Blame - scripts/cmake/subsystem-profiles/corstone-sse-300.cmake - ml/ethos-u/ml-embedded-evaluation-kit

alexander

3c79893

2021-03-26 21:42:19 +0000

[diff] [blame]

1

#----------------------------------------------------------------------------

2

3

# SPDX-License-Identifier: Apache-2.0

4

#

5

# Licensed under the Apache License, Version 2.0 (the "License");

6

# you may not use this file except in compliance with the License.

7

# You may obtain a copy of the License at

8

#

9

# http://www.apache.org/licenses/LICENSE-2.0

10

#

11

# Unless required by applicable law or agreed to in writing, software

12

# distributed under the License is distributed on an "AS IS" BASIS,

13

# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

14

# See the License for the specific language governing permissions and

15

# limitations under the License.

16

#----------------------------------------------------------------------------

17

18

# CMake configuration file for peripheral memory map for MPS3 as per SSE-300 design

19

###################################################################################################

alexander

3c79893

2021-03-26 21:42:19 +0000

[diff] [blame]

20

# Mem sizes #

21

###################################################################################################

22

set(ITCM_SIZE "0x00080000" CACHE STRING "ITCM size: 512 kiB")

23

set(DTCM_BLK_SIZE "0x00020000" CACHE STRING "DTCM size: 128 kiB, 4 banks")

Kshitij Sisodia

661959c

2021-11-24 10:39:52 +0000

[diff] [blame]

24

set(BRAM_SIZE "0x00100000" CACHE STRING "BRAM size: 1 MiB")

25

set(ISRAM0_SIZE "0x00100000" CACHE STRING "ISRAM0 size: 1 MiB")

26

set(ISRAM1_SIZE "0x00100000" CACHE STRING "ISRAM1 size: 1 MiB")

alexander

3c79893

2021-03-26 21:42:19 +0000

[diff] [blame]

27

set(QSPI_SRAM_SIZE "0x00800000" CACHE STRING "QSPI Flash size: 8 MiB")

28

set(DDR4_BLK_SIZE "0x10000000" CACHE STRING "DDR4 block size: 256 MiB")

29

30

###################################################################################################

31

# Base addresses for memory regions #

32

###################################################################################################

33

set(ITCM_BASE_NS "0x00000000" CACHE STRING "Instruction TCM Non-Secure base address")

34

set(BRAM_BASE_NS "0x01000000" CACHE STRING "CODE SRAM Non-Secure base address")

35

set(DTCM0_BASE_NS "0x20000000" CACHE STRING "Data TCM block 0 Non-Secure base address")

36

set(DTCM1_BASE_NS "0x20020000" CACHE STRING "Data TCM block 1 Non-Secure base address")

37

set(DTCM2_BASE_NS "0x20040000" CACHE STRING "Data TCM block 2 Non-Secure base address")

38

set(DTCM3_BASE_NS "0x20060000" CACHE STRING "Data TCM block 3 Non-Secure base address")

39

set(ISRAM0_BASE_NS "0x21000000" CACHE STRING "Internal SRAM Area Non-Secure base address")

Kshitij Sisodia

661959c

2021-11-24 10:39:52 +0000

[diff] [blame]

40

set(ISRAM1_BASE_NS "0x21100000" CACHE STRING "Internal SRAM Area Non-Secure base address")

alexander

3c79893

2021-03-26 21:42:19 +0000

[diff] [blame]

41

set(QSPI_SRAM_BASE_NS "0x28000000" CACHE STRING "QSPI SRAM Non-Secure base address")

42

set(DDR4_BLK0_BASE_NS "0x60000000" CACHE STRING "DDR4 block 0 Non-Secure base address")

43

set(DDR4_BLK1_BASE_NS "0x80000000" CACHE STRING "DDR4 block 1 Non-Secure base address")

44

set(DDR4_BLK2_BASE_NS "0xA0000000" CACHE STRING "DDR4 block 2 Non-Secure base address")

45

set(DDR4_BLK3_BASE_NS "0xC0000000" CACHE STRING "DDR4 block 3 Non-Secure base address")

46

47

set(ITCM_BASE_S "0x10000000" CACHE STRING "Instruction TCM Secure base address")

48

set(BRAM_BASE_S "0x11000000" CACHE STRING "CODE SRAM Secure base address")

49

set(DTCM0_BASE_S "0x30000000" CACHE STRING "Data TCM block 0 Secure base address")

50

set(DTCM1_BASE_S "0x30020000" CACHE STRING "Data TCM block 1 Secure base address")

51

set(DTCM2_BASE_S "0x30040000" CACHE STRING "Data TCM block 2 Secure base address")

52

set(DTCM3_BASE_S "0x30060000" CACHE STRING "Data TCM block 3 Secure base address")

53

set(ISRAM0_BASE_S "0x31000000" CACHE STRING "Internal SRAM Area Secure base address")

Kshitij Sisodia

661959c

2021-11-24 10:39:52 +0000

[diff] [blame]

54

set(ISRAM1_BASE_S "0x31100000" CACHE STRING "Internal SRAM Area Secure base address")

alexander

3c79893

2021-03-26 21:42:19 +0000

[diff] [blame]

55

set(DDR4_BLK0_BASE_S "0x70000000" CACHE STRING "DDR4 block 0 Secure base address")

56

set(DDR4_BLK1_BASE_S "0x90000000" CACHE STRING "DDR4 block 1 Secure base address")

57

set(DDR4_BLK2_BASE_S "0xB0000000" CACHE STRING "DDR4 block 2 Secure base address")

58

set(DDR4_BLK3_BASE_S "0xD0000000" CACHE STRING "DDR4 block 3 Secure base address")

59

Kshitij Sisodia

aa5e1f6

2021-09-24 14:42:08 +0100

[diff] [blame]

60

###################################################################################################

Kshitij Sisodia

f4962c8

2021-10-04 12:20:33 +0100

[diff] [blame]

61

# Application specific config #

62

###################################################################################################

Kshitij Sisodia

661959c

2021-11-24 10:39:52 +0000

[diff] [blame]

63

set(APP_NOTE "AN552")

64

set(DESIGN_NAME "Arm Corstone-300 - ${APP_NOTE}" CACHE STRING "Design name")

Kshitij Sisodia

f4962c8

2021-10-04 12:20:33 +0100

[diff] [blame]

65

Kshitij Sisodia

661959c

2021-11-24 10:39:52 +0000

[diff] [blame]

66

# The following parameter is based on the linker/scatter script for SSE-300.

67

# Do not change this parameter in isolation.

Kshitij Sisodia

f4962c8

2021-10-04 12:20:33 +0100

[diff] [blame]

68

# SRAM size reserved for activation buffers

69

math(EXPR ACTIVATION_BUF_SRAM_SZ "${ISRAM0_SIZE} + ${ISRAM1_SIZE}" OUTPUT_FORMAT HEXADECIMAL)

70

71

###################################################################################################

Kshitij Sisodia

aa5e1f6

2021-09-24 14:42:08 +0100

[diff] [blame]

72

# Base addresses for dynamic loads (to be used for FVP form only) #

73

###################################################################################################

74

# This parameter is also mentioned in the linker/scatter script for SSE-300. Do not change these

75

# parameters in isolation.

76

set(DYNAMIC_MODEL_BASE "${DDR4_BLK1_BASE_S}" CACHE STRING

77

"Region to be used for dynamic load of model into memory")

78

set(DYNAMIC_MODEL_SIZE "0x02000000" CACHE STRING "Size of the space reserved for the model")

79

math(EXPR DYNAMIC_IFM_BASE "${DYNAMIC_MODEL_BASE} + ${DYNAMIC_MODEL_SIZE}" OUTPUT_FORMAT HEXADECIMAL)

80

set(DYNAMIC_IFM_SIZE "0x01000000" CACHE STRING "Size of the space reserved for the IFM")

81

math(EXPR DYNAMIC_OFM_BASE "${DYNAMIC_IFM_BASE} + ${DYNAMIC_IFM_SIZE}" OUTPUT_FORMAT HEXADECIMAL)

82

set(DYNAMIC_OFM_SIZE "0x01000000" CACHE STRING "Size of the space reserved for the OFM")

alexander

3c79893

2021-03-26 21:42:19 +0000

[diff] [blame]

83

84

###################################################################################################

85

# Base addresses for peripherals - non secure #

86

###################################################################################################

87

set(CMSDK_GPIO0_BASE "0x41100000" CACHE STRING "User GPIO 0 Base Address (4KB)")

88

set(CMSDK_GPIO1_BASE "0x41101000" CACHE STRING "User GPIO 1 Base Address (4KB)")

89

set(CMSDK_GPIO2_BASE "0x41102000" CACHE STRING "User GPIO 2 Base Address (4KB)")

90

set(CMSDK_GPIO3_BASE "0x41103000" CACHE STRING "User GPIO 3 Base Address (4KB)")

91

92

set(AHB_USER0_BASE "0x41104000" CACHE STRING "AHB USER 0 Base Address (4KB)")

93

set(AHB_USER1_BASE "0x41105000" CACHE STRING "AHB USER 1 Base Address (4KB)")

94

set(AHB_USER2_BASE "0x41106000" CACHE STRING "AHB USER 2 Base Address (4KB)")

95

set(AHB_USER3_BASE "0x41107000" CACHE STRING "AHB USER 3 Base Address (4KB)")

96

97

set(DMA0_BASE "0x41200000" CACHE STRING "DMA0 (4KB)")

98

set(DMA1_BASE "0x41201000" CACHE STRING "DMA1 (4KB)")

99

set(DMA2_BASE "0x41202000" CACHE STRING "DMA2 (4KB)")

100

set(DMA3_BASE "0x41203000" CACHE STRING "DMA3 (4KB)")

101

102

set(SMSC9220_BASE "0x41400000" CACHE STRING "Ethernet SMSC9220 Base Address (1MB)")

103

set(USB_BASE "0x41500000" CACHE STRING "USB Base Address (1MB)")

104

105

set(USER_APB0_BASE "0x41700000" CACHE STRING "User APB0")

106

set(USER_APB1_BASE "0x41701000" CACHE STRING "User APB1")

107

set(USER_APB2_BASE "0x41702000" CACHE STRING "User APB2")

108

set(USER_APB3_BASE "0x41703000" CACHE STRING "User APB3")

109

110

set(QSPI_XIP_BASE "0x41800000" CACHE STRING "QSPI XIP config Base Address ")

111

set(QSPI_WRITE_BASE "0x41801000" CACHE STRING "QSPI write config Base Address ")

112

Cisco Cervellera

f085fa5

2021-08-02 09:32:07 +0100

[diff] [blame]

113

if (ETHOS_U_NPU_ENABLED)

114

set(ETHOS_U_NPU_BASE "0x48102000" CACHE STRING "Ethos-U NPU base address")

115

set(ETHOS_U_NPU_TA0_BASE "0x48103000" CACHE STRING "Ethos-U NPU's timing adapter 0 base address")

116

set(ETHOS_U_NPU_TA1_BASE "0x48103200" CACHE STRING "Ethos-U NPU's timing adapter 1 base address")

117

endif (ETHOS_U_NPU_ENABLED)

alexander

3c79893

2021-03-26 21:42:19 +0000

[diff] [blame]

118

119

set(MPS3_I2C0_BASE "0x49200000" CACHE STRING "Touch Screen I2C Base Address ")

120

set(MPS3_I2C1_BASE "0x49201000" CACHE STRING "Audio Interface I2C Base Address ")

121

set(MPS3_SSP2_BASE "0x49202000" CACHE STRING "ADC SPI PL022 Base Address")

122

set(MPS3_SSP3_BASE "0x49203000" CACHE STRING "Shield 0 SPI PL022 Base Address")

123

set(MPS3_SSP4_BASE "0x49204000" CACHE STRING "Shield 1 SPI PL022 Base Address")

124

set(MPS3_I2C2_BASE "0x49205000" CACHE STRING "Shield 0 SBCon Base Address ")

125

set(MPS3_I2C3_BASE "0x49206000" CACHE STRING "Shield 1 SBCon Base Address ")

126

127

set(USER_APB_BASE "0x49207000" CACHE STRING "User APB")

128

set(MPS3_I2C5_BASE "0x49208000" CACHE STRING "DDR EPROM I2C SBCon Base Address ")

129

130

set(MPS3_SCC_BASE "0x49300000" CACHE STRING "SCC Base Address ")

131

set(MPS3_AAIC_I2S_BASE "0x49301000" CACHE STRING "Audio Interface I2S Base Address ")

132

set(MPS3_FPGAIO_BASE "0x49302000" CACHE STRING "FPGA IO Base Address ")

133

134

set(CMSDK_UART0_BASE "0x49303000" CACHE STRING "UART 0 Base Address ")

135

set(CMSDK_UART1_BASE "0x49304000" CACHE STRING "UART 1 Base Address ")

136

set(CMSDK_UART2_BASE "0x49305000" CACHE STRING "UART 2 Base Address ")

137

set(CMSDK_UART3_BASE "0x49306000" CACHE STRING "UART 3 Base Address Shield 0")

138

set(CMSDK_UART4_BASE "0x49307000" CACHE STRING "UART 4 Base Address Shield 1")

139

set(CMSDK_UART5_BASE "0x49308000" CACHE STRING "UART 5 Base Address ")

140

141

set(CLCD_CONFIG_BASE "0x4930A000" CACHE STRING "CLCD CONFIG Base Address ")

142

set(RTC_BASE "0x4930B000" CACHE STRING "RTC Base address ")

143

144

###################################################################################################

145

# Base addresses for peripherals - secure #

146

###################################################################################################

147

set(SEC_CMSDK_GPIO0_BASE "0x51100000" CACHE STRING "User GPIO 0 Base Address (4KB)")

148

set(SEC_CMSDK_GPIO1_BASE "0x51101000" CACHE STRING "User GPIO 1 Base Address (4KB)")

149

set(SEC_CMSDK_GPIO2_BASE "0x51102000" CACHE STRING "User GPIO 2 Base Address (4KB)")

150

set(SEC_CMSDK_GPIO3_BASE "0x51103000" CACHE STRING "User GPIO 3 Base Address (4KB)")

151

152

set(SEC_AHB_USER0_BASE "0x51104000" CACHE STRING "AHB USER 0 Base Address (4KB)")

153

set(SEC_AHB_USER1_BASE "0x51105000" CACHE STRING "AHB USER 1 Base Address (4KB)")

154

set(SEC_AHB_USER2_BASE "0x51106000" CACHE STRING "AHB USER 2 Base Address (4KB)")

155

set(SEC_AHB_USER3_BASE "0x51107000" CACHE STRING "AHB USER 3 Base Address (4KB)")

156

157

set(SEC_DMA0_BASE "0x51200000" CACHE STRING "DMA0 (4KB)")

158

set(SEC_DMA1_BASE "0x51201000" CACHE STRING "DMA1 (4KB)")

159

set(SEC_DMA2_BASE "0x51202000" CACHE STRING "DMA2 (4KB)")

160

set(SEC_DMA3_BASE "0x51203000" CACHE STRING "DMA3 (4KB)")

161

162

set(SEC_SMSC9220_BASE "0x51400000" CACHE STRING "Ethernet SMSC9220 Base Address (1MB)")

163

set(SEC_USB_BASE "0x51500000" CACHE STRING "USB Base Address (1MB)")

164

165

set(SEC_USER_APB0_BASE "0x51700000" CACHE STRING "User APB0 Base Address")

166

set(SEC_USER_APB1_BASE "0x51701000" CACHE STRING "User APB1 Base Address")

167

set(SEC_USER_APB2_BASE "0x51702000" CACHE STRING "User APB2 Base Address")

168

set(SEC_USER_APB3_BASE "0x51703000" CACHE STRING "User APB3 Base Address")

169

170

set(SEC_QSPI_XIP_BASE "0x51800000" CACHE STRING "QSPI XIP config Base Address ")

171

set(SEC_QSPI_WRITE_BASE "0x51801000" CACHE STRING "QSPI write config Base Address ")

172

Cisco Cervellera

f085fa5

2021-08-02 09:32:07 +0100

[diff] [blame]

173

if (ETHOS_U_NPU_ENABLED)

174

set(SEC_ETHOS_U_NPU_BASE "0x58102000" CACHE STRING "Ethos-U NPU base address")

175

set(SEC_ETHOS_U_NPU_TA0_BASE "0x58103000" CACHE STRING "Ethos-U NPU's timing adapter 0 base address")

176

set(SEC_ETHOS_U_NPU_TA1_BASE "0x58103200" CACHE STRING "Ethos-U NPU's timing adapter 1 base address")

177

endif (ETHOS_U_NPU_ENABLED)

alexander

3c79893

2021-03-26 21:42:19 +0000

[diff] [blame]

178

179

set(SEC_MPS3_I2C0_BASE "0x58200000" CACHE STRING "Touch Screen I2C Base Address ")

180

set(SEC_MPS3_I2C1_BASE "0x58201000" CACHE STRING "Audio Interface I2C Base Address ")

181

set(SEC_MPS3_SSP2_BASE "0x58202000" CACHE STRING "ADC SPI PL022 Base Address")

182

set(SEC_MPS3_SSP3_BASE "0x58203000" CACHE STRING "Shield 0 SPI PL022 Base Address")

183

set(SEC_MPS3_SSP4_BASE "0x58204000" CACHE STRING "Shield 1 SPI PL022 Base Address")

184

set(SEC_MPS3_I2C2_BASE "0x58205000" CACHE STRING "Shield 0 SBCon Base Address ")

185

set(SEC_MPS3_I2C3_BASE "0x58206000" CACHE STRING "Shield 1 SBCon Base Address ")

186

187

set(SEC_USER_APB_BASE "0x58207000" CACHE STRING "User APB Base Address")

188

set(SEC_MPS3_I2C5_BASE "0x58208000" CACHE STRING "DDR EPROM I2C SBCon Base Address ")

189

190

set(SEC_MPS3_SCC_BASE "0x58300000" CACHE STRING "SCC Base Address ")

191

set(SEC_MPS3_AAIC_I2S_BASE "0x58301000" CACHE STRING "Audio Interface I2S Base Address ")

192

set(SEC_MPS3_FPGAIO_BASE "0x58302000" CACHE STRING "FPGA IO Base Address ")

193

194

set(SEC_CMSDK_UART0_BASE "0x58303000" CACHE STRING "UART 0 Base Address ")

195

set(SEC_CMSDK_UART1_BASE "0x58304000" CACHE STRING "UART 1 Base Address ")

196

set(SEC_CMSDK_UART2_BASE "0x58305000" CACHE STRING "UART 2 Base Address ")

197

set(SEC_CMSDK_UART3_BASE "0x58306000" CACHE STRING "UART 3 Base Address Shield 0")

198

set(SEC_CMSDK_UART4_BASE "0x58307000" CACHE STRING "UART 4 Base Address Shield 1")

199

set(SEC_CMSDK_UART5_BASE "0x58308000" CACHE STRING "UART 5 Base Address ")

200

201

set(SEC_CLCD_CONFIG_BASE "0x5830A000" CACHE STRING "CLCD CONFIG Base Address ")

202

set(SEC_RTC_BASE "0x5830B000" CACHE STRING "RTC Base address ")

203

204

205

###################################################################################################

206

# MPCs #

207

###################################################################################################

208

set(MPC_ISRAM0_BASE_S "0x50083000" CACHE STRING "ISRAM0 Memory Protection Controller Secure base address")

209

set(MPC_ISRAM1_BASE_S "0x50084000" CACHE STRING "ISRAM1 Memory Protection Controller Secure base address")

210

set(MPC_BRAM_BASE_S "0x57000000" CACHE STRING "SRAM Memory Protection Controller Secure base address")

211

set(MPC_QSPI_BASE_S "0x57001000" CACHE STRING "QSPI Memory Protection Controller Secure base address")

212

set(MPC_DDR4_BASE_S "0x57002000" CACHE STRING "DDR4 Memory Protection Controller Secure base address")

213

214

###################################################################################################

215

# IRQ numbers #

216

###################################################################################################

217

set(NONSEC_WATCHDOG_RESET_IRQn " 0" CACHE STRING " Non-Secure Watchdog Reset Interrupt")

218

set(NONSEC_WATCHDOG_IRQn " 1" CACHE STRING " Non-Secure Watchdog Interrupt ")

219

set(S32K_TIMER_IRQn " 2" CACHE STRING " S32K Timer Interrupt ")

220

set(TIMER0_IRQn " 3" CACHE STRING " TIMER 0 Interrupt ")

221

set(TIMER1_IRQn " 4" CACHE STRING " TIMER 1 Interrupt ")

222

set(DUALTIMER_IRQn " 5" CACHE STRING " Dual Timer Interrupt ")

223

set(MPC_IRQn " 9" CACHE STRING " MPC Combined (Secure) Interrupt ")

224

set(PPC_IRQn "10" CACHE STRING " PPC Combined (Secure) Interrupt ")

225

set(MSC_IRQn "11" CACHE STRING " MSC Combined (Secure) Interrput ")

226

set(BRIDGE_ERROR_IRQn "12" CACHE STRING " Bridge Error Combined (Secure) Interrupt ")

227

set(MGMT_PPU_IRQn "14" CACHE STRING " MGMT_PPU" )

228

set(SYS_PPU_IRQn "15" CACHE STRING " SYS_PPU" )

229

set(CPU0_PPU_IRQn "16" CACHE STRING " CPU0_PPU" )

230

set(DEBUG_PPU_IRQn "26" CACHE STRING " DEBUG_PPU" )

231

set(TIMER3_AON_IRQn "27" CACHE STRING " TIMER3_AON" )

232

set(CPU0CTIIQ0_IRQn "28" CACHE STRING " CPU0CTIIQ0" )

233

set(CPU0CTIIQ01_IRQn "29" CACHE STRING " CPU0CTIIQ01" )

234

235

set(SYS_TSTAMP_COUNTER_IRQn "32" CACHE STRING " System timestamp counter interrupt" )

236

set(UARTRX0_IRQn "33" CACHE STRING " UART 0 RX Interrupt ")

237

set(UARTTX0_IRQn "34" CACHE STRING " UART 0 TX Interrupt ")

238

set(UARTRX1_IRQn "35" CACHE STRING " UART 1 RX Interrupt ")

239

set(UARTTX1_IRQn "36" CACHE STRING " UART 1 TX Interrupt ")

240

set(UARTRX2_IRQn "37" CACHE STRING " UART 2 RX Interrupt ")

241

set(UARTTX2_IRQn "38" CACHE STRING " UART 2 TX Interrupt ")

242

set(UARTRX3_IRQn "39" CACHE STRING " UART 3 RX Interrupt ")

243

set(UARTTX3_IRQn "40" CACHE STRING " UART 3 TX Interrupt ")

244

set(UARTRX4_IRQn "41" CACHE STRING " UART 4 RX Interrupt ")

245

set(UARTTX4_IRQn "42" CACHE STRING " UART 4 TX Interrupt ")

246

set(UART0_IRQn "43" CACHE STRING " UART 0 combined Interrupt ")

247

set(UART1_IRQn "44" CACHE STRING " UART 1 combined Interrupt ")

248

set(UART2_IRQn "45" CACHE STRING " UART 2 combined Interrupt ")

249

set(UART3_IRQn "46" CACHE STRING " UART 3 combined Interrupt ")

250

set(UART4_IRQn "47" CACHE STRING " UART 4 combined Interrupt ")

251

set(UARTOVF_IRQn "48" CACHE STRING " UART 0,1,2,3,4 Overflow Interrupt ")

252

set(ETHERNET_IRQn "49" CACHE STRING " Ethernet Interrupt ")

253

set(I2S_IRQn "50" CACHE STRING " Audio I2S Interrupt ")

254

set(TSC_IRQn "51" CACHE STRING " Touch Screen Interrupt ")

255

set(USB_IRQn "52" CACHE STRING " USB Interrupt ")

256

set(SPI2_IRQn "53" CACHE STRING " ADC (SPI) Interrupt ")

257

set(SPI3_IRQn "54" CACHE STRING " SPI 3 Interrupt (Shield 0) ")

258

set(SPI4_IRQn "55" CACHE STRING " SPI 4 Interrupt (Sheild 1) ")

259

Cisco Cervellera

f085fa5

2021-08-02 09:32:07 +0100

[diff] [blame]

260

if (ETHOS_U_NPU_ENABLED)

Kshitij Sisodia

661959c

2021-11-24 10:39:52 +0000

[diff] [blame]

261

set(EthosU_IRQn "56" CACHE STRING " Ethos-U55 Interrupt ")

alexander

3c79893

2021-03-26 21:42:19 +0000

[diff] [blame]

262

endif ()

263

264

set(GPIO0_IRQn "69" CACHE STRING " GPIO 0 Combined Interrupt ")

265

set(GPIO1_IRQn "70" CACHE STRING " GPIO 1 Combined Interrupt ")

266

set(GPIO2_IRQn "71" CACHE STRING " GPIO 2 Combined Interrupt ")

267

set(GPIO3_IRQn "72" CACHE STRING " GPIO 3 Combined Interrupt ")

268

269

set(GPIO0_0_IRQn "73" CACHE STRING "")

270

set(GPIO0_1_IRQn "74" CACHE STRING "")

271

set(GPIO0_2_IRQn "75" CACHE STRING "")

272

set(GPIO0_3_IRQn "76" CACHE STRING "")

273

set(GPIO0_4_IRQn "77" CACHE STRING "")

274

set(GPIO0_5_IRQn "78" CACHE STRING "")

275

set(GPIO0_6_IRQn "79" CACHE STRING "")

276

set(GPIO0_7_IRQn "80" CACHE STRING "")

277

set(GPIO0_8_IRQn "81" CACHE STRING "")

278

set(GPIO0_9_IRQn "82" CACHE STRING "")

279

set(GPIO0_10_IRQn "83" CACHE STRING "")

280

set(GPIO0_11_IRQn "84" CACHE STRING "")

281

set(GPIO0_12_IRQn "85" CACHE STRING "")

282

set(GPIO0_13_IRQn "86" CACHE STRING "")

283

set(GPIO0_14_IRQn "87" CACHE STRING "")

284

set(GPIO0_15_IRQn "88" CACHE STRING "")

285

set(GPIO1_0_IRQn "89" CACHE STRING "")

286

set(GPIO1_1_IRQn "90" CACHE STRING "")

287

set(GPIO1_2_IRQn "91" CACHE STRING "")

288

set(GPIO1_3_IRQn "92" CACHE STRING "")

289

set(GPIO1_4_IRQn "93" CACHE STRING "")

290

set(GPIO1_5_IRQn "94" CACHE STRING "")

291

set(GPIO1_6_IRQn "95" CACHE STRING "")

292

set(GPIO1_7_IRQn "96" CACHE STRING "")

293

set(GPIO1_8_IRQn "97" CACHE STRING "")

294

set(GPIO1_9_IRQn "98" CACHE STRING "")

295

set(GPIO1_10_IRQn "99" CACHE STRING "")

296

set(GPIO1_11_IRQn "100" CACHE STRING "")

297

set(GPIO1_12_IRQn "101" CACHE STRING "")

298

set(GPIO1_13_IRQn "102" CACHE STRING "")

299

set(GPIO1_14_IRQn "103" CACHE STRING "")

300

set(GPIO1_15_IRQn "104" CACHE STRING "")

301

set(GPIO2_0_IRQn "105" CACHE STRING "")

302

set(GPIO2_1_IRQn "106" CACHE STRING "")

303

set(GPIO2_2_IRQn "107" CACHE STRING "")

304

set(GPIO2_3_IRQn "108" CACHE STRING "")

305

set(GPIO2_4_IRQn "109" CACHE STRING "")

306

set(GPIO2_5_IRQn "110" CACHE STRING "")

307

set(GPIO2_6_IRQn "111" CACHE STRING "")

308

set(GPIO2_7_IRQn "112" CACHE STRING "")

309

set(GPIO2_8_IRQn "113" CACHE STRING "")

310

set(GPIO2_9_IRQn "114" CACHE STRING "")

311

set(GPIO2_10_IRQn "115" CACHE STRING "")

312

set(GPIO2_11_IRQn "116" CACHE STRING "")

313

set(GPIO2_12_IRQn "117" CACHE STRING "")

314

set(GPIO2_13_IRQn "118" CACHE STRING "")

315

set(GPIO2_14_IRQn "119" CACHE STRING "")

316

set(GPIO2_15_IRQn "120" CACHE STRING "")

317

set(GPIO3_0_IRQn "121" CACHE STRING "")

318

set(GPIO3_1_IRQn "122" CACHE STRING "")

319

set(GPIO3_2_IRQn "123" CACHE STRING "")

320

set(GPIO3_3_IRQn "124" CACHE STRING "")

321

set(UARTRX5_IRQn "125" CACHE STRING "UART 5 RX Interrupt")

322

set(UARTTX5_IRQn "126" CACHE STRING "UART 5 TX Interrupt")

323

set(UART5_IRQn "127" CACHE STRING "UART 5 combined Interrupt")