| # Copyright (C) 2020 Arm Limited or its affiliates. All rights reserved. |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| # Licensed under the Apache License, Version 2.0 (the License); you may |
| # not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an AS IS BASIS, WITHOUT |
| # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Description: |
| # Early optimisation of the network graph, using the rewrite_graph module to do the traversal of the graph. These are |
| # split into two parts optimise_graph_a and optimise_graph_b. |
| import math |
| |
| import numpy as np |
| |
| from . import lut |
| from . import rewrite_graph |
| from .data_type import DataType |
| from .errors import UnsupportedFeatureError |
| from .ethos_u55_regs.ethos_u55_regs import resampling_mode |
| from .numeric_util import full_shape |
| from .operation import NpuBlockType |
| from .operation import Operation |
| from .softmax import SoftMax |
| from .tensor import create_const_tensor |
| from .tensor import create_reshape_tensor |
| from .tensor import QuantizationParameters |
| from .tensor import Tensor |
| |
| passthrough_nodes = set(("Identity",)) |
| |
| |
| def remove_passthrough_tensor(tens, arch): |
| if len(tens.ops) == 1 and tens.ops[0].type in passthrough_nodes: |
| assert len(tens.ops[0].inputs) == 1 |
| tens = tens.ops[0].inputs[0] |
| return tens |
| |
| |
| def rewrite_concat(tens, arch): |
| if len(tens.ops) == 1 and tens.ops[0].is_concat_op(): |
| concat_op = tens.ops[0] |
| if tens != concat_op.outputs[0]: |
| return tens # don't attempt to rewrite the min/max outputs of QuantizedConcat |
| |
| # Not supported so leave it and run on CPU |
| if not concat_op.run_on_npu: |
| return tens |
| |
| inputs, axis = concat_op.get_concat_inputs_axis() |
| |
| tens.ops = [] |
| offset = 0 |
| for idx, inp in enumerate(inputs): |
| new_op = Operation("ConcatSliceWrite", concat_op.name + str(idx)) |
| new_op.inputs = [inp] |
| new_op.outputs = [tens] |
| new_op.attrs["concat_axis"] = axis |
| new_op.attrs["concat_start"] = offset |
| offset += inp.shape[axis] |
| new_op.attrs["concat_end"] = offset |
| new_op.run_on_npu = True |
| tens.ops.append(new_op) |
| assert tens.shape[axis] == offset |
| |
| # If axis corresponds to C-dimension, NHCWB16 can only be used in the output if all the concat_start's are a |
| # multiple of 16. This as, it is only then the address offset for the ofm, for all operations, will be 16 byte |
| # aligned. For other values of axis the address offsets will be 16 byte aligned, as they are all based on c = 0 |
| # and those addresses are always 16 byte aligned due to the NHCWB16 format. |
| if axis == (len(tens.shape) - 1): |
| for op in tens.ops: |
| if op.attrs["concat_start"] % 16 != 0: |
| tens.avoid_NHCWB16 = True |
| break |
| |
| return tens |
| |
| |
| def rewrite_split(tens, arch): |
| |
| if len(tens.ops) == 1 and tens.ops[0].is_split_op(): |
| split_op = tens.ops[0] |
| |
| # Not supported so leave it and run on CPU |
| if not split_op.run_on_npu: |
| return tens |
| |
| inp, outputs, axis, offset_start, offset_end = split_op.get_split_inputs_axis() |
| |
| tens.ops = [] |
| new_op = Operation("SplitSliceRead", split_op.name) |
| new_op.inputs = [inp] |
| |
| # For Split the offset cannot be extracted from the tensor so it has to |
| # be calculated from the index of the output tensor |
| if axis is not None: |
| # Get the start and end of the split |
| offset_start = [0] * len(tens.shape) |
| offset_end = [0] * len(tens.shape) |
| for out in outputs: |
| if out == tens: |
| break |
| offset_start[axis] += out.shape[axis] |
| |
| # If start offset is not a multiple of 16 in the C-dimension, NHCWB16 need to be avoided in the input |
| if (offset_start[-1] % 16) != 0: |
| inp.avoid_NHCWB16 = True |
| |
| offset_end[axis] = offset_start[axis] + tens.shape[axis] |
| |
| new_op.attrs["split_start"] = offset_start |
| new_op.attrs["split_end"] = offset_end |
| new_op.run_on_npu = True |
| new_op.set_output_tensor(tens) |
| |
| return tens |
| |
| |
| def needed_total_padding(input_size, stride, filter_size): |
| out_size = (input_size + stride - 1) // stride |
| needed_input = (out_size - 1) * stride + filter_size |
| total_padding = max(0, needed_input - input_size) |
| return total_padding |
| |
| |
| def calc_padding_and_skirt(padding_type, kernel_size, stride, input_dims): |
| ypad = needed_total_padding(int(input_dims[1]), int(stride[1]), int(kernel_size[0])) |
| xpad = needed_total_padding(int(input_dims[2]), int(stride[2]), int(kernel_size[1])) |
| if padding_type == b"SAME": |
| left_pad = (xpad + 0) // 2 |
| right_pad = (xpad + 1) // 2 |
| top_pad = (ypad + 0) // 2 |
| bottom_pad = (ypad + 1) // 2 |
| elif padding_type == b"VALID": |
| left_pad = 0 |
| right_pad = 0 |
| top_pad = 0 |
| bottom_pad = 0 |
| else: |
| raise UnsupportedFeatureError("Unknown padding {}".format(str(padding_type))) |
| padding = (top_pad, left_pad, bottom_pad, right_pad) |
| skirt = (top_pad, left_pad, ypad - top_pad, xpad - left_pad) |
| return padding, skirt |
| |
| |
| def calc_upscaled_padding_and_skirt(padding_type, kernel_size, stride, input_dims, upscaling_factor): |
| kernel_height, kernel_width = kernel_size[0], kernel_size[1] |
| if padding_type == b"SAME": |
| ypad = needed_total_padding(int(input_dims[1]) * upscaling_factor, int(stride[1]), int(kernel_height)) |
| xpad = needed_total_padding(int(input_dims[2]) * upscaling_factor, int(stride[2]), int(kernel_width)) |
| |
| right_pad = max(((xpad + 1) // upscaling_factor) - 1, 0) |
| bottom_pad = max(((ypad + 1) // upscaling_factor) - 1, 0) |
| left_pad = max(kernel_width - 1 - right_pad, 0) |
| top_pad = max(kernel_height - 1 - bottom_pad, 0) |
| |
| elif padding_type == b"VALID": |
| right_pad = max(kernel_width - 2, 0) |
| bottom_pad = max(kernel_height - 2, 0) |
| left_pad = kernel_width - 1 |
| top_pad = kernel_height - 1 |
| else: |
| assert 0, "Unknown padding" |
| |
| padding = (top_pad, left_pad, bottom_pad, right_pad) |
| skirt = padding |
| return padding, skirt |
| |
| |
| def fixup_conv2d_backprop(op, arch): |
| if op.type == "Conv2DBackpropInput": |
| # flip the inputs |
| op.inputs[0], op.inputs[2] = op.inputs[2], op.inputs[0] |
| op.type = "Conv2DBackpropInputSwitchedBias" |
| |
| # Update strides |
| op.attrs.update({"stride_w": 1, "stride_h": 1, "strides": (1, 1, 1, 1)}) |
| |
| return op |
| |
| |
| # Convert the op to an elementwise add |
| def convert_resizebilinear_1x1_to_add(op): |
| op.type = "AddAct" |
| op.name = op.name + "_add" |
| op.attrs.update({"npu_block_type": NpuBlockType.ElementWise}) |
| op.attrs["resizebilinear"] = True |
| # Create an input tensor filled with zeros |
| shape = op.outputs[0].shape |
| tens = Tensor(shape, op.inputs[0].dtype, op.inputs[1].name + "_add") |
| tens.values = np.zeros(shape) |
| tens.quant_values = np.zeros(shape, np.uint8) |
| tens.quantization = QuantizationParameters(0.0, 255.0) |
| tens.quantization.scale_f32 = 1.0 |
| tens.quantization.zero_point = 0 |
| tens.consumer_list = [op] |
| tens_op = op.inputs[1].ops[0] |
| tens_op.set_output_tensor(tens) |
| # Set the add inputs |
| op.inputs[1] = op.inputs[0] |
| op.inputs[0] = tens |
| |
| return op |
| |
| |
| # Convert ResizeBilinear to a number of 2x2 pool ops |
| def convert_resizebilinear_to_2x2_pool(op): |
| count = 0 |
| pre_op = op |
| outputs = op.outputs |
| |
| op.attrs.update({"strides": (1, 1, 1, 1), "ksize": (1, 2, 2, 1)}) |
| if op.attrs["align_corners"]: |
| shape_modifier = 1 |
| op.attrs["padding"] = b"VALID" |
| else: |
| shape_modifier = 0 |
| op.attrs["padding"] = b"SAME" |
| op.inputs[0].resampling_mode = resampling_mode.NEAREST |
| |
| upscaled_shape = np.array(op.inputs[0].shape[1:3]) |
| out_shape = np.array(op.outputs[0].shape[1:3]) |
| if (upscaled_shape == upscaled_shape * 2 - shape_modifier).all(): |
| return op |
| |
| while (upscaled_shape < out_shape).all(): |
| if count == 0: |
| scaled_op = pre_op |
| else: |
| scaled_op = op.clone("_{}".format(count)) |
| scaled_op.inputs[0] = pre_op.outputs[0] |
| |
| upscaled_shape = upscaled_shape * 2 - shape_modifier |
| |
| if (upscaled_shape == out_shape).all(): |
| scaled_op.outputs = outputs |
| scaled_op.outputs[0].ops = [scaled_op] |
| else: |
| shape = outputs[0].shape.copy() |
| shape[1:3] = upscaled_shape[0:2] |
| out_tens = Tensor(shape, DataType.int16, "{}_{}".format(op.outputs[0].name, count)) |
| out_tens.quantization = op.outputs[0].quantization.clone() |
| out_tens.quantization.quant_min = np.iinfo(np.int16).min |
| out_tens.quantization.quant_max = np.iinfo(np.int16).max |
| scaled_op.set_output_tensor(out_tens) |
| pre_op = scaled_op |
| count += 1 |
| |
| # Setup the scale value |
| if scaled_op.inputs[0].dtype.bits == 8 and scaled_op.outputs[0].dtype.bits == 16: |
| scaled_op.attrs["rescale"] = 128 |
| elif scaled_op.inputs[0].dtype.bits == 16 and scaled_op.outputs[0].dtype.bits == 8: |
| scaled_op.attrs["rescale"] = 1 / 128 |
| elif "rescale" in scaled_op.attrs: |
| del scaled_op.attrs["rescale"] |
| |
| return op |
| |
| |
| def fixup_resizebilinear(op, arch): |
| if op.type == "ResizeBilinear" and op.run_on_npu: |
| if op.inputs[0].shape == op.outputs[0].shape: |
| # Bypass nop resizebilinear |
| op.inputs = op.inputs[:1] |
| op.type = "Identity" |
| elif op.inputs[0].shape[1] == 1 and op.inputs[0].shape[2] == 1: |
| convert_resizebilinear_1x1_to_add(op) |
| else: |
| convert_resizebilinear_to_2x2_pool(op) |
| |
| return op |
| |
| |
| def fixup_fully_connected_input(op, arch): |
| if op.type == "FullyConnectedAct": |
| inp = op.inputs[0] |
| weights = op.inputs[1] |
| |
| n_in_elems = weights.shape[-2] |
| elms = inp.elements() |
| batch_size = elms // n_in_elems |
| assert batch_size * n_in_elems == elms |
| |
| desired_shape = [batch_size, n_in_elems] |
| if inp.shape != desired_shape: |
| # mismatch, insert a reshape to fix this. |
| op.inputs[0] = create_reshape_tensor(inp, desired_shape) |
| |
| return op |
| |
| |
| def fixup_pack_input(op, arch): |
| if op.type == "Pack": |
| # Pack is also referred to as Stack |
| # Requires the rewrite_concat function to be called on the op afterwards |
| axis = int(op.attrs["axis"]) |
| desired_shape = op.inputs[0].shape[:axis] + [1] + op.inputs[0].shape[axis:] |
| |
| # Construct 1 shape tensor to be used by all inserted reshape ops |
| new_shape_tens = create_const_tensor(op.name + "_reshape_shape", [1], DataType.int32, desired_shape) |
| |
| for idx, inp in enumerate(op.inputs): |
| reshape_out = inp.clone("_reshaped") |
| reshape_out.set_all_shapes(desired_shape) |
| |
| reshape_op = Operation("Reshape", "{}{}_reshape".format(op.name, idx)) |
| reshape_op.attrs["new_shape"] = desired_shape |
| reshape_op.inputs = [inp, new_shape_tens] |
| reshape_op.set_output_tensor(reshape_out) |
| |
| op.inputs[idx] = reshape_out |
| |
| op.type = "PackReshaped" |
| |
| return op |
| |
| |
| def fixup_unpack_output(tens, arch): |
| op = tens.ops[0] |
| if op.type in set(("Unpack", "StridedSlice")): |
| # Unpack is also referred to as Unstack |
| # Requires the rewrite_split function to be called on the op afterwards |
| |
| reshape_input_shape = tens.shape |
| if op.type == "StridedSlice": |
| new_axis_mask = op.attrs["new_axis_mask"] |
| shrink_axis_mask = op.attrs["shrink_axis_mask"] |
| ellipsis_mask = op.attrs["ellipsis_mask"] |
| |
| if (new_axis_mask != 0 and shrink_axis_mask != 0) or ellipsis_mask != 0: |
| # Not supported, will be put on CPU |
| return tens |
| if shrink_axis_mask == 0 and new_axis_mask == 0: |
| # Equal Rank StridedSlice, no need to insert reshape |
| return tens |
| elif shrink_axis_mask != 0: |
| n = 0 |
| axis = 0 |
| while shrink_axis_mask: |
| prev_mask = shrink_axis_mask |
| n += 1 |
| shrink_axis_mask &= shrink_axis_mask - 1 |
| axis = int(math.log2(prev_mask - shrink_axis_mask)) |
| reshape_input_shape = reshape_input_shape[:axis] + [1] + reshape_input_shape[axis:] |
| |
| assert len(tens.shape) == (len(op.inputs[0].shape) - n) |
| op.attrs["shrink_axis_mask"] = 0 |
| |
| elif new_axis_mask != 0: |
| n = 0 |
| axis = 0 |
| while new_axis_mask: |
| prev_mask = new_axis_mask |
| n += 1 |
| new_axis_mask &= new_axis_mask - 1 |
| axis = int(math.log2(prev_mask - new_axis_mask)) |
| reshape_input_shape = reshape_input_shape[:axis] + reshape_input_shape[(axis + 1) :] |
| new_axis_mask >>= 1 |
| |
| assert len(tens.shape) == (len(op.inputs[0].shape) + n) |
| op.attrs["new_axis_mask"] = 0 |
| else: |
| axis = int(op.attrs["axis"]) |
| op.type = "UnpackReshaped" |
| reshape_input_shape = tens.shape[:axis] + [1] + tens.shape[axis:] |
| |
| # Construct 1 shape tensor to be used by all inserted reshape ops |
| new_shape_tens = create_const_tensor(op.name + "_reshape_shape", [1], DataType.int32, tens.shape) |
| |
| for idx, out_tens in enumerate(op.outputs): |
| reshape_in = out_tens.clone("_reshaped") |
| reshape_in.set_all_shapes(reshape_input_shape) |
| reshape_in.ops = [op] |
| |
| reshape_op = Operation("Reshape", "{}{}_reshape".format(op.name, idx)) |
| reshape_op.attrs["new_shape"] = reshape_input_shape |
| reshape_op.inputs = [reshape_in, new_shape_tens] |
| reshape_op.set_output_tensor(out_tens) |
| |
| op.outputs[idx] = reshape_in |
| |
| return tens |
| |
| |
| def add_padding_fields(op, arch): |
| if "padding" in op.attrs: |
| if "Conv" in op.type: |
| kernel_size = op.inputs[1].shape[:2] |
| input_shape = op.inputs[0].shape |
| elif "Pool" in op.type or op.type in ("ResizeBilinear", "ReduceSum"): |
| kernel_size = op.attrs["ksize"][1:3] |
| input_shape = op.inputs[0].shape |
| elif op.type == "ExtractImagePatches": |
| kernel_size = op.attrs["ksizes"][1:3] |
| input_shape = op.inputs[0].shape |
| else: |
| raise UnsupportedFeatureError("Unknown operation that uses padding: {}".format(op.type)) |
| |
| if op.type == "Conv2DBackpropInputSwitchedBias": |
| upscaling_factor = op.outputs[0].shape[1] // input_shape[1] |
| padding, skirt = calc_upscaled_padding_and_skirt( |
| op.attrs["padding"], kernel_size, op.attrs["strides"], input_shape, upscaling_factor |
| ) |
| else: |
| dilation_h, dilation_w = op.get_dilation_h_w() |
| dilated_kernel_size = [dilation_h * (kernel_size[0] - 1) + 1, dilation_w * (kernel_size[1] - 1) + 1] |
| padding, skirt = calc_padding_and_skirt( |
| op.attrs["padding"], dilated_kernel_size, op.attrs["strides"], input_shape |
| ) |
| |
| op.attrs["explicit_padding"] = padding |
| op.attrs["skirt"] = skirt |
| |
| return op |
| |
| |
| conv_op = set(("Conv2D", "QuantizedConv2D", "Conv2DBackpropInputSwitchedBias", "Conv2DBiasAct")) |
| fc_op = set( |
| ( |
| "MatMul", |
| "QuantizedMatMul", |
| "BlockLSTM", |
| "RnnAct", |
| "UnidirectionalSequenceRnnAct", |
| "BidirectionalSequenceRnnAct", |
| "LstmAct", |
| "UnidirectionalSequenceLstmAct", |
| "BidirectionalSequenceLstmAct", |
| "FullyConnectedAct", |
| ) |
| ) |
| depthwise_op = set(("DepthwiseConv2dNative", "DepthwiseConv2dBiasAct",)) |
| pool_op = set( |
| ("AvgPool", "MaxPool", "QuantizedAvgPool", "QuantizedMaxPool", "AvgPoolAct", "MaxPoolAct", "ResizeBilinear") |
| ) |
| reduce_sum_ops = set(("ReduceSum",)) |
| elementwise_op = set(("AddAct", "MulAct", "SubAct", "Maximum", "Minimum", "LeakyRelu", "Abs", "CLZ", "SHL", "SHR")) |
| binary_elementwise_op = set(("AddAct", "MulAct", "SubAct", "Maximum", "Minimum")) |
| activation_ops = set(("Relu", "Relu6", "ReluN1To1", "Sigmoid", "Tanh")) |
| memory_only_ops = set(("Reshape",)) |
| |
| |
| # Check if the op can be reordered |
| def get_prepend_op(op): |
| inp = op.inputs[0] |
| # The op should be reordered between prev_op and prep_op |
| prev_op = inp.ops[-1] |
| prep_op = None |
| while prev_op.type in memory_only_ops and len(prev_op.outputs) == 1 and len(prev_op.outputs[0].consumers()) == 1: |
| prep_op = prev_op |
| inp = prev_op.inputs[0] |
| prev_op = inp.ops[-1] |
| if prev_op is not None and len(prev_op.outputs) == 1 and len(prev_op.outputs[0].consumers()) == 1: |
| return prep_op |
| |
| return None |
| |
| |
| def mark_npu_block_type(op, arch): |
| npu_block_type = NpuBlockType.Default |
| if op.type in conv_op: |
| npu_block_type = NpuBlockType.ConvolutionMxN |
| elif op.type in fc_op: |
| npu_block_type = NpuBlockType.VectorProduct |
| elif op.type in depthwise_op: |
| npu_block_type = NpuBlockType.ConvolutionDepthWise |
| elif op.type in pool_op: |
| npu_block_type = NpuBlockType.Pooling |
| elif op.type in elementwise_op: |
| npu_block_type = NpuBlockType.ElementWise |
| elif op.type in reduce_sum_ops: |
| npu_block_type = NpuBlockType.ReduceSum |
| |
| op.attrs["npu_block_type"] = npu_block_type |
| return op |
| |
| |
| def convert_depthwise_to_conv(op, arch): |
| # Depthwise is equivalent to a single conv2d if the ifm depth is 1 and |
| # the ofm depth equals the depth multipler. |
| # If those conditions are true, then we can perform a simple |
| # switch of the operator type (and weight order) |
| |
| if ("DepthwiseConv2d" in op.type) and (op.attrs["depth_multiplier"] != 1): |
| ifm_tensor = op.inputs[0] |
| weight_tensor = op.inputs[1] |
| ofm_tensor = op.outputs[0] |
| if (ifm_tensor.shape[3] == 1) and (ofm_tensor.shape[3] == op.attrs["depth_multiplier"]): |
| # Change op type to Conv2d |
| op.type = op.type.replace("DepthwiseConv2d", "Conv2D") |
| del op.attrs["channel_multiplier"] |
| del op.attrs["depth_multiplier"] |
| |
| weight_tensor.quant_values = np.transpose(weight_tensor.quant_values, (0, 1, 3, 2)) |
| weight_tensor.set_all_shapes(list(weight_tensor.quant_values.shape)) |
| else: |
| raise UnsupportedFeatureError( |
| "Unsupported DepthwiseConv2d with depth_multiplier = {}, ifm channels = {}, ofm channels = {}".format( |
| op.attrs["depth_multiplier"], ifm_tensor.shape[3], ofm_tensor.shape[3] |
| ) |
| ) |
| return op |
| |
| |
| def reorder_depthwise_weights(op, arch): |
| if "DepthwiseConv2d" in op.type: |
| weight_tensor = op.inputs[1] |
| weight_tensor.quant_values = np.transpose(weight_tensor.quant_values, (0, 1, 3, 2)) |
| weight_tensor.set_all_shapes(list(weight_tensor.quant_values.shape)) |
| weight_tensor.weight_transpose_depthwise = True |
| |
| return op |
| |
| |
| def convert_conv_to_fc(op, arch): |
| # Conv 1x1 can be equivalent to Fully Connected. |
| # By representing certain convs as fully connected layers, Vela can better determine wether or not to use |
| # caching/double buffering for the weights. |
| # (Weights dont need to be reloaded for convs when IFM H and W are 1) |
| if op.type == "Conv2DBiasAct": |
| _, h, w, _ = op.inputs[0].shape |
| kh, kw, _, _ = op.inputs[1].shape |
| if h == 1 and w == 1 and kh == 1 and kw == 1: |
| # Overwrite this op as a Fully Connected Op |
| op.name += "_fc" |
| op.type = "FullyConnectedAct" |
| faf = op.attrs.get("fused_activation_function", None) |
| op.attrs = { |
| "fused_activation_function": faf, |
| "weights_format": 0, |
| "npu_block_type": NpuBlockType.VectorProduct, |
| } |
| # Reshape Weights to be 2D. HWIO becomes just IO (as H and W are 1, they can just be dropped) |
| weight_tensor = op.inputs[1] |
| weight_tensor.quant_values = weight_tensor.quant_values.squeeze(axis=(0, 1)) |
| weight_tensor.set_all_shapes(list(weight_tensor.quant_values.shape)) |
| # The output from a fully connected is expected to be 2D so we need to add a reshape layer to convert it |
| # back to 4D afterwards as the next layer is expecting that shape |
| orig_ofm_tensor = op.outputs[0] |
| # Reshape this ops output to be 2D: {(N*H*W), C} (We know N H and W are all 1 so this becomes {1, C}) |
| fc_ofm_tensor = orig_ofm_tensor.clone("_fc") |
| fc_ofm_tensor.set_all_shapes([1, fc_ofm_tensor.shape[-1]]) |
| fc_ofm_tensor.ops = [op] |
| # Add a reshape after the new OFM to convert it back to the original 4D shape |
| reshape_name = op.name + "_reshape" |
| new_shape_tens = create_const_tensor(reshape_name + "_shape", [1], DataType.int32, orig_ofm_tensor.shape) |
| reshape_op = Operation("Reshape", reshape_name) |
| reshape_op.attrs["new_shape"] = orig_ofm_tensor.shape |
| reshape_op.inputs = [fc_ofm_tensor, new_shape_tens] |
| reshape_op.set_output_tensor(orig_ofm_tensor) |
| # Replace this ops OFM to point to the 2D tensor |
| op.outputs[0] = fc_ofm_tensor |
| return op |
| |
| |
| # Reorder activation op if it's after the memory only operations |
| def fixup_act_reorder(op, arch): |
| if op.type in activation_ops: |
| prep_op = get_prepend_op(op) |
| if prep_op is not None: |
| act_op = op.clone("_reordered") |
| act_op.inputs = [prep_op.inputs[0]] |
| act_op_out = act_op.inputs[0].clone("_acted") |
| act_op_out.quantization = op.outputs[0].quantization.clone() |
| act_op.set_output_tensor(act_op_out) |
| prep_op.inputs[0] = act_op_out |
| prep_op.outputs[0].quantization = act_op_out.quantization.clone() |
| |
| # Mark the op so that it will be removed as passthrough later on |
| op.type = "Identity" |
| return op |
| |
| |
| def fixup_elementwise_with_scalars(op, arch): |
| if op.type in binary_elementwise_op: |
| ifm_tensor, ifm2_tensor, _, _ = op.get_ifm_ifm2_weights_ofm() |
| if ifm2_tensor.shape != [] and ifm_tensor.shape != []: |
| diff = len(ifm_tensor.shape) - len(ifm2_tensor.shape) |
| if diff > 0: |
| ifm2_tensor.shape = full_shape(len(ifm_tensor.shape), ifm2_tensor.shape, 1) |
| elif diff < 0: |
| ifm_tensor.shape = full_shape(len(ifm2_tensor.shape), ifm_tensor.shape, 1) |
| elif ifm_tensor.shape == [] and ifm_tensor.quant_values is None: |
| # IFM is marked as a scalar, but is a result of an operation; change it to a shape of size 1 |
| ifm_tensor.shape = len(ifm2_tensor.shape) * [1] |
| ifm_tensor.storage_shape = ifm_tensor.shape |
| elif ifm2_tensor.shape == [] and ifm2_tensor.quant_values is None: |
| # IFM2 is marked as a scalar, but is a result of an operation; change it to a shape of size 1 |
| ifm2_tensor.shape = len(ifm_tensor.shape) * [1] |
| ifm2_tensor.storage_shape = ifm2_tensor.shape |
| return op |
| |
| |
| # Set input/output tensor equivalence to the same id for memory operations |
| def set_tensor_equivalence(op, arch): |
| if op.type == "Reshape": |
| eid = op.outputs[0].equivalence_id |
| for inp in op.inputs: |
| inp.equivalence_id = eid |
| return op |
| |
| |
| def convert_softmax(op, arch): |
| if op.type == "Softmax" and op.run_on_npu: |
| softmax = SoftMax(op) |
| op = softmax.get_graph() |
| return op |
| |
| |
| def convert_mul_max_to_abs_or_lrelu(op, arch): |
| r"""Whenever there is a subgraph with this topology: |
| |
| Input X For X = -1 or X > 0 |
| | \ / This subgraph can be replaced with either |
| | Mul an Abs (if X = -1) or a LeakyReLU (if X > 0) |
| | / |
| Max |
| """ |
| |
| if op.type == "Maximum": |
| # finds the Mul input(s) to the Max |
| muls = [i for i in op.inputs if i.ops[0].type == "MulAct"] |
| if len(muls) == 1: |
| mul = muls[0].ops[0] |
| elif len(muls) == 2: |
| # In the case both inputs are Muls, find the one with the same input as the Max |
| mul = [m for m in muls if len(set(op.inputs + m.ops[0].inputs)) == 1][0].ops[0] |
| else: |
| # No Mul inputs |
| return op |
| |
| # make sure the Mul doesn't have any other consumers |
| if len(mul.outputs[0].consumers()) != 1: |
| return op |
| # make sure the Mul doesn't have a faf |
| if mul.attrs["fused_activation_function"]: |
| return op |
| ifm, _, _, ofm = op.get_ifm_weights_biases_ofm() |
| if ifm.dtype not in (DataType.uint8, DataType.int8) or ifm.dtype != ofm.dtype: |
| return op |
| if not ifm.is_scaling_equal(ofm): |
| # rewrite to LeakyRelu currently only makes sense if the quantization is identical |
| return op |
| |
| # finds the branched input that goes to both the Max and the Mul |
| shared = set(op.inputs) & set(mul.inputs) |
| if len(shared) == 1: |
| shared_in = shared.pop() |
| # find the constant scalar input to the Mul |
| const_tens = (set(mul.inputs) - {shared_in}).pop() |
| # check that it is a scalar |
| if const_tens.shape != []: |
| return op |
| const = const_tens.ops[0] |
| # check that it is a constant |
| if const.type != "Const": |
| return op |
| # Remove the Mul from the shared input's consumers |
| shared_in.consumer_list.remove(mul) |
| else: |
| return op |
| |
| val = const.outputs[0].values |
| if val >= 0: |
| new_op = "LeakyRelu" |
| op.attrs["alpha"] = val |
| elif val == -1: |
| new_op = "Abs" |
| else: |
| return op |
| |
| op.type = op.type.replace("Maximum", new_op) |
| op.name = op.name.replace("Maximum", new_op) |
| op.outputs[0].name = op.outputs[0].name.replace("Maximum", new_op) |
| op.inputs = [shared_in] |
| return op |
| |
| |
| def convert_lrelu_to_mul_max(op, arch): |
| # Converts LeakyRelu to Max(alpha * IFM, identity * IFM) |
| # (the opposite of convert_mul_max_to_abs_or_lrelu) |
| ifm, _, _, ofm = op.get_ifm_weights_biases_ofm() |
| |
| # Add multiplication with alpha |
| mul_alpha = Operation("MulAct", op.name + "_mul_alpha") |
| mul_alpha.add_input_tensor(ifm) |
| # Create const tensor containing alpha as scalar |
| alpha = op.attrs["alpha"] |
| quantization = ifm.quantization.clone() |
| quantization.min = 0 |
| quantization.max = alpha * (quantization.quant_max - quantization.quant_min) |
| quantization.scale_f32 = alpha |
| quantization.zero_point = 0 |
| alpha_tens = create_const_tensor(op.name + "_alpha_scalar", [], ifm.dtype, [1], np.int8, quantization=quantization) |
| mul_alpha.add_input_tensor(alpha_tens) |
| fm_alpha = ofm.clone(op.name + "_alpha") |
| mul_alpha.set_output_tensor(fm_alpha) |
| |
| if ifm.is_scaling_equal(ofm): |
| # No identity multiplication is needed |
| fm_id = ifm |
| else: |
| # Add multiplication with identity |
| mul_identity = Operation("MulAct", op.name + "_mul_identity") |
| mul_identity.add_input_tensor(ifm) |
| # Create const tensor containing identity as scalar |
| quantization = ifm.quantization.clone() |
| quantization.min = 0 |
| quantization.max = quantization.quant_max - quantization.quant_min |
| quantization.scale_f32 = 1 |
| quantization.zero_point = 0 |
| identity_tens = create_const_tensor( |
| op.name + "_id_scalar", [], ifm.dtype, [1], np.uint8, quantization=quantization |
| ) |
| mul_identity.add_input_tensor(identity_tens) |
| fm_id = ofm.clone(op.name + "_id") |
| mul_identity.set_output_tensor(fm_id) |
| |
| # Convert LeakyRelu to Max, add the results of the multiplication(s) as inputs |
| op.type = "Maximum" |
| op.name = op.name.replace("LeakyRelu", "Maximum") |
| op.inputs = [] |
| ifm.consumer_list.remove(op) |
| op.add_input_tensor(fm_alpha) |
| op.add_input_tensor(fm_id) |
| return op |
| |
| |
| def convert_lrelu_to_lut(op, arch): |
| # Rewrite LeakyRelu by Add with scalar 0 + LUT activation |
| ifm, _, _, ofm = op.get_ifm_weights_biases_ofm() |
| assert ifm.dtype.size_in_bytes() == 1 |
| op.type = "AddAct" |
| op.name = op.name + "_add" |
| op.attrs.update({"npu_block_type": NpuBlockType.ElementWise}) |
| # Mark as no-op to enable potential fusing optimizations |
| op.attrs["is_nop"] = True |
| # Create an input tensor containing scalar zero |
| quantization = QuantizationParameters(0.0, 255.0) |
| quantization.scale_f32 = 1.0 |
| quantization.zero_point = 0 |
| tens = create_const_tensor(op.inputs[0].name + "_add", [], ifm.dtype, [0], np.uint8, quantization=quantization) |
| op.add_input_tensor(tens) |
| alpha = op.attrs["alpha"] |
| zp = ofm.quantization.zero_point |
| # Generate the LUT |
| ix = range(256) if ifm.dtype == DataType.uint8 else range(-128, 128) |
| values = [int(x) if x >= zp else int(round(zp - alpha * (zp - x))) for x in ix] |
| lut_tensor = lut.create_lut_tensor(op.name + "_lut", values, DataType.int8) |
| op.set_activation_lut(lut_tensor) |
| return op |
| |
| |
| def convert_lrelu(op, arch): |
| # Converts LeakyRelu to a LUT based solution if possible, otherwise a mul + max |
| if op.type != "LeakyRelu": |
| return op |
| ifm, _, _, ofm = op.get_ifm_weights_biases_ofm() |
| if ifm.is_scaling_equal(ofm) and ifm.dtype == ofm.dtype: |
| if ifm.dtype in (DataType.uint8, DataType.int8): |
| # use LUT |
| return convert_lrelu_to_lut(op, arch) |
| elif ifm.dtype == DataType.int16: |
| # use LeakyRelu unmodified |
| return op |
| return convert_lrelu_to_mul_max(op, arch) |
| |
| |
| def fuse_activation_function_with_prev(op, arch): |
| # if op is a no-op: attempts to move the activation function to the preceding op |
| if not op.attrs.get("is_nop", False) or op.attrs.get("fused_activation_function", None) is None: |
| return op |
| ifm, _, _, ofm = op.get_ifm_weights_biases_ofm() |
| # finds the input(s) to the operation |
| prev_op = ifm.ops[0] |
| # Note: the below checks on prev_op require that a first optimize pass on the full graph has been performed |
| fuse = ( |
| prev_op.run_on_npu |
| and prev_op.attrs["npu_block_type"] != NpuBlockType.Default |
| and len(ifm.ops) == 1 |
| and len(prev_op.outputs[0].consumers()) == 1 |
| and prev_op.attrs.get("fused_activation_function", None) is None |
| and ifm.is_scaling_equal(ofm) |
| ) |
| if op.activation_lut is not None and arch.shram_reserved_unused_banks == 0: |
| # TODO: if SHRAM LUT space is shared with SHRAM ACC (32, 64 MAC), |
| # LUT currently only works correctly for elementwise ops |
| fuse = False |
| if fuse and op.activation_lut is not None: |
| # Check if LUT can be used with prev_op |
| prev_ifm, prev_ifm2, _, _ = prev_op.get_ifm_ifm2_weights_ofm() |
| fuse = prev_ifm is not None and prev_ifm.quantization is not None and prev_ifm.is_scaling_equal(ifm) |
| if prev_ifm2 is not None: |
| fuse = fuse and prev_ifm2.quantization is not None and prev_ifm2.is_scaling_equal(ifm) |
| if not fuse: |
| return op |
| # Move the fused activation function + corresponding info to prev_op |
| for attr in ("fused_activation_function", "alpha"): |
| if attr in op.attrs: |
| prev_op.attrs[attr] = op.attrs[attr] |
| if op.activation_lut is not None: |
| prev_op.set_activation_lut(op.activation_lut) |
| # Bypass op |
| prev_op.set_output_tensor(op.outputs[0]) |
| return op |
| |
| |
| def add_attrs_to_resizebilinear(op, arch): |
| if op.type == "ResizeBilinear" and op.run_on_npu: |
| input_tensor = op.inputs[0] |
| upscaled_shape = [input_tensor.shape[1] * 2, input_tensor.shape[2] * 2] |
| out_shape = op.outputs[0].shape[1:3] |
| if not op.attrs["align_corners"] and out_shape == upscaled_shape: |
| # this means the output is supposed to be a x2 upscale, |
| # so we need to do SAME padding |
| op.attrs["padding"] = b"SAME" |
| elif op.attrs["align_corners"] and out_shape == [upscaled_shape[0] - 1, upscaled_shape[1] - 1]: |
| # here we can just run the avg pool without padding and |
| # produce a (M * 2 - 1, N * 2 - 1) sized output |
| op.attrs["padding"] = b"VALID" |
| else: |
| return op |
| input_tensor.resampling_mode = resampling_mode.NEAREST |
| op.attrs.update({"strides": (1, 1, 1, 1), "ksize": (1, 2, 2, 1)}) |
| return op |
| |
| |
| def fixup_bias_tensors(op, arch): |
| if op.needs_bias() and not op.inputs[-1]: |
| # Op has no bias, add bias tensor filled with zeros |
| nr_biases = op.inputs[1].shape[-1] |
| bias_values = [0] * nr_biases |
| bias_tensor = create_const_tensor(op.name + "_bias", [nr_biases], DataType.int32, bias_values) |
| bias_tensor.quant_values = bias_tensor.values |
| op.set_input_tensor(bias_tensor, -1) |
| |
| return op |
| |
| |
| def supported_operator_check(op, arch): |
| op.run_on_npu = arch.supported_operators.is_operator_supported(op) |
| return op |
| |
| |
| def optimise_graph_a(nng, arch, verbose_graph=False): |
| if verbose_graph: |
| nng.print_graph() |
| |
| op_rewrite_list = [ |
| # mark block type and check if the operations are supported |
| mark_npu_block_type, |
| set_tensor_equivalence, |
| supported_operator_check, |
| # then do any rewrites of supported operators |
| convert_depthwise_to_conv, |
| convert_conv_to_fc, |
| convert_softmax, |
| fixup_fully_connected_input, |
| fixup_pack_input, |
| fixup_conv2d_backprop, |
| fixup_act_reorder, |
| mark_npu_block_type, |
| fixup_elementwise_with_scalars, |
| reorder_depthwise_weights, |
| fixup_resizebilinear, |
| fixup_bias_tensors, |
| convert_mul_max_to_abs_or_lrelu, |
| convert_lrelu, |
| ] |
| |
| for idx, sg in enumerate(nng.subgraphs): |
| # rewrite graph pass |
| nng.subgraphs[idx] = rewrite_graph.rewrite_graph_pre_order( |
| sg, arch, [fixup_unpack_output], op_rewrite_list, rewrite_unsupported=False |
| ) |
| |
| for idx, sg in enumerate(nng.subgraphs): |
| # remove passthrough tensors and attempt further optimizations |
| nng.subgraphs[idx] = rewrite_graph.rewrite_graph_pre_order( |
| sg, arch, [remove_passthrough_tensor], [fuse_activation_function_with_prev, add_padding_fields] |
| ) |
| |
| if verbose_graph: |
| nng.print_graph() |
| return nng |
| |
| |
| def optimise_graph_b(nng, arch, verbose_graph=False): |
| if verbose_graph: |
| nng.print_graph() |
| |
| for idx, sg in enumerate(nng.subgraphs): |
| # combined rewrite graph pass |
| nng.subgraphs[idx] = rewrite_graph.rewrite_graph_pre_order(sg, arch, [rewrite_concat, rewrite_split], []) |
| |
| if verbose_graph: |
| nng.print_graph() |
| return nng |