| # SPDX-FileCopyrightText: Copyright 2020 Arm Limited and/or its affiliates <open-source-office@arm.com> |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| # Licensed under the Apache License, Version 2.0 (the License); you may |
| # not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an AS IS BASIS, WITHOUT |
| # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| |
| |
| from ctypes import * |
| from enum import Enum |
| |
| ARCH_VER = '1.0.6' |
| |
| |
| class BASE(Enum): |
| ID = 0x0000 |
| STATUS = 0x0004 |
| CMD = 0x0008 |
| RESET = 0x000C |
| QBASE0 = 0x0010 |
| QBASE1 = 0x0014 |
| QREAD = 0x0018 |
| QCONFIG = 0x001C |
| QSIZE = 0x0020 |
| PROT = 0x0024 |
| CONFIG = 0x0028 |
| LOCK = 0x002C |
| REGIONCFG = 0x003C |
| AXI_LIMIT0 = 0x0040 |
| AXI_LIMIT1 = 0x0044 |
| AXI_LIMIT2 = 0x0048 |
| AXI_LIMIT3 = 0x004C |
| SIZE = 0x0050 |
| |
| class BASE_POINTERS(Enum): |
| BASEP0 = 0x0080 |
| BASEP1 = 0x0084 |
| BASEP2 = 0x0088 |
| BASEP3 = 0x008C |
| BASEP4 = 0x0090 |
| BASEP5 = 0x0094 |
| BASEP6 = 0x0098 |
| BASEP7 = 0x009C |
| BASEP8 = 0x00A0 |
| BASEP9 = 0x00A4 |
| BASEP10 = 0x00A8 |
| BASEP11 = 0x00AC |
| BASEP12 = 0x00B0 |
| BASEP13 = 0x00B4 |
| BASEP14 = 0x00B8 |
| BASEP15 = 0x00BC |
| SIZE = 0x00C0 |
| |
| class DEBUG(Enum): |
| WD_STATUS = 0x0100 |
| MAC_STATUS = 0x0104 |
| AO_STATUS = 0x0108 |
| DMA_STATUS0 = 0x0110 |
| DMA_STATUS1 = 0x0114 |
| CLKFORCE = 0x0140 |
| DEBUG_ADDRESS = 0x0144 |
| DEBUG_MISC = 0x0148 |
| DEBUGCORE = 0x014C |
| DEBUG_BLOCK = 0x0150 |
| SIZE = 0x0154 |
| |
| class ID(Enum): |
| REVISION = 0x0FC0 |
| PID4 = 0x0FD0 |
| PID5 = 0x0FD4 |
| PID6 = 0x0FD8 |
| PID7 = 0x0FDC |
| PID0 = 0x0FE0 |
| PID1 = 0x0FE4 |
| PID2 = 0x0FE8 |
| PID3 = 0x0FEC |
| CID0 = 0x0FF0 |
| CID1 = 0x0FF4 |
| CID2 = 0x0FF8 |
| CID3 = 0x0FFC |
| SIZE = 0x1000 |
| |
| class PMU(Enum): |
| PMCR = 0x0180 |
| PMCNTENSET = 0x0184 |
| PMCNTENCLR = 0x0188 |
| PMOVSSET = 0x018C |
| PMOVSCLR = 0x0190 |
| PMINTSET = 0x0194 |
| PMINTCLR = 0x0198 |
| PMCCNTR_LO = 0x01A0 |
| PMCCNTR_HI = 0x01A4 |
| PMCCNTR_CFG = 0x01A8 |
| PMCAXI_CHAN = 0x01AC |
| PMEVCNTR0 = 0x0300 |
| PMEVCNTR1 = 0x0304 |
| PMEVCNTR2 = 0x0308 |
| PMEVCNTR3 = 0x030C |
| PMEVTYPER0 = 0x0380 |
| PMEVTYPER1 = 0x0384 |
| PMEVTYPER2 = 0x0388 |
| PMEVTYPER3 = 0x038C |
| SIZE = 0x0390 |
| |
| class SHARED_BUFFER(Enum): |
| SHARED_BUFFER0 = 0x0400 |
| SHARED_BUFFER1 = 0x0404 |
| SHARED_BUFFER2 = 0x0408 |
| SHARED_BUFFER3 = 0x040C |
| SHARED_BUFFER4 = 0x0410 |
| SHARED_BUFFER5 = 0x0414 |
| SHARED_BUFFER6 = 0x0418 |
| SHARED_BUFFER7 = 0x041C |
| SHARED_BUFFER8 = 0x0420 |
| SHARED_BUFFER9 = 0x0424 |
| SHARED_BUFFER10 = 0x0428 |
| SHARED_BUFFER11 = 0x042C |
| SHARED_BUFFER12 = 0x0430 |
| SHARED_BUFFER13 = 0x0434 |
| SHARED_BUFFER14 = 0x0438 |
| SHARED_BUFFER15 = 0x043C |
| SHARED_BUFFER16 = 0x0440 |
| SHARED_BUFFER17 = 0x0444 |
| SHARED_BUFFER18 = 0x0448 |
| SHARED_BUFFER19 = 0x044C |
| SHARED_BUFFER20 = 0x0450 |
| SHARED_BUFFER21 = 0x0454 |
| SHARED_BUFFER22 = 0x0458 |
| SHARED_BUFFER23 = 0x045C |
| SHARED_BUFFER24 = 0x0460 |
| SHARED_BUFFER25 = 0x0464 |
| SHARED_BUFFER26 = 0x0468 |
| SHARED_BUFFER27 = 0x046C |
| SHARED_BUFFER28 = 0x0470 |
| SHARED_BUFFER29 = 0x0474 |
| SHARED_BUFFER30 = 0x0478 |
| SHARED_BUFFER31 = 0x047C |
| SHARED_BUFFER32 = 0x0480 |
| SHARED_BUFFER33 = 0x0484 |
| SHARED_BUFFER34 = 0x0488 |
| SHARED_BUFFER35 = 0x048C |
| SHARED_BUFFER36 = 0x0490 |
| SHARED_BUFFER37 = 0x0494 |
| SHARED_BUFFER38 = 0x0498 |
| SHARED_BUFFER39 = 0x049C |
| SHARED_BUFFER40 = 0x04A0 |
| SHARED_BUFFER41 = 0x04A4 |
| SHARED_BUFFER42 = 0x04A8 |
| SHARED_BUFFER43 = 0x04AC |
| SHARED_BUFFER44 = 0x04B0 |
| SHARED_BUFFER45 = 0x04B4 |
| SHARED_BUFFER46 = 0x04B8 |
| SHARED_BUFFER47 = 0x04BC |
| SHARED_BUFFER48 = 0x04C0 |
| SHARED_BUFFER49 = 0x04C4 |
| SHARED_BUFFER50 = 0x04C8 |
| SHARED_BUFFER51 = 0x04CC |
| SHARED_BUFFER52 = 0x04D0 |
| SHARED_BUFFER53 = 0x04D4 |
| SHARED_BUFFER54 = 0x04D8 |
| SHARED_BUFFER55 = 0x04DC |
| SHARED_BUFFER56 = 0x04E0 |
| SHARED_BUFFER57 = 0x04E4 |
| SHARED_BUFFER58 = 0x04E8 |
| SHARED_BUFFER59 = 0x04EC |
| SHARED_BUFFER60 = 0x04F0 |
| SHARED_BUFFER61 = 0x04F4 |
| SHARED_BUFFER62 = 0x04F8 |
| SHARED_BUFFER63 = 0x04FC |
| SHARED_BUFFER64 = 0x0500 |
| SHARED_BUFFER65 = 0x0504 |
| SHARED_BUFFER66 = 0x0508 |
| SHARED_BUFFER67 = 0x050C |
| SHARED_BUFFER68 = 0x0510 |
| SHARED_BUFFER69 = 0x0514 |
| SHARED_BUFFER70 = 0x0518 |
| SHARED_BUFFER71 = 0x051C |
| SHARED_BUFFER72 = 0x0520 |
| SHARED_BUFFER73 = 0x0524 |
| SHARED_BUFFER74 = 0x0528 |
| SHARED_BUFFER75 = 0x052C |
| SHARED_BUFFER76 = 0x0530 |
| SHARED_BUFFER77 = 0x0534 |
| SHARED_BUFFER78 = 0x0538 |
| SHARED_BUFFER79 = 0x053C |
| SHARED_BUFFER80 = 0x0540 |
| SHARED_BUFFER81 = 0x0544 |
| SHARED_BUFFER82 = 0x0548 |
| SHARED_BUFFER83 = 0x054C |
| SHARED_BUFFER84 = 0x0550 |
| SHARED_BUFFER85 = 0x0554 |
| SHARED_BUFFER86 = 0x0558 |
| SHARED_BUFFER87 = 0x055C |
| SHARED_BUFFER88 = 0x0560 |
| SHARED_BUFFER89 = 0x0564 |
| SHARED_BUFFER90 = 0x0568 |
| SHARED_BUFFER91 = 0x056C |
| SHARED_BUFFER92 = 0x0570 |
| SHARED_BUFFER93 = 0x0574 |
| SHARED_BUFFER94 = 0x0578 |
| SHARED_BUFFER95 = 0x057C |
| SHARED_BUFFER96 = 0x0580 |
| SHARED_BUFFER97 = 0x0584 |
| SHARED_BUFFER98 = 0x0588 |
| SHARED_BUFFER99 = 0x058C |
| SHARED_BUFFER100 = 0x0590 |
| SHARED_BUFFER101 = 0x0594 |
| SHARED_BUFFER102 = 0x0598 |
| SHARED_BUFFER103 = 0x059C |
| SHARED_BUFFER104 = 0x05A0 |
| SHARED_BUFFER105 = 0x05A4 |
| SHARED_BUFFER106 = 0x05A8 |
| SHARED_BUFFER107 = 0x05AC |
| SHARED_BUFFER108 = 0x05B0 |
| SHARED_BUFFER109 = 0x05B4 |
| SHARED_BUFFER110 = 0x05B8 |
| SHARED_BUFFER111 = 0x05BC |
| SHARED_BUFFER112 = 0x05C0 |
| SHARED_BUFFER113 = 0x05C4 |
| SHARED_BUFFER114 = 0x05C8 |
| SHARED_BUFFER115 = 0x05CC |
| SHARED_BUFFER116 = 0x05D0 |
| SHARED_BUFFER117 = 0x05D4 |
| SHARED_BUFFER118 = 0x05D8 |
| SHARED_BUFFER119 = 0x05DC |
| SHARED_BUFFER120 = 0x05E0 |
| SHARED_BUFFER121 = 0x05E4 |
| SHARED_BUFFER122 = 0x05E8 |
| SHARED_BUFFER123 = 0x05EC |
| SHARED_BUFFER124 = 0x05F0 |
| SHARED_BUFFER125 = 0x05F4 |
| SHARED_BUFFER126 = 0x05F8 |
| SHARED_BUFFER127 = 0x05FC |
| SHARED_BUFFER128 = 0x0600 |
| SHARED_BUFFER129 = 0x0604 |
| SHARED_BUFFER130 = 0x0608 |
| SHARED_BUFFER131 = 0x060C |
| SHARED_BUFFER132 = 0x0610 |
| SHARED_BUFFER133 = 0x0614 |
| SHARED_BUFFER134 = 0x0618 |
| SHARED_BUFFER135 = 0x061C |
| SHARED_BUFFER136 = 0x0620 |
| SHARED_BUFFER137 = 0x0624 |
| SHARED_BUFFER138 = 0x0628 |
| SHARED_BUFFER139 = 0x062C |
| SHARED_BUFFER140 = 0x0630 |
| SHARED_BUFFER141 = 0x0634 |
| SHARED_BUFFER142 = 0x0638 |
| SHARED_BUFFER143 = 0x063C |
| SHARED_BUFFER144 = 0x0640 |
| SHARED_BUFFER145 = 0x0644 |
| SHARED_BUFFER146 = 0x0648 |
| SHARED_BUFFER147 = 0x064C |
| SHARED_BUFFER148 = 0x0650 |
| SHARED_BUFFER149 = 0x0654 |
| SHARED_BUFFER150 = 0x0658 |
| SHARED_BUFFER151 = 0x065C |
| SHARED_BUFFER152 = 0x0660 |
| SHARED_BUFFER153 = 0x0664 |
| SHARED_BUFFER154 = 0x0668 |
| SHARED_BUFFER155 = 0x066C |
| SHARED_BUFFER156 = 0x0670 |
| SHARED_BUFFER157 = 0x0674 |
| SHARED_BUFFER158 = 0x0678 |
| SHARED_BUFFER159 = 0x067C |
| SHARED_BUFFER160 = 0x0680 |
| SHARED_BUFFER161 = 0x0684 |
| SHARED_BUFFER162 = 0x0688 |
| SHARED_BUFFER163 = 0x068C |
| SHARED_BUFFER164 = 0x0690 |
| SHARED_BUFFER165 = 0x0694 |
| SHARED_BUFFER166 = 0x0698 |
| SHARED_BUFFER167 = 0x069C |
| SHARED_BUFFER168 = 0x06A0 |
| SHARED_BUFFER169 = 0x06A4 |
| SHARED_BUFFER170 = 0x06A8 |
| SHARED_BUFFER171 = 0x06AC |
| SHARED_BUFFER172 = 0x06B0 |
| SHARED_BUFFER173 = 0x06B4 |
| SHARED_BUFFER174 = 0x06B8 |
| SHARED_BUFFER175 = 0x06BC |
| SHARED_BUFFER176 = 0x06C0 |
| SHARED_BUFFER177 = 0x06C4 |
| SHARED_BUFFER178 = 0x06C8 |
| SHARED_BUFFER179 = 0x06CC |
| SHARED_BUFFER180 = 0x06D0 |
| SHARED_BUFFER181 = 0x06D4 |
| SHARED_BUFFER182 = 0x06D8 |
| SHARED_BUFFER183 = 0x06DC |
| SHARED_BUFFER184 = 0x06E0 |
| SHARED_BUFFER185 = 0x06E4 |
| SHARED_BUFFER186 = 0x06E8 |
| SHARED_BUFFER187 = 0x06EC |
| SHARED_BUFFER188 = 0x06F0 |
| SHARED_BUFFER189 = 0x06F4 |
| SHARED_BUFFER190 = 0x06F8 |
| SHARED_BUFFER191 = 0x06FC |
| SHARED_BUFFER192 = 0x0700 |
| SHARED_BUFFER193 = 0x0704 |
| SHARED_BUFFER194 = 0x0708 |
| SHARED_BUFFER195 = 0x070C |
| SHARED_BUFFER196 = 0x0710 |
| SHARED_BUFFER197 = 0x0714 |
| SHARED_BUFFER198 = 0x0718 |
| SHARED_BUFFER199 = 0x071C |
| SHARED_BUFFER200 = 0x0720 |
| SHARED_BUFFER201 = 0x0724 |
| SHARED_BUFFER202 = 0x0728 |
| SHARED_BUFFER203 = 0x072C |
| SHARED_BUFFER204 = 0x0730 |
| SHARED_BUFFER205 = 0x0734 |
| SHARED_BUFFER206 = 0x0738 |
| SHARED_BUFFER207 = 0x073C |
| SHARED_BUFFER208 = 0x0740 |
| SHARED_BUFFER209 = 0x0744 |
| SHARED_BUFFER210 = 0x0748 |
| SHARED_BUFFER211 = 0x074C |
| SHARED_BUFFER212 = 0x0750 |
| SHARED_BUFFER213 = 0x0754 |
| SHARED_BUFFER214 = 0x0758 |
| SHARED_BUFFER215 = 0x075C |
| SHARED_BUFFER216 = 0x0760 |
| SHARED_BUFFER217 = 0x0764 |
| SHARED_BUFFER218 = 0x0768 |
| SHARED_BUFFER219 = 0x076C |
| SHARED_BUFFER220 = 0x0770 |
| SHARED_BUFFER221 = 0x0774 |
| SHARED_BUFFER222 = 0x0778 |
| SHARED_BUFFER223 = 0x077C |
| SHARED_BUFFER224 = 0x0780 |
| SHARED_BUFFER225 = 0x0784 |
| SHARED_BUFFER226 = 0x0788 |
| SHARED_BUFFER227 = 0x078C |
| SHARED_BUFFER228 = 0x0790 |
| SHARED_BUFFER229 = 0x0794 |
| SHARED_BUFFER230 = 0x0798 |
| SHARED_BUFFER231 = 0x079C |
| SHARED_BUFFER232 = 0x07A0 |
| SHARED_BUFFER233 = 0x07A4 |
| SHARED_BUFFER234 = 0x07A8 |
| SHARED_BUFFER235 = 0x07AC |
| SHARED_BUFFER236 = 0x07B0 |
| SHARED_BUFFER237 = 0x07B4 |
| SHARED_BUFFER238 = 0x07B8 |
| SHARED_BUFFER239 = 0x07BC |
| SHARED_BUFFER240 = 0x07C0 |
| SHARED_BUFFER241 = 0x07C4 |
| SHARED_BUFFER242 = 0x07C8 |
| SHARED_BUFFER243 = 0x07CC |
| SHARED_BUFFER244 = 0x07D0 |
| SHARED_BUFFER245 = 0x07D4 |
| SHARED_BUFFER246 = 0x07D8 |
| SHARED_BUFFER247 = 0x07DC |
| SHARED_BUFFER248 = 0x07E0 |
| SHARED_BUFFER249 = 0x07E4 |
| SHARED_BUFFER250 = 0x07E8 |
| SHARED_BUFFER251 = 0x07EC |
| SHARED_BUFFER252 = 0x07F0 |
| SHARED_BUFFER253 = 0x07F4 |
| SHARED_BUFFER254 = 0x07F8 |
| SHARED_BUFFER255 = 0x07FC |
| SIZE = 0x0800 |
| |
| class TSU(Enum): |
| IFM_PAD_TOP = 0x0800 |
| IFM_PAD_LEFT = 0x0804 |
| IFM_PAD_RIGHT = 0x0808 |
| IFM_PAD_BOTTOM = 0x080C |
| IFM_DEPTH_M1 = 0x0810 |
| IFM_PRECISION = 0x0814 |
| IFM_UPSCALE = 0x081C |
| IFM_ZERO_POINT = 0x0824 |
| IFM_WIDTH0_M1 = 0x0828 |
| IFM_HEIGHT0_M1 = 0x082C |
| IFM_HEIGHT1_M1 = 0x0830 |
| IFM_IB_END = 0x0834 |
| IFM_REGION = 0x083C |
| OFM_WIDTH_M1 = 0x0844 |
| OFM_HEIGHT_M1 = 0x0848 |
| OFM_DEPTH_M1 = 0x084C |
| OFM_PRECISION = 0x0850 |
| OFM_BLK_WIDTH_M1 = 0x0854 |
| OFM_BLK_HEIGHT_M1 = 0x0858 |
| OFM_BLK_DEPTH_M1 = 0x085C |
| OFM_ZERO_POINT = 0x0860 |
| OFM_WIDTH0_M1 = 0x0868 |
| OFM_HEIGHT0_M1 = 0x086C |
| OFM_HEIGHT1_M1 = 0x0870 |
| OFM_REGION = 0x087C |
| KERNEL_WIDTH_M1 = 0x0880 |
| KERNEL_HEIGHT_M1 = 0x0884 |
| KERNEL_STRIDE = 0x0888 |
| PARALLEL_MODE = 0x088C |
| ACC_FORMAT = 0x0890 |
| ACTIVATION = 0x0894 |
| ACTIVATION_MIN = 0x0898 |
| ACTIVATION_MAX = 0x089C |
| WEIGHT_REGION = 0x08A0 |
| SCALE_REGION = 0x08A4 |
| AB_START = 0x08B4 |
| BLOCKDEP = 0x08BC |
| DMA0_SRC_REGION = 0x08C0 |
| DMA0_DST_REGION = 0x08C4 |
| DMA0_SIZE0 = 0x08C8 |
| DMA0_SIZE1 = 0x08CC |
| IFM2_BROADCAST = 0x0900 |
| IFM2_SCALAR = 0x0904 |
| IFM2_PRECISION = 0x0914 |
| IFM2_ZERO_POINT = 0x0924 |
| IFM2_WIDTH0_M1 = 0x0928 |
| IFM2_HEIGHT0_M1 = 0x092C |
| IFM2_HEIGHT1_M1 = 0x0930 |
| IFM2_IB_START = 0x0934 |
| IFM2_REGION = 0x093C |
| IFM_BASE0 = 0x0A00 |
| IFM_BASE0_HI = 0x0A04 |
| IFM_BASE1 = 0x0A08 |
| IFM_BASE1_HI = 0x0A0C |
| IFM_BASE2 = 0x0A10 |
| IFM_BASE2_HI = 0x0A14 |
| IFM_BASE3 = 0x0A18 |
| IFM_BASE3_HI = 0x0A1C |
| IFM_STRIDE_X = 0x0A20 |
| IFM_STRIDE_X_HI = 0x0A24 |
| IFM_STRIDE_Y = 0x0A28 |
| IFM_STRIDE_Y_HI = 0x0A2C |
| IFM_STRIDE_C = 0x0A30 |
| IFM_STRIDE_C_HI = 0x0A34 |
| OFM_BASE0 = 0x0A40 |
| OFM_BASE0_HI = 0x0A44 |
| OFM_BASE1 = 0x0A48 |
| OFM_BASE1_HI = 0x0A4C |
| OFM_BASE2 = 0x0A50 |
| OFM_BASE2_HI = 0x0A54 |
| OFM_BASE3 = 0x0A58 |
| OFM_BASE3_HI = 0x0A5C |
| OFM_STRIDE_X = 0x0A60 |
| OFM_STRIDE_X_HI = 0x0A64 |
| OFM_STRIDE_Y = 0x0A68 |
| OFM_STRIDE_Y_HI = 0x0A6C |
| OFM_STRIDE_C = 0x0A70 |
| OFM_STRIDE_C_HI = 0x0A74 |
| WEIGHT_BASE = 0x0A80 |
| WEIGHT_BASE_HI = 0x0A84 |
| WEIGHT_LENGTH = 0x0A88 |
| SCALE_BASE = 0x0A90 |
| SCALE_BASE_HI = 0x0A94 |
| SCALE_LENGTH = 0x0A98 |
| OFM_SCALE = 0x0AA0 |
| OFM_SCALE_SHIFT = 0x0AA4 |
| OPA_SCALE = 0x0AA8 |
| OPA_SCALE_SHIFT = 0x0AAC |
| OPB_SCALE = 0x0AB0 |
| DMA0_SRC = 0x0AC0 |
| DMA0_SRC_HI = 0x0AC4 |
| DMA0_DST = 0x0AC8 |
| DMA0_DST_HI = 0x0ACC |
| DMA0_LEN = 0x0AD0 |
| DMA0_LEN_HI = 0x0AD4 |
| DMA0_SKIP0 = 0x0AD8 |
| DMA0_SKIP0_HI = 0x0ADC |
| DMA0_SKIP1 = 0x0AE0 |
| DMA0_SKIP1_HI = 0x0AE4 |
| IFM2_BASE0 = 0x0B00 |
| IFM2_BASE0_HI = 0x0B04 |
| IFM2_BASE1 = 0x0B08 |
| IFM2_BASE1_HI = 0x0B0C |
| IFM2_BASE2 = 0x0B10 |
| IFM2_BASE2_HI = 0x0B14 |
| IFM2_BASE3 = 0x0B18 |
| IFM2_BASE3_HI = 0x0B1C |
| IFM2_STRIDE_X = 0x0B20 |
| IFM2_STRIDE_X_HI = 0x0B24 |
| IFM2_STRIDE_Y = 0x0B28 |
| IFM2_STRIDE_Y_HI = 0x0B2C |
| IFM2_STRIDE_C = 0x0B30 |
| IFM2_STRIDE_C_HI = 0x0B34 |
| WEIGHT1_BASE = 0x0B40 |
| WEIGHT1_BASE_HI = 0x0B44 |
| WEIGHT1_LENGTH = 0x0B48 |
| SCALE1_BASE = 0x0B50 |
| SCALE1_BASE_HI = 0x0B54 |
| SCALE1_LENGTH = 0x0B58 |
| SIZE = 0x0B5C |
| |
| class TSU_DEBUG(Enum): |
| KERNEL_X = 0x0200 |
| KERNEL_Y = 0x0204 |
| KERNEL_W_M1 = 0x0208 |
| KERNEL_H_M1 = 0x020C |
| OFM_CBLK_WIDTH_M1 = 0x0210 |
| OFM_CBLK_HEIGHT_M1 = 0x0214 |
| OFM_CBLK_DEPTH_M1 = 0x0218 |
| IFM_CBLK_DEPTH_M1 = 0x021C |
| OFM_X = 0x0220 |
| OFM_Y = 0x0224 |
| OFM_Z = 0x0228 |
| IFM_Z = 0x022C |
| PAD_TOP = 0x0230 |
| PAD_LEFT = 0x0234 |
| IFM_CBLK_WIDTH = 0x0238 |
| IFM_CBLK_HEIGHT = 0x023C |
| DMA_IFM_SRC = 0x0240 |
| DMA_IFM_SRC_HI = 0x0244 |
| DMA_IFM_DST = 0x0248 |
| DMA_OFM_SRC = 0x024C |
| DMA_OFM_DST = 0x0250 |
| DMA_OFM_DST_HI = 0x0254 |
| DMA_WEIGHT_SRC = 0x0258 |
| DMA_WEIGHT_SRC_HI = 0x025C |
| DMA_CMD_SRC = 0x0260 |
| DMA_CMD_SRC_HI = 0x0264 |
| DMA_CMD_SIZE = 0x0268 |
| DMA_M2M_SRC = 0x026C |
| DMA_M2M_SRC_HI = 0x0270 |
| DMA_M2M_DST = 0x0274 |
| DMA_M2M_DST_HI = 0x0278 |
| CURRENT_QREAD = 0x027C |
| DMA_SCALE_SRC = 0x0280 |
| DMA_SCALE_SRC_HI = 0x0284 |
| CURRENT_BLOCK = 0x02B4 |
| CURRENT_OP = 0x02B8 |
| CURRENT_CMD = 0x02BC |
| SIZE = 0x02C0 |
| |
| |
| |
| class acc_format(Enum): |
| INT_32BIT = 0 |
| INT_40BIT = 1 |
| FP_S5_10 = 2 |
| |
| class activation(Enum): |
| NONE = 0 |
| TANH = 3 |
| SIGMOID = 4 |
| LUT_START = 16 |
| LUT_END = 23 |
| |
| class axi_mem_encoding_type(Enum): |
| DEVICE_NON_BUFFERABLE = 0x0 |
| DEVICE_BUFFERABLE = 0x1 |
| NORMAL_NON_CACHEABLE_NON_BUFFERABLE = 0x2 |
| NORMAL_NON_CACHEABLE_BUFFERABLE = 0x3 |
| WRITE_THROUGH_NO_ALLOCATE = 0x4 |
| WRITE_THROUGH_READ_ALLOCATE = 0x5 |
| WRITE_THROUGH_WRITE_ALLOCATE = 0x6 |
| WRITE_THROUGH_READ_AND_WRITE_ALLOCATE = 0x7 |
| WRITE_BACK_NO_ALLOCATE = 0x8 |
| WRITE_BACK_READ_ALLOCATE = 0x9 |
| WRITE_BACK_WRITE_ALLOCATE = 0xA |
| WRITE_BACK_READ_AND_WRITE_ALLOCATE = 0xB |
| RESERVED_12 = 0xC |
| RESERVED_13 = 0xD |
| RESERVED_14 = 0xE |
| RESERVED_15 = 0xF |
| |
| class clip_range(Enum): |
| OFM_PRECISION = 0 |
| FORCE_UINT8 = 2 |
| FORCE_INT8 = 3 |
| FORCE_INT16 = 5 |
| |
| class cmd0(Enum): |
| NPU_OP_STOP = 0x000 |
| NPU_OP_IRQ = 0x001 |
| NPU_OP_CONV = 0x002 |
| NPU_OP_DEPTHWISE = 0x003 |
| NPU_OP_POOL = 0x005 |
| NPU_OP_ELEMENTWISE = 0x006 |
| NPU_OP_DMA_START = 0x010 |
| NPU_OP_DMA_WAIT = 0x011 |
| NPU_OP_KERNEL_WAIT = 0x012 |
| NPU_OP_PMU_MASK = 0x013 |
| NPU_SET_IFM_PAD_TOP = 0x100 |
| NPU_SET_IFM_PAD_LEFT = 0x101 |
| NPU_SET_IFM_PAD_RIGHT = 0x102 |
| NPU_SET_IFM_PAD_BOTTOM = 0x103 |
| NPU_SET_IFM_DEPTH_M1 = 0x104 |
| NPU_SET_IFM_PRECISION = 0x105 |
| NPU_SET_IFM_UPSCALE = 0x107 |
| NPU_SET_IFM_ZERO_POINT = 0x109 |
| NPU_SET_IFM_WIDTH0_M1 = 0x10A |
| NPU_SET_IFM_HEIGHT0_M1 = 0x10B |
| NPU_SET_IFM_HEIGHT1_M1 = 0x10C |
| NPU_SET_IFM_IB_END = 0x10D |
| NPU_SET_IFM_REGION = 0x10F |
| NPU_SET_OFM_WIDTH_M1 = 0x111 |
| NPU_SET_OFM_HEIGHT_M1 = 0x112 |
| NPU_SET_OFM_DEPTH_M1 = 0x113 |
| NPU_SET_OFM_PRECISION = 0x114 |
| NPU_SET_OFM_BLK_WIDTH_M1 = 0x115 |
| NPU_SET_OFM_BLK_HEIGHT_M1 = 0x116 |
| NPU_SET_OFM_BLK_DEPTH_M1 = 0x117 |
| NPU_SET_OFM_ZERO_POINT = 0x118 |
| NPU_SET_OFM_WIDTH0_M1 = 0x11A |
| NPU_SET_OFM_HEIGHT0_M1 = 0x11B |
| NPU_SET_OFM_HEIGHT1_M1 = 0x11C |
| NPU_SET_OFM_REGION = 0x11F |
| NPU_SET_KERNEL_WIDTH_M1 = 0x120 |
| NPU_SET_KERNEL_HEIGHT_M1 = 0x121 |
| NPU_SET_KERNEL_STRIDE = 0x122 |
| NPU_SET_PARALLEL_MODE = 0x123 |
| NPU_SET_ACC_FORMAT = 0x124 |
| NPU_SET_ACTIVATION = 0x125 |
| NPU_SET_ACTIVATION_MIN = 0x126 |
| NPU_SET_ACTIVATION_MAX = 0x127 |
| NPU_SET_WEIGHT_REGION = 0x128 |
| NPU_SET_SCALE_REGION = 0x129 |
| NPU_SET_AB_START = 0x12D |
| NPU_SET_BLOCKDEP = 0x12F |
| NPU_SET_DMA0_SRC_REGION = 0x130 |
| NPU_SET_DMA0_DST_REGION = 0x131 |
| NPU_SET_DMA0_SIZE0 = 0x132 |
| NPU_SET_DMA0_SIZE1 = 0x133 |
| NPU_SET_IFM2_BROADCAST = 0x180 |
| NPU_SET_IFM2_SCALAR = 0x181 |
| NPU_SET_IFM2_PRECISION = 0x185 |
| NPU_SET_IFM2_ZERO_POINT = 0x189 |
| NPU_SET_IFM2_WIDTH0_M1 = 0x18A |
| NPU_SET_IFM2_HEIGHT0_M1 = 0x18B |
| NPU_SET_IFM2_HEIGHT1_M1 = 0x18C |
| NPU_SET_IFM2_IB_START = 0x18D |
| NPU_SET_IFM2_REGION = 0x18F |
| |
| class cmd1(Enum): |
| NPU_SET_IFM_BASE0 = 0x000 |
| NPU_SET_IFM_BASE1 = 0x001 |
| NPU_SET_IFM_BASE2 = 0x002 |
| NPU_SET_IFM_BASE3 = 0x003 |
| NPU_SET_IFM_STRIDE_X = 0x004 |
| NPU_SET_IFM_STRIDE_Y = 0x005 |
| NPU_SET_IFM_STRIDE_C = 0x006 |
| NPU_SET_OFM_BASE0 = 0x010 |
| NPU_SET_OFM_BASE1 = 0x011 |
| NPU_SET_OFM_BASE2 = 0x012 |
| NPU_SET_OFM_BASE3 = 0x013 |
| NPU_SET_OFM_STRIDE_X = 0x014 |
| NPU_SET_OFM_STRIDE_Y = 0x015 |
| NPU_SET_OFM_STRIDE_C = 0x016 |
| NPU_SET_WEIGHT_BASE = 0x020 |
| NPU_SET_WEIGHT_LENGTH = 0x021 |
| NPU_SET_SCALE_BASE = 0x022 |
| NPU_SET_SCALE_LENGTH = 0x023 |
| NPU_SET_OFM_SCALE = 0x024 |
| NPU_SET_OPA_SCALE = 0x025 |
| NPU_SET_OPB_SCALE = 0x026 |
| NPU_SET_DMA0_SRC = 0x030 |
| NPU_SET_DMA0_DST = 0x031 |
| NPU_SET_DMA0_LEN = 0x032 |
| NPU_SET_DMA0_SKIP0 = 0x033 |
| NPU_SET_DMA0_SKIP1 = 0x034 |
| NPU_SET_IFM2_BASE0 = 0x080 |
| NPU_SET_IFM2_BASE1 = 0x081 |
| NPU_SET_IFM2_BASE2 = 0x082 |
| NPU_SET_IFM2_BASE3 = 0x083 |
| NPU_SET_IFM2_STRIDE_X = 0x084 |
| NPU_SET_IFM2_STRIDE_Y = 0x085 |
| NPU_SET_IFM2_STRIDE_C = 0x086 |
| NPU_SET_WEIGHT1_BASE = 0x090 |
| NPU_SET_WEIGHT1_LENGTH = 0x091 |
| NPU_SET_SCALE1_BASE = 0x092 |
| NPU_SET_SCALE1_LENGTH = 0x093 |
| |
| class data_format(Enum): |
| NHWC = 0 |
| NHCWB16 = 1 |
| |
| class elementwise_mode(Enum): |
| MUL = 0 |
| ADD = 1 |
| SUB = 2 |
| MIN = 3 |
| MAX = 4 |
| LRELU = 5 |
| ABS = 6 |
| CLZ = 7 |
| SHR = 8 |
| SHL = 9 |
| |
| class ifm_precision(Enum): |
| U8 = 0 |
| S8 = 1 |
| U16 = 4 |
| S16 = 5 |
| S32 = 9 |
| |
| class ifm_scale_mode(Enum): |
| SCALE_16BIT = 0 |
| SCALE_OPA_32BIT = 1 |
| SCALE_OPB_32BIT = 2 |
| |
| class macs_per_cc(Enum): |
| MACS_PER_CC_IS_5 = 0x5 |
| MACS_PER_CC_IS_6 = 0x6 |
| MACS_PER_CC_IS_7 = 0x7 |
| MACS_PER_CC_IS_8 = 0x8 |
| |
| class memory_type(Enum): |
| AXI0_OUTSTANDING_COUNTER0 = 0 |
| AXI0_OUTSTANDING_COUNTER1 = 1 |
| AXI1_OUTSTANDING_COUNTER2 = 2 |
| AXI1_OUTSTANDING_COUNTER3 = 3 |
| |
| class ofm_precision(Enum): |
| U8 = 0 |
| S8 = 1 |
| U16 = 2 |
| S16 = 3 |
| S32 = 5 |
| |
| class pmu_event_type(Enum): |
| NO_EVENT = 0x00 |
| CYCLE = 0x11 |
| NPU_IDLE = 0x20 |
| CC_STALLED_ON_BLOCKDEP = 0x21 |
| CC_STALLED_ON_SHRAM_RECONFIG = 0x22 |
| NPU_ACTIVE = 0x23 |
| MAC_ACTIVE = 0x30 |
| MAC_ACTIVE_8BIT = 0x31 |
| MAC_ACTIVE_16BIT = 0x32 |
| MAC_DPU_ACTIVE = 0x33 |
| MAC_STALLED_BY_WD_ACC = 0x34 |
| MAC_STALLED_BY_WD = 0x35 |
| MAC_STALLED_BY_ACC = 0x36 |
| MAC_STALLED_BY_IB = 0x37 |
| MAC_ACTIVE_32BIT = 0x38 |
| MAC_STALLED_BY_INT_W = 0x39 |
| MAC_STALLED_BY_INT_ACC = 0x3A |
| AO_ACTIVE = 0x40 |
| AO_ACTIVE_8BIT = 0x41 |
| AO_ACTIVE_16BIT = 0x42 |
| AO_STALLED_BY_OFMP_OB = 0x43 |
| AO_STALLED_BY_OFMP = 0x44 |
| AO_STALLED_BY_OB = 0x45 |
| AO_STALLED_BY_ACC_IB = 0x46 |
| AO_STALLED_BY_ACC = 0x47 |
| AO_STALLED_BY_IB = 0x48 |
| WD_ACTIVE = 0x50 |
| WD_STALLED = 0x51 |
| WD_STALLED_BY_WS = 0x52 |
| WD_STALLED_BY_WD_BUF = 0x53 |
| WD_PARSE_ACTIVE = 0x54 |
| WD_PARSE_STALLED = 0x55 |
| WD_PARSE_STALLED_IN = 0x56 |
| WD_PARSE_STALLED_OUT = 0x57 |
| WD_TRANS_WS = 0x58 |
| WD_TRANS_WB = 0x59 |
| WD_TRANS_DW0 = 0x5a |
| WD_TRANS_DW1 = 0x5b |
| AXI0_RD_TRANS_ACCEPTED = 0x80 |
| AXI0_RD_TRANS_COMPLETED = 0x81 |
| AXI0_RD_DATA_BEAT_RECEIVED = 0x82 |
| AXI0_RD_TRAN_REQ_STALLED = 0x83 |
| AXI0_WR_TRANS_ACCEPTED = 0x84 |
| AXI0_WR_TRANS_COMPLETED_M = 0x85 |
| AXI0_WR_TRANS_COMPLETED_S = 0x86 |
| AXI0_WR_DATA_BEAT_WRITTEN = 0x87 |
| AXI0_WR_TRAN_REQ_STALLED = 0x88 |
| AXI0_WR_DATA_BEAT_STALLED = 0x89 |
| AXI0_ENABLED_CYCLES = 0x8c |
| AXI0_RD_STALL_LIMIT = 0x8e |
| AXI0_WR_STALL_LIMIT = 0x8f |
| AXI1_RD_TRANS_ACCEPTED = 0x180 |
| AXI1_RD_TRANS_COMPLETED = 0x181 |
| AXI1_RD_DATA_BEAT_RECEIVED = 0x182 |
| AXI1_RD_TRAN_REQ_STALLED = 0x183 |
| AXI1_WR_TRANS_ACCEPTED = 0x184 |
| AXI1_WR_TRANS_COMPLETED_M = 0x185 |
| AXI1_WR_TRANS_COMPLETED_S = 0x186 |
| AXI1_WR_DATA_BEAT_WRITTEN = 0x187 |
| AXI1_WR_TRAN_REQ_STALLED = 0x188 |
| AXI1_WR_DATA_BEAT_STALLED = 0x189 |
| AXI1_ENABLED_CYCLES = 0x18c |
| AXI1_RD_STALL_LIMIT = 0x18e |
| AXI1_WR_STALL_LIMIT = 0x18f |
| AXI_LATENCY_ANY = 0xa0 |
| AXI_LATENCY_32 = 0xa1 |
| AXI_LATENCY_64 = 0xa2 |
| AXI_LATENCY_128 = 0xa3 |
| AXI_LATENCY_256 = 0xa4 |
| AXI_LATENCY_512 = 0xa5 |
| AXI_LATENCY_1024 = 0xa6 |
| ECC_DMA = 0xb0 |
| ECC_SB0 = 0xb1 |
| ECC_SB1 = 0x1b1 |
| |
| class pooling_mode(Enum): |
| MAX = 0 |
| AVERAGE = 1 |
| REDUCE_SUM = 2 |
| |
| class privilege_level(Enum): |
| USER = 0 |
| PRIVILEGED = 1 |
| |
| class resampling_mode(Enum): |
| NONE = 0 |
| NEAREST = 1 |
| TRANSPOSE = 2 |
| |
| class rounding(Enum): |
| TFL = 0 |
| TRUNCATE = 1 |
| NATURAL = 2 |
| |
| class security_level(Enum): |
| SECURE = 0 |
| NON_SECURE = 1 |
| |
| class shram_size(Enum): |
| SHRAM_96KB = 0x60 |
| SHRAM_48KB = 0x30 |
| SHRAM_24KB = 0x18 |
| SHRAM_16KB = 0x10 |
| |
| class state(Enum): |
| STOPPED = 0 |
| RUNNING = 1 |
| |
| class stride_mode(Enum): |
| STRIDE_MODE_1D = 0 |
| STRIDE_MODE_2D = 1 |
| STRIDE_MODE_3D = 2 |
| |
| |
| class id_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("version_status", c_uint32, 4), |
| ("version_minor", c_uint32, 4), |
| ("version_major", c_uint32, 4), |
| ("product_major", c_uint32, 4), |
| ("arch_patch_rev", c_uint32, 4), |
| ("arch_minor_rev", c_uint32, 8), |
| ("arch_major_rev", c_uint32, 4), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_version_status(self, value): self.bits.version_status = value |
| def get_version_status(self): value = self.bits.version_status; return value |
| def set_version_minor(self, value): self.bits.version_minor = value |
| def get_version_minor(self): value = self.bits.version_minor; return value |
| def set_version_major(self, value): self.bits.version_major = value |
| def get_version_major(self): value = self.bits.version_major; return value |
| def set_product_major(self, value): self.bits.product_major = value |
| def get_product_major(self): value = self.bits.product_major; return value |
| def set_arch_patch_rev(self, value): self.bits.arch_patch_rev = value |
| def get_arch_patch_rev(self): value = self.bits.arch_patch_rev; return value |
| def set_arch_minor_rev(self, value): self.bits.arch_minor_rev = value |
| def get_arch_minor_rev(self): value = self.bits.arch_minor_rev; return value |
| def set_arch_major_rev(self, value): self.bits.arch_major_rev = value |
| def get_arch_major_rev(self): value = self.bits.arch_major_rev; return value |
| |
| |
| class status_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("state", c_uint32, 1), |
| ("irq_raised", c_uint32, 1), |
| ("bus_status", c_uint32, 1), |
| ("reset_status", c_uint32, 1), |
| ("cmd_parse_error", c_uint32, 1), |
| ("cmd_end_reached", c_uint32, 1), |
| ("pmu_irq_raised", c_uint32, 1), |
| ("wd_fault", c_uint32, 1), |
| ("ecc_fault", c_uint32, 1), |
| ("reserved0", c_uint32, 2), |
| ("faulting_interface", c_uint32, 1), |
| ("faulting_channel", c_uint32, 4), |
| ("irq_history_mask", c_uint32, 16), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_state(self, value): self.bits.state = value |
| def get_state(self): value = self.bits.state; return value |
| def set_irq_raised(self, value): self.bits.irq_raised = value |
| def get_irq_raised(self): value = self.bits.irq_raised; return value |
| def set_bus_status(self, value): self.bits.bus_status = value |
| def get_bus_status(self): value = self.bits.bus_status; return value |
| def set_reset_status(self, value): self.bits.reset_status = value |
| def get_reset_status(self): value = self.bits.reset_status; return value |
| def set_cmd_parse_error(self, value): self.bits.cmd_parse_error = value |
| def get_cmd_parse_error(self): value = self.bits.cmd_parse_error; return value |
| def set_cmd_end_reached(self, value): self.bits.cmd_end_reached = value |
| def get_cmd_end_reached(self): value = self.bits.cmd_end_reached; return value |
| def set_pmu_irq_raised(self, value): self.bits.pmu_irq_raised = value |
| def get_pmu_irq_raised(self): value = self.bits.pmu_irq_raised; return value |
| def set_wd_fault(self, value): self.bits.wd_fault = value |
| def get_wd_fault(self): value = self.bits.wd_fault; return value |
| def set_ecc_fault(self, value): self.bits.ecc_fault = value |
| def get_ecc_fault(self): value = self.bits.ecc_fault; return value |
| def set_faulting_interface(self, value): self.bits.faulting_interface = value |
| def get_faulting_interface(self): value = self.bits.faulting_interface; return value |
| def set_faulting_channel(self, value): self.bits.faulting_channel = value |
| def get_faulting_channel(self): value = self.bits.faulting_channel; return value |
| def set_irq_history_mask(self, value): self.bits.irq_history_mask = value |
| def get_irq_history_mask(self): value = self.bits.irq_history_mask; return value |
| |
| |
| class cmd_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("transition_to_running_state", c_uint32, 1), |
| ("clear_irq", c_uint32, 1), |
| ("clock_q_enable", c_uint32, 1), |
| ("power_q_enable", c_uint32, 1), |
| ("stop_request", c_uint32, 1), |
| ("reserved0", c_uint32, 11), |
| ("clear_irq_history", c_uint32, 16), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_transition_to_running_state(self, value): self.bits.transition_to_running_state = value |
| def get_transition_to_running_state(self): value = self.bits.transition_to_running_state; return value |
| def set_clear_irq(self, value): self.bits.clear_irq = value |
| def get_clear_irq(self): value = self.bits.clear_irq; return value |
| def set_clock_q_enable(self, value): self.bits.clock_q_enable = value |
| def get_clock_q_enable(self): value = self.bits.clock_q_enable; return value |
| def set_power_q_enable(self, value): self.bits.power_q_enable = value |
| def get_power_q_enable(self): value = self.bits.power_q_enable; return value |
| def set_stop_request(self, value): self.bits.stop_request = value |
| def get_stop_request(self): value = self.bits.stop_request; return value |
| def set_clear_irq_history(self, value): self.bits.clear_irq_history = value |
| def get_clear_irq_history(self): value = self.bits.clear_irq_history; return value |
| |
| |
| class reset_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("pending_cpl", c_uint32, 1), |
| ("pending_csl", c_uint32, 1), |
| ("reserved0", c_uint32, 30), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_pending_cpl(self, value): self.bits.pending_cpl = value |
| def get_pending_cpl(self): value = self.bits.pending_cpl; return value |
| def set_pending_csl(self, value): self.bits.pending_csl = value |
| def get_pending_csl(self): value = self.bits.pending_csl; return value |
| |
| |
| class qbase0_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("qbase0", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_qbase0(self, value): self.bits.qbase0 = value |
| def get_qbase0(self): value = self.bits.qbase0; return value |
| |
| |
| class qbase1_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("qbase1", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_qbase1(self, value): self.bits.qbase1 = value |
| def get_qbase1(self): value = self.bits.qbase1; return value |
| |
| |
| class qread_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("qread", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_qread(self, value): self.bits.qread = value |
| def get_qread(self): value = self.bits.qread; return value |
| |
| |
| class qconfig_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("qconfig", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_qconfig(self, value): self.bits.qconfig = value |
| def get_qconfig(self): value = self.bits.qconfig; return value |
| |
| |
| class qsize_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("qsize", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_qsize(self, value): self.bits.qsize = value |
| def get_qsize(self): value = self.bits.qsize; return value |
| |
| |
| class prot_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("active_cpl", c_uint32, 1), |
| ("active_csl", c_uint32, 1), |
| ("reserved0", c_uint32, 30), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_active_cpl(self, value): self.bits.active_cpl = value |
| def get_active_cpl(self): value = self.bits.active_cpl; return value |
| def set_active_csl(self, value): self.bits.active_csl = value |
| def get_active_csl(self): value = self.bits.active_csl; return value |
| |
| |
| class config_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("macs_per_cc", c_uint32, 4), |
| ("cmd_stream_version", c_uint32, 4), |
| ("shram_size", c_uint32, 8), |
| ("reserved0", c_uint32, 12), |
| ("product", c_uint32, 4), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_macs_per_cc(self, value): self.bits.macs_per_cc = value |
| def get_macs_per_cc(self): value = self.bits.macs_per_cc; return value |
| def set_cmd_stream_version(self, value): self.bits.cmd_stream_version = value |
| def get_cmd_stream_version(self): value = self.bits.cmd_stream_version; return value |
| def set_shram_size(self, value): self.bits.shram_size = value |
| def get_shram_size(self): value = self.bits.shram_size; return value |
| def set_product(self, value): self.bits.product = value |
| def get_product(self): value = self.bits.product; return value |
| |
| |
| class lock_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("lock", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_lock(self, value): self.bits.lock = value |
| def get_lock(self): value = self.bits.lock; return value |
| |
| |
| class regioncfg_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("region0", c_uint32, 2), |
| ("region1", c_uint32, 2), |
| ("region2", c_uint32, 2), |
| ("region3", c_uint32, 2), |
| ("region4", c_uint32, 2), |
| ("region5", c_uint32, 2), |
| ("region6", c_uint32, 2), |
| ("region7", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_region0(self, value): self.bits.region0 = value |
| def get_region0(self): value = self.bits.region0; return value |
| def set_region1(self, value): self.bits.region1 = value |
| def get_region1(self): value = self.bits.region1; return value |
| def set_region2(self, value): self.bits.region2 = value |
| def get_region2(self): value = self.bits.region2; return value |
| def set_region3(self, value): self.bits.region3 = value |
| def get_region3(self): value = self.bits.region3; return value |
| def set_region4(self, value): self.bits.region4 = value |
| def get_region4(self): value = self.bits.region4; return value |
| def set_region5(self, value): self.bits.region5 = value |
| def get_region5(self): value = self.bits.region5; return value |
| def set_region6(self, value): self.bits.region6 = value |
| def get_region6(self): value = self.bits.region6; return value |
| def set_region7(self, value): self.bits.region7 = value |
| def get_region7(self): value = self.bits.region7; return value |
| |
| |
| class axi_limit0_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("max_beats", c_uint32, 2), |
| ("reserved0", c_uint32, 2), |
| ("memtype", c_uint32, 4), |
| ("reserved1", c_uint32, 8), |
| ("max_outstanding_read_m1", c_uint32, 8), |
| ("max_outstanding_write_m1", c_uint32, 8), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_max_beats(self, value): self.bits.max_beats = value |
| def get_max_beats(self): value = self.bits.max_beats; return value |
| def set_memtype(self, value): self.bits.memtype = value |
| def get_memtype(self): value = self.bits.memtype; return value |
| def set_max_outstanding_read_m1(self, value): self.bits.max_outstanding_read_m1 = value |
| def get_max_outstanding_read_m1(self): value = self.bits.max_outstanding_read_m1; return value |
| def set_max_outstanding_write_m1(self, value): self.bits.max_outstanding_write_m1 = value |
| def get_max_outstanding_write_m1(self): value = self.bits.max_outstanding_write_m1; return value |
| |
| |
| class axi_limit1_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("max_beats", c_uint32, 2), |
| ("reserved0", c_uint32, 2), |
| ("memtype", c_uint32, 4), |
| ("reserved1", c_uint32, 8), |
| ("max_outstanding_read_m1", c_uint32, 8), |
| ("max_outstanding_write_m1", c_uint32, 8), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_max_beats(self, value): self.bits.max_beats = value |
| def get_max_beats(self): value = self.bits.max_beats; return value |
| def set_memtype(self, value): self.bits.memtype = value |
| def get_memtype(self): value = self.bits.memtype; return value |
| def set_max_outstanding_read_m1(self, value): self.bits.max_outstanding_read_m1 = value |
| def get_max_outstanding_read_m1(self): value = self.bits.max_outstanding_read_m1; return value |
| def set_max_outstanding_write_m1(self, value): self.bits.max_outstanding_write_m1 = value |
| def get_max_outstanding_write_m1(self): value = self.bits.max_outstanding_write_m1; return value |
| |
| |
| class axi_limit2_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("max_beats", c_uint32, 2), |
| ("reserved0", c_uint32, 2), |
| ("memtype", c_uint32, 4), |
| ("reserved1", c_uint32, 8), |
| ("max_outstanding_read_m1", c_uint32, 8), |
| ("max_outstanding_write_m1", c_uint32, 8), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_max_beats(self, value): self.bits.max_beats = value |
| def get_max_beats(self): value = self.bits.max_beats; return value |
| def set_memtype(self, value): self.bits.memtype = value |
| def get_memtype(self): value = self.bits.memtype; return value |
| def set_max_outstanding_read_m1(self, value): self.bits.max_outstanding_read_m1 = value |
| def get_max_outstanding_read_m1(self): value = self.bits.max_outstanding_read_m1; return value |
| def set_max_outstanding_write_m1(self, value): self.bits.max_outstanding_write_m1 = value |
| def get_max_outstanding_write_m1(self): value = self.bits.max_outstanding_write_m1; return value |
| |
| |
| class axi_limit3_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("max_beats", c_uint32, 2), |
| ("reserved0", c_uint32, 2), |
| ("memtype", c_uint32, 4), |
| ("reserved1", c_uint32, 8), |
| ("max_outstanding_read_m1", c_uint32, 8), |
| ("max_outstanding_write_m1", c_uint32, 8), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_max_beats(self, value): self.bits.max_beats = value |
| def get_max_beats(self): value = self.bits.max_beats; return value |
| def set_memtype(self, value): self.bits.memtype = value |
| def get_memtype(self): value = self.bits.memtype; return value |
| def set_max_outstanding_read_m1(self, value): self.bits.max_outstanding_read_m1 = value |
| def get_max_outstanding_read_m1(self): value = self.bits.max_outstanding_read_m1; return value |
| def set_max_outstanding_write_m1(self, value): self.bits.max_outstanding_write_m1 = value |
| def get_max_outstanding_write_m1(self): value = self.bits.max_outstanding_write_m1; return value |
| |
| |
| class basep0_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep1_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep2_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep3_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep4_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep5_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep6_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep7_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep8_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep9_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep10_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep11_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep12_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep13_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep14_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class basep15_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("addr_word", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_addr_word(self, value): self.bits.addr_word = value |
| def get_addr_word(self): value = self.bits.addr_word; return value |
| |
| |
| class wd_status_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("core_slice_state", c_uint32, 2), |
| ("core_idle", c_uint32, 1), |
| ("ctrl_state", c_uint32, 2), |
| ("ctrl_idle", c_uint32, 1), |
| ("write_buf_index0", c_uint32, 3), |
| ("write_buf_valid0", c_uint32, 1), |
| ("write_buf_idle0", c_uint32, 1), |
| ("write_buf_index1", c_uint32, 3), |
| ("write_buf_valid1", c_uint32, 1), |
| ("write_buf_idle1", c_uint32, 1), |
| ("events", c_uint32, 12), |
| ("reserved0", c_uint32, 4), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_core_slice_state(self, value): self.bits.core_slice_state = value |
| def get_core_slice_state(self): value = self.bits.core_slice_state; return value |
| def set_core_idle(self, value): self.bits.core_idle = value |
| def get_core_idle(self): value = self.bits.core_idle; return value |
| def set_ctrl_state(self, value): self.bits.ctrl_state = value |
| def get_ctrl_state(self): value = self.bits.ctrl_state; return value |
| def set_ctrl_idle(self, value): self.bits.ctrl_idle = value |
| def get_ctrl_idle(self): value = self.bits.ctrl_idle; return value |
| def set_write_buf_index0(self, value): self.bits.write_buf_index0 = value |
| def get_write_buf_index0(self): value = self.bits.write_buf_index0; return value |
| def set_write_buf_valid0(self, value): self.bits.write_buf_valid0 = value |
| def get_write_buf_valid0(self): value = self.bits.write_buf_valid0; return value |
| def set_write_buf_idle0(self, value): self.bits.write_buf_idle0 = value |
| def get_write_buf_idle0(self): value = self.bits.write_buf_idle0; return value |
| def set_write_buf_index1(self, value): self.bits.write_buf_index1 = value |
| def get_write_buf_index1(self): value = self.bits.write_buf_index1; return value |
| def set_write_buf_valid1(self, value): self.bits.write_buf_valid1 = value |
| def get_write_buf_valid1(self): value = self.bits.write_buf_valid1; return value |
| def set_write_buf_idle1(self, value): self.bits.write_buf_idle1 = value |
| def get_write_buf_idle1(self): value = self.bits.write_buf_idle1; return value |
| def set_events(self, value): self.bits.events = value |
| def get_events(self): value = self.bits.events; return value |
| |
| |
| class mac_status_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("block_cfg_valid", c_uint32, 1), |
| ("trav_en", c_uint32, 1), |
| ("wait_for_ib", c_uint32, 1), |
| ("wait_for_acc_buf", c_uint32, 1), |
| ("wait_for_weights", c_uint32, 1), |
| ("stall_stripe", c_uint32, 1), |
| ("dw_sel", c_uint32, 1), |
| ("wait_for_dw0_ready", c_uint32, 1), |
| ("wait_for_dw1_ready", c_uint32, 1), |
| ("acc_buf_sel_ai", c_uint32, 1), |
| ("wait_for_acc0_ready", c_uint32, 1), |
| ("wait_for_acc1_ready", c_uint32, 1), |
| ("acc_buf_sel_aa", c_uint32, 1), |
| ("acc0_valid", c_uint32, 1), |
| ("acc1_valid", c_uint32, 1), |
| ("reserved0", c_uint32, 1), |
| ("events", c_uint32, 11), |
| ("reserved1", c_uint32, 5), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_block_cfg_valid(self, value): self.bits.block_cfg_valid = value |
| def get_block_cfg_valid(self): value = self.bits.block_cfg_valid; return value |
| def set_trav_en(self, value): self.bits.trav_en = value |
| def get_trav_en(self): value = self.bits.trav_en; return value |
| def set_wait_for_ib(self, value): self.bits.wait_for_ib = value |
| def get_wait_for_ib(self): value = self.bits.wait_for_ib; return value |
| def set_wait_for_acc_buf(self, value): self.bits.wait_for_acc_buf = value |
| def get_wait_for_acc_buf(self): value = self.bits.wait_for_acc_buf; return value |
| def set_wait_for_weights(self, value): self.bits.wait_for_weights = value |
| def get_wait_for_weights(self): value = self.bits.wait_for_weights; return value |
| def set_stall_stripe(self, value): self.bits.stall_stripe = value |
| def get_stall_stripe(self): value = self.bits.stall_stripe; return value |
| def set_dw_sel(self, value): self.bits.dw_sel = value |
| def get_dw_sel(self): value = self.bits.dw_sel; return value |
| def set_wait_for_dw0_ready(self, value): self.bits.wait_for_dw0_ready = value |
| def get_wait_for_dw0_ready(self): value = self.bits.wait_for_dw0_ready; return value |
| def set_wait_for_dw1_ready(self, value): self.bits.wait_for_dw1_ready = value |
| def get_wait_for_dw1_ready(self): value = self.bits.wait_for_dw1_ready; return value |
| def set_acc_buf_sel_ai(self, value): self.bits.acc_buf_sel_ai = value |
| def get_acc_buf_sel_ai(self): value = self.bits.acc_buf_sel_ai; return value |
| def set_wait_for_acc0_ready(self, value): self.bits.wait_for_acc0_ready = value |
| def get_wait_for_acc0_ready(self): value = self.bits.wait_for_acc0_ready; return value |
| def set_wait_for_acc1_ready(self, value): self.bits.wait_for_acc1_ready = value |
| def get_wait_for_acc1_ready(self): value = self.bits.wait_for_acc1_ready; return value |
| def set_acc_buf_sel_aa(self, value): self.bits.acc_buf_sel_aa = value |
| def get_acc_buf_sel_aa(self): value = self.bits.acc_buf_sel_aa; return value |
| def set_acc0_valid(self, value): self.bits.acc0_valid = value |
| def get_acc0_valid(self): value = self.bits.acc0_valid; return value |
| def set_acc1_valid(self, value): self.bits.acc1_valid = value |
| def get_acc1_valid(self): value = self.bits.acc1_valid; return value |
| def set_events(self, value): self.bits.events = value |
| def get_events(self): value = self.bits.events; return value |
| |
| |
| class ao_status_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("cmd_sbw_valid", c_uint32, 1), |
| ("cmd_act_valid", c_uint32, 1), |
| ("cmd_ctl_valid", c_uint32, 1), |
| ("cmd_scl_valid", c_uint32, 1), |
| ("cmd_sbr_valid", c_uint32, 1), |
| ("cmd_ofm_valid", c_uint32, 1), |
| ("blk_cmd_ready", c_uint32, 1), |
| ("blk_cmd_valid", c_uint32, 1), |
| ("reserved0", c_uint32, 8), |
| ("events", c_uint32, 8), |
| ("reserved1", c_uint32, 8), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_cmd_sbw_valid(self, value): self.bits.cmd_sbw_valid = value |
| def get_cmd_sbw_valid(self): value = self.bits.cmd_sbw_valid; return value |
| def set_cmd_act_valid(self, value): self.bits.cmd_act_valid = value |
| def get_cmd_act_valid(self): value = self.bits.cmd_act_valid; return value |
| def set_cmd_ctl_valid(self, value): self.bits.cmd_ctl_valid = value |
| def get_cmd_ctl_valid(self): value = self.bits.cmd_ctl_valid; return value |
| def set_cmd_scl_valid(self, value): self.bits.cmd_scl_valid = value |
| def get_cmd_scl_valid(self): value = self.bits.cmd_scl_valid; return value |
| def set_cmd_sbr_valid(self, value): self.bits.cmd_sbr_valid = value |
| def get_cmd_sbr_valid(self): value = self.bits.cmd_sbr_valid; return value |
| def set_cmd_ofm_valid(self, value): self.bits.cmd_ofm_valid = value |
| def get_cmd_ofm_valid(self): value = self.bits.cmd_ofm_valid; return value |
| def set_blk_cmd_ready(self, value): self.bits.blk_cmd_ready = value |
| def get_blk_cmd_ready(self): value = self.bits.blk_cmd_ready; return value |
| def set_blk_cmd_valid(self, value): self.bits.blk_cmd_valid = value |
| def get_blk_cmd_valid(self): value = self.bits.blk_cmd_valid; return value |
| def set_events(self, value): self.bits.events = value |
| def get_events(self): value = self.bits.events; return value |
| |
| |
| class dma_status0_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("cmd_idle", c_uint32, 1), |
| ("ifm_idle", c_uint32, 1), |
| ("wgt_idle_c0", c_uint32, 1), |
| ("bas_idle_c0", c_uint32, 1), |
| ("m2m_idle", c_uint32, 1), |
| ("ofm_idle", c_uint32, 1), |
| ("halt_req", c_uint32, 1), |
| ("halt_ack", c_uint32, 1), |
| ("pause_req", c_uint32, 1), |
| ("pause_ack", c_uint32, 1), |
| ("ib0_ai_valid_c0", c_uint32, 1), |
| ("ib0_ai_ready_c0", c_uint32, 1), |
| ("ib1_ai_valid_c0", c_uint32, 1), |
| ("ib1_ai_ready_c0", c_uint32, 1), |
| ("ib0_ao_valid_c0", c_uint32, 1), |
| ("ib0_ao_ready_c0", c_uint32, 1), |
| ("ib1_ao_valid_c0", c_uint32, 1), |
| ("ib1_ao_ready_c0", c_uint32, 1), |
| ("ob0_valid_c0", c_uint32, 1), |
| ("ob0_ready_c0", c_uint32, 1), |
| ("ob1_valid_c0", c_uint32, 1), |
| ("ob1_ready_c0", c_uint32, 1), |
| ("cmd_valid", c_uint32, 1), |
| ("cmd_ready", c_uint32, 1), |
| ("wd_bitstream_valid_c0", c_uint32, 1), |
| ("wd_bitstream_ready_c0", c_uint32, 1), |
| ("bs_bitstream_valid_c0", c_uint32, 1), |
| ("bs_bitstream_ready_c0", c_uint32, 1), |
| ("axi0_ar_stalled", c_uint32, 1), |
| ("axi0_rd_limit_stall", c_uint32, 1), |
| ("axi0_aw_stalled", c_uint32, 1), |
| ("axi0_w_stalled", c_uint32, 1), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_cmd_idle(self, value): self.bits.cmd_idle = value |
| def get_cmd_idle(self): value = self.bits.cmd_idle; return value |
| def set_ifm_idle(self, value): self.bits.ifm_idle = value |
| def get_ifm_idle(self): value = self.bits.ifm_idle; return value |
| def set_wgt_idle_c0(self, value): self.bits.wgt_idle_c0 = value |
| def get_wgt_idle_c0(self): value = self.bits.wgt_idle_c0; return value |
| def set_bas_idle_c0(self, value): self.bits.bas_idle_c0 = value |
| def get_bas_idle_c0(self): value = self.bits.bas_idle_c0; return value |
| def set_m2m_idle(self, value): self.bits.m2m_idle = value |
| def get_m2m_idle(self): value = self.bits.m2m_idle; return value |
| def set_ofm_idle(self, value): self.bits.ofm_idle = value |
| def get_ofm_idle(self): value = self.bits.ofm_idle; return value |
| def set_halt_req(self, value): self.bits.halt_req = value |
| def get_halt_req(self): value = self.bits.halt_req; return value |
| def set_halt_ack(self, value): self.bits.halt_ack = value |
| def get_halt_ack(self): value = self.bits.halt_ack; return value |
| def set_pause_req(self, value): self.bits.pause_req = value |
| def get_pause_req(self): value = self.bits.pause_req; return value |
| def set_pause_ack(self, value): self.bits.pause_ack = value |
| def get_pause_ack(self): value = self.bits.pause_ack; return value |
| def set_ib0_ai_valid_c0(self, value): self.bits.ib0_ai_valid_c0 = value |
| def get_ib0_ai_valid_c0(self): value = self.bits.ib0_ai_valid_c0; return value |
| def set_ib0_ai_ready_c0(self, value): self.bits.ib0_ai_ready_c0 = value |
| def get_ib0_ai_ready_c0(self): value = self.bits.ib0_ai_ready_c0; return value |
| def set_ib1_ai_valid_c0(self, value): self.bits.ib1_ai_valid_c0 = value |
| def get_ib1_ai_valid_c0(self): value = self.bits.ib1_ai_valid_c0; return value |
| def set_ib1_ai_ready_c0(self, value): self.bits.ib1_ai_ready_c0 = value |
| def get_ib1_ai_ready_c0(self): value = self.bits.ib1_ai_ready_c0; return value |
| def set_ib0_ao_valid_c0(self, value): self.bits.ib0_ao_valid_c0 = value |
| def get_ib0_ao_valid_c0(self): value = self.bits.ib0_ao_valid_c0; return value |
| def set_ib0_ao_ready_c0(self, value): self.bits.ib0_ao_ready_c0 = value |
| def get_ib0_ao_ready_c0(self): value = self.bits.ib0_ao_ready_c0; return value |
| def set_ib1_ao_valid_c0(self, value): self.bits.ib1_ao_valid_c0 = value |
| def get_ib1_ao_valid_c0(self): value = self.bits.ib1_ao_valid_c0; return value |
| def set_ib1_ao_ready_c0(self, value): self.bits.ib1_ao_ready_c0 = value |
| def get_ib1_ao_ready_c0(self): value = self.bits.ib1_ao_ready_c0; return value |
| def set_ob0_valid_c0(self, value): self.bits.ob0_valid_c0 = value |
| def get_ob0_valid_c0(self): value = self.bits.ob0_valid_c0; return value |
| def set_ob0_ready_c0(self, value): self.bits.ob0_ready_c0 = value |
| def get_ob0_ready_c0(self): value = self.bits.ob0_ready_c0; return value |
| def set_ob1_valid_c0(self, value): self.bits.ob1_valid_c0 = value |
| def get_ob1_valid_c0(self): value = self.bits.ob1_valid_c0; return value |
| def set_ob1_ready_c0(self, value): self.bits.ob1_ready_c0 = value |
| def get_ob1_ready_c0(self): value = self.bits.ob1_ready_c0; return value |
| def set_cmd_valid(self, value): self.bits.cmd_valid = value |
| def get_cmd_valid(self): value = self.bits.cmd_valid; return value |
| def set_cmd_ready(self, value): self.bits.cmd_ready = value |
| def get_cmd_ready(self): value = self.bits.cmd_ready; return value |
| def set_wd_bitstream_valid_c0(self, value): self.bits.wd_bitstream_valid_c0 = value |
| def get_wd_bitstream_valid_c0(self): value = self.bits.wd_bitstream_valid_c0; return value |
| def set_wd_bitstream_ready_c0(self, value): self.bits.wd_bitstream_ready_c0 = value |
| def get_wd_bitstream_ready_c0(self): value = self.bits.wd_bitstream_ready_c0; return value |
| def set_bs_bitstream_valid_c0(self, value): self.bits.bs_bitstream_valid_c0 = value |
| def get_bs_bitstream_valid_c0(self): value = self.bits.bs_bitstream_valid_c0; return value |
| def set_bs_bitstream_ready_c0(self, value): self.bits.bs_bitstream_ready_c0 = value |
| def get_bs_bitstream_ready_c0(self): value = self.bits.bs_bitstream_ready_c0; return value |
| def set_axi0_ar_stalled(self, value): self.bits.axi0_ar_stalled = value |
| def get_axi0_ar_stalled(self): value = self.bits.axi0_ar_stalled; return value |
| def set_axi0_rd_limit_stall(self, value): self.bits.axi0_rd_limit_stall = value |
| def get_axi0_rd_limit_stall(self): value = self.bits.axi0_rd_limit_stall; return value |
| def set_axi0_aw_stalled(self, value): self.bits.axi0_aw_stalled = value |
| def get_axi0_aw_stalled(self): value = self.bits.axi0_aw_stalled; return value |
| def set_axi0_w_stalled(self, value): self.bits.axi0_w_stalled = value |
| def get_axi0_w_stalled(self): value = self.bits.axi0_w_stalled; return value |
| |
| |
| class dma_status1_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("axi0_wr_limit_stall", c_uint32, 1), |
| ("axi1_ar_stalled", c_uint32, 1), |
| ("axi1_rd_limit_stall", c_uint32, 1), |
| ("axi1_wr_stalled", c_uint32, 1), |
| ("axi1_w_stalled", c_uint32, 1), |
| ("axi1_wr_limit_stall", c_uint32, 1), |
| ("wgt_idle_c1", c_uint32, 1), |
| ("bas_idle_c1", c_uint32, 1), |
| ("ib0_ai_valid_c1", c_uint32, 1), |
| ("ib0_ai_ready_c1", c_uint32, 1), |
| ("ib1_ai_valid_c1", c_uint32, 1), |
| ("ib1_ai_ready_c1", c_uint32, 1), |
| ("ib0_ao_valid_c1", c_uint32, 1), |
| ("ib0_ao_ready_c1", c_uint32, 1), |
| ("ib1_ao_valid_c1", c_uint32, 1), |
| ("ib1_ao_ready_c1", c_uint32, 1), |
| ("ob0_valid_c1", c_uint32, 1), |
| ("ob0_ready_c1", c_uint32, 1), |
| ("ob1_valid_c1", c_uint32, 1), |
| ("ob1_ready_c1", c_uint32, 1), |
| ("wd_bitstream_valid_c1", c_uint32, 1), |
| ("wd_bitstream_ready_c1", c_uint32, 1), |
| ("bs_bitstream_valid_c1", c_uint32, 1), |
| ("bs_bitstream_ready_c1", c_uint32, 1), |
| ("reserved0", c_uint32, 8), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_axi0_wr_limit_stall(self, value): self.bits.axi0_wr_limit_stall = value |
| def get_axi0_wr_limit_stall(self): value = self.bits.axi0_wr_limit_stall; return value |
| def set_axi1_ar_stalled(self, value): self.bits.axi1_ar_stalled = value |
| def get_axi1_ar_stalled(self): value = self.bits.axi1_ar_stalled; return value |
| def set_axi1_rd_limit_stall(self, value): self.bits.axi1_rd_limit_stall = value |
| def get_axi1_rd_limit_stall(self): value = self.bits.axi1_rd_limit_stall; return value |
| def set_axi1_wr_stalled(self, value): self.bits.axi1_wr_stalled = value |
| def get_axi1_wr_stalled(self): value = self.bits.axi1_wr_stalled; return value |
| def set_axi1_w_stalled(self, value): self.bits.axi1_w_stalled = value |
| def get_axi1_w_stalled(self): value = self.bits.axi1_w_stalled; return value |
| def set_axi1_wr_limit_stall(self, value): self.bits.axi1_wr_limit_stall = value |
| def get_axi1_wr_limit_stall(self): value = self.bits.axi1_wr_limit_stall; return value |
| def set_wgt_idle_c1(self, value): self.bits.wgt_idle_c1 = value |
| def get_wgt_idle_c1(self): value = self.bits.wgt_idle_c1; return value |
| def set_bas_idle_c1(self, value): self.bits.bas_idle_c1 = value |
| def get_bas_idle_c1(self): value = self.bits.bas_idle_c1; return value |
| def set_ib0_ai_valid_c1(self, value): self.bits.ib0_ai_valid_c1 = value |
| def get_ib0_ai_valid_c1(self): value = self.bits.ib0_ai_valid_c1; return value |
| def set_ib0_ai_ready_c1(self, value): self.bits.ib0_ai_ready_c1 = value |
| def get_ib0_ai_ready_c1(self): value = self.bits.ib0_ai_ready_c1; return value |
| def set_ib1_ai_valid_c1(self, value): self.bits.ib1_ai_valid_c1 = value |
| def get_ib1_ai_valid_c1(self): value = self.bits.ib1_ai_valid_c1; return value |
| def set_ib1_ai_ready_c1(self, value): self.bits.ib1_ai_ready_c1 = value |
| def get_ib1_ai_ready_c1(self): value = self.bits.ib1_ai_ready_c1; return value |
| def set_ib0_ao_valid_c1(self, value): self.bits.ib0_ao_valid_c1 = value |
| def get_ib0_ao_valid_c1(self): value = self.bits.ib0_ao_valid_c1; return value |
| def set_ib0_ao_ready_c1(self, value): self.bits.ib0_ao_ready_c1 = value |
| def get_ib0_ao_ready_c1(self): value = self.bits.ib0_ao_ready_c1; return value |
| def set_ib1_ao_valid_c1(self, value): self.bits.ib1_ao_valid_c1 = value |
| def get_ib1_ao_valid_c1(self): value = self.bits.ib1_ao_valid_c1; return value |
| def set_ib1_ao_ready_c1(self, value): self.bits.ib1_ao_ready_c1 = value |
| def get_ib1_ao_ready_c1(self): value = self.bits.ib1_ao_ready_c1; return value |
| def set_ob0_valid_c1(self, value): self.bits.ob0_valid_c1 = value |
| def get_ob0_valid_c1(self): value = self.bits.ob0_valid_c1; return value |
| def set_ob0_ready_c1(self, value): self.bits.ob0_ready_c1 = value |
| def get_ob0_ready_c1(self): value = self.bits.ob0_ready_c1; return value |
| def set_ob1_valid_c1(self, value): self.bits.ob1_valid_c1 = value |
| def get_ob1_valid_c1(self): value = self.bits.ob1_valid_c1; return value |
| def set_ob1_ready_c1(self, value): self.bits.ob1_ready_c1 = value |
| def get_ob1_ready_c1(self): value = self.bits.ob1_ready_c1; return value |
| def set_wd_bitstream_valid_c1(self, value): self.bits.wd_bitstream_valid_c1 = value |
| def get_wd_bitstream_valid_c1(self): value = self.bits.wd_bitstream_valid_c1; return value |
| def set_wd_bitstream_ready_c1(self, value): self.bits.wd_bitstream_ready_c1 = value |
| def get_wd_bitstream_ready_c1(self): value = self.bits.wd_bitstream_ready_c1; return value |
| def set_bs_bitstream_valid_c1(self, value): self.bits.bs_bitstream_valid_c1 = value |
| def get_bs_bitstream_valid_c1(self): value = self.bits.bs_bitstream_valid_c1; return value |
| def set_bs_bitstream_ready_c1(self, value): self.bits.bs_bitstream_ready_c1 = value |
| def get_bs_bitstream_ready_c1(self): value = self.bits.bs_bitstream_ready_c1; return value |
| |
| |
| class clkforce_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("top_level_clk", c_uint32, 1), |
| ("cc_clk", c_uint32, 1), |
| ("dma_clk", c_uint32, 1), |
| ("mac_clk", c_uint32, 1), |
| ("ao_clk", c_uint32, 1), |
| ("wd_clk", c_uint32, 1), |
| ("reserved0", c_uint32, 26), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_top_level_clk(self, value): self.bits.top_level_clk = value |
| def get_top_level_clk(self): value = self.bits.top_level_clk; return value |
| def set_cc_clk(self, value): self.bits.cc_clk = value |
| def get_cc_clk(self): value = self.bits.cc_clk; return value |
| def set_dma_clk(self, value): self.bits.dma_clk = value |
| def get_dma_clk(self): value = self.bits.dma_clk; return value |
| def set_mac_clk(self, value): self.bits.mac_clk = value |
| def get_mac_clk(self): value = self.bits.mac_clk; return value |
| def set_ao_clk(self, value): self.bits.ao_clk = value |
| def get_ao_clk(self): value = self.bits.ao_clk; return value |
| def set_wd_clk(self, value): self.bits.wd_clk = value |
| def get_wd_clk(self): value = self.bits.wd_clk; return value |
| |
| |
| class pid4_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("pid4", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_pid4(self, value): self.bits.pid4 = value |
| def get_pid4(self): value = self.bits.pid4; return value |
| |
| |
| class pid5_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("pid5", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_pid5(self, value): self.bits.pid5 = value |
| def get_pid5(self): value = self.bits.pid5; return value |
| |
| |
| class pid6_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("pid6", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_pid6(self, value): self.bits.pid6 = value |
| def get_pid6(self): value = self.bits.pid6; return value |
| |
| |
| class pid7_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("pid7", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_pid7(self, value): self.bits.pid7 = value |
| def get_pid7(self): value = self.bits.pid7; return value |
| |
| |
| class pid0_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("pid0", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_pid0(self, value): self.bits.pid0 = value |
| def get_pid0(self): value = self.bits.pid0; return value |
| |
| |
| class pid1_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("pid1", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_pid1(self, value): self.bits.pid1 = value |
| def get_pid1(self): value = self.bits.pid1; return value |
| |
| |
| class pid2_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("pid2", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_pid2(self, value): self.bits.pid2 = value |
| def get_pid2(self): value = self.bits.pid2; return value |
| |
| |
| class pid3_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("pid3", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_pid3(self, value): self.bits.pid3 = value |
| def get_pid3(self): value = self.bits.pid3; return value |
| |
| |
| class cid0_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("cid0", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_cid0(self, value): self.bits.cid0 = value |
| def get_cid0(self): value = self.bits.cid0; return value |
| |
| |
| class cid1_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("cid1", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_cid1(self, value): self.bits.cid1 = value |
| def get_cid1(self): value = self.bits.cid1; return value |
| |
| |
| class cid2_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("cid2", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_cid2(self, value): self.bits.cid2 = value |
| def get_cid2(self): value = self.bits.cid2; return value |
| |
| |
| class cid3_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("cid3", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_cid3(self, value): self.bits.cid3 = value |
| def get_cid3(self): value = self.bits.cid3; return value |
| |
| |
| class pmcr_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("cnt_en", c_uint32, 1), |
| ("event_cnt_rst", c_uint32, 1), |
| ("cycle_cnt_rst", c_uint32, 1), |
| ("mask_en", c_uint32, 1), |
| ("reserved0", c_uint32, 7), |
| ("num_event_cnt", c_uint32, 5), |
| ("reserved1", c_uint32, 16), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_cnt_en(self, value): self.bits.cnt_en = value |
| def get_cnt_en(self): value = self.bits.cnt_en; return value |
| def set_event_cnt_rst(self, value): self.bits.event_cnt_rst = value |
| def get_event_cnt_rst(self): value = self.bits.event_cnt_rst; return value |
| def set_cycle_cnt_rst(self, value): self.bits.cycle_cnt_rst = value |
| def get_cycle_cnt_rst(self): value = self.bits.cycle_cnt_rst; return value |
| def set_mask_en(self, value): self.bits.mask_en = value |
| def get_mask_en(self): value = self.bits.mask_en; return value |
| def set_num_event_cnt(self, value): self.bits.num_event_cnt = value |
| def get_num_event_cnt(self): value = self.bits.num_event_cnt; return value |
| |
| |
| class pmcntenset_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("event_cnt_0", c_uint32, 1), |
| ("event_cnt_1", c_uint32, 1), |
| ("event_cnt_2", c_uint32, 1), |
| ("event_cnt_3", c_uint32, 1), |
| ("reserved0", c_uint32, 27), |
| ("cycle_cnt", c_uint32, 1), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_event_cnt_0(self, value): self.bits.event_cnt_0 = value |
| def get_event_cnt_0(self): value = self.bits.event_cnt_0; return value |
| def set_event_cnt_1(self, value): self.bits.event_cnt_1 = value |
| def get_event_cnt_1(self): value = self.bits.event_cnt_1; return value |
| def set_event_cnt_2(self, value): self.bits.event_cnt_2 = value |
| def get_event_cnt_2(self): value = self.bits.event_cnt_2; return value |
| def set_event_cnt_3(self, value): self.bits.event_cnt_3 = value |
| def get_event_cnt_3(self): value = self.bits.event_cnt_3; return value |
| def set_cycle_cnt(self, value): self.bits.cycle_cnt = value |
| def get_cycle_cnt(self): value = self.bits.cycle_cnt; return value |
| |
| |
| class pmcntenclr_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("event_cnt_0", c_uint32, 1), |
| ("event_cnt_1", c_uint32, 1), |
| ("event_cnt_2", c_uint32, 1), |
| ("event_cnt_3", c_uint32, 1), |
| ("reserved0", c_uint32, 27), |
| ("cycle_cnt", c_uint32, 1), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_event_cnt_0(self, value): self.bits.event_cnt_0 = value |
| def get_event_cnt_0(self): value = self.bits.event_cnt_0; return value |
| def set_event_cnt_1(self, value): self.bits.event_cnt_1 = value |
| def get_event_cnt_1(self): value = self.bits.event_cnt_1; return value |
| def set_event_cnt_2(self, value): self.bits.event_cnt_2 = value |
| def get_event_cnt_2(self): value = self.bits.event_cnt_2; return value |
| def set_event_cnt_3(self, value): self.bits.event_cnt_3 = value |
| def get_event_cnt_3(self): value = self.bits.event_cnt_3; return value |
| def set_cycle_cnt(self, value): self.bits.cycle_cnt = value |
| def get_cycle_cnt(self): value = self.bits.cycle_cnt; return value |
| |
| |
| class pmovsset_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("event_cnt_0_ovf", c_uint32, 1), |
| ("event_cnt_1_ovf", c_uint32, 1), |
| ("event_cnt_2_ovf", c_uint32, 1), |
| ("event_cnt_3_ovf", c_uint32, 1), |
| ("reserved0", c_uint32, 27), |
| ("cycle_cnt_ovf", c_uint32, 1), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_event_cnt_0_ovf(self, value): self.bits.event_cnt_0_ovf = value |
| def get_event_cnt_0_ovf(self): value = self.bits.event_cnt_0_ovf; return value |
| def set_event_cnt_1_ovf(self, value): self.bits.event_cnt_1_ovf = value |
| def get_event_cnt_1_ovf(self): value = self.bits.event_cnt_1_ovf; return value |
| def set_event_cnt_2_ovf(self, value): self.bits.event_cnt_2_ovf = value |
| def get_event_cnt_2_ovf(self): value = self.bits.event_cnt_2_ovf; return value |
| def set_event_cnt_3_ovf(self, value): self.bits.event_cnt_3_ovf = value |
| def get_event_cnt_3_ovf(self): value = self.bits.event_cnt_3_ovf; return value |
| def set_cycle_cnt_ovf(self, value): self.bits.cycle_cnt_ovf = value |
| def get_cycle_cnt_ovf(self): value = self.bits.cycle_cnt_ovf; return value |
| |
| |
| class pmovsclr_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("event_cnt_0_ovf", c_uint32, 1), |
| ("event_cnt_1_ovf", c_uint32, 1), |
| ("event_cnt_2_ovf", c_uint32, 1), |
| ("event_cnt_3_ovf", c_uint32, 1), |
| ("reserved0", c_uint32, 27), |
| ("cycle_cnt_ovf", c_uint32, 1), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_event_cnt_0_ovf(self, value): self.bits.event_cnt_0_ovf = value |
| def get_event_cnt_0_ovf(self): value = self.bits.event_cnt_0_ovf; return value |
| def set_event_cnt_1_ovf(self, value): self.bits.event_cnt_1_ovf = value |
| def get_event_cnt_1_ovf(self): value = self.bits.event_cnt_1_ovf; return value |
| def set_event_cnt_2_ovf(self, value): self.bits.event_cnt_2_ovf = value |
| def get_event_cnt_2_ovf(self): value = self.bits.event_cnt_2_ovf; return value |
| def set_event_cnt_3_ovf(self, value): self.bits.event_cnt_3_ovf = value |
| def get_event_cnt_3_ovf(self): value = self.bits.event_cnt_3_ovf; return value |
| def set_cycle_cnt_ovf(self, value): self.bits.cycle_cnt_ovf = value |
| def get_cycle_cnt_ovf(self): value = self.bits.cycle_cnt_ovf; return value |
| |
| |
| class pmintset_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("event_cnt_0_int", c_uint32, 1), |
| ("event_cnt_1_int", c_uint32, 1), |
| ("event_cnt_2_int", c_uint32, 1), |
| ("event_cnt_3_int", c_uint32, 1), |
| ("reserved0", c_uint32, 27), |
| ("cycle_cnt_int", c_uint32, 1), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_event_cnt_0_int(self, value): self.bits.event_cnt_0_int = value |
| def get_event_cnt_0_int(self): value = self.bits.event_cnt_0_int; return value |
| def set_event_cnt_1_int(self, value): self.bits.event_cnt_1_int = value |
| def get_event_cnt_1_int(self): value = self.bits.event_cnt_1_int; return value |
| def set_event_cnt_2_int(self, value): self.bits.event_cnt_2_int = value |
| def get_event_cnt_2_int(self): value = self.bits.event_cnt_2_int; return value |
| def set_event_cnt_3_int(self, value): self.bits.event_cnt_3_int = value |
| def get_event_cnt_3_int(self): value = self.bits.event_cnt_3_int; return value |
| def set_cycle_cnt_int(self, value): self.bits.cycle_cnt_int = value |
| def get_cycle_cnt_int(self): value = self.bits.cycle_cnt_int; return value |
| |
| |
| class pmintclr_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("event_cnt_0_int", c_uint32, 1), |
| ("event_cnt_1_int", c_uint32, 1), |
| ("event_cnt_2_int", c_uint32, 1), |
| ("event_cnt_3_int", c_uint32, 1), |
| ("reserved0", c_uint32, 27), |
| ("cycle_cnt_int", c_uint32, 1), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_event_cnt_0_int(self, value): self.bits.event_cnt_0_int = value |
| def get_event_cnt_0_int(self): value = self.bits.event_cnt_0_int; return value |
| def set_event_cnt_1_int(self, value): self.bits.event_cnt_1_int = value |
| def get_event_cnt_1_int(self): value = self.bits.event_cnt_1_int; return value |
| def set_event_cnt_2_int(self, value): self.bits.event_cnt_2_int = value |
| def get_event_cnt_2_int(self): value = self.bits.event_cnt_2_int; return value |
| def set_event_cnt_3_int(self, value): self.bits.event_cnt_3_int = value |
| def get_event_cnt_3_int(self): value = self.bits.event_cnt_3_int; return value |
| def set_cycle_cnt_int(self, value): self.bits.cycle_cnt_int = value |
| def get_cycle_cnt_int(self): value = self.bits.cycle_cnt_int; return value |
| |
| |
| class pmccntr_lo_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("cycle_cnt_lo", c_uint32, 32), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_cycle_cnt_lo(self, value): self.bits.cycle_cnt_lo = value |
| def get_cycle_cnt_lo(self): value = self.bits.cycle_cnt_lo; return value |
| |
| |
| class pmccntr_hi_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("cycle_cnt_hi", c_uint32, 16), |
| ("reserved0", c_uint32, 16), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_cycle_cnt_hi(self, value): self.bits.cycle_cnt_hi = value |
| def get_cycle_cnt_hi(self): value = self.bits.cycle_cnt_hi; return value |
| |
| |
| class pmccntr_cfg_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("cycle_cnt_cfg_start", c_uint32, 10), |
| ("reserved0", c_uint32, 6), |
| ("cycle_cnt_cfg_stop", c_uint32, 10), |
| ("reserved1", c_uint32, 6), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_cycle_cnt_cfg_start(self, value): self.bits.cycle_cnt_cfg_start = value |
| def get_cycle_cnt_cfg_start(self): value = self.bits.cycle_cnt_cfg_start; return value |
| def set_cycle_cnt_cfg_stop(self, value): self.bits.cycle_cnt_cfg_stop = value |
| def get_cycle_cnt_cfg_stop(self): value = self.bits.cycle_cnt_cfg_stop; return value |
| |
| |
| class pmcaxi_chan_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("ch_sel", c_uint32, 4), |
| ("reserved0", c_uint32, 4), |
| ("axi_cnt_sel", c_uint32, 2), |
| ("bw_ch_sel_en", c_uint32, 1), |
| ("reserved1", c_uint32, 21), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_ch_sel(self, value): self.bits.ch_sel = value |
| def get_ch_sel(self): value = self.bits.ch_sel; return value |
| def set_axi_cnt_sel(self, value): self.bits.axi_cnt_sel = value |
| def get_axi_cnt_sel(self): value = self.bits.axi_cnt_sel; return value |
| def set_bw_ch_sel_en(self, value): self.bits.bw_ch_sel_en = value |
| def get_bw_ch_sel_en(self): value = self.bits.bw_ch_sel_en; return value |
| |
| |
| class pmevtyper0_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("ev_type", c_uint32, 10), |
| ("reserved0", c_uint32, 22), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_ev_type(self, value): self.bits.ev_type = value |
| def get_ev_type(self): value = self.bits.ev_type; return value |
| |
| |
| class pmevtyper1_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("ev_type", c_uint32, 10), |
| ("reserved0", c_uint32, 22), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_ev_type(self, value): self.bits.ev_type = value |
| def get_ev_type(self): value = self.bits.ev_type; return value |
| |
| |
| class pmevtyper2_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("ev_type", c_uint32, 10), |
| ("reserved0", c_uint32, 22), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_ev_type(self, value): self.bits.ev_type = value |
| def get_ev_type(self): value = self.bits.ev_type; return value |
| |
| |
| class pmevtyper3_r(Union): |
| class _bitfield(Structure): |
| _fields_ = [ |
| ("ev_type", c_uint32, 10), |
| ("reserved0", c_uint32, 22), |
| ] |
| _fields_ = [("bits", _bitfield), |
| ("word", c_uint32)] |
| def set_ev_type(self, value): self.bits.ev_type = value |
| def get_ev_type(self): value = self.bits.ev_type; return value |
| |
| class command_no_payload_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class command_with_payload_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("param", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_op_stop_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("mask", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_OP_STOP and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_mask(self): return mask |
| def set_mask(self, value): mask = value |
| |
| class npu_op_irq_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("mask", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_OP_IRQ and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_mask(self): return mask |
| def set_mask(self, value): mask = value |
| |
| class npu_op_conv_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("reserved0", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_OP_CONV and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| |
| class npu_op_depthwise_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("reserved0", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_OP_DEPTHWISE and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| |
| class npu_op_pool_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("mode", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_OP_POOL and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_mode(self): return mode |
| def set_mode(self, value): mode = value |
| |
| class npu_op_elementwise_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("mode", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_OP_ELEMENTWISE and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_mode(self): return mode |
| def set_mode(self, value): mode = value |
| |
| class npu_op_dma_start_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("channel_mode", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_OP_DMA_START and must_be_zero0==0; |
| def get_channel_mode(self): return channel_mode |
| def set_channel_mode(self, value): channel_mode = value |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| |
| class npu_op_dma_wait_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("reserved0", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_OP_DMA_WAIT and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| |
| class npu_op_kernel_wait_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_OP_KERNEL_WAIT and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_op_pmu_mask_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_OP_PMU_MASK and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm_pad_top_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM_PAD_TOP and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm_pad_left_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM_PAD_LEFT and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm_pad_right_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM_PAD_RIGHT and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm_pad_bottom_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM_PAD_BOTTOM and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm_depth_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM_DEPTH_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm_precision_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("precision", c_uint32, 4), |
| ("reserved0", c_uint32, 2), |
| ("format", c_uint32, 2), |
| ("scale_mode", c_uint32, 2), |
| ("reserved1", c_uint32, 4), |
| ("round_mode", c_uint32, 2), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM_PRECISION and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_format(self): return format |
| def set_format(self, value): format = value |
| def get_precision(self): return precision |
| def set_precision(self, value): precision = value |
| def get_round_mode(self): return round_mode |
| def set_round_mode(self, value): round_mode = value |
| def get_scale_mode(self): return scale_mode |
| def set_scale_mode(self, value): scale_mode = value |
| |
| class npu_set_ifm_upscale_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("mode", c_uint32, 2), |
| ("reserved0", c_uint32, 14), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM_UPSCALE and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_mode(self): return mode |
| def set_mode(self, value): mode = value |
| |
| class npu_set_ifm_zero_point_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM_ZERO_POINT and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm_width0_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM_WIDTH0_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm_height0_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM_HEIGHT0_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm_height1_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM_HEIGHT1_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm_ib_end_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM_IB_END and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm_region_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM_REGION and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ofm_width_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_OFM_WIDTH_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ofm_height_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_OFM_HEIGHT_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ofm_depth_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_OFM_DEPTH_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ofm_precision_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("precision", c_uint32, 3), |
| ("reserved0", c_uint32, 3), |
| ("format", c_uint32, 2), |
| ("scaling", c_uint32, 1), |
| ("reserved1", c_uint32, 5), |
| ("rounding", c_uint32, 2), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_OFM_PRECISION and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_format(self): return format |
| def set_format(self, value): format = value |
| def get_precision(self): return precision |
| def set_precision(self, value): precision = value |
| def get_rounding(self): return rounding |
| def set_rounding(self, value): rounding = value |
| def get_scaling(self): return scaling |
| def set_scaling(self, value): scaling = value |
| |
| class npu_set_ofm_blk_width_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_OFM_BLK_WIDTH_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ofm_blk_height_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_OFM_BLK_HEIGHT_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ofm_blk_depth_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_OFM_BLK_DEPTH_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ofm_zero_point_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_OFM_ZERO_POINT and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ofm_width0_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_OFM_WIDTH0_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ofm_height0_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_OFM_HEIGHT0_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ofm_height1_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_OFM_HEIGHT1_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ofm_region_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_OFM_REGION and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_kernel_width_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_KERNEL_WIDTH_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_kernel_height_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_KERNEL_HEIGHT_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_kernel_stride_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_KERNEL_STRIDE and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_parallel_mode_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_PARALLEL_MODE and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_acc_format_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_ACC_FORMAT and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_activation_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("type", c_uint32, 12), |
| ("act_clip_range", c_uint32, 4), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_ACTIVATION and must_be_zero0==0; |
| def get_act_clip_range(self): return act_clip_range |
| def set_act_clip_range(self, value): act_clip_range = value |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_type(self): return type |
| def set_type(self, value): type = value |
| |
| class npu_set_activation_min_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_ACTIVATION_MIN and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_activation_max_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_ACTIVATION_MAX and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_weight_region_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_WEIGHT_REGION and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_scale_region_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_SCALE_REGION and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ab_start_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_AB_START and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_blockdep_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_BLOCKDEP and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_dma0_src_region_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("region", c_uint32, 8), |
| ("internal", c_uint32, 1), |
| ("stride_mode", c_uint32, 2), |
| ("reserved0", c_uint32, 5), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_DMA0_SRC_REGION and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_internal(self): return internal |
| def set_internal(self, value): internal = value |
| def get_region(self): return region |
| def set_region(self, value): region = value |
| def get_stride_mode(self): return stride_mode |
| def set_stride_mode(self, value): stride_mode = value |
| |
| class npu_set_dma0_dst_region_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("region", c_uint32, 8), |
| ("internal", c_uint32, 1), |
| ("stride_mode", c_uint32, 2), |
| ("reserved0", c_uint32, 5), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_DMA0_DST_REGION and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_internal(self): return internal |
| def set_internal(self, value): internal = value |
| def get_region(self): return region |
| def set_region(self, value): region = value |
| def get_stride_mode(self): return stride_mode |
| def set_stride_mode(self, value): stride_mode = value |
| |
| class npu_set_dma0_size0_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_DMA0_SIZE0 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_dma0_size1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_DMA0_SIZE1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm2_broadcast_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("broadcast_height", c_uint32, 1), |
| ("broadcast_width", c_uint32, 1), |
| ("broadcast_depth", c_uint32, 1), |
| ("reserved0", c_uint32, 3), |
| ("operand_order", c_uint32, 1), |
| ("broadcast_scalar", c_uint32, 1), |
| ("reserved1", c_uint32, 8), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM2_BROADCAST and must_be_zero0==0; |
| def get_broadcast_depth(self): return broadcast_depth |
| def set_broadcast_depth(self, value): broadcast_depth = value |
| def get_broadcast_height(self): return broadcast_height |
| def set_broadcast_height(self, value): broadcast_height = value |
| def get_broadcast_scalar(self): return broadcast_scalar |
| def set_broadcast_scalar(self, value): broadcast_scalar = value |
| def get_broadcast_width(self): return broadcast_width |
| def set_broadcast_width(self, value): broadcast_width = value |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_operand_order(self): return operand_order |
| def set_operand_order(self, value): operand_order = value |
| |
| class npu_set_ifm2_scalar_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM2_SCALAR and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm2_precision_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("precision", c_uint32, 4), |
| ("reserved0", c_uint32, 2), |
| ("format", c_uint32, 2), |
| ("reserved1", c_uint32, 8), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM2_PRECISION and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_format(self): return format |
| def set_format(self, value): format = value |
| def get_precision(self): return precision |
| def set_precision(self, value): precision = value |
| |
| class npu_set_ifm2_zero_point_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM2_ZERO_POINT and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm2_width0_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM2_WIDTH0_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm2_height0_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM2_HEIGHT0_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm2_height1_m1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM2_HEIGHT1_M1 and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm2_ib_start_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM2_IB_START and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm2_region_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero0", c_uint32, 6), |
| ("param", c_uint32, 16), |
| ] |
| def valid(self): return cmd_code==cmd0.NPU_SET_IFM2_REGION and must_be_zero0==0; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| |
| class npu_set_ifm_base0_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_IFM_BASE0 and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ifm_base1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_IFM_BASE1 and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ifm_base2_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_IFM_BASE2 and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ifm_base3_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_IFM_BASE3 and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ifm_stride_x_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_IFM_STRIDE_X and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ifm_stride_y_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_IFM_STRIDE_Y and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ifm_stride_c_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_IFM_STRIDE_C and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ofm_base0_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_OFM_BASE0 and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ofm_base1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_OFM_BASE1 and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ofm_base2_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_OFM_BASE2 and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ofm_base3_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_OFM_BASE3 and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ofm_stride_x_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_OFM_STRIDE_X and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ofm_stride_y_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_OFM_STRIDE_Y and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ofm_stride_c_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_OFM_STRIDE_C and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_weight_base_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_WEIGHT_BASE and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_weight_length_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_WEIGHT_LENGTH and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_scale_base_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_SCALE_BASE and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_scale_length_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_SCALE_LENGTH and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ofm_scale_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("shift", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_OFM_SCALE and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| def get_shift(self): return shift |
| def set_shift(self, value): shift = value |
| |
| class npu_set_opa_scale_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("shift", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_OPA_SCALE and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| def get_shift(self): return shift |
| def set_shift(self, value): shift = value |
| |
| class npu_set_opb_scale_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_OPB_SCALE and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_dma0_src_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_DMA0_SRC and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_dma0_dst_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_DMA0_DST and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_dma0_len_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_DMA0_LEN and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_dma0_skip0_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("param", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_DMA0_SKIP0 and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_dma0_skip1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("param", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_DMA0_SKIP1 and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ifm2_base0_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_IFM2_BASE0 and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ifm2_base1_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_IFM2_BASE1 and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ifm2_base2_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_IFM2_BASE2 and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ifm2_base3_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_IFM2_BASE3 and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ifm2_stride_x_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_IFM2_STRIDE_X and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ifm2_stride_y_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_IFM2_STRIDE_Y and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_ifm2_stride_c_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_IFM2_STRIDE_C and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_weight1_base_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("param", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_WEIGHT1_BASE and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_weight1_length_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_WEIGHT1_LENGTH and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_scale1_base_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("param", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_SCALE1_BASE and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_param(self): return param |
| def set_param(self, value): param = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |
| class npu_set_scale1_length_t(Structure): |
| _fields_ = [ |
| ("cmd_code", c_uint32, 10), |
| ("must_be_zero", c_uint32, 4), |
| ("payload_size", c_uint32, 2), |
| ("reserved0", c_uint32, 16), |
| ("data", c_uint32, 32), |
| ] |
| def valid(self): return cmd_code==cmd1.NPU_SET_SCALE1_LENGTH and must_be_zero==0 and payload_size>=1 and payload_size<=2; |
| def get_cmd_code(self): return cmd_code |
| def set_cmd_code(self, value): cmd_code = value |
| def get_data(self): return data |
| def set_data(self, value): data = value |
| def get_payload_size(self): return payload_size |
| def set_payload_size(self, value): payload_size = value |
| |