MLECO-1898: removing support of legacy sse-200 platform
Signed-off-by: alexander <alexander.efremov@arm.com>
Change-Id: Ie462e786af1d429bcb815f2c10656ed82862715a
diff --git a/CMakeLists.txt b/CMakeLists.txt
index d434c9e..7bc8d08 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -71,7 +71,7 @@
mps3
STRING)
-USER_OPTION(TARGET_SUBSYSTEM "Specify platform target subsystem: sse-200, sse-300 or none"
+USER_OPTION(TARGET_SUBSYSTEM "Specify platform target subsystem: sse-300 or none"
sse-300
STRING)
diff --git a/docs/documentation.md b/docs/documentation.md
index 566feab..ece2f56 100644
--- a/docs/documentation.md
+++ b/docs/documentation.md
@@ -231,7 +231,6 @@
- [Preparing build environment](./sections/building.md#preparing-build-environment)
- [Create a build directory](./sections/building.md#create-a-build-directory)
- [Configuring the build for `MPS3: SSE-300`](./sections/building.md#configuring-the-build-for-mps3-sse-300)
- - [Configuring the build for `MPS3: SSE-200`](./sections/building.md#configuring-the-build-for-mps3-sse-200)
- [Configuring native unit-test build](./sections/building.md#configuring-native-unit-test-build)
- [Configuring the build for `simple_platform`](./sections/building.md#configuring-the-build-for-simple_platform)
- [Building the configured project](./sections/building.md#building-the-configured-project)
diff --git a/docs/sections/building.md b/docs/sections/building.md
index c53b1f5..c8eef7c 100644
--- a/docs/sections/building.md
+++ b/docs/sections/building.md
@@ -10,7 +10,6 @@
- [Preparing build environment](#preparing-build-environment)
- [Create a build directory](#create-a-build-directory)
- [Configuring the build for MPS3: SSE-300](#configuring-the-build-for-mps3-sse-300)
- - [Configuring the build for MPS3: SSE-200](#configuring-the-build-for-mps3-sse-200)
- [Configuring native unit-test build](#configuring-native-unit-test-build)
- [Configuring the build for simple_platform](#configuring-the-build-for-simple_platform)
- [Building the configured project](#building-the-configured-project)
@@ -122,7 +121,6 @@
FVP and the MPS3 FPGA, this should be left to the default value of
SSE-300:
- `sse-300` (default - [Arm® Corstone™-300](https://developer.arm.com/ip-products/subsystem/corstone/corstone-300))
- - `sse-200`
- `TENSORFLOW_SRC_PATH`: Path to the root of the TensorFlow directory.
The default value points to the TensorFlow submodule in the
@@ -331,15 +329,6 @@
> **Note:** If re-building with changed parameters values, it is
highly advised to clean the build directory and re-run the CMake command.
-### Configuring the build for MPS3: SSE-200
-
-```commandline
-cmake \
- -DTARGET_PLATFORM=mps3 \
- -DTARGET_SUBSYSTEM=sse-200 \
- -DCMAKE_TOOLCHAIN_FILE=scripts/cmake/bare-metal-toolchain.cmake ..
-```
-
### Configuring native unit-test build
```commandline
@@ -771,7 +760,6 @@
├── cmake
│ ├── ...
│ ├── subsystem-profiles
-│ │ ├── corstone-sse-200.cmake
│ │ └── corstone-sse-300.cmake
│ ├── templates
│ │ ├── mem_regions.h.template
diff --git a/docs/sections/deployment.md b/docs/sections/deployment.md
index 4c9101c..a6e9c3c 100644
--- a/docs/sections/deployment.md
+++ b/docs/sections/deployment.md
@@ -2,11 +2,13 @@
## Contents
-- [Fixed Virtual Platform](#fixed-virtual-platform)
- - [Setting up the MPS3 Arm Corstone-300 FVP](#setting-up-the-mps3-arm-corstone-300-fvp)
- - [Deploying on an FVP emulating MPS3](#deploying-on-an-fvp-emulating-mps3)
-- [MPS3 board](#mps3-board)
- - [Deployment on MPS3 board](#deployment-on-mps3-board)
+- [Deployment](#deployment)
+ - [Contents](#contents)
+ - [Fixed Virtual Platform](#fixed-virtual-platform)
+ - [Setting up the MPS3 Arm Corstone-300 FVP](#setting-up-the-mps3-arm-corstone-300-fvp)
+ - [Deploying on an FVP emulating MPS3](#deploying-on-an-fvp-emulating-mps3)
+ - [MPS3 board](#mps3-board)
+ - [Deployment on MPS3 board](#deployment-on-mps3-board)
The sample application for Arm® Ethos™-U55 can be deployed on two
target platforms, both of which implement the Arm® Corstone™-300 design (see
@@ -25,9 +27,6 @@
- Emulates MPS3 board (not for MPS2 FPGA board)
- Contains support for Arm® Ethos™-U55
-> **Note:** Currently, the FVP only has a Linux OS version. Also, there are no FVPs available for `SSE-200`
-> which satisfy the above conditions.
-
For FVP, the elf or the axf file can be run using the Fast Model
executable as outlined under the [Starting Fast Model simulation](./setup.md/#starting-fast-model-simulation)
except for the binary being pointed at here
@@ -142,7 +141,7 @@
### Deployment on MPS3 board
> **NOTE**: These instructions are valid only if the evaluation is being
- done using the MPS3 FPGA platform using either `SSE-200` or `SSE-300`.
+ done using the MPS3 FPGA platform using `SSE-300`.
To run the application on MPS3 platform, firstly it's necessary to make sure
that the platform has been set up using the correct configuration.
diff --git a/docs/use_cases/ad.md b/docs/use_cases/ad.md
index 82da9e5..5a37a0a 100644
--- a/docs/use_cases/ad.md
+++ b/docs/use_cases/ad.md
@@ -1,19 +1,19 @@
# Anomaly Detection Code Sample
-- [Introduction](#introduction)
- - [Prerequisites](#prerequisites)
-- [Building the code sample application from sources](#building-the-code-sample-application-from-sources)
- - [Build options](#build-options)
- - [Build process](#build-process)
- - [Add custom input](#add-custom-input)
- - [Add custom model](#add-custom-model)
-- [Setting-up and running Ethos-U55 Code Sample](#setting-up-and-running-ethos-u55-code-sample)
- - [Setting up the Ethos-U55 Fast Model](#setting-up-the-ethos-u55-fast-model)
- - [Starting Fast Model simulation](#starting-fast-model-simulation)
- - [Running Anomaly Detection](#running-anomaly-detection)
-- [Anomaly Detection processing information](#anomaly-detection-processing-information)
- - [Preprocessing and feature extraction](#preprocessing-and-feature-extraction)
- - [Postprocessing](#postprocessing)
+- [Anomaly Detection Code Sample](#anomaly-detection-code-sample)
+ - [Introduction](#introduction)
+ - [Preprocessing and feature extraction](#preprocessing-and-feature-extraction)
+ - [Postprocessing](#postprocessing)
+ - [Prerequisites](#prerequisites)
+ - [Building the code sample application from sources](#building-the-code-sample-application-from-sources)
+ - [Build options](#build-options)
+ - [Build process](#build-process)
+ - [Add custom input](#add-custom-input)
+ - [Add custom model](#add-custom-model)
+ - [Setting-up and running Ethos-U55 Code Sample](#setting-up-and-running-ethos-u55-code-sample)
+ - [Setting up the Ethos-U55 Fast Model](#setting-up-the-ethos-u55-fast-model)
+ - [Starting Fast Model simulation](#starting-fast-model-simulation)
+ - [Running Anomaly Detection](#running-anomaly-detection)
## Introduction
@@ -296,7 +296,7 @@
After compiling, your custom model will have now replaced the default one in the application.
>**Note:** In order to successfully run the model, the NPU needs to be enabled and
- the platform `TARGET_PLATFORM` is set to mps3 and TARGET_SUBSYSTEM is SSE-200 or SSE-300.
+ the platform `TARGET_PLATFORM` is set to `mps3` and `TARGET_SUBSYSTEM` is `SSE-300`.
## Setting-up and running Ethos-U55 Code Sample
diff --git a/scripts/cmake/bare-metal-sources.cmake b/scripts/cmake/bare-metal-sources.cmake
index 3e24d7b..8b348e3 100644
--- a/scripts/cmake/bare-metal-sources.cmake
+++ b/scripts/cmake/bare-metal-sources.cmake
@@ -48,10 +48,10 @@
# TARGET_SUBSYSTEM either should have been defined by the user or set to a default value
if (NOT DEFINED TARGET_SUBSYSTEM)
message(FATAL_ERROR "Target subsystem for mps3 undefined, "
- "specify -DTARGET_SUBSYSTEM=<sse-200 or sse-300>")
+ "specify -DTARGET_SUBSYSTEM=<sse-300>")
endif ()
- if (TARGET_SUBSYSTEM STREQUAL sse-200 OR TARGET_SUBSYSTEM STREQUAL sse-300)
+ if (TARGET_SUBSYSTEM STREQUAL sse-300)
message(STATUS "target subsystem is ${TARGET_SUBSYSTEM}")
set(BSP_PACKAGE_DIR "${PLAT_HAL}/bsp/bsp-packs/mps3")
set(SCAT_FILE "${PLAT_HAL}/bsp/mem_layout/mps3-${TARGET_SUBSYSTEM}.sct")
diff --git a/scripts/cmake/subsystem-profiles/corstone-sse-200.cmake b/scripts/cmake/subsystem-profiles/corstone-sse-200.cmake
deleted file mode 100644
index 8e2cd98..0000000
--- a/scripts/cmake/subsystem-profiles/corstone-sse-200.cmake
+++ /dev/null
@@ -1,255 +0,0 @@
-#----------------------------------------------------------------------------
-# Copyright (c) 2021 Arm Limited. All rights reserved.
-# SPDX-License-Identifier: Apache-2.0
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#----------------------------------------------------------------------------
-
-# CMake configuration file for peripheral memory map for MPS3 as per SSE-200 design
-###################################################################################################
-# Application specific config #
-###################################################################################################
-
-# This parameter is based on the linker/scatter script for SSE-200. Do not change this parameter
-# in isolation.
-set(ACTIVATION_BUF_SRAM_SZ "0x00200000" CACHE STRING "Maximum SRAM size for activation buffers")
-set(DESIGN_NAME "SSE-200" CACHE STRING "Design name")
-###################################################################################################
-# Mem sizes #
-###################################################################################################
-set(ITCM_SIZE "0x00100000" CACHE STRING "ITCM size: 1 MiB")
-set(DTCM_BLK_SIZE "0x00100000" CACHE STRING "DTCM size: 1 MiB, 4 banks")
-set(BRAM_SIZE "0x00200000" CACHE STRING "BRAM size: 2 MiB")
-set(QSPI_SRAM_SIZE "0x00800000" CACHE STRING "QSPI Flash size: 8 MiB")
-set(DDR4_BLK_SIZE "0x10000000" CACHE STRING "DDR4 block size: 256 MiB")
-
-###################################################################################################
-# Base addresses #
-###################################################################################################
-set(ITCM_BASE_NS "0x00000000" CACHE STRING "Instruction TCM Non-Secure base address")
-set(BRAM_BASE_NS "0x01000000" CACHE STRING "CODE SRAM Non-Secure base address")
-set(DTCM0_BASE_NS "0x20000000" CACHE STRING "Data TCM block 0 Non-Secure base address")
-set(DTCM1_BASE_NS "0x20100000" CACHE STRING "Data TCM block 1 Non-Secure base address")
-set(DTCM2_BASE_NS "0x20200000" CACHE STRING "Data TCM block 2 Non-Secure base address")
-set(DTCM3_BASE_NS "0x20300000" CACHE STRING "Data TCM block 3 Non-Secure base address")
-set(QSPI_SRAM_BASE_NS "0x28000000" CACHE STRING "QSPI SRAM Non-Secure base address")
-set(DDR4_BLK0_BASE_NS "0x60000000" CACHE STRING "DDR4 block 0 Non-Secure base address")
-set(DDR4_BLK1_BASE_NS "0x80000000" CACHE STRING "DDR4 block 1 Non-Secure base address")
-set(DDR4_BLK2_BASE_NS "0xA0000000" CACHE STRING "DDR4 block 2 Non-Secure base address")
-set(DDR4_BLK3_BASE_NS "0xC0000000" CACHE STRING "DDR4 block 3 Non-Secure base address")
-
-set(ITCM_BASE_S "0x10000000" CACHE STRING "Instruction TCM Secure base address")
-set(BRAM_BASE_S "0x11000000" CACHE STRING "CODE SRAM Secure base address")
-set(DTCM0_BASE_S "0x30000000" CACHE STRING "Data TCM block 0 Secure base address")
-set(DTCM1_BASE_S "0x30100000" CACHE STRING "Data TCM block 1 Secure base address")
-set(DTCM2_BASE_S "0x30200000" CACHE STRING "Data TCM block 2 Secure base address")
-set(DTCM3_BASE_S "0x30300000" CACHE STRING "Data TCM block 3 Secure base address")
-set(DDR4_BLK0_BASE_S "0x70000000" CACHE STRING "DDR4 block 0 Secure base address")
-set(DDR4_BLK1_BASE_S "0x90000000" CACHE STRING "DDR4 block 1 Secure base address")
-set(DDR4_BLK2_BASE_S "0xB0000000" CACHE STRING "DDR4 block 2 Secure base address")
-set(DDR4_BLK3_BASE_S "0xD0000000" CACHE STRING "DDR4 block 3 Secure base address")
-
-set(CMSDK_GPIO0_BASE "0x41100000" CACHE STRING "User GPIO 0 Base Address")
-set(CMSDK_GPIO1_BASE "0x41101000" CACHE STRING "User GPIO 1 Base Address")
-set(CMSDK_GPIO2_BASE "0x41102000" CACHE STRING "User GPIO 2 Base Address")
-set(CMSDK_GPIO3_BASE "0x41103000" CACHE STRING "User GPIO 3 Base Address")
-
-if (ETHOS_U55_ENABLED)
- set(ETHOS_U55_BASE "0x41700000" CACHE STRING "Ethos-U55 base address")
- set(ETHOS_U55_TA0_BASE "0x41701000" CACHE STRING "Ethos-U55's timing adapter 0 base address")
- set(ETHOS_U55_TA1_BASE "0x41701200" CACHE STRING "Ethos-U55's timing adapter 1 base address")
-endif ()
-
-set(MPS3_I2C0_BASE "0x41200000" CACHE STRING "Touch Screen I2C Base Address ")
-set(MPS3_I2C1_BASE "0x41201000" CACHE STRING "Audio Interface I2C Base Address ")
-set(MPS3_SSP2_BASE "0x41202000" CACHE STRING "ADC SPI PL022 Base Address")
-set(MPS3_SSP3_BASE "0x41203000" CACHE STRING "Shield 0 SPI PL022 Base Address")
-
-set(MPS3_SSP4_BASE "0x41204000" CACHE STRING "Shield 1 SPI PL022 Base Address")
-set(MPS3_I2C2_BASE "0x41205000" CACHE STRING "Shield 0 SBCon Base Address ")
-set(MPS3_I2C3_BASE "0x41206000" CACHE STRING "Shield 1 SBCon Base Address ")
-
-set(MPS3_I2C4_BASE "0x41207000" CACHE STRING "HDMI I2C SBCon Base Address ")
-set(MPS3_I2C5_BASE "0x41208000" CACHE STRING "DDR EPROM I2C SBCon Base Address ")
-set(MPS3_SCC_BASE "0x41300000" CACHE STRING "SCC Base Address ")
-set(MPS3_AAIC_I2S_BASE "0x41301000" CACHE STRING "Audio Interface I2S Base Address ")
-set(MPS3_FPGAIO_BASE "0x41302000" CACHE STRING "FPGA IO Base Address ")
-set(CMSDK_UART0_BASE "0x41303000" CACHE STRING "UART 0 Base Address ")
-set(CMSDK_UART1_BASE "0x41304000" CACHE STRING "UART 1 Base Address ")
-set(CMSDK_UART2_BASE "0x41305000" CACHE STRING "UART 2 Base Address ")
-set(CMSDK_UART3_BASE "0x41306000" CACHE STRING "UART 3 Base Address Shield 0")
-
-set(CMSDK_UART4_BASE "0x41307000" CACHE STRING "UART 4 Base Address Shield 1")
-set(CMSDK_UART5_BASE "0x41308000" CACHE STRING "UART 5 Base Address ")
-set(HDMI_AUDIO_BASE "0x41309000" CACHE STRING "HDMI AUDIO Base Address ")
-set(CLCD_CONFIG_BASE "0x4130A000" CACHE STRING "CLCD CONFIG Base Address ")
-set(RTC_BASE "0x4130B000" CACHE STRING "RTC Base address ")
-set(SMSC9220_BASE "0x41400000" CACHE STRING "Ethernet SMSC9220 Base Address ")
-set(USB_BASE "0x41500000" CACHE STRING "USB Base Address ")
-
-set(MPS3_eMMC_BASE "0x41702000" CACHE STRING "User eMMC Base Address")
-set(USER_BASE "0x41703000" CACHE STRING "User ? Base Address ")
-
-set(QSPI_XIP_BASE "0x41800000" CACHE STRING "QSPI XIP config Base Address ")
-set(QSPI_WRITE_BASE "0x41801000" CACHE STRING "QSPI write config Base Address ")
-
-set(SEC_CMSDK_GPIO0_BASE "0x51100000" CACHE STRING "User GPIO 0 Base Address")
-set(SEC_CMSDK_GPIO1_BASE "0x51101000" CACHE STRING "User GPIO 0 Base Address")
-set(SEC_CMSDK_GPIO2_BASE "0x51102000" CACHE STRING "User GPIO 0 Base Address")
-set(SEC_CMSDK_GPIO3_BASE "0x51103000" CACHE STRING "User GPIO 0 Base Address")
-
-set(SEC_MPS3_I2C0_BASE "0x51200000" CACHE STRING "Touch Screen I2C Base Address ")
-set(SEC_MPS3_I2C1_BASE "0x51201000" CACHE STRING "Audio Interface I2C Base Address ")
-set(SEC_MPS3_SSP2_BASE "0x51202000" CACHE STRING "ADC SPI PL022 Base Address")
-set(SEC_MPS3_SSP3_BASE "0x51203000" CACHE STRING "Shield 0 SPI PL022 Base Address")
-
-set(SEC_MPS3_SSP4_BASE "0x51204000" CACHE STRING "Shield 1 SPI PL022 Base Address")
-set(SEC_MPS3_I2C2_BASE "0x51205000" CACHE STRING "Shield 0 SBCon Base Address ")
-set(SEC_MPS3_I2C3_BASE "0x51206000" CACHE STRING "Shield 1 SBCon Base Address ")
-
-set(SEC_MPS3_I2C4_BASE "0x51207000" CACHE STRING "HDMI I2C SBCon Base Address ")
-set(SEC_MPS3_I2C5_BASE "0x51208000" CACHE STRING "DDR EPROM I2C SBCon Base Address ")
-set(SEC_MPS3_SCC_BASE "0x51300000" CACHE STRING "SCC Base Address ")
-set(SEC_MPS3_AAIC_I2S_BASE "0x51301000" CACHE STRING "Audio Interface I2S Base Address ")
-set(SEC_MPS3_FPGAIO_BASE "0x51302000" CACHE STRING "FPGA IO Base Address ")
-set(SEC_CMSDK_UART0_BASE "0x51303000" CACHE STRING "UART 0 Base Address ")
-set(SEC_CMSDK_UART1_BASE "0x51304000" CACHE STRING "UART 1 Base Address ")
-set(SEC_CMSDK_UART2_BASE "0x51305000" CACHE STRING "UART 2 Base Address ")
-set(SEC_CMSDK_UART3_BASE "0x51306000" CACHE STRING "UART 3 Base Address Shield 0")
-
-set(SEC_CMSDK_UART4_BASE "0x51307000" CACHE STRING "UART 4 Base Address Shield 1")
-set(SEC_CMSDK_UART5_BASE "0x51308000" CACHE STRING "UART 5 Base Address ")
-set(SEC_HDMI_AUDIO_BASE "0x51309000" CACHE STRING "HDMI AUDIO Base Address ")
-set(SEC_CLCD_CONFIG_BASE "0x5130A000" CACHE STRING "CLCD CONFIG Base Address ")
-set(SEC_RTC_BASE "0x5130B000" CACHE STRING "RTC Base address ")
-set(SEC_SMSC9220_BASE "0x51400000" CACHE STRING "Ethernet SMSC9220 Base Address ")
-set(SEC_USB_BASE "0x51500000" CACHE STRING "USB Base Address ")
-
-if (ETHOS_U55_ENABLED)
- set(SEC_ETHOS_U55_BASE "0x51700000" CACHE STRING "Ethos-U55 base address")
- set(SEC_ETHOS_U55_TA0_BASE "0x51701000" CACHE STRING "Ethos-U55's timing adapter 0 base address")
- set(SEC_ETHOS_U55_TA1_BASE "0x51701200" CACHE STRING "Ethos-U55's timing adapter 1 base address")
-endif ()
-
-set(SEC_MMC_BASE "0x51702000" CACHE STRING "User eMMC Base Address")
-set(SEC_USER_BASE "0x51703000" CACHE STRING "User ? Base Address ")
-
-set(SEC_QSPI_XIP_BASE "0x51800000" CACHE STRING "QSPI XIP config Base Address ")
-set(SEC_QSPI_WRITE_BASE "0x51801000" CACHE STRING "QSPI write config Base Address ")
-
-###################################################################################################
-# IRQ numbers #
-###################################################################################################
-set(NONSEC_WATCHDOG_RESET_IRQn " 0" CACHE STRING " Non-Secure Watchdog Reset Interrupt")
-set(NONSEC_WATCHDOG_IRQn " 1" CACHE STRING " Non-Secure Watchdog Interrupt ")
-set(S32K_TIMER_IRQn " 2" CACHE STRING " S32K Timer Interrupt ")
-set(TIMER0_IRQn " 3" CACHE STRING " TIMER 0 Interrupt ")
-set(TIMER1_IRQn " 4" CACHE STRING " TIMER 1 Interrupt ")
-set(DUALTIMER_IRQn " 5" CACHE STRING " Dual Timer Interrupt ")
-set(MPC_IRQn " 9" CACHE STRING " MPC Combined (Secure) Interrupt ")
-set(PPC_IRQn "10" CACHE STRING " PPC Combined (Secure) Interrupt ")
-set(MSC_IRQn "11" CACHE STRING " MSC Combined (Secure) Interrput ")
-set(BRIDGE_ERROR_IRQn "12" CACHE STRING " Bridge Error Combined (Secure) Interrupt ")
-
-set(UARTRX0_IRQn "32" CACHE STRING " UART 0 RX Interrupt ")
-set(UARTTX0_IRQn "33" CACHE STRING " UART 0 TX Interrupt ")
-set(UARTRX1_IRQn "34" CACHE STRING " UART 1 RX Interrupt ")
-set(UARTTX1_IRQn "35" CACHE STRING " UART 1 TX Interrupt ")
-set(UARTRX2_IRQn "36" CACHE STRING " UART 2 RX Interrupt ")
-set(UARTTX2_IRQn "37" CACHE STRING " UART 2 TX Interrupt ")
-set(UARTRX3_IRQn "38" CACHE STRING " UART 3 RX Interrupt ")
-set(UARTTX3_IRQn "39" CACHE STRING " UART 3 TX Interrupt ")
-set(UARTRX4_IRQn "40" CACHE STRING " UART 4 RX Interrupt ")
-set(UARTTX4_IRQn "41" CACHE STRING " UART 4 TX Interrupt ")
-set(UART0_IRQn "42" CACHE STRING " UART 0 combined Interrupt ")
-set(UART1_IRQn "43" CACHE STRING " UART 1 combined Interrupt ")
-set(UART2_IRQn "44" CACHE STRING " UART 2 combined Interrupt ")
-set(UART3_IRQn "45" CACHE STRING " UART 3 combined Interrupt ")
-set(UART4_IRQn "46" CACHE STRING " UART 4 combined Interrupt ")
-set(UARTOVF_IRQn "47" CACHE STRING " UART 0,1,2,3,4 Overflow Interrupt ")
-set(ETHERNET_IRQn "48" CACHE STRING " Ethernet Interrupt ")
-set(I2S_IRQn "49" CACHE STRING " I2S Interrupt ")
-set(TSC_IRQn "50" CACHE STRING " Touch Screen Interrupt ")
-set(SPI2_IRQn "52" CACHE STRING " SPI 2 Interrupt ")
-set(SPI3_IRQn "53" CACHE STRING " SPI 3 Interrupt ")
-set(SPI4_IRQn "54" CACHE STRING " SPI 4 Interrupt ")
-
-if (ETHOS_U55_ENABLED)
- if (CPU_CORTEX_M55 EQUAL 1)
- set(EthosU_IRQn "55" CACHE STRING " Ethos-U55 Interrupt ")
- elseif (CPU_CORTEX_M33 EQUAL 1)
- set(EthosU_IRQn "67" CACHE STRING " Ethos-U55 Interrupt ")
- endif()
-endif ()
-
-set(GPIO0_IRQn "68" CACHE STRING " GPIO 0 Combined Interrupt ")
-set(GPIO1_IRQn "69" CACHE STRING " GPIO 1 Combined Interrupt ")
-set(GPIO2_IRQn "70" CACHE STRING " GPIO 2 Combined Interrupt ")
-set(GPIO3_IRQn "71" CACHE STRING " GPIO 3 Combined Interrupt ")
-
-set(GPIO0_0_IRQn "72" CACHE STRING "")
-set(GPIO0_1_IRQn "73" CACHE STRING "")
-set(GPIO0_2_IRQn "74" CACHE STRING "")
-set(GPIO0_3_IRQn "75" CACHE STRING "")
-set(GPIO0_4_IRQn "76" CACHE STRING "")
-set(GPIO0_5_IRQn "77" CACHE STRING "")
-set(GPIO0_6_IRQn "78" CACHE STRING "")
-set(GPIO0_7_IRQn "79" CACHE STRING "")
-set(GPIO0_8_IRQn "80" CACHE STRING "")
-set(GPIO0_9_IRQn "81" CACHE STRING "")
-set(GPIO0_10_IRQn "82" CACHE STRING "")
-set(GPIO0_11_IRQn "83" CACHE STRING "")
-set(GPIO0_12_IRQn "84" CACHE STRING "")
-set(GPIO0_13_IRQn "85" CACHE STRING "")
-set(GPIO0_14_IRQn "86" CACHE STRING "")
-set(GPIO0_15_IRQn "87" CACHE STRING "")
-set(GPIO1_0_IRQn "88" CACHE STRING "")
-set(GPIO1_1_IRQn "89" CACHE STRING "")
-set(GPIO1_2_IRQn "90" CACHE STRING "")
-set(GPIO1_3_IRQn "91" CACHE STRING "")
-set(GPIO1_4_IRQn "92" CACHE STRING "")
-set(GPIO1_5_IRQn "93" CACHE STRING "")
-set(GPIO1_6_IRQn "94" CACHE STRING "")
-set(GPIO1_7_IRQn "95" CACHE STRING "")
-set(GPIO1_8_IRQn "96" CACHE STRING "")
-set(GPIO1_9_IRQn "97" CACHE STRING "")
-set(GPIO1_10_IRQn "98" CACHE STRING "")
-set(GPIO1_11_IRQn "99" CACHE STRING "")
-set(GPIO1_12_IRQn "100" CACHE STRING "")
-set(GPIO1_13_IRQn "101" CACHE STRING "")
-set(GPIO1_14_IRQn "102" CACHE STRING "")
-set(GPIO1_15_IRQn "103" CACHE STRING "")
-set(GPIO2_0_IRQn "104" CACHE STRING "")
-set(GPIO2_1_IRQn "105" CACHE STRING "")
-set(GPIO2_2_IRQn "106" CACHE STRING "")
-set(GPIO2_3_IRQn "107" CACHE STRING "")
-set(GPIO2_4_IRQn "108" CACHE STRING "")
-set(GPIO2_5_IRQn "109" CACHE STRING "")
-set(GPIO2_6_IRQn "110" CACHE STRING "")
-set(GPIO2_7_IRQn "111" CACHE STRING "")
-set(GPIO2_8_IRQn "112" CACHE STRING "")
-set(GPIO2_9_IRQn "113" CACHE STRING "")
-set(GPIO2_10_IRQn "114" CACHE STRING "")
-set(GPIO2_11_IRQn "115" CACHE STRING "")
-set(GPIO2_12_IRQn "116" CACHE STRING "")
-set(GPIO2_13_IRQn "117" CACHE STRING "")
-set(GPIO2_14_IRQn "118" CACHE STRING "")
-set(GPIO2_15_IRQn "119" CACHE STRING "")
-set(GPIO3_0_IRQn "120" CACHE STRING "")
-set(GPIO3_1_IRQn "121" CACHE STRING "")
-set(GPIO3_2_IRQn "122" CACHE STRING "")
-set(GPIO3_3_IRQn "123" CACHE STRING "")
-set(UARTRX5_IRQn "124" CACHE STRING "UART 5 RX Interrupt")
-set(UARTTX5_IRQn "125" CACHE STRING "UART 5 TX Interrupt")
-set(UART5_IRQn "126" CACHE STRING "UART 5 combined Interrupt")
-set(HDCLCD_IRQn "127" CACHE STRING "HDCLCD Interrupt")
diff --git a/scripts/py/gen_fpga_mem_map.py b/scripts/py/gen_fpga_mem_map.py
index 6a2d1d2..5703a8d 100644
--- a/scripts/py/gen_fpga_mem_map.py
+++ b/scripts/py/gen_fpga_mem_map.py
@@ -50,20 +50,6 @@
"""
# Dict with mem map and binary names we expect
self.subsystems = {
- "sse-200": {
- "mmap_mcc" : {
- # FPGA addr | MCC addr |
- "0x00000000": "0x00000000", # ITCM (NS)
- "0x10000000": "0x01000000", # ITCM (S)
- "0x20000000": "0x02000000", # DTCM (NS)
- "0x30000000": "0x03000000", # DTCM (S)
- "0x60000000": "0x08000000" # DDR (NS)
- },
- "bin_names": {
- 0: "itcm.bin",
- 1: "dram.bin"
- }
- },
"sse-300": {
"mmap_mcc" : {
# FPGA addr | MCC addr |
diff --git a/source/application/hal/platforms/bare-metal/bsp/mem_layout/mps3-sse-200.sct b/source/application/hal/platforms/bare-metal/bsp/mem_layout/mps3-sse-200.sct
deleted file mode 100644
index 293193e..0000000
--- a/source/application/hal/platforms/bare-metal/bsp/mem_layout/mps3-sse-200.sct
+++ /dev/null
@@ -1,102 +0,0 @@
-; Copyright (c) 2021 Arm Limited. All rights reserved.
-; SPDX-License-Identifier: Apache-2.0
-;
-; Licensed under the Apache License, Version 2.0 (the "License");
-; you may not use this file except in compliance with the License.
-; You may obtain a copy of the License at
-;
-; http://www.apache.org/licenses/LICENSE-2.0
-;
-; Unless required by applicable law or agreed to in writing, software
-; distributed under the License is distributed on an "AS IS" BASIS,
-; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-; See the License for the specific language governing permissions and
-; limitations under the License.
-
-; *************************************************************
-; *** Scatter-Loading Description File ***
-; *************************************************************
-;
-; Sections used:
-;---------------------------------------------------------
-; | Start | End | Size | Remarks |
-;-|-------------|-------------|-------------|------------|
-; | 0x0000_0000 | 0x0010_0000 | 0x0010_0000 | ITCM (RO) |
-; | 0x0010_0000 | 0x0030_0000 | 0x0020_0000 | BRAM (RW) |
-; | 0x2000_0000 | 0x2040_0000 | 0x0040_0000 | DTCM (RW) |
-; | 0x6000_0000 | 0x6200_0000 | 0x0200_0000 | DRAM (RW) |
-;-|-------------|-------------|-------------|------------|
-; ITCM is aliased at 0x1000_0000 (single bank)
-; BRAM is aliased at 0x1010_0000
-; DTCM is aliased at 0x3000_0000 (four banks of 1MiB each)
-; DRAM is aliased at 0x7000_0000 (section is 256MiB)
-;
-; Note: Ethos-U55 can only access DRAM and BRAM sections
-;---------------------------------------------------------
-; First load region
-;---------------------------------------------------------
-LOAD_REGION_0 0x00000000 0x00100000
-{
- ;-----------------------------------------------------
- ; First part of code mem - 1MiB
- ;-----------------------------------------------------
- itcm.bin 0x00000000 0x00100000
- {
- *.o (RESET, +First)
- * (InRoot$$Sections)
- .ANY (+RO)
- }
-
- ;-----------------------------------------------------
- ; Code memory's 2MiB - reserved for activation buffers
- ; Make sure this is uninitialised.
- ;-----------------------------------------------------
- bram.bin 0x00100000 UNINIT 0x00200000
- {
- ; activation buffers a.k.a tensor arena
- *.o (.bss.NoInit.activation_buf)
- }
-
- ;-----------------------------------------------------
- ; 1MiB bank is used for any other RW or ZI data
- ; Note: this region is internal to the Cortex-M CPU
- ;-----------------------------------------------------
- dtcm.bin 0x20000000 0x00100000
- {
- .ANY(+RW +ZI)
- }
-
- ;-----------------------------------------------------
- ; 128kiB of stack space within SRAM region
- ;-----------------------------------------------------
- ARM_LIB_STACK 0x20100000 EMPTY ALIGN 8 0x00020000
- {}
-
- ;-----------------------------------------------------
- ; 2MiB of heap space within the SRAM region
- ;-----------------------------------------------------
- ARM_LIB_HEAP 0x20200000 EMPTY ALIGN 8 0x00200000
- {}
-}
-
-;---------------------------------------------------------
-; Second load region
-;---------------------------------------------------------
-LOAD_REGION_1 0x60000000 0x02000000
-{
- ;-----------------------------------------------------
- ; 32 MiB of DRAM space for nn model and input vectors
- ;-----------------------------------------------------
- dram.bin 0x60000000 0x02000000
- {
- ; nn model's baked in input matrices
- *.o (ifm)
-
- ; nn model
- *.o (nn_model)
-
- ; if the activation buffer (tensor arena) doesn't
- ; fit in the SRAM region, we accommodate it here
- *.o (activation_buf)
- }
-}