| |
| # |
| # Global settings |
| # |
| |
| if(CMAKE_SYSTEM_PROCESSOR STREQUAL "cortex-m0") |
| add_compile_definitions(CPU_CORTEX_M0) |
| elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL "cortex-m3") |
| add_compile_definitions(CPU_CORTEX_M3) |
| elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL "cortex-m33") |
| add_compile_definitions(CPU_CORTEX_M33) |
| elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL "cortex-m4") |
| add_compile_definitions(CPU_CORTEX_M4) |
| elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL "cortex-m55") |
| add_compile_definitions(CPU_CORTEX_M55) |
| elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL "cortex-m7") |
| add_compile_definitions(CPU_CORTEX_M7) |
| else() |
| message(FATAL_ERROR "Unsupported compiler ${CMAKE_SYSTEM_PROCESSOR}.") |
| endif() |
| |
| # Enable logging support |
| if(DRIVER_LOG_SUPPORT) |
| add_compile_definitions(LOG_ENABLED) |
| endif() |
| |
| # Make include directories available for current- and sub projects |
| include_directories(include src) |
| include_directories(${CMSIS_PATH}/CMSIS/Core/Include) |
| |
| # |
| # Build libraries |
| # |
| |
| # Build driver library |
| add_library(ethosu_core_driver STATIC) |
| target_include_directories(ethosu_core_driver PUBLIC include) |
| target_include_directories(ethosu_core_driver PRIVATE "${PROJECT_BINARY_DIR}/src") |
| target_sources(ethosu_core_driver PRIVATE src/ethosu_driver.c src/ethosu_device.c src/ethosu_pmu.c) |
| |
| # Configurables |
| set(NPU_QCONFIG "2" CACHE STRING "Default QCONFIG") |
| set(NPU_REGIONCFG_0 "3" CACHE STRING "Default region config 0") |
| set(NPU_REGIONCFG_1 "0" CACHE STRING "Default region config 1") |
| set(NPU_REGIONCFG_2 "1" CACHE STRING "Default region config 2") |
| set(NPU_REGIONCFG_3 "1" CACHE STRING "Default region config 3") |
| set(NPU_REGIONCFG_4 "1" CACHE STRING "Default region config 4") |
| set(NPU_REGIONCFG_5 "1" CACHE STRING "Default region config 5") |
| set(NPU_REGIONCFG_6 "1" CACHE STRING "Default region config 6") |
| set(NPU_REGIONCFG_7 "1" CACHE STRING "Default region config 7") |
| |
| set(AXI_LIMIT0_MAX_BEATS_BYTES "0x0" CACHE STRING "Default AXI_LIMIT0_MAX_BEATS_BYTES ") |
| set(AXI_LIMIT0_MEM_TYPE "0x0" CACHE STRING "Default AXI_LIMIT0_MEM_TYPE ") |
| set(AXI_LIMIT0_MAX_OUTSTANDING_READS "32" CACHE STRING "Default AXI_LIMIT0_MAX_OUTSTANDING_READS ") |
| set(AXI_LIMIT0_MAX_OUTSTANDING_WRITES "16" CACHE STRING "Default AXI_LIMIT0_MAX_OUTSTANDING_WRITES ") |
| set(AXI_LIMIT1_MAX_BEATS_BYTES "0x0" CACHE STRING "Default AXI_LIMIT1_MAX_BEATS_BYTES ") |
| set(AXI_LIMIT1_MEM_TYPE "0x0" CACHE STRING "Default AXI_LIMIT1_MEM_TYPE ") |
| set(AXI_LIMIT1_MAX_OUTSTANDING_READS "32" CACHE STRING "Default AXI_LIMIT1_MAX_OUTSTANDING_READS ") |
| set(AXI_LIMIT1_MAX_OUTSTANDING_WRITES "16" CACHE STRING "Default AXI_LIMIT1_MAX_OUTSTANDING_WRITES ") |
| set(AXI_LIMIT2_MAX_BEATS_BYTES "0x0" CACHE STRING "Default AXI_LIMIT2_MAX_BEATS_BYTES ") |
| set(AXI_LIMIT2_MEM_TYPE "0x0" CACHE STRING "Default AXI_LIMIT2_MEM_TYPE ") |
| set(AXI_LIMIT2_MAX_OUTSTANDING_READS "32" CACHE STRING "Default AXI_LIMIT2_MAX_OUTSTANDING_READS ") |
| set(AXI_LIMIT2_MAX_OUTSTANDING_WRITES "16" CACHE STRING "Default AXI_LIMIT2_MAX_OUTSTANDING_WRITES ") |
| set(AXI_LIMIT3_MAX_BEATS_BYTES "0x0" CACHE STRING "Default AXI_LIMIT3_MAX_BEATS_BYTES ") |
| set(AXI_LIMIT3_MEM_TYPE "0x0" CACHE STRING "Default AXI_LIMIT3_MEM_TYPE ") |
| set(AXI_LIMIT3_MAX_OUTSTANDING_READS "32" CACHE STRING "Default AXI_LIMIT3_MAX_OUTSTANDING_READS ") |
| set(AXI_LIMIT3_MAX_OUTSTANDING_WRITES "16" CACHE STRING "Default AXI_LIMIT3_MAX_OUTSTANDING_WRITES ") |
| |
| |
| # PMU |
| if(DRIVER_PMU_AUTOINIT) |
| set(PMU_AUTOINIT TRUE) |
| set(INIT_PMCR "0x0" CACHE STRING "Register control b0 = CNT_EN = Enable counters (RW), b1 = EVENT_CNT_RST = Reset event counters (WO), b2 = CYCLE_CNT_RST = Reset cycle counter (WO), b[15:11] = Number of event counters (RO)") |
| set(INIT_PMCNTENSET "0x0" CACHE STRING "Bit k enables event counter k. k=31 enables the cycle counter. Read value is current status.") |
| set(INIT_PMCNTENCLR "0x0" CACHE STRING "Bit k disables event counter k. k=31 disables the cycle counter. Reda value is current status.") |
| set(INIT_PMOVSSET "0x0" CACHE STRING "Overflow detection set. Bit k is for counter k. k=31 is cycle counter.") |
| set(INIT_PMOVSCLR "0x0" CACHE STRING "Overflow detection clear. Bit k is for counter k. k=31 is cycle counter.") |
| set(INIT_PMINTSET "0x0" CACHE STRING "Interrupt set. Bit k is for counter k. k=31 is cycle counter.") |
| set(INIT_PMINTCLR "0x8003" CACHE STRING "Interrupt clear. Bit k is for counter k. k=31 is cycle counter.") |
| set(INIT_PMCCNTR "0x0" CACHE STRING "Cycle counter, 48 bits value") |
| set(INIT_PMCCNTR_CFG "0x0" CACHE STRING "b[9:0] Start Event – this event number starts the cycle counter b[25:16] Stop Event – this event number stops the cycle counter") |
| endif() |
| |
| configure_file ( |
| "${PROJECT_SOURCE_DIR}/src/ethosu_config.h.in" |
| "${PROJECT_BINARY_DIR}/src/ethosu_config.h" |
| ) |
| |
| # |
| # Print build status |
| # |
| |
| message(STATUS "*******************************************************") |
| message(STATUS "PROJECT_NAME : ${PROJECT_NAME}") |
| message(STATUS "CMAKE_SYSTEM_PROCESSOR : ${CMAKE_SYSTEM_PROCESSOR}") |
| message(STATUS "CMSIS_PATH : ${CMSIS_PATH}") |
| message(STATUS "DRIVER_LOG_SUPPORT : ${DRIVER_LOG_SUPPORT}") |
| message(STATUS "*******************************************************") |